memset(, 0, sizeof(params));
+ params.beacon_csa.ftm_responder = -1;
Hi Johannes,
Agree with the rest, however, I think this may not be needed because
ftm_responder is already being set to -1,
if NL80211_ATTR_FTM_RESPONDER attribute is not included, in
nl80211_parse_beacon,
Use tssi calibrated value to configure tx power gain if tssi is enabled
in eeprom data
Signed-off-by: Lorenzo Bianconi
---
.../wireless/mediatek/mt76/mt76x0/eeprom.c| 20 +++
.../net/wireless/mediatek/mt76/mt76x0/phy.c | 2 +-
2 files changed, 17 insertions(+), 5
Move mt76x02_eeprom_copy utility routine in mt76x02-lib module
in order to be reused by mt76x0 driver adding tssi calibration
support
Signed-off-by: Lorenzo Bianconi
---
.../net/wireless/mediatek/mt76/mt76x02_eeprom.c | 12
.../net/wireless/mediatek/mt76/mt76x02_eeprom.h | 3
Introduce tssi calibration support in mt76x0 driver.
Configure tx power gain according to tssi calibrated value
if available
Lorenzo Bianconi (3):
mt76: move mt76x02_eeprom_copy in mt76x02-lib module
mt76x0: phy: introduce tssi calibration support
mt76x0: phy: use tssi reported value to
Run mt76x0 tssi calibration process if enabled in eeprom data.
Perform calibration procedure every 4s
Signed-off-by: Lorenzo Bianconi
---
.../net/wireless/mediatek/mt76/mt76x0/phy.c | 355 +-
drivers/net/wireless/mediatek/mt76/mt76x02.h | 3 +
On 10/29/18 1:10 PM, Johannes Berg wrote:
>>> I'd argue for trying it though as it makes the code MUCH simpler.
>> I totally agree that it will be simpler to do the work directly from
>> the cfg context rather than scheduling it.
>> On a cortex A5 MPU and SPI bus running on 48Mhz, this takes 20ms
> > I'd argue for trying it though as it makes the code MUCH simpler.
>
> I totally agree that it will be simpler to do the work directly from
> the cfg context rather than scheduling it.
> On a cortex A5 MPU and SPI bus running on 48Mhz, this takes 20ms in
> the idle case, and 100 to 300ms in
On Mon, Oct 29, 2018 at 3:27 AM Wright Feng wrote:
>
> Linux 3.6 introduces TSQ which has a per socket threshold for TCP Tx
> packets to reduce latency. In fcmode 1 and fcmode 2, host driver enqueues
> skb in hanger and TCP doesn't push new skb until host frees the skb when
> receiving fwstatus
Yes, but we may not get there?
if (!need_new_beacon)
goto skip_beacons;
ah!..yes...Thanks..
Use mt76x02_mac_wcid_setup and mt76x02_mac_shared_key_setup for
shared keys and wcid table initialization and remove duplicated
code
Signed-off-by: Lorenzo Bianconi
---
.../wireless/mediatek/mt76/mt76x2/usb_init.c | 19 +++
1 file changed, 7 insertions(+), 12 deletions(-)
diff
Hi,
Sorry for the late reply.
On Fri, 2018-10-19 at 21:47 +, adham.aboza...@microchip.com wrote:
>
> Johannes, shadow buffer has 2 more usage that I missed in my first email:
> 1- It keeps a copy of scan results to be able to auto-select from if
> the cfg80211 didn't supply a specific bssid
On Mon, 2018-10-29 at 11:59 -0700, Pradeep Kumar Chitrapu wrote:
> > memset(, 0, sizeof(params));
> > + params.beacon_csa.ftm_responder = -1;
>
> Hi Johannes,
>
> Agree with the rest, however, I think this may not be needed because
> ftm_responder is already being set to -1,
> if
On Mon, 2018-10-29 at 21:32 +, adham.aboza...@microchip.com wrote:
>
> Correct. The speed of executing the work will be the same in both
> cases (maybe a little slower in case of deferring the work)
> The intuition here was to do minimum work in the cfg's context, but
> since this isn't a
On 10/29/18 1:11 PM, Johannes Berg wrote:
> Hi,
>
> Sorry for the late reply.
No worries! Thanks for taking the time to review the driver.
>
> On Fri, 2018-10-19 at 21:47 +, adham.aboza...@microchip.com wrote:
>> Johannes, shadow buffer has 2 more usage that I missed in my first email:
>> 1-
These are for throughput enhancement with SDIO bus or with flow control
mode enabled, and also introuce a new module parameter to enhance TX
throughput as well.
Wright Feng (3):
brcmfmac: calling skb_orphan before sending skb to SDIO bus
brcmfmac: add credit numbers updating support
Linux 3.6 introduces TSQ which has a per socket threshold for TCP Tx
packets to reduce latency. In fcmode 1 and fcmode 2, host driver enqueues
skb in hanger and TCP doesn't push new skb until host frees the skb when
receiving fwstatus event. So using skb_orphan before sending skb to bus
will make
The credit numbers are static and tunable per chip in firmware side.
