This patch series enable the usb gadget support on at91sam9n12ek
board. On at91sam9n12 SoC which integrate the full speed udc device.
Bo Shen (3):
USB: gadget: at91_udc: add at91sam9n12 support
ARM: at91: dt: at91sam9n12: add udp device node
ARM: at91: dt: at91sam9n12ek: enable udp
Enable usb device port on at91sam9n12ek board.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/boot/dts/at91sam9n12ek.dts | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
b/arch/arm/boot/dts/at91sam9n12ek.dts
index 13bb24e..3e572e5 100644
Add usb device node for at91sam9n12.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/boot/dts/at91sam9n12.dtsi | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
b/arch/arm/boot/dts/at91sam9n12.dtsi
index 68eb9ad..6120e03 100644
---
Add at91sam9n12 SoC support.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/usb/gadget/udc/at91_udc.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c
b/drivers/usb/gadget/udc/at91_udc.c
index c862656..f4c785f 100644
---
Hi Nicholas,
Thank you for the patch.
On Friday 06 February 2015 05:08:53 Nicholas Mc Guire wrote:
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).
Signed-off-by: Nicholas Mc Guire hof...@osadl.org
Acked-by:
On Sun, Feb 08, 2015 at 09:04:32PM +0200, Ruslan Bilovol wrote:
Hi Alan,
On Thu, Jan 29, 2015 at 5:56 PM, Alan Stern st...@rowland.harvard.edu wrote:
On Thu, 29 Jan 2015, Ruslan Bilovol wrote:
Change behavior during registration of gadgets and
gadget drivers in udc-core. Instead of
Hello Bo,
On Mon, Feb 09, 2015 at 05:02:52PM +0800, Bo Shen wrote:
Enable usb device port on at91sam9n12ek board.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/boot/dts/at91sam9n12ek.dts | 5 +
1 file changed, 5 insertions(+)
diff --git
On Mon, 9 Feb 2015, Oliver Neukum wrote:
This is necessary to make some storage arrays work.
Some storage devices have more than 8 LUNs. In addition
you can hook up a WideSCSI bus to USB. In these cases even
level 2 devices can have more than 8 devices. For them
it is necessary to simply
Hello guys.
Now that 3.19 is out there - I would like to know if I can domething more to
help improve the situation regarding this bug - send some more info. I might
eventually try to debug the problem differently but I will need some more spare
time to do so.
Thank you for all the help and
On Mon, 2015-02-09 at 11:10 -0500, Alan Stern wrote:
On Mon, 9 Feb 2015, Oliver Neukum wrote:
This is necessary to make some storage arrays work.
Some storage devices have more than 8 LUNs. In addition
you can hook up a WideSCSI bus to USB. In these cases even
level 2 devices can
On 9 February 2015 at 22:26, zhangfei zhangfei@linaro.org wrote:
On 02/09/2015 10:11 AM, Peter Chen wrote:
+static void hi6220_detect_work(struct work_struct *work)
+{
+ struct hi6220_priv *priv =
+ container_of(work, struct hi6220_priv, work.work);
+ int
Hello,
Johan Hovold 於 2015/2/9 下午 04:42 寫道:
The value you should be returning is
jiffies_to_msecs(port-port.closing_wait) / 10, unless the value is
ASYNC_CLOSING_WAIT_NONE in which case you simply return that, and
similarly for close_delay.
I'll try to fix it, or reuse default value next
On Tue, 10 Feb 2015, Huang Rui wrote:
On Mon, Feb 09, 2015 at 10:59:42AM -0500, Alan Stern wrote:
On Mon, 9 Feb 2015, Huang Rui wrote:
Hi,
Do you have any trick to downgrade one USB3 capacity device from super
speed mode to high speed mode on xhci port via host side?
=f0bceab4e3b528e799aba8fda8d2936fcfd41f1f
Thanks for you information. Missing this patch, check the next-20150209,
it is here. I will base on next-20150209, so this patch no need anymore,
only need to change the dts(i) file now.
Thanks again.
u32 txvc = at91_udp_read(udc
Add usb device node for at91sam9n12.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
Changes in v2: None
arch/arm/boot/dts/at91sam9n12.dtsi | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi
b/arch/arm/boot/dts/at91sam9n12.dtsi
index
Enable usb device port on at91sam9n12ek board.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
Changes in v2:
- Add pinctrl for usb1 vbus sense.
arch/arm/boot/dts/at91sam9n12ek.dts | 14 ++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts
This patch series enable usb device support on at91sam9n12ek board.
