On 12.06.2015 14:43, Javier Martinez Canillas wrote:
> The Exynos interrupt combiner IP loses its state when the SoC enters
> into a low power state during a Suspend-to-RAM. This means that if a
> IRQ is used as a source, the interrupts for the devices are disabled
> when the system is resumed from
Hello Krzysztof,
On Fri, Jun 12, 2015 at 3:53 AM, Krzysztof Kozlowski
wrote:
> The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver.
> However TSADC is present only on Exynos4210 so on Trats2 board (with
> Exynos4412 SoC) the exynos-adc driver could not be probed:
>ERROR: co
The Exynos interrupt combiner IP loses its state when the SoC enters
into a low power state during a Suspend-to-RAM. This means that if a
IRQ is used as a source, the interrupts for the devices are disabled
when the system is resumed from a sleep state so are not triggered.
Save the interrupt enab
The TSADC gate clock was used in Exynos4x12 DTSI for exynos-adc driver.
However TSADC is present only on Exynos4210 so on Trats2 board (with
Exynos4412 SoC) the exynos-adc driver could not be probed:
ERROR: could not get clock /adc@126C:adc(0)
exynos-adc 126c.adc: failed getting clock
On Thu, Jun 11, 2015 at 4:35 PM, Krzysztof Kozlowski
wrote:
> W dniu 12.06.2015 o 06:48, Kevin Hilman pisze:
>> Hi Krzysztof,
>>
>> On Sat, Jun 6, 2015 at 3:02 AM, Krzysztof Kozlowski
>> wrote:
>>> Extend the Exynos entry to ARM64 device tree sources.
>>>
>>> Cc: Catalin Marinas
>>> Cc: Will Dea
W dniu 12.06.2015 o 06:48, Kevin Hilman pisze:
> Hi Krzysztof,
>
> On Sat, Jun 6, 2015 at 3:02 AM, Krzysztof Kozlowski
> wrote:
>> Extend the Exynos entry to ARM64 device tree sources.
>>
>> Cc: Catalin Marinas
>> Cc: Will Deacon
>> Cc: Russell King
>> Cc: Kukjin Kim
>> Cc: Kevin Hilman
>> C
Hi,
Am Dienstag, 21. April 2015, 15:17:51 schrieb Bartlomiej Zolnierkiewicz:
> Add cluster regulator support as a preparation to adding
> generic arm_big_little_dt cpufreq_dt driver support for
> ODROID-XU3 board. This allows arm_big_little[_dt] driver
> to set not only the frequency but also the
Kukjin Kim writes:
> The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:
>
> Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> tags/samsung-dt-3
>
> for you
Hi Krzysztof,
On Sat, Jun 6, 2015 at 3:02 AM, Krzysztof Kozlowski
wrote:
> Extend the Exynos entry to ARM64 device tree sources.
>
> Cc: Catalin Marinas
> Cc: Will Deacon
> Cc: Russell King
> Cc: Kukjin Kim
> Cc: Kevin Hilman
> Cc: Arnd Bergmann
> Cc: Olof Johansson
> Cc: linux-samsung-soc
Kukjin Kim writes:
> Hi,
>
> Here is Samsung mach updates for v4.2 and this is based on v4.1-rc4
> because of dependencies with previous Samsung fixes during -rc
>
> Please pull and if any problems, please let me know.
>
> Thanks,
> Kukjin
>
>
> The following changes since commit e26081808edadfd2
Kukjin Kim writes:
> Hi,
>
> Here is Samsung mach updates for v4.2 and this is based on v4.1-rc4
> because of dependencies with previous Samsung fixes during -rc
>
> Please pull and if any problems, please let me know.
>
> Thanks,
> Kukjin
>
>
> The following changes since commit e26081808edadfd2
Kukjin Kim writes:
> Hi,
>
> Here is another Samsung DT updates for v4.2 but this is based on
> v4.1-rc6 + previous tags/samsung-dt-3 because this touches all of exynos
> DT stuff and some fixes have been merged until -rc6...
In the future, it would be helpful to describe what fixes from -rc6 th
Kukjin Kim writes:
> Hi,
>
> Here is 2nd defconfig updates for v4.2 but actually just one patch for
> Samsung updates for multi_v7_defconfig. Please pull or apply the patch
> directly, anyway I'm fine either way.
>
> Note that this is based on arm-soc/next/defconfig to avoid useless merge
> confl
Kukjin Kim writes:
> Hi Arnd, Olof, Kevin
>
> Here is exynos_defconfig updates for v4.2.
> Please pull.
>
> Thanks,
> Kukjin
>
> The following changes since commit 030bbdbf4c833bc69f502eae58498bc5572db736:
>
> Linux 4.1-rc3 (2015-05-10 15:12:29 -0700)
>
> are available in the git repository at:
Hi,
On Mon, Jun 8, 2015 at 8:47 PM, Alan Stern wrote:
> On Mon, 8 Jun 2015, Vivek Gautam wrote:
>
>> Facilitate getting required 3.3V and 1.0V VDD supply for
>> EHCI controller on Exynos.
