s to experiment and find out.
>
> - Dave
>
>
> - Original Message -
> From: "David Paschal" <[EMAIL PROTECTED]>
> To: "David Brownell" <[EMAIL PROTECTED]>
> Cc: "Allen Barnett" <[EMAIL PROTECTED]>;
> <[EMAIL PROTECTED]&
> available" version number was 0.11 on 2.4 but 0.12 on 2.5. Perhaps some
> of Oliver's 2.5 changes helped out here.
I doubt it. That bug should have resulted in a task stuck in state D, not
an oops.
Regards
Oliver
_
David Brownell wrote in response to Allen Barnett:
> > I was able to scan in SMP mode with kernel 2.5.10, if that's helpful
> > (printer.c version 0.8 (2.4.18) vs. version 0.12 (2.5.10)).
>
> Highly suggestive, if you ask me ... :)
>
> I notice that 2.4.19-pre7 claims to be version 0.11, you mi
> > Does this reproduce if you run with only one CPU?
>
> No. I started the kernel with "nosmp" and was able to do a dozen scans
> without incident.
>
> ...
>
> I was able to scan in SMP mode with kernel 2.5.10, if that's helpful
> (printer.c version 0.8 (2.4.18) vs. version 0.12 (2.5.10)).
Am Dienstag, 30. April 2002 18:13 schrieb David Brownell:
> Looks like something nulled out urb->dev somehow ... after
> the urb got past checks for that in usbcore and usb-ohci,
> right along the submit path.
usblp_write() checks for the urb being in use
by testing urb.status == -EINPROGRESS.
In
ubject: [linux-usb-devel] Oops in USB Driver on SMP Athlon System
> Hi,
>
> I've got an SMP Athon system: Tyan S2466 motherboard (AMD 760MPX chip set)
> with an OPTi Inc. 82C861 (rev 20) (prog-if 10 [OHCI]) PCI USB board. I'm
> getting an oops trying to scan with an H
Hi,
I've got an SMP Athon system: Tyan S2466 motherboard (AMD 760MPX chip set)
with an OPTi Inc. 82C861 (rev 20) (prog-if 10 [OHCI]) PCI USB board. I'm
getting an oops trying to scan with an HP OfficeJet G85 connected to a USB
port. With kernel 2.4.18, the ksymoops output is (ptal-mlcd is the
