How to use linuxbios together with openbios? Is there
any clear howto doc? What's the main purpose of
openbios? What's the main difference between openbios
and filo?
Now I'm using filo to boot my linux kernel.
tks
zhu
__
Do you Yahoo!?
The all
Now I'm testing my i845 based MB intensively. The
box is running with linux 2.4.28, linuxbios v1 and my
port supporting i845. I have met one problem. There
is no packet on NIC after six hours rtl8139 hangup. I
can't ping other machine from linux box and can't ping
linux box from other machin
The factory bios of my MB has "power fail restore"
option and I set it to enable. The MB has the same
problem as linuxbios does. When linux is booting
without console prompt, unplug power supply and plug
again, MB will boot automatically without press power
button. But if linux has console promp
I'm using i845gv based MB. The superio is w83627hf .
I have set
MAINBOARD_POWER_ON_AFTER_POWER_FAIL=MAINBOARD_POWER_ON.Before
linux booting up, I turn off power switch, when turn
on power swith again, MB can boot again. But when I
have booted linux successfully, I can see the console
and can logi
Who know the software solution?
tks
zhu
--- Alexander Amelkin <[EMAIL PROTECTED]>
wrote:
> Hi!
>
> zss>I hope when power is on, my MB can boot
> without
> zss> press the switch. How can I do that?
>
> Browse the archive of the list for the answer.
> Keyword is M789.
>
> The main idea is t
I hope when power is on, my MB can boot without
press the switch. How can I do that?
tks
zhu
__
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
___
I hope I can read cpu temperature under linux. I know
I can read thermal sensor through smbus just like
reading spd. Who know the slave address of the sensor
and know the meaning of every byte of the sensor? Is
there any existing utility to read thermal sensor of
81801db?
tks
zhu
Now I can make intelfb work correctly. I upgrade
intelfb driver of kernel 2.4.28 to 0.7.7 I have
downloaded from author's website. It can work and
cursor there is no problem.
Linuxbios is very great work. I just grab some code
from factory's bios and set northbridge and
southbridge after the
The following are messages from linuxbios V1 vgabios
call:
**
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=8086, did=2562
rom base predefined, size: fffc
0x55 0xaa 0x5a 0xe9 0xf7 0xab 0x30 0x30 0x30 0x30 0x30
0x30 0x30 0x30 0x30 0x30 bus/devfn = 0x10
biosint: # 0x2, eax
I use intelfb in linux-2.4.27. VGA of i845 can work
correctly except that there is no cursor. So if there
is no cursor, it's almost nothing for practical usage.
Now I hope I can find some way to fix it up in
intelfb.
tks
zhu
__
Do you Yahoo!?
Now I can set sma correctly. But still can't execute
vgabios successfully. After executing testbios, the
following message prompted:
[EMAIL PROTECTED] /app]# ./testbios -s 65536 ./i845.vga
running file ./i845.vga
No base specified. defaulting to 0xc
No initial code
At last , rtl8139 work correctly.
Now I'm working on VGA(internal graphic device). I
set 0x52(graphic control register) to 0x40 to let IGD
enable and SMA size to 8M, but filo reset MB. I need
to set some other things?
tks
zhu
__
Do you Yah
rtl8139 on my i845GV MB still can't work. Who know
the meaning of post code of linux? I saw linux last
post code was 99, using vendor's bios linux last post
code was 97. I want to know the difference.
tks
zhu
__
Do you Yahoo!?
The all-new
Now I can boot my i845 MB successfully with kernel
2.4.27. please see content of /proc/pci:
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corp. 82845G/GL [Brookdale-G]
Chipset Host Bridge (rev 3)
.
Prefetchable 32 bit memory at 0xe000
[0xe3ff].
Bus 0
After working hard for three day, I have made i845gv
ddr sdram work well. I can boot linux 2.4.27 with
root filesystem on my hard disk. But linux 2.4.27
support new hardware weakly. So I hope I can boot
linux 2.6. I have before used initrd dyn invented by
l inux router project to boot linux 2.4.
Now I can pass DDR SDRAM init process. But still there
are some problem, After copying linuxbios to ram, when
jmp *%edi, MB reset.
The key point to make it pass is set Reg 0xC7 = 08,
then reset to make it effective.
If letting sdram work correctly ,it looks like some
work still to be done.
zhu
After working hard about two weeks, I can't init sdram
successfully. I'll attach the raminit.inc please help
me check what's wrong. I've contacted with intel,
they wouldn't like to provide me red book.
tks
zhu
___
Do you Yahoo!?
Declare Yourself
When p4 power up , what's the value and meaning of the
registers such as ebx, edx etc?
