Hi,
Just a little mail to tell you I found a (ugly) way to have all my usb
2.0 keys well recognized by kernel. Before I had a lot of errors and my
keys were recognized about once on ten times. I just add a little delay
in drivers/usb/core/hub.c (after line 2147 for 2.6.10 kernel) with a
msleep(
Matthew Dharm wrote:
On Thu, Feb 17, 2005 at 10:13:03PM -0800, Phil Dibowitz wrote:
So I decided to try to take a leap into BK.
It took some fiddling to get it to make a patch, so this *should* work,
but I make no promises.
I haven't figured out how to test this since I haven't figured out how
to "
Am Freitag, 18. Februar 2005 04:55 schrieb Red Neuron:
> netmod - usb isdn modem built into terminal adapter; made by intracom;
> widely used in many european countries
>
> uses
> /usr/src/linux/drivers/usb/class/cdc-acm.c
>
> didn't work through kernel 2.6.7 - 2.6.9
>
> now works partially in
Hi again
I've investigated both the issue and the code, and thanks to the help
of LDD3 Ch13 (currently online at oreilly.com, btw), I now have a
better understanding of how that (doesn't) work :)
(kudos to Greg KH btw, I guess that chapter is his work)
So the error messages I already mentioned i
David Brownell wrote:
On Thursday 17 February 2005 10:10 am, Dan Streetman wrote:
How does my plan have any effect at all on you creating a software
calibration library?
And -- speaking as someone ignorant of such things -- how would such
a library be different from the existing "tslib"? Other
On Fri, 18 Feb 2005, tong changda wrote:
> Hi,
> Build Mass-storage based on pxa271, Now I want to format DOC as fat32
> filesystem.
What is DOC?
> First I run fdisk on Mobile on /dev/tffsa ,
What is Mobile?
> add a new partition,
> change filesystem type as 0xb(fat32) then write, Now
On Thu, 17 Feb 2005, Chuck Berg wrote:
> I have a system with two USB DVD burners. If I burn a disc on both at the
> same time, one of the dvdrecord processes hangs (unkillably stuck in the
> D state). The usb-storage kernel thread was also stuck in the D state.
>
> I power-cycled both burners. T
On Fri, 18 Feb 2005, Cedric Pellerin wrote:
> Hi,
>
> Just a little mail to tell you I found a (ugly) way to have all my usb
> 2.0 keys well recognized by kernel. Before I had a lot of errors and my
> keys were recognized about once on ten times. I just add a little delay
> in drivers/usb/core
On Friday 18 February 2005 7:23 am, Alan Stern wrote:
> On Thu, 17 Feb 2005, Chuck Berg wrote:
>
> > I have a system with two USB DVD burners. If I burn a disc on both at the
> > same time, one of the dvdrecord processes hangs (unkillably stuck in the
> > D state). The usb-storage kernel thread wa
On Thu, 17 Feb 2005, David Brownell wrote:
> On Wednesday 09 February 2005 12:23 pm, Alan Stern wrote:
>
> > As far as usbcore is concerned, the states an HC can be in are:
> >
> > a. Running normally.
> >
> > b. Root hub suspended.
> >
> > c. Root hub and HC both suspended.
> >
>
Ok, so I think that all are in agreement that this patch is ok. This
allows people to use hw-calibration. This should not effect people using
software calibration at all (besides having to do a one-time
software recalibration).
