Hi,
On Fri, Jul 10, 2015 at 05:14:44PM +0200, Hans de Goede wrote:
Some sdio wifi modules have not been working reliable with the sunxi-mmc
host code. This turns out to be caused by it starting new commands while
the card signals that it is still busy processing a previous command.
This
On Fri, Jul 17, 2015 at 04:39:37PM +0200, LABBE Corentin wrote:
Hello
This is the driver for the Security System included in Allwinner SoC A20.
The Security System (SS for short) is a hardware cryptographic accelerator
that
support AES/MD5/SHA1/DES/3DES/PRNG algorithms.
It could be found
hi,
sorry if i top reply on my own post.. :-)
but i've been just made aware on linux-sunxi IRC channel that the watchdog
oneliner patch has been finally submitted on LKML:
https://marc.info/?l=linux-kernelm=143620559723693w=2
bye
On Wednesday, July 1, 2015 at 11:11:06 AM UTC+2, Andrea
Hi,
Thanks for your patch.
On Sun, Jul 19, 2015 at 03:45:03PM +0200, Josef Gajdusek wrote:
Iteaduino Plus A10 is a breakout board + Itead Core A10.
Is there multiple breakout boards available for that module?
It features 1GB RAM, has most of the A10 pins on a .1 header, 2 USB
ports, 1 OTG
Hi,
On 20-07-15 10:00, Maxime Ripard wrote:
Hi,
On Fri, Jul 10, 2015 at 05:14:44PM +0200, Hans de Goede wrote:
Some sdio wifi modules have not been working reliable with the sunxi-mmc
host code. This turns out to be caused by it starting new commands while
the card signals that it is still
On Fri, Jun 26, 2015 at 11:00:10AM +0200, Roy Spliet wrote:
The TIMING_CFG register was previously statically set to a magic value
(extracted from Allwinner's BSP) when initializing the NAND controller.
Now that we have more details about the TIMING_CFG register layout
(extracted from the A83
Le mercredi 15 juillet 2015 09:18:32 UTC+2, sigint a écrit :
splite07@... writes:
How to disable this behavior ?
Maybe this is a common behavior of battery enabled devices. When You connect
turned off phone to charger, it booted automatically, then show some screen
animation of charging
Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,
has most of the A10 pins on a .1 header, 2 USB ports, 1 OTG USB port,
Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot.
Signed-off-by: Josef Gajdusek a...@atx.name
---
It does not look like there
