Re: EPIA-M serial port 1/2 baud rate insanity

you very much for the patch. :) -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key, please

Re: epia-m results of getpir [PMX:#]

that right here: how does it compare to what's in linuxbios? same? different? ron ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax

Re: migrate VIA vt5426 to PCChip M787CL(not M787CL+)

devfn above (I think) 0x40, the chipset locks up. Sorry. ron ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542

Re: epia-m (600mhz) -- /dev/ttyS1

list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok

Re: LinuxBios in epia m-10000 (freebios2)

but with 2 lan's and pcmcia slot for wireless. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp

p64h2_enable_ioapic

it properly, I think we have to detect the number of APIC instead of hard code it. Comment? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road

Re: read the source ron!

); pci_assign_irqs(0, 0x14, slotIrqs); } ok, that explains it! ron ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax

Re: V2 VIA EPIA

___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong

Re: V2 VIA EPIA

for [VIA 86C100] Boot from (N)etwork or from (L)ocal? clocks_per_tick = 504240 N I am now initializing the ide system On Tue, Sep 30, 2003 at 11:36:25PM -0600, ron minnich wrote: On Wed, 1 Oct 2003, Andrew Ip wrote

Re: memory epia-m 127M != 512M

-- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key, please obtain it from http://www.keyserver.net

Re: epia-m 600 -- still not working

on the serial console). You probably want to copy the 0:00.0 pci register setting to the raminit.inc. Most likly is the memory bank/type causing the problem. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit

Re: Possible bug in DDR SDRAM init code for VT8623?

://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key

Re: epia-m 600 -- still not working

is the wrong thing to do. If somebody has the time they need to go in and get rid of the magic numbers use the SPD properly. ron -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory

Re: the EPIA universe

___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai

Re: the EPIA universe

Hi, nehemiah works with 586 compiled linux kernel. It might need 586 glibc also. When I hooked up a PIII RedHat, EPIA hangs after init. I had to intall from scratch. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866

Re: epia800

Hi Ron, fixes welcome. This is CF that is failing. Actually it reads the data and the data is fine, but when it jumps to the payload nothing happens. Have you tried different CF? Different CF behave differently. Some CF card need more delay/timeout in the IDE driver. -Andrew -- Andrew Ip

Re: epia800

Hi Ron, actually, as near as we could tell the data was getting in to memory. But once it jumped to the payload it never came back. Interesting. What payload are u using? I have been using etherboot which is pretty stable. However, Filo will be my next target. -Andrew -- Andrew Ip Email

Re: epia800

Hi Ron, etherboot we built here. We have not had much luck building etherboot, however. I have been using 5.0.6 with Adam's patch. Have you tried earlier version? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux

Re: DoC on Eipa

Hi Niki, what is so complex with ddr? could you send me / point me to some more info about init a ddr? or ask the guys at via? It is the hardware limitation since the ddr init code probably does not fit in ipl area of DOC which is only 512byte . -Andrew -- Andrew Ip Email: [EMAIL PROTECTED

Re: DoC on Eipa

Hi Niki, yes. i got the point. but to be sure we need to know _how_ a ddr is initialized. so the question is -- who knows how to init a ddr? It is already checked in. Checkout the memory init code under vt8623. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax

Re: DoC on Eipa

Hi, where can i get more info in how to init the mem on a epia-m? do i have to rev eng the bios? read the linuxbios source, of course! I think EPIA-M is even harder to fit into IPL. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852

Re: DoC on Eipa

Hi, I think EPIA-M is even harder to fit into IPL. why do you think so? More steps are required to init DDR. It might not fit in 512 bytes. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F

Re: USB Memory Key booting

access already. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key, please obtain it from

Re: EPIA-M 10000 etherboot

, give me some hints~ :-) DDRº¸´Ù ½Å³­´Ù! ¿Â¶óÀÎÀ¸·Î Áñ±â´Â 3D¾Æ¹ÙŸ ´í½Ì °ÔÀÓ http://showtime2.freechal.com/index.asp -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Benefit of using ROM Emulator and debugging on VT8623/VT8235

works but LinuxBIOS doesn't. However, both has the same IRQ assignments. Furthermore, same code works on EPIA-M with proper IRQ settings. Any suggestion on debugging tools? Thanks. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201

Re: Supporting extension ROMs and beyond...

like the following in the config which is pretty much like Ron suggested before extension1 extension2 extension3 elfloader ide usb net -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong

Re: tools for programing?

