Russell King writes:
> Fix these errors reported by the 0-day builder by replacing the
> linux/export.h include with linux/module.h.
>
> In file included from include/linux/platform_device.h:14:0,
> from drivers/net/wireless/ath/ath5k/ahb.c:20:
> include/linux/device.h:1463:1: wa
On 01/31/2017 11:17 AM, Russell King - ARM Linux wrote:
> Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
> unnecessary dependency for quite a large amount of the kernel. There's
> very little which actually requires definitions from phy.h in net/dsa.h
> - the include itself
Hi Ashok,
[auto build test WARNING on ath6kl/ath-next]
[also build test WARNING on v4.10-rc6 next-20170131]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux/commits/Ashok-Raj-Nagarajan/ath10k-add-support
Hi Ashok,
[auto build test ERROR on ath6kl/ath-next]
[also build test ERROR on v4.10-rc6 next-20170130]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci/linux/commits/Ashok-Raj-Nagarajan/ath10k-add-support-for-
On 01/31/2017 01:19 PM, Russell King wrote:
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c:58:12: error: dereferencing
pointer to incomplete type 'struct phy_device'
Add linux/phy.h to emac-sgmii.c
Signed-off-by: Russell King
---
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
The v
Currently mesh moving fail average is calculated based on constant
weight factor. In worst case moving average reaches threshold by
considering 16 msdu tx ack status and deactivates mesh path. Having
a constant weight factor might not be suitable for all environments.
So make it tunable parameter a
As moving average is not considering fractional part after
certain ratio, it will stuck at the same state. For example
with current values, moving average stuck at 96 and it will
not move forward. Fortunately current threshold is matching
against 95%. If thresold is increased more than 96, mesh pat
Mesh moving average should be cleared, whenever mesh paths
to the given station are deactivated due to bad link. It makes
path deactivation logic more robust by considering more tx
status before terminating mesh link.
Signed-off-by: Rajkumar Manoharan
---
v2:
* removed paths_deactivated check
*
On 2017-01-31 11:46, Thomas Pedersen wrote:
On Tue, Jan 31, 2017 at 11:33 AM, Rajkumar Manoharan wrote:
On 2017-01-31 09:51, Thomas Pedersen wrote:
[...]
+ if (paths_deactivated)
+ sta->mesh->fail_avg = 0;
.. why this indirection? Just reset mesh->fail_avg unconditiona
Hi Russell,
On 01/31/2017 02:18 PM, Russell King wrote:
> Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc
> code:
>
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put':
> net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration
On Tue, Jan 31, 2017 at 11:33 AM, Rajkumar Manoharan
wrote:
> On 2017-01-31 09:51, Thomas Pedersen wrote:
>>
>> Hi Rajkumar,
>>
>> Thanks this looks good, but..
>>
>> On Fri, Jan 27, 2017 at 4:01 PM, Rajkumar Manoharan
>> wrote:
>>>
>>> Mesh moving average should be cleared, whenever mesh paths
>
On 2017-01-31 09:51, Thomas Pedersen wrote:
Hi Rajkumar,
Thanks this looks good, but..
On Fri, Jan 27, 2017 at 4:01 PM, Rajkumar Manoharan
wrote:
Mesh moving average should be cleared, whenever mesh paths
to the given station are deactivated due to bad link. This will
give enough room to anal
On Tue, 2017-01-31 at 19:19 +, Russell King wrote:
> drivers/target/iscsi/iscsi_target_login.c:1135:7: error: implicit declaration
> of function 'try_module_get' [-Werror=implicit-function-declaration]
>
> Add linux/module.h to iscsi_target_login.c.