Changes in v2:
- Base on next-20150209 (so, remove the modification of udc driver).
- Add pinctrl for usb1 vbus sense.
Bo Shen (2):
ARM: at91: dt: at91sam9n12: add udp device node
ARM: at91: dt: at91sam9n12ek: enable udp
Hi Simon-san,
On Mon, Feb 09, 2015 at 08:41:18AM +, yoshihiro shimoda wrote:
Subject: [PATCH 0/2] ARM: shmobile: r8a7790: add for USB-DMAC
Oops, I mistook this subject of cover-letter.
However, actual patches are correct.
Thanks,
I think it would be best if you resubmitted
On Mon, 9 Feb 2015, Huang Rui wrote:
Hi,
Do you have any trick to downgrade one USB3 capacity device from super
speed mode to high speed mode on xhci port via host side?
Connect it to the host by a USB-2 cable.
Alan Stern
--
To unsubscribe from this list: send the line unsubscribe
On Sun, 8 Feb 2015, Ruslan Bilovol wrote:
Hi Alan,
On Thu, Jan 29, 2015 at 5:56 PM, Alan Stern st...@rowland.harvard.edu wrote:
On Thu, 29 Jan 2015, Ruslan Bilovol wrote:
Change behavior during registration of gadgets and
gadget drivers in udc-core. Instead of previous
approach when
Hi,
On Sun, Feb 08, 2015 at 02:51:16PM -0700, Joseph Kogut wrote:
I have an Intel Valleyview/Baytrail based device (specifically a Dell
Venue 8 Pro 5830) that I'd like to be able to use the Linux Gadget
subsystem on, but it seems that the controller isn't currently
supported. I'm running the
On Mon, Feb 9, 2015 at 12:39 PM, Tony Lindgren t...@atomide.com wrote:
* Bin Liu binml...@gmail.com [150206 10:21]:
Tony,
On Fri, Feb 6, 2015 at 11:23 AM, Tony Lindgren t...@atomide.com wrote:
* George Cherian george.cher...@ti.com [150206 05:05]:
Hi Tony,
You also need to add similar
On Mon, 9 Feb 2015, Oliver Neukum wrote:
On Mon, 2015-02-09 at 11:10 -0500, Alan Stern wrote:
On Mon, 9 Feb 2015, Oliver Neukum wrote:
This is necessary to make some storage arrays work.
Some storage devices have more than 8 LUNs. In addition
you can hook up a WideSCSI bus to
On Mon, 9 Feb 2015, Krzysztof Opasiak wrote:
Why bother matching by name? Why not simply take the first
available
UDC?
Because you may have more than one udc. This would allow to pick one by
name just like using configfs interface.
Clearly it would be more flexible to allow the user
From: Li Jun b47...@freescale.com
Since BSV irq is enabled for B-device all the time, so B_SESS_VLD timer
is not required, and also no need to check BSV status when B_ASE0_BRST
timer timeout.
Signed-off-by: Li Jun jun...@freescale.com
---
drivers/usb/chipidea/otg_fsm.c | 31
From: Li Jun b47...@freescale.com
Current otg fsm timers are using controller 1ms irq and count it, this patch
is to replace it with hrtimer solution, use one hrtimer for all otg timers.
Signed-off-by: Li Jun jun...@freescale.com
---
drivers/usb/chipidea/ci.h | 10 +-
From: Li Jun b47...@freescale.com
B_DATA_PLS(data-line pulse time) and B_SSEND_SRP(session end to SRP init) are
also from OTGEH 2.0 Specification and they are not chipidea specific.
Signed-off-by: Li Jun jun...@freescale.com
---
drivers/usb/chipidea/otg_fsm.c |8
From: Li Jun b47...@freescale.com
This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after suspended, here
enable wakeup by connection before suspend to make it can be resumed by DP;
and handle wakeup from that state like
This patch set is based on Felipe's usb.git / testing/next branch.
(commit id = 6461d69d12508fe166be5c6c31d5a9da02a4dfb5)
To use the USB-DMAC, we have to add some device nodes for USB-DMAC
in dts file. If we don't have such device nodes, this driver will
use PIO.