Signed-off-by: Dan Streetman <[EMAIL PROTECTED]>
--- linux
On Fri, Feb 18, 2005 at 02:24:44PM -0500, Dan Streetman wrote:
>
> Ok, so I think that all are in agreement that this patch is ok. This
> allows people to use hw-calibration. This should not effect people using
> software calibration at all (besides having to do a one-time
> software recalibr
Greg KH wrote:
On Wed, Feb 16, 2005 at 12:33:34AM +0100, Jeroen Vreeken wrote:
+
+#define host2zd16(n) (__cpu_to_le16((__u16)(n)))
+#define host2zd32(n) (__cpu_to_le32((__u32)(n)))
+#define zd2host16(n) (__le16_to_cpu((__u16)(n)))
+#define zd2host32(n) (__le32_to_cpu((__u32)(n)))
The usage
On Friday 18 February 2005 3:03 am, Thibaut VARENE wrote:
> Hi again
>
> On rare occasions, error -71 (-EPROTO) shows up for the same endpoint
> (ie: the only thing that changes in the logmessage is the error
> value), which seems coherent with the timeout issue ("-EPROTO:
> bitstuff error during
+ urb->status = 0;
+ urb->dev = zd->usb;
+ if(usb_submit_urb(urb, GFP_ATOMIC))
+ free = 1;
Aren't you missing a wake_up in the error case?
+ unsigned int gfp_mask = wait ? GFP_KERNEL : GFP_ATOMIC;
GFP_NOIO please. You might run nfs over the link.
R
On Fri, 18 Feb 2005 11:59:41 -0800, David Brownell <[EMAIL PROTECTED]> wrote:
> On Friday 18 February 2005 3:03 am, Thibaut VARENE wrote:
> > On rare occasions, error -71 (-EPROTO) shows up for the same endpoint
> > (ie: the only thing that changes in the logmessage is the error
> > value), which
Oliver Neukum wrote:
+ urb->status = 0;
+ urb->dev = zd->usb;
+ if(usb_submit_urb(urb, GFP_ATOMIC))
+ free = 1;
Aren't you missing a wake_up in the error case?
+ unsigned int gfp_mask = wait ? GFP_KERNEL : GFP_ATOMIC;
GFP_NOIO please. You might run nfs over the
Hello list,
it's me again. I report a new problem with the other disk (so the previous
problem is still solved, don't worry).
The kernel I used is a 2.6.11-rc4-bk6 with the following patches :
http://sjdcolin.free.fr/tmp/patches/
I did the tests with usb-storage debug and usb debug activated, the
On Fri, Feb 18, 2005 at 08:36:57AM -0800, David Brownell wrote:
> > > I have a system with two USB DVD burners. If I burn a disc on both at the
> > > same time, one of the dvdrecord processes hangs (unkillably stuck in the
> >
> > http://marc.theaimsgroup.com/?l=linux-usb-devel&m=110859441830485&w
On Friday 18 February 2005 1:23 pm, Chuck Berg wrote:
> On Fri, Feb 18, 2005 at 08:36:57AM -0800, David Brownell wrote:
> > > > I have a system with two USB DVD burners. If I burn a disc on both at
> > > > the
> > > > same time, one of the dvdrecord processes hangs (unkillably stuck in the
> > >
On Fri, 18 Feb 2005, Samuel Colin wrote:
> Hello list,
> it's me again. I report a new problem with the other disk (so the previous
> problem is still solved, don't worry).
> The kernel I used is a 2.6.11-rc4-bk6 with the following patches :
> http://sjdcolin.free.fr/tmp/patches/
>
> I did the t
Hello!
I have ZyXEL UNO modem which has usb acm interface. Starting with kernel
version 2.6.8 the driver cdc-acm began to hand when the modem connection
was dropped due to being idle. After the hang, no data could be read from
the device /dev/usb/ttyACM0, but writting was ok. The led "data" was li
Doc is Disk on Chip
Following your advice I run fdisk on my smartphone(pxa271)'s DOC to
make a partition, then using mkdosfs on this partition(mkdosfs -F 16
/dev/tffsa1), Now there is a disk driver appear, but it is write-protect.
But I could mount as vfat to read/write file on it.
There rema
On Sat, 19 Feb 2005, tong changda wrote:
> Doc is Disk on Chip
> Following your advice I run fdisk on my smartphone(pxa271)'s DOC to
> make a partition, then using mkdosfs on this partition(mkdosfs -F 16
> /dev/tffsa1), Now there is a disk driver appear, but it is write-protect.
> But I cou
24 matches
Mail list logo