>
> Signed-off-by: Russell King
> ---
>
drivers/net/usb/lan78xx.c:394:33: sparse: expected ; at end of declaration
drivers/net/usb/lan78xx.c:394:33: sparse: Expected } at end of
struct-union-enum-specifier
drivers/net/usb/lan78xx.c:394:33: sparse: got interface
drivers/net/usb/lan78xx.c:403:1: sparse: Expected ; at the end of type
decl
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c:58:12: error: dereferencing
pointer to incomplete type 'struct phy_device'
Add linux/phy.h to emac-sgmii.c
Signed-off-by: Russell King
---
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers
drivers/net/ethernet/broadcom/bgmac.c:1015:17: error: dereferencing pointer to
incomplete type 'struct mii_bus'
drivers/net/ethernet/broadcom/bgmac.c:1185:2: error: implicit declaration of
function 'phy_start' [-Werror=implicit-function-declaration]
drivers/net/ethernet/broadcom/bgmac.c:1198:2: e
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected
declaration specifiers or '...' before string constant
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition
has no type or storage class
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error:
drivers/net/ethernet/marvell/mvneta.c:2694:26: error: storage size of 'status'
isn't known
drivers/net/ethernet/marvell/mvneta.c:2695:26: error: storage size of 'changed'
isn't known
drivers/net/ethernet/marvell/mvneta.c:2695:9: error: variable 'changed' has
initializer but incomplete type
drive
drivers/net/ethernet/freescale/fman/fman_memac.c:519:21: error: dereferencing
pointer to incomplete type 'struct fixed_phy_status'
Add linux/phy_fixed.h to fman_memac.c
Signed-off-by: Russell King
---
drivers/net/ethernet/freescale/fman/fman_memac.c | 1 +
1 file changed, 1 insertion(+)
diff
octeon-platform.c can not be built as a module for two reasons:
(a) the Makefile doesn't allow it:
obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
(b) the multiple *_initcall() statements, each of which are translated
to a module_init() call when attempting a module bu
drivers/target/iscsi/iscsi_target_login.c:1135:7: error: implicit declaration
of function 'try_module_get' [-Werror=implicit-function-declaration]
Add linux/module.h to iscsi_target_login.c.
Signed-off-by: Russell King
---
drivers/target/iscsi/iscsi_target_login.c | 1 +
1 file changed, 1 inse
Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc
code:
net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put':
net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration
of function 'module_put' [-Werror=implicit-function-declaration]
Fix these errors reported by the 0-day builder by replacing the
linux/export.h include with linux/module.h.
In file included from include/linux/platform_device.h:14:0,
from drivers/net/wireless/ath/ath5k/ahb.c:20:
include/linux/device.h:1463:1: warning: data definition has no type
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
unnecessary dependency for quite a large amount of the kernel. There's
very little which actually requires definitions from phy.h in net/dsa.h
- the include itself only wants the declaration of a couple of
structures and IFNAMSI
drivers/net/ethernet/cadence/macb.h:862:33: sparse: expected ; at end of
declaration
drivers/net/ethernet/cadence/macb.h:862:33: sparse: Expected } at end of
struct-union-enum-specifier
drivers/net/ethernet/cadence/macb.h:862:33: sparse: got phy_interface
drivers/net/ethernet/cadence/macb.h:877:1
net/core/netprio_cgroup.c:303:16: error: expected declaration specifiers or
'...' before string constant
MODULE_LICENSE("GPL v2");
^~~~
Add linux/module.h to fix this.
Signed-off-by: Russell King
---
net/core/netprio_cgroup.c | 1 +
1 file changed, 1 insertion(+)
di
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an
unnecessary dependency for quite a large amount of the kernel. There's
very little which actually requires definitions from phy.h in net/dsa.h
- the include itself only wants the declaration of a couple of
structures and IFNAMSI
On 01/31/2017 10:41 AM, Ashok Raj Nagarajan wrote:
This patch adds support to set transmit power setting type and transmit
power level attributes to NL80211_CMD_SET_STATION in order to facilitate
adjusting the transmit power level of a station associated to the AP.
The added attributes allow sel
On 01/31/2017 10:41 AM, Ashok Raj Nagarajan wrote:
This patch introduce a new driver callback drv_sta_set_txpwr. This API will
copy the transmit power value passed from user space and call the driver
callback to set the tx power for the station.