However the credit number may be changed that is based on packet pool
length and will send BRCMF_E_FIFO_CREDIT_MAP event to notify host driver
updates the credit numbers during interface up.
The purpose of this patch is making
If we are associated and scanning is performed , sw_scan_complete callback
is done after we get back to operating channel, so we do not perform
phy calibration and queue cal work. Fix this by run calibration from
sw_scan_complete().
Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during
This patch is for adding a new module parameter "frameburst".
With setting "frameburst=1" in module parameters, firmware frameburst mode
will be enabled. The feature can enable per-packet framebursting in
firmware side and get higher TX throughput in High Throughput(HT) mode.
Signed-off-by:
From: Adham Abozaeid
Validate input parameters to set_wiphy_param before scheduling
handle_cfg_param() to validate them.
This way proper errors can be returned to caller.
Also cleaned up unused code in handle_cfg_param.
Changes since v1:
- Correction spelling in subject of patch#2
From: Adham Abozaeid
Validate cfg parameters after being called by cfg80211 in set_wiphy_params
before scheduling the work executed in handle_cfg_param
Signed-off-by: Adham Abozaeid
---
drivers/staging/wilc1000/host_interface.c | 61 ++-
From: Adham Abozaeid
handle_cfg_param() receives a bit map that describes what to be changed.
Some of these bits flags aren't referred to from elsewhere and can be
removed.
Signed-off-by: Adham Abozaeid
---
drivers/staging/wilc1000/host_interface.c | 216 --
From: Adham Abozaeid
host_if_drv.cfg_values is a write only member, and can be removed
Signed-off-by: Adham Abozaeid
---
drivers/staging/wilc1000/host_interface.c | 13 -
drivers/staging/wilc1000/host_interface.h | 1 -
2 files changed, 14 deletions(-)
diff --git
From: Adham Abozaeid
After removing cfg_values member, cfg_values_lock that was used to protect
it can also be removed.
Signed-off-by: Adham Abozaeid
---
drivers/staging/wilc1000/host_interface.c | 9 -
drivers/staging/wilc1000/host_interface.h | 2 --
2 files changed, 11 deletions(-)
On 10/29/2018 8:26 PM, Kalle Valo wrote:
> Ajay Singh writes:
>
>> On 10/9/2018 4:06 PM, Johannes Berg wrote:
>>> On Tue, 2018-10-09 at 16:04 +0530, Ajay Singh wrote:
>>>
>> +typedef void (*wilc_remain_on_chan_expired)(void *, u32);
>> +typedef void (*wilc_remain_on_chan_ready)(void *);
From: Ajay Singh
We would like to update the maintainer email id's for wilc1000 driver.
Signed-off-by: Ajay Singh
Signed-off-by: Adham Abozaeid
---
MAINTAINERS | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7c7af53..9647ec7 100644
---
Stanislaw Gruszka writes:
> If we are associated and scanning is performed , sw_scan_complete callback
> is done after we get back to operating channel, so we do not perform
> phy calibration and queue cal work. Fix this by run calibration from
> sw_scan_complete().
>
> Fixes: bbd10586f0df
Johannes Berg writes:
> On Sat, 2018-10-13 at 12:55 +0300, Kalle Valo wrote:
>>
>> > struct cfg80211_ops {
>> >int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
>>
>> It would be nice to document if these ops can sleep or not.
>
> I don't think we've documented that
Sergey Matyukevich writes:
>> > +config QTNFMAC_TOPAZ_PCIE
>> > + tristate "Quantenna QSR1000/QSR2000 PCIe support"
>> > + default n
>> > + depends on PCI && CFG80211
>> > + select QTNFMAC
>> > + select FW_LOADER
>> > + select CRC32
>> > + help
>> > + This
Remove MT_TSO_CTRL and MT_HEADER_TRANS_CTRL_REG initialization since
it is already done in mt76_write_mac_initvals routine
Signed-off-by: Lorenzo Bianconi
---
drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c | 3 ---
1 file changed, 3 deletions(-)
diff --git
Stanislaw Gruszka writes:
> We use always 1 as band parameter for MCU_CAL_LC, this break 2GHz,
> we should use 0 for this band instead.
>
> Patch fixes problems happened sometimes when try to associate with 2GHz
> AP and manifest by errors like below:
>
> [14680.920823] wlan0: authenticate with
Ajay Singh writes:
> On 10/9/2018 4:06 PM, Johannes Berg wrote:
>> On Tue, 2018-10-09 at 16:04 +0530, Ajay Singh wrote:
>>
> +typedef void (*wilc_remain_on_chan_expired)(void *, u32);
> +typedef void (*wilc_remain_on_chan_ready)(void *);
>>> I think as per coding style the typedef for
32 matches
Mail list logo