from here... That's right. SF has a little bit of improvement lately. At least it is not rejecting connection. :) -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Re: Backoirted oatch to 2.4.19 for kexec does not work

? It did work here. I was able to boot from DOC, then mount ide hd and kexec the kernel without any problem. Since the patch is pretty old, it might be a problem if you are using the latest kexec program. Have you tried older version? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852

Re: tools for programing?

in the kernel to boot? I checked in the code couple weeks ago, the current flash_rom should work. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle

Re: EPIA-ME6000

. That's why you are getting garbage. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. For public pgp key

Re: EPIA-ME6000

Hi, Any idea why? Broken hardware? Undocumented setups for the serial port? Most likely undocumented setup, 'coz my code works on another custom board with the same chipset. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866

Re: Linuxbios and Via M10000, where to start?

unsure of its function too. In the donwload page of linuxbios.org there is a link to other software, I have to download that too? You can follow the HOWTO for EPIA to get started. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866

Re: Mini-ITX

think it should be possible to write a little script to extract vgabios from the system and then combine it with linuxbios. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory

Re: Do I need to make Makefile.conf for myself?

own? For testing, you can use mine which is located at ftp://ftp.cwlinux.com/pub/downloads/linuxbios-sdk/kernel/elfkernel Since it is compiled with 386 setting, it probably will boot from most system. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036

Re: Can you check my result, is it right?

/ ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building

Re: EPIA-M DDR ram init progress

is accessed with the vt8235 registers, but the DDR dram control registers are part of the northbridge. SMBUS/SPD should be in southbridge like other platforms. Then, mainboard's Config can include those code such that raminit.inc can call later. E7500 is a very nice reference. -Andrew -- Andrew Ip

Re: linuxbios + epia-m + vga success, here are details [PMX:#]

Hi, OK, looks like Ill be implementing this unless Andrew Ip already committed something (but I have not seen it). Not yet. I still have to work on the DDR config for EPIA-M. Help are welcome. :) -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542

Re: EPIA-M SPD progress [PMX:#]

. :) -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp

Re: EPIA-M DDR SPD detection [PMX:#]

Hi Ron, are you sure that the I2C is not being read now on EPIA-M? I have not looked but it seems it ought to be. DDR init is now hardcoded such that it might work for some DDR but not all. In long term, SPD will be implemented. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852

Re: LinuxBios-help!

. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key

Re: DIP / PLCC

is able to see the DOC with mtd. However, we haven't done anything further. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok

Re: epia-m: NO VGA FOUNDg

Hi, It means LinuxBIOS has not enabled the internal VGA device. Try option HAVE_FRAMEBUFFER=1. If that fails, wait for a comment from Andrew.. :) I don't think the vga is enbled yet, but it is on my todo list. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax

Re: NC-670

, but vt82c686 is already in the tree. I think vt8605 is similar to vt8601(EPIA) with different display unit. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A

Re: Trying to freeze and failing ...

think we can do the following, if ecc option is on, then check for ecc availibility if ecc is availible, then enable ecc; otherwise, skip ecc. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai

Re: LinuxBios PPC-support.. U-Boot project

Interesting, I didn't know that. So I can write my own cli and jump to it from LinuxBios instead of booting Linux? I think Adam has done LinuxBIOS + Redboot before. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux

Re: linuxbios

, but I haven't tried it recently. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax

Re: Trying to freeze and failing ...

|= SYSCFG_MSR_MtrrVarDramEn; - lo |= SYSCFG_MSR_SysEccEn; +// lo |= SYSCFG_MSR_SysEccEn; wrmsr(SYSCFG_MSR, lo, hi); rdmsr(SYSCFG_MSR, lo, hi); printk_spew(SYSCFG IS NOW 0x%x:0x%x\n, hi, lo); -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542

Re: EPIA PCI slot

to 0x06. a 6 to 4. Thanks for the catch. IIRC, I did have extra ethernet card working before. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak

Re: linuxbios and bochs

Hi Brian, The initrd is 3MB uncompressed. I require a few utilities (bash, echo, mount, tar, and umount). Have you tried busybox and uclibc? You can safe quite alot storage area. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852

Re: linuxbios and bochs

I think Andrew Ip has similar problem with his EPIA. I think Bochs BIOS and VGA BIOS are running with cache on. Try changing mem.basek value from 768 to 1024 in northbridge.c, it will report 0xC-0xF area as no ram, so it will not cached. I have got it fix when enabling VIDEO_CONSOLE

Re: PPC

on it. Are all the PPC code in the cvs? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046