Signed-off-by: Ashok Raj Nagarajan
---
include/n
On 01/31/2017 10:42 AM, Ashok Raj Nagarajan wrote:
This patch will add the support to control the transmit power for traffic
to a station associated with the AP. Userspace provide the transmit power
value in mBm units and the allowed range is from 0 to 70. Underlying FW
How did you come up with
This patch introduce a new driver callback drv_sta_set_txpwr. This API will
copy the transmit power value passed from user space and call the driver
callback to set the tx power for the station.
Signed-off-by: Ashok Raj Nagarajan
---
include/net/mac80211.h| 6 ++
net/mac80211/cfg.c
This patch adds support to set transmit power setting type and transmit
power level attributes to NL80211_CMD_SET_STATION in order to facilitate
adjusting the transmit power level of a station associated to the AP.
The added attributes allow selection of automatic and limited transmit
power level,
This patch will add the support to control the transmit power for traffic
to a station associated with the AP. Userspace provide the transmit power
value in mBm units and the allowed range is from 0 to 70. Underlying FW
will enforce that the maximum tx power will be based on the regulatory
requirem
With QCA4019 platform, SRAM address can be accessed directly from host but
currently, we are assuming sram addresses cannot be accessed directly and
hence we convert the addresses.
While there, clean up growing hw checks during conversion of target CPU
address to CE address. Now we have function p
Hi Rajkumar,
Thanks this looks good, but..
On Fri, Jan 27, 2017 at 4:01 PM, Rajkumar Manoharan
wrote:
> Mesh moving average should be cleared, whenever mesh paths
> to the given station are deactivated due to bad link. This will
> give enough room to analysis more tx status than retaining the
>
* Kalle Valo [170130 22:36]:
> Tony Lindgren writes:
>
> > * Pavel Machek [170127 11:41]:
> >> On Fri 2017-01-27 17:23:07, Kalle Valo wrote:
> >> > Pali Rohár writes:
> >> >
> >> > > On Friday 27 January 2017 14:26:22 Kalle Valo wrote:
> >> > >> Pali Rohár writes:
> >> > >>
> >> > >> > 2) I
One thing to consider: Older ath9k and maybe madwifi used a different
congestion control,
and it got higher throughput in optimal situations in our testing. When it was
removed
from the kernel, there was some effort to improve the minstrel_ht algorithm,
but I don't
think it ever performed qui
Michal Kazior wrote:
> Firmware files are versioned to prevent older
> driver instances to load unsupported firmware
> blobs. This is reflected with a fallback logic
> which attempts to load several firmware files.
>
> This however produced a lot of unnecessary
> warnings sometimes confusing user
A few announcements:
- We expect to open up registration and announce hotel and location
next week.
- We are pleased to announce the first netdev 2.1 talk has been accepted
by the tech committee! The Call for Proposals is still open, submit
early to avoid the hazards of last minute traffic. Refe
Enable AP support for allmulticast for MDNS. It can be enabled by bringing
up the interface with ip command with argument allmulticast on
Signed-off-by:Iain Hunter
---
PATCH v3: fixes tabbing
drivers/net/wireless/ti/wlcore/main.c | 15 +++
1 file changed, 15 insertions(+)
diff --g
On 31 January 2017 at 10:52, Wojciech Dubowik
wrote:
> On 31/01/17 10:46, Klaus Kinski wrote:
>>
>> BTW, if I read the sources correctly, than IBSS mode uses the TXQ
>> parameters from ieee80211_set_wmm_default with enable_qos = false which
>> means that qparam.txop = 0, e.g. bursting is disabled.
On Tue, Jan 31, 2017 at 09:36:28AM +0200, Luca Coelho wrote:
> On Mon, 2017-01-30 at 21:04 -0500, Mel Stimmel wrote:
> > I have a problem that recently arose with my Thinkpad model T61
> > running Ubuntu 16.04 with the Intel Pro 4965 installed.
> > This system was working just fine until
On 30-1-2017 16:09, Rafał Miłecki wrote:
> From: Rafał Miłecki
>
> This method may be unsupported (see: USB bus) or may just fail (see:
> SDIO bus).
