[linux-sunxi] Re: BUG: A31s Not booting anymore

2018-02-13 Thread Chen-Yu Tsai 
On Tue, Feb 13, 2018 at 7:32 PM, Philipp Rossak  wrote:
>
>
> On 13.02.2018 03:59, Chen-Yu Tsai wrote:
>>
>> On Tue, Feb 13, 2018 at 9:25 AM, Philipp Rossak  wrote:
>>>
>>>
>>>
>>> On 12.02.2018 19:21, Philipp Rossak wrote:


 Hey,

 When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
 kernel ... . After enabling the earlyprintk I could capture this log:
 [1].

 After reverting those 5 commits from Chen-Yu I was able to boot again:


 clk: sunxi-ng: Support fixed post-dividers on NM style clocks
 7d333ef1cc1b8c8951f3a2c41f6406e2295d8be9

 clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
 10e6eb4f2c5b35ae71c9bc0db83d74238719b453

 clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
 e952ca3c6b2ffdfbf9618e4bd3e9aad1ff3f5eb4

 clk: sunxi-ng: Support fixed post-dividers on MP style clocks
 946797aa3f08e2f6f5992f3ec2be44791e9b9260

 clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module
 clocks
 83fe3be4d1974f5f50c5e2039a1609f4960e8579


 I allready tried to fix it with making them save against zero:

 if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV && \
   cmp->fixed_post_div with)
  rate *= cmp->fixed_post_div;

 But that didn't help.

 Any ideas?

 Regards,
 Philipp

 [1]: https://pastebin.com/64Fzzqvg
>>>
>>>
>>>
>>> It took me some time, but I have now a few more infos:
>>>
>>> Right now the code breaks at this point here [1], with this clock [2].
>>> If we have a look now at the clock config [3], we see here a table which
>>> is
>>> an u8 array and also a fixed_predivs struct.
>>
>>
>> The u8 array is for mapping the parents from the index in the parents
>> array to the actual register value you listed below.
>>
>> How are you figuring out which clock is triggering this? Because that
>> is not even the right type of clock. The backtrace you posted shows
>> the error occurring in a DIV or M type clock, not the MP type you
>> are pointing to.
>>
>> Could you add some noisy printk calls to the sunxi_ccu_probe()
>> function in drivers/clk/sunxi-ng/ccu_common.c so it's much clearer
>> which clock is failing?
>
>
> Thats what I basically did to find out which clock is failing. This here are
> the changes I'm doing [1]  and thats the dirty log [2]. It fails at clock NR
> 155 which is this one [3] mentioned before.
>
>>
>>
>>>
>>> If we have a look at the function call where it breaks [4], shouldn't the
>>> table be a clk_div_table struct instead of an u8?
>>
>>
>> The table argument is an option. Did you go through how the sunxi-ng
>> driver
>> calls this function? As mentioned above, you are looking at the wrong
>> thing.
>>
>> Thanks
>> ChenYu
>
>
> I followed the failing call to this function (through the clock driver). As
> you can see I added an additional printk statement to see where it fails.

I found the problem... wrong ops for the clock type. Likely a copy-paste
error on my part. I'll send a patch later.

Sorry for being so harsh on you.

ChenYu

> Regards,
> Philipp
>
>>
>>>
>>> The a31s is the only board where we have this combination of a
>>> fixed_predivs
>>> and a table.
>>>
>>> Philipp
>>>
>>>
>>> Related Clock source register A31s:
>>>
>>> : OSC24MHz/750=32KHz
>>> 0001: LOSC
>>> 0010: OSC24MHz
>>> 0011: /
>>> 0100: /
>>> 0101: /
>>> 0110: /
>>> 0111: /
>>> 1000: /
>>> 1001: /
>>> 1010: /
>>> 1011: AXICLK/4
>>> 1100: /
>>> 1101: AHB1CLK/4
>>> 1110: /
>>> : /
>>>
>>>
>>> [1]:
>>>
>>> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L89
>>>
>>> [2]:
>>>
>>> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L1137
>>>
>>> [3]:
>>>
>>> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L749
>>>
>>> [4]:
>>>
>>> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L93
>>>
>
> [1]: https://pastebin.com/tvDunAWq
> [2]: https://pastebin.com/SBn2VQLu
> [3]:
> http://lxr.bootlin.com/linux/v4.16-rc1/source/include/dt-bindings/clock/sun6i-a31-ccu.h#L187

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[linux-sunxi] Re: BUG: A31s Not booting anymore

2018-02-13 Thread Philipp Rossak 



On 13.02.2018 03:59, Chen-Yu Tsai wrote:

On Tue, Feb 13, 2018 at 9:25 AM, Philipp Rossak  wrote:



On 12.02.2018 19:21, Philipp Rossak wrote:


Hey,

When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
kernel ... . After enabling the earlyprintk I could capture this log: [1].