Yoshihiro Shimoda (4):
usb:
This patch fixes the setup sequence in xfer_work(). Otherwise,
sometimes a usb transaction will get stuck.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
drivers/usb/renesas_usbhs/fifo.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git
To connect the channel of USB-DMAC to USBHS DnFIFO number, this patch
adds this channel/FIFO number in dma-names. Otherwise, this driver
needs to add analysis code for device tree.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
.../devicetree/bindings/usb/renesas_usbhs.txt
Some Renesas SoCs have the USB-DMAC. It is able to terminate transfers
when a short packet is received, even if less bytes than the transfer
counter size have been received. Also, it is able to send a short
packet even if the packet size is not multiples of 8bytes.
Since the previous code has
The usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE) in usbhsf_dma_complete()
will call the complete function of a usb gadget driver finally.
According to the gadget.h, The function will always be called with
interrupts disabled.
So, this patch adds a local_irq_save/local_irq_restore in the
This patch set is based on renesas.git / renesas-devel-20150202-v3.19-rc7
tag. (commit id = bcfb200689185c6f7c5357c832d1d8fcea80c80c)
This patch set is related to the usb-dmac driver. Now I submitted
some patches:
http://thread.gmane.org/gmane.linux.drivers.devicetree/109578/
Yoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
arch/arm/boot/dts/r8a7790.dtsi | 22 ++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 24de994..737b578 100644
---
Add DMA properties to the HSUSB node.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
arch/arm/boot/dts/r8a7791.dtsi |3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 9343548..9c6d174 100644
---
This patch set is based on renesas.git / renesas-devel-20150202-v3.19-rc7
tag. (commit id = bcfb200689185c6f7c5357c832d1d8fcea80c80c)
This patch set is related to the usb-dmac driver. Now I submitted
some patches:
http://thread.gmane.org/gmane.linux.drivers.devicetree/109578/
Yoshihiro Shimoda
On Wed, Feb 04, 2015 at 05:04:18AM -0800, Greg Kroah-Hartman wrote:
On Wed, Feb 04, 2015 at 10:35:22AM +0100, Maxime Ripard wrote:
Hi Mathias, Greg,
On Mon, Jan 19, 2015 at 02:01:12PM +0100, Maxime Ripard wrote:
The commit 973747928514 (usb: host: xhci-plat: add support for the Armada
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
arch/arm/boot/dts/r8a7791.dtsi | 22 ++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index afba8af..9343548 100644
---
Add DMA properties to the HSUSB node.
Signed-off-by: Yoshihiro Shimoda yoshihiro.shimoda...@renesas.com
---
arch/arm/boot/dts/r8a7790.dtsi |3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 737b578..8dd62fb 100644
---
On Mon, Feb 09, 2015 at 09:22:50AM +0100, Maxime Ripard wrote:
On Wed, Feb 04, 2015 at 05:04:18AM -0800, Greg Kroah-Hartman wrote:
On Wed, Feb 04, 2015 at 10:35:22AM +0100, Maxime Ripard wrote:
Hi Mathias, Greg,
On Mon, Jan 19, 2015 at 02:01:12PM +0100, Maxime Ripard wrote:
The
On Mon, Feb 09, 2015 at 02:45:30PM +0800, Li Jun wrote:
From: Li Jun b47...@freescale.com
This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after suspended, here
enable wakeup by connection before suspend to make it
Subject: [PATCH 0/2] ARM: shmobile: r8a7790: add for USB-DMAC
Oops, I mistook this subject of cover-letter.
However, actual patches are correct.
Best regards,
Yoshihiro Shimoda
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to
On Mon, Feb 09, 2015 at 02:59:12PM +0800, Peter Hung wrote:
Hello,
Sergei Shtylyov 於 2015/2/6 下午 08:21 寫道:
We extract TIOCGSERIAL section in f81232_ioctl() to
f81232_get_serial_info()
to make it clarify
You're also changing 'ser.baud_rate' from 460800 to 115200. And
explicitly
From: Li Jun b47...@freescale.com
This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after suspended, here
enable wakeup by connection before suspend to make it can be resumed by DP;
and handle wakeup from that state like
Signed-off-by: Zhangfei Gao zhangfei@linaro.org
---
.../devicetree/bindings/usb/hi6220-usb.txt | 49 ++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/hi6220-usb.txt
diff --git
Add usb phy controller for hi6220 platform
Signed-off-by: Zhangfei Gao zhangfei@linaro.org
---
drivers/usb/phy/Kconfig | 9 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-hi6220-usb.c | 308 +++
3 files changed, 318
Since phy is definitely used in usb controller, load the phy
earlier to make boot time shorter.