> While at it rework logic in brcmf_sdio_bus_get_memdump function to avoid
> too many conditional code nesting levels.
Acked-by: Arend van Spriel
On 30-1-2017 16:09, Rafał Miłecki wrote:
> From: Rafał Miłecki
>
> It's important to inform user so he knows things went wrong. He may also
> want to get memory dump for further debugging purposes.
Acked-by: Arend van Spriel
> Signed-off-by: Rafał Miłecki
> ---
> drivers/net/wireless/broadcom
As reported by Felix:
Though protected by an ifdef, introducing an usb symbol dependency in
the rt2x00lib module is a major inconvenience for distributions that
package kernel modules split into individual packages.
Get rid of this unnecessary dependency by calling the usb related
function from a
diff --git a/drivers/net/wireless/ti/wlcore/main.c
b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..7d3f15d5d5c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,21 @@ static void wl1271_op_configure_filter(struct
ieee80211_h
diff --git a/drivers/net/wireless/ti/wlcore/main.c
b/drivers/net/wireless/ti/wlcore/main.c
index 3241e9eba73..7d3f15d5d5c 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3281,6 +3281,21 @@ static void wl1271_op_configure_filter(struct
ieee80211_h
Enable AP support for allmulticast for MDNS It can be enabled by bringing
up the interface with ip command with argument allmulticast on
Signed-off-by: Iain Hunter
---
PATCH v2: resumbitting to handle error return value
drivers/net/wireless/ti/wlcore/main.c | 15 +++
1 file changed
On 31/01/17 10:46, Klaus Kinski wrote:
BTW, if I read the sources correctly, than IBSS mode uses the TXQ
parameters from ieee80211_set_wmm_default with enable_qos = false
which means that qparam.txop = 0, e.g. bursting is disabled. Am I right?
I guess so. But you need to look also at contentio
On 31 January 2017 at 07:24, Rafał Miłecki wrote:
> I just noticed my DIR-885L has some weird NVRAM format. Linux doesn't
> support it, it reads only part of it, which may affect brcmfmac.
>
> There goes the most interesting part:
> 46 4c 53 48 50 3e 00 00 3f 01 00 00 4b 01 00 00 |FLSH
Then you need to use CONFIG debug flag. WMM parameters are not set when
MESH compile flag is enabled. At least I have had once such problem.
Wojtek
PS It would be actually nice to have sth like madwifi's wlanconfig ...
list wme to
print QoS settings in current systems.
On 31/01/17 10:38, K
On Thursday 26 January 2017 03:11 PM, Johannes Berg wrote:
> On Wed, 2017-01-25 at 17:01 +0530, Vasanthakumar Thiagarajan wrote:
>> Sharing DFS channel state across multiple wiphys (radios) could
>> be useful with multiple radios on the system. When one radio
>> completes CAC and marks the channel
On Thursday 26 January 2017 03:06 PM, Johannes Berg wrote:
>
>> +static bool cfg80211_off_channel_oper_allowed(struct wireless_dev
>> *wdev)
>> +{
>> +if (!cfg80211_beaconing_iface_active(wdev))
>> +return true;
>> +
>> +if (!(wdev->chandef.chan->flags & IEEE80211_CHAN_RADAR))
>
On Thursday 26 January 2017 03:04 PM, Johannes Berg wrote:
>
>> +/* Should we apply the grace period during beaconing
>> interface
>> + * shutdown also?
>> + */
>> +cfg80211_sched_dfs_chan_update(rdev);
>
> It might make some sense, say if hostapd cra
On Wednesday 25 January 2017 11:50 PM, Jean-Pierre Tosoni wrote:
>> -Message d'origine-
>> De : linux-wireless-ow...@vger.kernel.org [mailto:linux-wireless-
>> ow...@vger.kernel.org] De la part de Vasanthakumar Thiagarajan
>> Envoyé : mercredi 25 janvier 2017 12:31
>> À : johan...@sipsoluti
55 matches
Mail list logo