After reverting those 5 commits from Chen-Yu I was able to boot again:


clk: sunxi-ng: Support fixed post-dividers on NM style clocks
7d333ef1cc1b8c8951f3a2c41f6406e2295d8be9

clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
10e6eb4f2c5b35ae71c9bc0db83d74238719b453

clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
e952ca3c6b2ffdfbf9618e4bd3e9aad1ff3f5eb4

clk: sunxi-ng: Support fixed post-dividers on MP style clocks
946797aa3f08e2f6f5992f3ec2be44791e9b9260

clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
83fe3be4d1974f5f50c5e2039a1609f4960e8579


I allready tried to fix it with making them save against zero:

if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV && \
  cmp->fixed_post_div with)
 rate *= cmp->fixed_post_div;

But that didn't help.

Any ideas?

Regards,
Philipp

[1]: https://pastebin.com/64Fzzqvg



It took me some time, but I have now a few more infos:

Right now the code breaks at this point here [1], with this clock [2].
If we have a look now at the clock config [3], we see here a table which is
an u8 array and also a fixed_predivs struct.


The u8 array is for mapping the parents from the index in the parents
array to the actual register value you listed below.

How are you figuring out which clock is triggering this? Because that
is not even the right type of clock. The backtrace you posted shows
the error occurring in a DIV or M type clock, not the MP type you
are pointing to.

Could you add some noisy printk calls to the sunxi_ccu_probe()
function in drivers/clk/sunxi-ng/ccu_common.c so it's much clearer
which clock is failing?


Thats what I basically did to find out which clock is failing. This here 
are the changes I'm doing [1]  and thats the dirty log [2]. It fails at 
clock NR 155 which is this one [3] mentioned before.







If we have a look at the function call where it breaks [4], shouldn't the
table be a clk_div_table struct instead of an u8?


The table argument is an option. Did you go through how the sunxi-ng driver
calls this function? As mentioned above, you are looking at the wrong thing.

Thanks
ChenYu


I followed the failing call to this function (through the clock driver). 
As you can see I added an additional printk statement to see where it fails.


Regards,
Philipp




The a31s is the only board where we have this combination of a fixed_predivs
and a table.

Philipp


Related Clock source register A31s:

: OSC24MHz/750=32KHz
0001: LOSC
0010: OSC24MHz
0011: /
0100: /
0101: /
0110: /
0111: /
1000: /
1001: /
1010: /
1011: AXICLK/4
1100: /
1101: AHB1CLK/4
1110: /
: /


[1]:
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L89

[2]:
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L1137

[3]:
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L749

[4]:
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L93



[1]: https://pastebin.com/tvDunAWq
[2]: https://pastebin.com/SBn2VQLu
[3]: 
http://lxr.bootlin.com/linux/v4.16-rc1/source/include/dt-bindings/clock/sun6i-a31-ccu.h#L187


--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[linux-sunxi] Re: BUG: A31s Not booting anymore

2018-02-12 Thread Chen-Yu Tsai 
On Tue, Feb 13, 2018 at 9:25 AM, Philipp Rossak  wrote:
>
>
> On 12.02.2018 19:21, Philipp Rossak wrote:
>>
>> Hey,
>>
>> When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting
>> kernel ... . After enabling the earlyprintk I could capture this log: [1].
>>
>> After reverting those 5 commits from Chen-Yu I was able to boot again:
>>
>>
>> clk: sunxi-ng: Support fixed post-dividers on NM style clocks
>> 7d333ef1cc1b8c8951f3a2c41f6406e2295d8be9
>>
>> clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
>> 10e6eb4f2c5b35ae71c9bc0db83d74238719b453
>>
>> clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
>> e952ca3c6b2ffdfbf9618e4bd3e9aad1ff3f5eb4
>>
>> clk: sunxi-ng: Support fixed post-dividers on MP style clocks
>> 946797aa3f08e2f6f5992f3ec2be44791e9b9260
>>
>> clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
>> 83fe3be4d1974f5f50c5e2039a1609f4960e8579
>>
>>
>> I allready tried to fix it with making them save against zero:
>>
>> if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV && \
>>  cmp->fixed_post_div with)
>> rate *= cmp->fixed_post_div;
>>
>> But that didn't help.
>>
>> Any ideas?
>>
>> Regards,
>> Philipp
>>
>> [1]: https://pastebin.com/64Fzzqvg
>
>
> It took me some time, but I have now a few more infos:
>
> Right now the code breaks at this point here [1], with this clock [2].
> If we have a look now at the clock config [3], we see here a table which is
> an u8 array and also a fixed_predivs struct.