Signed-off-by: Zhangfei Gao zhangfei@linaro.org
Acked-by: Peter Chen peter.c...@freescale.com
---
drivers/usb/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git
Signed-off-by: Zhangfei Gao zhangfei@linaro.org
---
drivers/usb/dwc2/platform.c | 30 ++
1 file changed, 30 insertions(+)
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index ae095f0..f7c67db 100644
--- a/drivers/usb/dwc2/platform.c
+++
On Mon, Feb 09, 2015 at 09:23:57PM +0800, Li Jun wrote:
From: Li Jun b47...@freescale.com
Hi Peter,
The 2 patches are to fix the problems I found in otg fsm mode.
The 1st patch is to fix one system hang issue in otg fsm mode if runtime PM
is enabled, but can not cover vbus glitch case you
On Mon, Feb 09, 2015 at 09:23:59PM +0800, Li Jun wrote:
From: Li Jun b47...@freescale.com
For A-device, when load gadget driver, we should not run udc either as this
will be controlled by otg fsm.
Signed-off-by: Li Jun jun...@freescale.com
---
drivers/usb/chipidea/udc.c |5 +++--
1
Add necessary dwc2 binding documentation for Hisilicon soc: hi6220
Signed-off-by: Zhangfei Gao zhangfei@linaro.org
---
Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt
v3:
fix typo and add -EPROBE_DEFER of regulator, pointed by Peter
v2:
address comments from Sergei and Peter
add hi6220_phy_setup(false) code
v1:
hi6220 usb controller is inherited from dwc2
add phy accordingly
support otg gadget/host
Zhangfei Gao (5):
Documentation: dt-bindings: add dt
Hi,
(... snip ...)
You don't need all this stuff. What's the point of keeping
track of
names? If there are any unbound gadget drivers pending, a
newly
registered UDC should bind to the first one available.
It's because gadget driver may be bound to usb_gadget in two
ways:
* George Cherian george.cher...@ti.com [150208 22:02]:
Hi Tony,
On 02/06/2015 10:53 PM, Tony Lindgren wrote:
* George Cherian george.cher...@ti.com [150206 05:05]:
Hi Tony,
You also need to add similar things in dsps_musb_reset();
Otherwise you might not recover from a BABBLE condition.
* Bin Liu binml...@gmail.com [150206 10:21]:
Tony,
On Fri, Feb 6, 2015 at 11:23 AM, Tony Lindgren t...@atomide.com wrote:
* George Cherian george.cher...@ti.com [150206 05:05]:
Hi Tony,
You also need to add similar things in dsps_musb_reset();
Otherwise you might not recover from a
-Original Message-
From: linux-usb-ow...@vger.kernel.org [mailto:linux-usb-
ow...@vger.kernel.org] On Behalf Of Krzysztof Opasiak
Sent: Monday, February 09, 2015 7:06 PM
To: 'Alan Stern'; 'Ruslan Bilovol'; 'Peter Chen'
Cc: linux-usb@vger.kernel.org; linux-ker...@vger.kernel.org;
On Mon, Feb 09, 2015 at 10:59:42AM -0500, Alan Stern wrote:
On Mon, 9 Feb 2015, Huang Rui wrote:
Hi,
Do you have any trick to downgrade one USB3 capacity device from super
speed mode to high speed mode on xhci port via host side?
Connect it to the host by a USB-2 cable.
If
On Mon, 9 Feb 2015, Michael Tessier wrote:
Okay; I did my homeworks. We've loaded kernel V3.16 (Oct 14th, 2015)
on an i.MX51 plattform and the problem is still there. Unless an
important change occured in V3.19, it appears that the latest kernel
is not the solution for us. So we're still not
Hi Bo,
On 09/02/2015 at 17:02:50 +0800, Bo Shen wrote :
Add at91sam9n12 SoC support.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
drivers/usb/gadget/udc/at91_udc.c | 9 ++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c
Hi,
Do you have any trick to downgrade one USB3 capacity device from super
speed mode to high speed mode on xhci port via host side?
Thanks,
Rui
--
To unsubscribe from this list: send the line unsubscribe linux-usb in
the body of a message to majord...@vger.kernel.org
More majordomo info at
Hi Sylvain,
On 02/09/2015 06:04 PM, Sylvain Rochet wrote:
Hello Bo,
On Mon, Feb 09, 2015 at 05:02:52PM +0800, Bo Shen wrote:
Enable usb device port on at91sam9n12ek board.
