On Wed, 2014-12-10 at 00:21 +0200, Vadim Kochan wrote:
It allows to identify the wlan kind of device for the user application,
Applied,
+static struct rtnl_link_ops wireless_link_ops __read_mostly = {
+ .kind = wlan,
+};
but I've made this const. It only needs to be non-const
Hi Johannes,
have we considered also exposing the mode of this netdev. So for
example sta,ap,p2p-go,p2p-client etc. If we can send dynamic updates
via RTNL, we could easily tell the networking management system what
type of wireless device we have here. I am thinking about it like
Hi Vadim,
It allows to identify the wlan kind of device for the user application,
e.g.:
# ip -d link
1: lo: LOOPBACK,UP,LOWER_UP mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0
2:
It allows to identify the wlan kind of device for the user application,
e.g.:
# ip -d link
1: lo: LOOPBACK,UP,LOWER_UP mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 promiscuity 0
2: enp0s25:
Hi Johannes,
On Dec 9, 2014, at 23:21, Vadim Kochan vadi...@gmail.com wrote:
It allows to identify the wlan kind of device for the user application,
e.g.:
# ip -d link
1: lo: LOOPBACK,UP,LOWER_UP mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
On Wed, Dec 10, 2014 at 12:23:14AM +0100, Marcel Holtmann wrote:
Hi Johannes,
On Dec 9, 2014, at 23:21, Vadim Kochan vadi...@gmail.com wrote:
It allows to identify the wlan kind of device for the user application,
e.g.:
# ip -d link
1: lo: LOOPBACK,UP,LOWER_UP mtu 65536