The u8 array is for mapping the parents from the index in the parents
array to the actual register value you listed below.

How are you figuring out which clock is triggering this? Because that
is not even the right type of clock. The backtrace you posted shows
the error occurring in a DIV or M type clock, not the MP type you
are pointing to.

Could you add some noisy printk calls to the sunxi_ccu_probe()
function in drivers/clk/sunxi-ng/ccu_common.c so it's much clearer
which clock is failing?


>
> If we have a look at the function call where it breaks [4], shouldn't the
> table be a clk_div_table struct instead of an u8?

The table argument is an option. Did you go through how the sunxi-ng driver
calls this function? As mentioned above, you are looking at the wrong thing.

Thanks
ChenYu

>
> The a31s is the only board where we have this combination of a fixed_predivs
> and a table.
>
> Philipp
>
>
> Related Clock source register A31s:
>
> : OSC24MHz/750=32KHz
> 0001: LOSC
> 0010: OSC24MHz
> 0011: /
> 0100: /
> 0101: /
> 0110: /
> 0111: /
> 1000: /
> 1001: /
> 1010: /
> 1011: AXICLK/4
> 1100: /
> 1101: AHB1CLK/4
> 1110: /
> : /
>
>
> [1]:
> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L89
>
> [2]:
> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L1137
>
> [3]:
> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L749
>
> [4]:
> http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L93
>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[linux-sunxi] Re: BUG: A31s Not booting anymore

2018-02-12 Thread Philipp Rossak 



On 12.02.2018 19:21, Philipp Rossak wrote:

Hey,

When I try to boot my A31s (Bananapi M2) u-boot is showing only Starting 
kernel ... . After enabling the earlyprintk I could capture this log: [1].


After reverting those 5 commits from Chen-Yu I was able to boot again:


clk: sunxi-ng: Support fixed post-dividers on NM style clocks
7d333ef1cc1b8c8951f3a2c41f6406e2295d8be9

clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
10e6eb4f2c5b35ae71c9bc0db83d74238719b453

clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
e952ca3c6b2ffdfbf9618e4bd3e9aad1ff3f5eb4

clk: sunxi-ng: Support fixed post-dividers on MP style clocks
946797aa3f08e2f6f5992f3ec2be44791e9b9260

clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
83fe3be4d1974f5f50c5e2039a1609f4960e8579


I allready tried to fix it with making them save against zero:

if (cmp->common.features & CCU_FEATURE_FIXED_POSTDIV && \
     cmp->fixed_post_div with)
    rate *= cmp->fixed_post_div;

But that didn't help.

Any ideas?

Regards,
Philipp

[1]: https://pastebin.com/64Fzzqvg


It took me some time, but I have now a few more infos:

Right now the code breaks at this point here [1], with this clock [2].
If we have a look now at the clock config [3], we see here a table which 
is an u8 array and also a fixed_predivs struct.


If we have a look at the function call where it breaks [4], shouldn't 
the table be a clk_div_table struct instead of an u8?


The a31s is the only board where we have this combination of a 
fixed_predivs and a table.


Philipp


Related Clock source register A31s:

: OSC24MHz/750=32KHz
0001: LOSC
0010: OSC24MHz
0011: /
0100: /
0101: /
0110: /
0111: /
1000: /
1001: /
1010: /
1011: AXICLK/4
1100: /
1101: AHB1CLK/4
1110: /
: /


[1]: 
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L89


[2]: 
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L1137


[3]: 
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/sunxi-ng/ccu-sun6i-a31.c#L749


[4]: 
http://lxr.bootlin.com/linux/v4.16-rc1/source/drivers/clk/clk-divider.c#L93


--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.