Signed-off-by: Bo Shen voice.s...@atmel.com
---
arch/arm/boot/dts/at91sam9n12ek.dts | 5 +
1 file changed, 5
On Mon, Feb 09, 2015 at 03:22:17PM +0800, Peter Chen wrote:
On Mon, Feb 09, 2015 at 02:45:30PM +0800, Li Jun wrote:
From: Li Jun b47...@freescale.com
This patch adds runtime power management support for otg fsm mode, since
A-device in a_idle state cannot detect data pulse irq after
2015-02-08 12:15 GMT+01:00 Sergei Shtylyov sergei.shtyl...@cogentembedded.com:
Hello.
On 2/8/2015 12:55 AM, Bas Peters wrote:
This patch removes assignment of variables in if conditions,
as specified in CodingStyle.
Signed-off-by: Bas Peters baspeter...@gmail.com
---
On 02/09/2015 10:11 AM, Peter Chen wrote:
+static void hi6220_detect_work(struct work_struct *work)
+{
+ struct hi6220_priv *priv =
+ container_of(work, struct hi6220_priv, work.work);
+ int gpio_id, gpio_vubs;
%s/gpio_vubs/gpio_vbus
Yes, typo
+static void
2015-02-09 3:15 GMT+01:00 Peter Chen peter.c...@freescale.com:
On Sat, Feb 07, 2015 at 10:55:01PM +0100, Bas Peters wrote:
This patch removes assignment of variables in if conditions in
accordance witht the CodingStyle.
%s/witht/with
Typo, my bad. Should I fix the commit message and resend?
Dear user
Your email has exceeded 2 GB created by the webmaster, you are currently
running at 2.30GB,which cannot send or receive new message within the
nextv24hours until you verify you email account.
Please enter y verify your account :
(1) E-mail:
(2) Name:
(3) Password:
(4) Confirm
On 25/11/14 16:49, Kevin Cernekee wrote:
On chips strapped for BE, we'll need to use ioread32be/iowrite32be instead of
ioread32/iowrite32.
Has of_device_is_big_endian() been merged in a tree now, I am not seeing
it in Linus' tree, but have not look at Grant's tree yet. Thanks
Signed-off-by:
This is necessary to make some storage arrays work.
Some storage devices have more than 8 LUNs. In addition
you can hook up a WideSCSI bus to USB. In these cases even
level 2 devices can have more than 8 devices. For them
it is necessary to simply believe the class specific
command and report its
Hi guys,
On Mon, Feb 9, 2015 at 10:00 PM, Alan Stern st...@rowland.harvard.edu wrote:
On Mon, 9 Feb 2015, Krzysztof Opasiak wrote:
Why bother matching by name? Why not simply take the first
available
UDC?
Because you may have more than one udc. This would allow to pick one by
name
On Mon, Feb 09, 2015 at 08:41:18AM +, yoshihiro shimoda wrote:
Subject: [PATCH 0/2] ARM: shmobile: r8a7790: add for USB-DMAC
Oops, I mistook this subject of cover-letter.
However, actual patches are correct.
Thanks,
I think it would be best if you resubmitted this series, which is for
That is interresting, however, I have an older kernel running
an OHCI driver which is able to handle 4 codecs. Same usb
hardware (codecs and hub), but older kernel on a different
CPU, with much less power. This makes me believe that there's a
solution to make it
From: Li Jun b47...@freescale.com
For A-device, when load gadget driver, we should not run udc either as this
will be controlled by otg fsm.
Signed-off-by: Li Jun jun...@freescale.com
---
drivers/usb/chipidea/udc.c |5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git
From: Li Jun b47...@freescale.com
Hi Peter,
The 2 patches are to fix the problems I found in otg fsm mode.
The 1st patch is to fix one system hang issue in otg fsm mode if runtime PM
is enabled, but can not cover vbus glitch case you found on i.MX6SX.
The 2nd patch is to stop the ci_udc_start
From: Li Jun b47...@freescale.com
In otg fsm mode, vbus_active will be updated by otg fsm, this is to fix
the system hang issue if load gadget driver with vbus turned on, because
when binding gadget driver, if vbus_active is set, udc core will pull up
DP by enable R/S bit but controller is
75 matches
Mail list logo
