[linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

在 2017-11-08 18:56，Maxime Ripard 写道： Hi, On Tue, Nov 07, 2017 at 05:38:55PM +0100, Giulio Benetti wrote: Board could be any with A20, for example Olinuxino A20. Or our Q027, S027 boards, but final dts still are not complete. Therefore no upstream boards are using it right now, so we'll merge

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Hi Giulio, If the board is available to buy, for general public use, then I think YES it should go in as a separate DTS ;-). Cheers! On 7 November 2017 at 13:19, Giulio Benetti wrote: > As publicly available what do you mean? > Need schematics and gerbers? >

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

I'd say no, do not merge if hardware is not publicly available, make a separate DTS in your separate Tree that extends the board you are closest to with your custom changes. Cheers! On 7 November 2017 at 13:13, Giulio Benetti wrote: > It's a custom board of my

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Hi Giulio, Sounds good to me. I guess you are developing using the Olimex Lime board, in which case the DTS patch is useless to anyone else? Cheers! On 7 November 2017 at 13:27, Giulio Benetti wrote: > Sure, > > that is the idea. > Here is one of the boards:

[linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Hi, On Tue, Nov 07, 2017 at 05:38:55PM +0100, Giulio Benetti wrote: > Board could be any with A20, > for example Olinuxino A20. > Or our Q027, S027 boards, but final dts still are not complete. Therefore no upstream boards are using it right now, so we'll merge it when that will be the case.

[linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Board could be any with A20, for example Olinuxino A20. Or our Q027, S027 boards, but final dts still are not complete. -- Giulio Benetti R Manager & Advanced Research MICRONOVA SRL Sede: Via A. Niedda 3 - 35010 Vigonza (PD) Tel. 049/8931563 - Fax 049/8931346 Cod.Fiscale - P.IVA 02663420285

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

If someone connects RGB888 to any Olinuxino with A20(any other A20 with parallel LCD), this gives the possibility to setup LCD0 pins. -- Giulio Benetti R Manager & Advanced Research MICRONOVA SRL Sede: Via A. Niedda 3 - 35010 Vigonza (PD) Tel. 049/8931563 - Fax 049/8931346 Cod.Fiscale - P.IVA

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

Sure, that is the idea. Here is one of the boards: http://www.micronovasrl.com/en/q027/ We still don't have an e-commerce on website, but you can write us an e-mail and we can sell it to everybody. So when I will be ready with full DTS of that board, I will submit a patchset including

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

As publicly available what do you mean? Need schematics and gerbers? Or that is possible to buy it online? -- Giulio Benetti R Manager & Advanced Research MICRONOVA SRL Sede: Via A. Niedda 3 - 35010 Vigonza (PD) Tel. 049/8931563 - Fax 049/8931346 Cod.Fiscale - P.IVA 02663420285 Capitale Sociale

[linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

It's a custom board of my Company. Its complete dts is not ready, but that part works. Do I have to submit this when I will submit entire board dts? If yes, since our board has software open source, but not opensource hardware, will you accept our dts in the future? Thank you Il giorno martedì

[linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio Benetti wrote: > On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888 LCD0 pins. > > Add lcd_rgb888_pins in sun7i-a20.dtsi. > > It can be used on sun7i-a20-olinuxino-lime.dts. > This patch gives possibility to set parallel lcd pins for