Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Chris Obbard]

Hi Giulio,

If the board is available to buy, for general public use, then I think YES
it should go in as a separate DTS ;-).

Cheers!

On 7 November 2017 at 13:19, Giulio Benetti  wrote:

> As publicly available what do you mean?
> Need schematics and gerbers?
> Or that is possible to buy it online?
>
> --
> Giulio Benetti
> R Manager &
> Advanced Research
>
> MICRONOVA SRL
> Sede: Via A. Niedda 3 - 35010 Vigonza
> 
> (PD)
> Tel. 049/8931563 - Fax 049/8931346
> Cod.Fiscale - P.IVA 02663420285
> Capitale Sociale € 26.000 i.v.
> Iscritta al Reg. Imprese di Padova N. 02663420285
> Numero R.E.A. 258642
>
> Il 07/11/2017 14:14, Chris Obbard ha scritto:
>
>> I'd say no, do not merge if hardware is not publicly available, make a
>> separate DTS in your separate Tree that extends the board you are closest
>> to with your custom changes.
>>
>> Cheers!
>>
>> On 7 November 2017 at 13:13, Giulio Benetti <
>> giulio.bene...@micronovasrl.com >
>> wrote:
>>
>> It's a custom board of my Company.
>> Its complete dts is not ready, but that part works.
>> Do I have to submit this when I will submit entire board dts?
>> If yes, since our board has software open source, but not opensource
>> hardware,
>> will you accept our dts in the future?
>>
>> Thank you
>>
>> Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime Ripard ha
>> scritto:
>>
>> On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio Benetti wrote:
>>  > On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888
>> LCD0 pins.
>>  >
>>  > Add lcd_rgb888_pins in sun7i-a20.dtsi.
>>  >
>>  > It can be used on sun7i-a20-olinuxino-lime.dts.
>>  > This patch gives possibility to set parallel lcd pins for
>> RGB888.
>>  > To be used with tcon0 in your .dts
>>
>> My question was on which board do you want to use it right now.
>> If the
>> answer is none, then we won't merge that patch, we have too many
>> pinctrl already to not add the unused ones.
>>
>> Maxime
>>
>> -- Maxime Ripard, Free Electrons
>> Embedded Linux and Kernel engineering
>> http://free-electrons.com
>>
>> -- You received this message because you are subscribed to the
>> Google
>> Groups "linux-sunxi" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to linux-sunxi+unsubscr...@googlegroups.com
>> .
>> For more options, visit https://groups.google.com/d/optout
>> .
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Chris Obbard]

I'd say no, do not merge if hardware is not publicly available, make a
separate DTS in your separate Tree that extends the board you are closest
to with your custom changes.

Cheers!

On 7 November 2017 at 13:13, Giulio Benetti  wrote:

> It's a custom board of my Company.
> Its complete dts is not ready, but that part works.
> Do I have to submit this when I will submit entire board dts?
> If yes, since our board has software open source, but not opensource
> hardware,
> will you accept our dts in the future?
>
> Thank you
>
> Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime Ripard ha scritto:
>>
>> On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio Benetti wrote:
>> > On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888 LCD0 pins.
>> >
>> > Add lcd_rgb888_pins in sun7i-a20.dtsi.
>> >
>> > It can be used on sun7i-a20-olinuxino-lime.dts.
>> > This patch gives possibility to set parallel lcd pins for RGB888.
>> > To be used with tcon0 in your .dts
>>
>> My question was on which board do you want to use it right now. If the
>> answer is none, then we won't merge that patch, we have too many
>> pinctrl already to not add the unused ones.
>>
>> Maxime
>>
>> --
>> Maxime Ripard, Free Electrons
>> Embedded Linux and Kernel engineering
>> http://free-electrons.com
>>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Chris Obbard]

Hi Giulio,

Sounds good to me.  I guess you are developing using the Olimex Lime board,
in which case the DTS patch is useless to anyone else?

Cheers!

On 7 November 2017 at 13:27, Giulio Benetti  wrote:

> Sure,
>
> that is the idea.
> Here is one of the boards:
> http://www.micronovasrl.com/en/q027/
>
> We still don't have an e-commerce on website,
> but you can write us an e-mail and we can sell it to everybody.
>
> So when I will be ready with full DTS of that board,
> I will submit a patchset including rgb888_pins.
>
> Right?
>
> --
> Giulio Benetti
> R Manager &
> Advanced Research
>
> MICRONOVA SRL
> Sede: Via A. Niedda 3 - 35010 Vigonza
> 
> (PD)
> Tel. 049/8931563 - Fax 049/8931346
> Cod.Fiscale - P.IVA 02663420285
> Capitale Sociale € 26.000 i.v.
> Iscritta al Reg. Imprese di Padova N. 02663420285
> Numero R.E.A. 258642
>
> Il 07/11/2017 14:23, Chris Obbard ha scritto:
>
>> Hi Giulio,
>>
>> If the board is available to buy, for general public use, then I think
>> YES it should go in as a separate DTS ;-).
>>
>> Cheers!
>>
>> On 7 November 2017 at 13:19, Giulio Benetti <
>> giulio.bene...@micronovasrl.com >
>> wrote:
>>
>> As publicly available what do you mean?
>> Need schematics and gerbers?
>> Or that is possible to buy it online?
>>
>> -- Giulio Benetti
>> R Manager &
>> Advanced Research
>>
>> MICRONOVA SRL
>> Sede: Via A. Niedda 3 - 35010 Vigonza
>> > entry=gmail=g>
>> (PD)
>> Tel. 049/8931563 - Fax 049/8931346
>> Cod.Fiscale - P.IVA 02663420285
>> Capitale Sociale € 26.000 i.v.
>> Iscritta al Reg. Imprese di Padova N. 02663420285
>> Numero R.E.A. 258642
>>
>> Il 07/11/2017 14:14, Chris Obbard ha scritto:
>>
>> I'd say no, do not merge if hardware is not publicly available,
>> make a separate DTS in your separate Tree that extends the board
>> you are closest to with your custom changes.
>>
>> Cheers!
>>
>> On 7 November 2017 at 13:13, Giulio Benetti
>> > 
>> >
>> >> wrote:
>>
>>  It's a custom board of my Company.
>>  Its complete dts is not ready, but that part works.
>>  Do I have to submit this when I will submit entire board dts?
>>  If yes, since our board has software open source, but not
>> opensource
>>  hardware,
>>  will you accept our dts in the future?
>>
>>  Thank you
>>
>>  Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime
>> Ripard ha
>>  scritto:
>>
>>  On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio
>> Benetti wrote:
>>   > On sun7i-a20-* there's no way to enable PA00--PA27
>> as RGB888
>>  LCD0 pins.
>>   >
>>   > Add lcd_rgb888_pins in sun7i-a20.dtsi.
>>   >
>>   > It can be used on sun7i-a20-olinuxino-lime.dts.
>>   > This patch gives possibility to set parallel lcd
>> pins for
>>  RGB888.
>>   > To be used with tcon0 in your .dts
>>
>>  My question was on which board do you want to use it
>> right now.
>>  If the
>>  answer is none, then we won't merge that patch, we have
>> too many
>>  pinctrl already to not add the unused ones.
>>
>>  Maxime
>>
>>  -- Maxime Ripard, Free Electrons
>>  Embedded Linux and Kernel engineering
>> http://free-electrons.com
>>
>>  -- You received this message because you are subscribed
>> to the Google
>>  Groups "linux-sunxi" group.
>>  To unsubscribe from this group and stop receiving emails
>> from it,
>>  send an email to linux-sunxi+unsubscr...@googlegroups.com
>> 
>>  > >.
>>  For more options, visit https://groups.google.com/d/optout
>> 
>>  > >.
>>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, 

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Giulio Benetti]

If someone connects RGB888 to any Olinuxino with A20(any other A20 with 
parallel LCD),

this gives the possibility to setup LCD0 pins.

--
Giulio Benetti
R Manager &
Advanced Research

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 07/11/2017 14:34, Chris Obbard ha scritto:

Hi Giulio,

Sounds good to me.  I guess you are developing using the Olimex Lime 
board, in which case the DTS patch is useless to anyone else?


Cheers!

On 7 November 2017 at 13:27, Giulio Benetti 
> wrote:


Sure,

that is the idea.
Here is one of the boards:
http://www.micronovasrl.com/en/q027/


We still don't have an e-commerce on website,
but you can write us an e-mail and we can sell it to everybody.

So when I will be ready with full DTS of that board,
I will submit a patchset including rgb888_pins.

Right?

-- 
Giulio Benetti

R Manager &
Advanced Research

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza


(PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 07/11/2017 14:23, Chris Obbard ha scritto:

Hi Giulio,

If the board is available to buy, for general public use, then I
think YES it should go in as a separate DTS ;-).

Cheers!

On 7 November 2017 at 13:19, Giulio Benetti

>> wrote:

     As publicly available what do you mean?
     Need schematics and gerbers?
     Or that is possible to buy it online?

     --     Giulio Benetti
     R Manager &
     Advanced Research

     MICRONOVA SRL
     Sede: Via A. Niedda 3 - 35010 Vigonza

>
     (PD)
     Tel. 049/8931563 - Fax 049/8931346
     Cod.Fiscale - P.IVA 02663420285
     Capitale Sociale € 26.000 i.v.
     Iscritta al Reg. Imprese di Padova N. 02663420285
     Numero R.E.A. 258642

     Il 07/11/2017 14:14, Chris Obbard ha scritto:

         I'd say no, do not merge if hardware is not publicly
available,
         make a separate DTS in your separate Tree that extends
the board
         you are closest to with your custom changes.