>>
>> For example, patches for regulators' nodes:
>> c8c253f ARM: dts: Add regulator entries to smdk5420
>>
Am 11.06.2015 um 14:30 schrieb Linus Walleij:
On Thu, Jun 11, 2015 at 12:17 PM, Alexander Holler wrote:
Am 11.06.2015 um 10:12 schrieb Linus Walleij:
On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler
wrote:
You would end up with the same problem of deadlocks as currently, and you
would st
We allocate sizeof("-grp") which is 5 bytes but then we pass 4 to the
snprintf() so the last 'p' char is truncated away.
The kzalloc() can be made into kmalloc() since we are going to fill
the whole buffer. But I know that Walter Harms is going to grumble if I
don't use kasprintf(). :P And also
On 2015년 06월 03일 17:26, Marek Szyprowski wrote:
> One should not do any assumptions on the stare of the fimd hardware
> during driver initialization, so to properly reset fimd before enabling
> IOMMU, one should ensure that all power domains and clocks are really
> enabled. This patch adds pm_runti
On 2015년 06월 09일 12:45, Hyungwon Hwang wrote:
> FIMC & GSC driver can calculate the offset of planes. So there are
> use cases which IPP receives just one GEM handle of an image with
> multiple plane. This patch extends ipp_validate_mem_node() to validate
> this case.
Applied.
Thanks,
Inki Dae
>
On 2015년 06월 09일 12:19, Hyungwon Hwang wrote:
> exynos_dsi_host_transfer() can be called through a panel driver while
> DSI is turning down. It is possible because the function checks only
> whether DSI is initialized or not, and there is a moment which DSI is
> set by uninitialized, but DSI is sti
On 2015년 06월 09일 12:45, Hyungwon Hwang wrote:
> Config depends on the opreation. So it must be referenced by an
> operation id, not a property id.
Applied.
Thanks,
Inki Dae
>
> Signed-off-by: Hyungwon Hwang
> ---
> drivers/gpu/drm/exynos/exynos_drm_ipp.c | 3 +--
> 1 file changed, 1 insertion
On 2015년 06월 08일 19:15, Andrzej Hajda wrote:
> Code registering different drivers and simple platform devices was dispersed
> across multiple sub-modules. This patch moves it to one place. As a result
> initialization code is shorter and cleaner and should simplify further
> development.
Applied a
On 2015년 06월 04일 05:17, Gustavo Padovan wrote:
> From: Gustavo Padovan
>
> Check error and call DRM_ERROR if clk_prepare_enable() fails.
Applied.
Thanks,
Inki Dae
>
> Signed-off-by: Gustavo Padovan
> ---
> drivers/gpu/drm/exynos/exynos7_drm_decon.c | 28 +++
> driver
Hi Joonyoung,
2015-06-11 Joonyoung Shim :
> On 06/10/2015 10:36 PM, Gustavo Padovan wrote:
> > Hi Marek,
> >
> > 2015-06-10 Marek Szyprowski :
> >
> >> Hello,
> >>
> >> On 2015-06-01 17:04, Gustavo Padovan wrote:
> >>> From: Gustavo Padovan
> >>>
> >>> Hi,
> >>>
> >>> Here goes the full suppor
2015-06-11 21:40 GMT+09:00 Krzysztof Kozlowski :
> W dniu 11.06.2015 o 21:15, Javier Martinez Canillas pisze:
>> Hello Krzysztof,
>>
>> On Thu, Jun 11, 2015 at 12:43 PM, Krzysztof Kozlowski
>> wrote:
>>> W dniu 11.06.2015 o 17:26, Krzysztof Kozlowski pisze:
Add proper gate clock for the Analo
On 06/11/2015 12:17 PM, Alexander Holler wrote:
> Am 11.06.2015 um 10:12 schrieb Linus Walleij:
>> On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler
>> wrote:
>>> Am 10.06.2015 um 09:30 schrieb Linus Walleij:
>>
i2c host comes out, probes the regulator driver, regulator driver
probes a
Hello Krzysztof,
On Thu, Jun 11, 2015 at 2:40 PM, Krzysztof Kozlowski
wrote:
> W dniu 11.06.2015 o 21:15, Javier Martinez Canillas pisze:
>> Hello Krzysztof,
>>
>> On Thu, Jun 11, 2015 at 12:43 PM, Krzysztof Kozlowski
>> wrote:
>>> W dniu 11.06.2015 o 17:26, Krzysztof Kozlowski pisze:
Add p
W dniu 11.06.2015 o 21:15, Javier Martinez Canillas pisze:
> Hello Krzysztof,
>
> On Thu, Jun 11, 2015 at 12:43 PM, Krzysztof Kozlowski
> wrote:
>> W dniu 11.06.2015 o 17:26, Krzysztof Kozlowski pisze:
>>> Add proper gate clock for the Analog to Digital Converter (ADC) on
>>> Exynos4x12.