Re: problem with PCHIPS M758LT+

. But my kernel can't find such a device (nothing in dmesg, nothing in lspci -vvv). I've activated it in the bios, but it's still invisible. Any experience with sound on this mobo? Try # modprobe cmpci -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542

Re: [epia] Unknown bootloader class

I could'nt get any more than 64mb of ram recognised using the raminit.inc approach, and even that 64mb was showing lots of errors. So i reworked things to uses the generic spd stuff. I did intend on producing a patch to send in to Andrew IP, but i ran out of time then my linuxbios got out

Re: off topic: CF -gt; IDE Where and which to buy?

it the root filesystem, but that is about it. If you really want to boot the USB-CF, you can use DOC with kexec as a boot loader. Then, you can mount the CF, and run kexec kernel from the CF. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852

Re: SiS630 Disabling Embedded Devices (was: Software Watchdog Timer)

to remove that line and now everything works fine. -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542

Re: [epia] Unknown bootloader class

# CONFIG_MK7 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852

Re: SiS630 Disabling Embedded Devices (was: Software Watchdog Timer)

, some applications might not want to disable audio. Even storing IRQ assignment is also very useful for debugging purpose. Storing boot option is useful, too. I'm just thinking flexablity here. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile

New version of DOC Millennium MD2802-D08

MD2802-D08 is the new version of MD2800-D08. Basically it is the same with newer packing, and it is working with LinuxBIOS!!! -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong

Re: ADLO for EPIA

will enable the vga device. Hope this help. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046

Re: problem with udelay solved - romimage too big

. His patch supports ext2, ext3 and vfat at the moment. Shouldn't be too hard to support other filesystems also since most of the code can be extracted from grub. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux

EPIA HOWTO

I have just checked in a HOWTO for EPIA. Thanks to Mark Wilkinson for providing us this document. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Re: irq_routing_table can't be copied to 0xf0000

yes , CONFIG_COMPRESS=0 but it seems there is no effect, should i set kernel pci access mode to any or direct? PCI access mode has to be direct. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit

Re: irq_routing_table can't be copied to 0xf0000

no any progress. linux can't assign pci irq. what's wrong? Have you run getpir to get the correct pirq table? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Status page

Looks like status page is not being updated, eg 787 is not in the list. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok

Re: Getting a small cluster running - PC-Chips 810

don't think it is supported at the moment. Ollie, do you have any info about this board which is using 730D chipset. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Re: Getting a small cluster running - PC-Chips 810

it between slaves for this step. One of the advantages of LinuxBIOS is you can flash rom in Linux using flash_on and flash_rom which comes with LinuxBIOS. With these utils, you don't need mtd. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852

Re: gx1 ram size error

: support diskonchip 2000 I haven't seen this problem on 5823. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong

Re: can pcm-5823 boot linux from doc directly

pretty nicely. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036

Re: Re: Re:Re:Re:Re: rtl8139 NIC IRQ is 0 on m758lmr+ mainboard

. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp

Re: build problem for console_tx_al problem.

/intel.h which I checked in for EPIA. I have removed those changes. It should build now. Sorry guys, I should have double check this. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong

Re: rtl8139 NIC IRQ is 0 on m758lmr+ mainboard

My rtl8139 NIC IRQ is 0 on m758lmr+ mainboard. I used getpir to get new irq_table.c,but the IRQ still is 0. Who can tell me what should I do? Thanks. Have you set kernel to use direct pci probe? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036

Re: Via EPIA - Success

I submit my modification, assuming you wan't them of course! Russell ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax

Re: keyboard enable

-Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp key

Re: pc chips 810

# # General setup # CONFIG_NET=y CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y You may want to change pci probing to direct only. -Andrew -- Andrew Ip Email

Re: Linuxbios on amibios chip

.rpm 2. install package $ rpm -Uvh linuxbios-utils-cvs-020906.i386.rpm 3 turn on flash write enable $ flash_on 4 flash rom $ flash_rom m810-ide.rom Hope this help. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux

Re: APM support in linuxbios.

to do with these file? I think your code is pretty old. These files are required. You also probably need to regenerate your build directory to reflect the new change. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux

Re: sdram on board

is set to 1. Try to set it to 0. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax

Re: VIA EPIA

documentation is not very explicit in this direction. Any help, suggestion would be greatly appreciated.. Thanks SS ___ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL

Re: VIA EPIA up!

I have an EPIA board hopefully arriving this morning. Plan to get some more in the new year. Via is also having EPIA-M which supports ddr and dvd. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B

Re: VIA EPIA up!

tried that recently? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542

Re: VIA EPIA up!