         Cheers!

         On 7 November 2017 at 13:13, Giulio Benetti
         
         >
         

          On sun7i-a20-* there's no way to enable
PA00--PA27
         as RGB888
                  LCD0 pins.
                   >
                   > Add lcd_rgb888_pins in sun7i-a20.dtsi.
                   >
                   > It can be used on sun7i-a20-olinuxino-lime.dts.
                   > This patch gives possibility to set
parallel lcd
         pins for
                  RGB888.
                   > To be used with tcon0 in your .dts

                  My question was on which board do you want to
use it
         right now.
                  If the
 

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Giulio Benetti]

Sure,

that is the idea.
Here is one of the boards:
http://www.micronovasrl.com/en/q027/

We still don't have an e-commerce on website,
but you can write us an e-mail and we can sell it to everybody.

So when I will be ready with full DTS of that board,
I will submit a patchset including rgb888_pins.

Right?

--
Giulio Benetti
R Manager &
Advanced Research

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 07/11/2017 14:23, Chris Obbard ha scritto:

Hi Giulio,

If the board is available to buy, for general public use, then I think 
YES it should go in as a separate DTS ;-).


Cheers!

On 7 November 2017 at 13:19, Giulio Benetti 
> wrote:


As publicly available what do you mean?
Need schematics and gerbers?
Or that is possible to buy it online?

-- 
Giulio Benetti

R Manager &
Advanced Research

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza


(PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 07/11/2017 14:14, Chris Obbard ha scritto:

I'd say no, do not merge if hardware is not publicly available,
make a separate DTS in your separate Tree that extends the board
you are closest to with your custom changes.

Cheers!

On 7 November 2017 at 13:13, Giulio Benetti

>> wrote:

     It's a custom board of my Company.
     Its complete dts is not ready, but that part works.
     Do I have to submit this when I will submit entire board dts?
     If yes, since our board has software open source, but not
opensource
     hardware,
     will you accept our dts in the future?

     Thank you

     Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime
Ripard ha
     scritto:

         On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio
Benetti wrote:
          > On sun7i-a20-* there's no way to enable PA00--PA27
as RGB888
         LCD0 pins.
          >
          > Add lcd_rgb888_pins in sun7i-a20.dtsi.
          >
          > It can be used on sun7i-a20-olinuxino-lime.dts.
          > This patch gives possibility to set parallel lcd
pins for
         RGB888.
          > To be used with tcon0 in your .dts

         My question was on which board do you want to use it
right now.
         If the
         answer is none, then we won't merge that patch, we have
too many
         pinctrl already to not add the unused ones.

         Maxime

         --         Maxime Ripard, Free Electrons
         Embedded Linux and Kernel engineering
http://free-electrons.com

     --     You received this message because you are subscribed
to the Google
     Groups "linux-sunxi" group.
     To unsubscribe from this group and stop receiving emails
from it,
     send an email to linux-sunxi+unsubscr...@googlegroups.com

     >.
     For more options, visit https://groups.google.com/d/optout

     >.





--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [linux-sunxi] Re: [PATCH 1/1] add rgb888 pins to a20 to enable parallel rgb LCD

[Giulio Benetti]

As publicly available what do you mean?
Need schematics and gerbers?
Or that is possible to buy it online?

--
Giulio Benetti
R Manager &
Advanced Research

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

Il 07/11/2017 14:14, Chris Obbard ha scritto:
I'd say no, do not merge if hardware is not publicly available, make a 
separate DTS in your separate Tree that extends the board you are 
closest to with your custom changes.


Cheers!

On 7 November 2017 at 13:13, Giulio Benetti 
> wrote:


It's a custom board of my Company.
Its complete dts is not ready, but that part works.
Do I have to submit this when I will submit entire board dts?
If yes, since our board has software open source, but not opensource
hardware,
will you accept our dts in the future?

Thank you

Il giorno martedì 7 novembre 2017 14:03:51 UTC+1, Maxime Ripard ha
scritto:

On Tue, Nov 07, 2017 at 01:49:59PM +0100, Giulio Benetti wrote:
 > On sun7i-a20-* there's no way to enable PA00--PA27 as RGB888
LCD0 pins.
 >
 > Add lcd_rgb888_pins in sun7i-a20.dtsi.
 >
 > It can be used on sun7i-a20-olinuxino-lime.dts.
 > This patch gives possibility to set parallel lcd pins for
RGB888.
 > To be used with tcon0 in your .dts

My question was on which board do you want to use it right now.
If the
answer is none, then we won't merge that patch, we have too many
pinctrl already to not add the unused ones.

Maxime

-- 
Maxime Ripard, Free Electrons

Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
You received this message because you are subscribed to the Google

Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to linux-sunxi+unsubscr...@googlegroups.com
.
For more options, visit https://groups.google.com/d/optout
.




--
You received this message because you are subscribed to the Google Groups 
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.