>>>
>>>
On Thu, Jun 11, 2015 at 12:17 PM, Alexander Holler wrote:
> Am 11.06.2015 um 10:12 schrieb Linus Walleij:
>> On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler
>> wrote:
>>> You would end up with the same problem of deadlocks as currently, and you
>>> would still need something ugly like the def
Hello Krzysztof,
On Thu, Jun 11, 2015 at 12:43 PM, Krzysztof Kozlowski
wrote:
> W dniu 11.06.2015 o 17:26, Krzysztof Kozlowski pisze:
>> Add proper gate clock for the Analog to Digital Converter (ADC) on
>> Exynos4x12.
>>
>> Signed-off-by: Krzysztof Kozlowski
>> ---
>> drivers/clk/samsung/clk-e
Hello Heiko,
On 06/11/2015 01:50 PM, Heiko Stübner wrote:
> Am Dienstag, 9. Juni 2015, 13:04:41 schrieb Javier Martinez Canillas:
>> Hello,
>>
>> This is a v7 of a series that adds support for multiple EC in a system
>> and also for the protocol version 3 that is used on newer ECs.
>>
>> Most pa
Usage of labels instead of full paths reduces possible mistakes when
overriding nodes.
Signed-off-by: Krzysztof Kozlowski
---
This one was missed during last label refactor. Rebased on Kukjin's
for-next.
Tested by comparison of DTB and decompiled DTS.
---
arch/arm/boot/dts/exynos4210-universa
Am Dienstag, 9. Juni 2015, 13:04:41 schrieb Javier Martinez Canillas:
> Hello,
>
> This is a v7 of a series that adds support for multiple EC in a system
> and also for the protocol version 3 that is used on newer ECs.
>
> Most patches were taken from the downstream ChromiumOS v3.14 tree with
> f
Am 11.06.2015 um 13:24 schrieb Alexander Holler:
> Am 11.06.2015 um 12:17 schrieb Alexander Holler:
>> Am 11.06.2015 um 10:12 schrieb Linus Walleij:
>>> On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler
>>> wrote:
Am 10.06.2015 um 09:30 schrieb Linus Walleij:
>>>
> i2c host comes out, pr
Am 11.06.2015 um 12:17 schrieb Alexander Holler:
Am 11.06.2015 um 10:12 schrieb Linus Walleij:
On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler
wrote:
Am 10.06.2015 um 09:30 schrieb Linus Walleij:
i2c host comes out, probes the regulator driver, regulator driver
probes and then the regula
W dniu 11.06.2015 o 17:26, Krzysztof Kozlowski pisze:
> Add proper gate clock for the Analog to Digital Converter (ADC) on
> Exynos4x12.
>
> Signed-off-by: Krzysztof Kozlowski
> ---
> drivers/clk/samsung/clk-exynos4.c | 3 +++
> include/dt-bindings/clock/exynos4.h | 5 -
> 2 files changed,
Am 11.06.2015 um 10:12 schrieb Linus Walleij:
On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler wrote:
Am 10.06.2015 um 09:30 schrieb Linus Walleij:
i2c host comes out, probes the regulator driver, regulator driver
probes and then the regulator_get() call returns.
This requires instrumenta
The TSADC gate clock is present only in Exynos4210. It should not be
added to exynos4x12.dtsi because the register controlling it is reserved
on Exynos4x12.
Instead, the Analog to Digital Converter of Exynos4x12 uses PCLK_ADC
gate clock from different register.
By using proper clock this effectiv
Add proper gate clock for the Analog to Digital Converter (ADC) on
Exynos4x12.
Signed-off-by: Krzysztof Kozlowski
---
drivers/clk/samsung/clk-exynos4.c | 3 +++
include/dt-bindings/clock/exynos4.h | 5 -
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/samsung/clk-
On Wed, Jun 10, 2015 at 12:19 PM, Tomeu Vizoso
wrote:
> On 10 June 2015 at 09:30, Linus Walleij wrote:
>> regulator_get(...) -> not available, so:
>> - identify target regulator provider - this will need instrumentation
>> - probe it
>>
>> It then turns out the regulator driver is on the i2c bus
On Wed, Jun 10, 2015 at 10:28 AM, Alexander Holler wrote:
> Am 10.06.2015 um 09:30 schrieb Linus Walleij:
>> i2c host comes out, probes the regulator driver, regulator driver
>> probes and then the regulator_get() call returns.
>>
>> This requires instrumentation on anything providing a resource
On 04/06/15 01:05, Michael Turquette wrote:
> One small thing: clk-next isn't considered stable. I had some stuff in
> there (Stephen's amba assigned-clock-rates patch) which I had to pull
> out (no ACK from maintainer) and it crept back in because this PR was
> based on top of it. No big deal bec
Hello,
On 2015-06-11 09:07, Joonyoung Shim wrote:
With atomic modesetting all the control for CRTC, Planes, Encoders and
Connectors should come from DRM core, so the driver is not allowed to
enable or disable planes from inside the crtc_enable()/disable() call.
But it needs to disable planes wi
With atomic modesetting all the control for CRTC, Planes, Encoders and
Connectors should come from DRM core, so the driver is not allowed to
enable or disable planes from inside the crtc_enable()/disable() call.
But it needs to disable planes with crtc_disable in exynos hw driver
internally. Becau
44 matches
Mail list logo