Ron, Now, the question is, what's the right etherboot image for this board? Anybody built one yet? I put them at http://www.cwlinux.com/downloads/linuxbios-sdk/images/romimages/epia.rom It will load kernel from hda1, then etherboot. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel

Re: [COMMIT] EPIA irq fixed, thanks to Kevin Hester

The EPIA mini-ITX that I have boots fine with 2.4.18 with the BIOS that came with it. Doesn't this mean that it is a bridge setup issue? Or does it not happen on all boards? Normal bios boots ok but not with LinuxBIOS. There could be some magic setting for that. -Andrew -- Andrew Ip Email

[COMMIT] EPIA irq fixed, thanks to Kevin Hester

. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036 For public pgp

Re: Build failure!

struct irq_info slots[]; to struct irq_info *slots; -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong

Re: National Semiconductor Geode GX1 ?

=Embedded+PCsmodel=SBC84510VEEmodel_table=epc The config is similar to advantech's pcm-582X series. Should be possible to get LinuxBIOS support on these. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F

Re: geode PIRQ mess in 2.4.19

is the table. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036

Re: [COMMIT] pirq_routing.c

. Just want to confirm winfast 6300 with flash rom. It behaves as the same as pcm-5823. Looks like copy pirq table only works with DOC. LinuxBIOS with flash rom doesn't need copy pirq table and probably won't work with CONFIG_COMPRESS=1. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel

pcm-5823 pirq table and ide

this. Does anyone know how to turn on the second IDE channel on 5823-E0A1? Enabling bit 3 and 4 on 0x5b doesn't do the trick this time. Thanks. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai

Re: pcm-5823 pirq table and ide

normal bios. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852)2542 2036

[COMMIT] pirq_routing.c

freebios/src/arch/i386/lib/pirq_routing.c - Added verification of the copy of pirq routing table. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle

Re: [COMMIT] pirq_routing.c

. However, Linux kernel is able to find the pirq routing table at 0xc00f6c90. These problem doesn't happen to winfast 6300. , but it failed -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory

Re: [COMMIT] pirq_routing.c

Ron, These problem doesn't happen to winfast 6300. Hmm, the copy to 0xf succeeds on the winfast? It does work. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory

[COMMIT] fixes for pcm-5823

the eepro portion in mainboard/advantech/pcm-5823/mainboard.c, since I don't have pcm-5823 with eepro board. Thanks. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479

Re: ide problem with pcm-5823

Ron, IDE problem: If this is a version -a1 or -1 pcm5823 it will not work. Only version -a2 or -2 worked. What version do you have? Can you double-check that your changes to mainboard.c for this platform were really necessary? I am not convinced. Mine is pcm-5823-e0a1. -Andrew -- Andrew

Re: [COMMIT] fixes for pcm-5823

code to write. I wouldn't mind to take it, 'coz I have sooo many irq problem lately. -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi

Re: [COMMIT] fixes for linuxbios_c.ld,vt8601,vt8231,serial post and epia

Ron, So at this point can people build working EPIA from linuxbios source tree? It can boot and no irq working yet. Pretty much the same as before except for some code fixing. can you send a sample config (or is there one in there). There is an updated version. -Andrew -- Andrew Ip Email

[COMMIT] fixes for linuxbios_c.ld,vt8601,vt8231,serial post and epia

/setup_ethernet.inc mainboard/via/epia/Config - enable ethernet before spci enum in order to get mem and io space assigned mainboard/via/epia/mainboard.c - added pci_routing_fixup superio/via/vt8231/superio.c - updated to pci direct interface -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel

Re: linux bios kernel for m758lmr+

://www.clustermatic.org/mailman/listinfo/linuxbios -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok, Kowloon, Hong Kong. Tel: (852)2542 2046 Fax: (852

generating cmos.layout

Is there any program to generate this file? Where does it come from? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel:(852) 2542 2046 Fax:(852) 2542 2036 Mobile: (852) 9201 9866 Cwlinux Limited Unit 202B 2/F Lai Cheong Factory Building, 479-479A Castle Peak Road, Lai Chi Kok

Re: VIA EPIA - Trying to get it built

/irq_tables.c? That's right. irq_tables.c and mainboard.c should be at freebios/src/mainboard/via/epia. What about your linuxbios config file? Are you using the example.config in epia's dir? Do you have mainboard and target setup right? -Andrew -- Andrew Ip Email: [EMAIL PROTECTED] Tel

  1   2   >