On Thu, Mar 17, 2005 at 08:22:52AM +0100, Ubel Walter wrote:
> Hello,
> I've found a memoryleak in the usb part of the linux kernel!
> I've found it in 2.4.19 but it appears also in the actual 2.4.29!
Is it also present in 2.6.11?
Do you care to write up a patch for this problem?
thanks,
greg k
On Fri, Mar 18, 2005 at 11:24:37AM +0530, [EMAIL PROTECTED] wrote:
> Hello,
>
> I am writing a driver for USB to Serial converter /bridge
> having 4 serial ports .
>
> I was going through the existing USB to Serial driver . I
> have a few questions related to those . I would be glad t
On Thu, Mar 17, 2005 at 10:54:54AM +0100, Brian Murphy wrote:
> Hi,
>driver core changes are going to take some time so how about this
> patch to fix it up for the moment in (what I think is) a satisfactory
> manner so we can have multi.interface devices working again.
>
> Executive summary:
On Thu, Mar 17, 2005 at 10:54:54AM +0100, Brian Murphy wrote:
> Hi,
>driver core changes are going to take some time so how about this
> patch to fix it up
> for the moment in (what I think is) a satisfactory manner so we can have
> multi.interface
> devices working again.
>
> Executive summ
Hi, Guys:
I would like someone who cares about cdc-acm to consider this patch.
A customer of mine hits this problem. They use a modem for remote access.
User connects, logs in. Then, bash prompt does not scroll, just overwrites
lowest line. This happens because LF is lost, only CR goes out. There
Alan Stern wrote:
On Fri, 18 Mar 2005, Sylvain Munaut wrote:
There was an important 10 ms delay missing in the 2.6.10 hub driver;
it could be causing your problem. The delay is present in 2.6.11.
Does the device work okay when plugged into a regular computer?
Yup no problem in my laptop ( 2.6.11
On Wed, Mar 16, 2005 at 03:09:36PM +0100, Clemens Ladisch wrote:
>
> This adds the product ID for another hardware revision of the Emi 2|6.
> Except for the ID, this device behaves the same and uses the same
> firmware.
>
> Signed-off-by: Clemens Ladisch <[EMAIL PROTECTED]>
Applied, thanks.
gre
On Sun, Mar 13, 2005 at 11:57:26PM -0800, Phil Dibowitz wrote:
> Greg,
>
> This patch has been sitting around, it took a while for the
> communication to go back and forth between Josef and I. Josef Reisinger
> <[EMAIL PROTECTED]> originally submitted a patch which I
> re-wrote to chuck unneeded f
On Sun, Mar 13, 2005 at 09:10:03PM -0800, Phil Dibowitz wrote:
> Guillermo Menguez Alvarez wrote:
> >Just a little patch to unusual_devs.h in usb-storage in order to support
> >new ipods mini (ie. the new 6 gig model) and possibly other new big
> >models reported to have problems through usb in lin
On Sat, Mar 05, 2005 at 02:38:43AM -0800, Phil Dibowitz wrote:
> Olaf Hering wrote:
> > On Mon, Feb 07, Phil Dibowitz wrote:
> >
> >
> >>Have your customer try that (If you want me to regen the patch for you,
> >>let me know, but that should be simple enough to just mod the patch),
> >>and if it wo
On Sun, Mar 13, 2005 at 09:27:05PM -0800, Phil Dibowitz wrote:
> Greg,
>
> This patch adds support for Another "Tekom 300" camera - or more
> specifically a BenQ DC5330.
>
> Versions of this patch were submitted by both Frank Copeland
> <[EMAIL PROTECTED]> and Manuel Fombuena <[EMAIL PROTECTED]>
On Fri, 18 Mar 2005, Sylvain Munaut wrote:
> > There was an important 10 ms delay missing in the 2.6.10 hub driver;
> > it could be causing your problem. The delay is present in 2.6.11.
> >
> > Does the device work okay when plugged into a regular computer?
>
>
> Yup no problem in my laptop (
Alan Stern wrote:
On Fri, 18 Mar 2005, Sylvain Munaut wrote:
>
I'm trying to use the ohci-ppc-soc.c but without success until now. I'm
only getting :
"usb 1-1: device not accepting address 5, error -32"
I have a working USB with a bk snapshot around 2.6.10 but using OCP and
not platform. When upd
On Fri, 18 Mar 2005, Sylvain Munaut wrote:
> Hi
>
> I'm trying to use the ohci-ppc-soc.c but without success until now. I'm
> only getting :
>
> "usb 1-1: device not accepting address 5, error -32"
>
>
> I have a working USB with a bk snapshot around 2.6.10 but using OCP and
> not platform. W
Hello David,
Now I'm working with linux-2.6.11 USB host driver (PCI
clock frequency is 33) and I have the same issue with
OHCI that I had in linux-2.6.6. This issue occurs in
'usb_start_wait_urb' function:
...
status = usb_submit_urb(urb, GFP_DMA);
if (status == 0) {
if (timeout > 0) {
i
Hi
I'm trying to use the ohci-ppc-soc.c but without success until now. I'm
only getting :
"usb 1-1: device not accepting address 5, error -32"
I have a working USB with a bk snapshot around 2.6.10 but using OCP and
not platform. When updating that working tree to the current bk version,
still usi
On Thu, 17 Mar 2005, Christopher Li wrote:
> Hi Alan,
>
> Thanks for your reply.
> > Device change events have nothing to do with either sysfs or
> > /proc/bus/usb/devices. Use hotplug.
>
> Right now VMware select() on the /proc/bus/usb/devices for the
> device change event arrived. Maybe thi
Hi,
attached is a fix to enable split iso ins and prevent a crash.
it maybe helps with Antti's crash.
Can go upstream.
Will try David's patch to improve playback soon.
cheers,
Karsten
patch header:
improve ehci split iso in support
Hunk 1 corrects a typo and thereby fixes a crash spot in tt_no
yÚzzbgÈlbgl^ðf¨Í¯I vol.00144
ªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªªª
Ô²ªh¢ ¨ ÆðoÈ¢ ¨ lbg¶
¡ªlbgö¤Ì
Ãhel kenal pÃeval (neljapÃev, 17. mÃrts 2005, 18:12-0800), kirjutas
David Brownell:
> Those are all new errors. Send stack traces and I can offer suggestions;
> they'd be the best indicators that anything's wrong!
Ok, I've attatched a crash log I produced yesterday.
It's done with preemption ena
Hi,
[re-send so that linux-usb-devel gets it too]
I see there's been a driver for zd1201 added in drivers/usb/net/.
There's a hunk missing in drivers/usb/Makefile, the driver doesn't
get built if nothing else in drivers/usb/net is configured in :
Signed-off-by: Colin Leroy <[EMAIL PROTECTED]>
--
Hi Axel, I had a problem like that with a VIA usb add-on card.
The patch below fixed it: you need to suspend the currently plugged
in device before resetting the port for the new device. This patch
is about two years old so may not apply. It never got into the kernel
because I soon afterwards bou
Hi,
I have a problem with an eGalax touch screen controller connected on a
VIA UHCI controller together with my own hardware. Sometimes when I
disconnect my own device, the eGalax controller gets disconnected as
well and immediately re-enumerates. This leads to a new assignment of a
event number w
23 matches
Mail list logo