Who know the information, need help.
tks
zhu
__
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
_
(1)I disabled i786/earlymtrr, RAM NOP ok
(2)After executing original bios, RAM NOP couldn't
pass.
Maybe I should set mtrr correctly.
zhu
___
Do you Yahoo!?
Declare Yourself - Register online to vote today!
http://vote.yahoo.com
___
(1) The bios from original MB have to handle registers
40~4F, but I check them in i845GV datasheet, they are
all intel reserved. Where can I find information
about such intel reserved registers?
(2) what earlymtrr doing for? Is it related to ddr
sdram init?
tks
zhu
__
progress on my P4i845GV MB(845GV/82801DB/WB83627HF)
(1) setup serial correctly
(2) read spd data correctly
(3) setup DRB(?), DRA, DRT, DRC
(4) RAM_NOP hlt when launching ram read
output log :
LinuxBIOS-1.0.0 Sep 16 18:47:16 CST 2004 starting...
Ram1
dump northbridge:
00: 86 80 60 25 06 00 90 00 0
intel i845GV is very popular now. I've got P4i45GV MB
based on i845GV(northbridge:i845GV,
southbridge:82801db, superio: winfast w83627hf ). I
try to port linuxbios(v1) to this board. Today I have
built my first romimage for it. There met one problem
when using it to boot. Serial output is unread
I've got one QDIP2E MB(northbridge: Intel 82845E MCH
southbridge: Intel 82801DB ICH4 ). I hope I can make
linuxbios work on this MB. Who have done some work I
can share?
tks
zhu
__
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We f
My linuxbios (V1) can boot my linux(linux-2.4.26)
well. And I can login on serial tty. But vga can't
work. There is still one problem that reboot linux
make MB halt. When I reboot my linux, the MB halt
while bios post code equal 0x10.
tks
zhu
___
>
> For my needs initramfs is a life saver, but initrd
> is good too. Heck
> you could
> Go NFS if you wish.
>
> Enjoy,
> Dave:)
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of zhu shi song
&g
cles/14776/
>
> For my needs initramfs is a life saver, but initrd
> is good too. Heck
> you could
> Go NFS if you wish.
>
> Enjoy,
> Dave:)
>
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of zh
I now can boot my QDIA6T(vt8601/vt82c686b) MB using
hard disk as root file system though there is no vga
turned on. But I don't need HD. I hope I can mount
RAMDisk as my root filesystem which can be read and
written. How should I do to start such work? I have
read some material about initrd but
I have made my ADIA6T MB (vt8601/vt82c686B) booting
from linuxbios(freebios V1). I can't make vgabios
work in linuxbios. So I try to use testbios to make
VGA work. But testbios halt the MB. The output log
is as following:
[EMAIL PROTECTED] /sbin]# ./testbios -s 65536
./a6tvga.bios.bin
running f
My MB is A6T based on vt8601 and vt82c686. When call
vgabios(at 0xc000:0003), it halted.
...
INSTALL REAL-MODE IDT
DO THE VGA BIOS
found VGA: vid=1023, did=8500
0x55 0xAA ...(16 bytes)
bus/devfn = 0x100
biosint: # 0x1a, eax 0xb109 ebx 0x100 ecx 0x100 edx
0xb29f
biosint: ebp 0x10fd8 esp 0xfc9 edi
Dear lists,
I have two questions:
(1) I use getpir(8.30 freebios v1) to get
irq_tables.c of epia-500. I have compared mine with
one under mainboard/via/epia. They are always
different. What cause it? My irq_tables.c is as
following:
/* This file was generated by getpir.c, do not modify!
(
I can boot epia using linuxbios now. But when
executing /sbin/init linux hangs.Messages:
"Freeing unused kernel memory: 248k freed
Warning: unable to open an initial console.
"
what's the problem?
zhu
___
Do you Yahoo!?
Win 1 of 4,000 free domain name
Q1:
(1)freebios v1
(2)MB: epia
(3)Kernel: 2.4.26
(4)I try to turn vga on following the steps in EPIA
howto. But MB halt on executing vgainit.inc.
Q2:
(1)freebios V2
(2)MB: epia
(3)kernel: 2.4.26
(4)I can boot filo from IDE CF, when jump to linux, I
can't see any messages from vga or serial.
(5)ke
(1)kernel: linux-2.4.26
(2)freebios2: latest(08/23)cvs freebios2
(3)there is no any vga handle of via epia under
freebios2
zhu
--- ron minnich <[EMAIL PROTECTED]> wrote:
> what version kernel? 2.6. now has a nice feature,
> early serial console
> output, useful for debug.
>
> ron
>
>
I have boot my epia board successfully using V2
Linuxbios. I can see filo loading linux kernel to
boot..But there are some problems:
(1)keyboard fail
(2)vga fail
(3)my kernel boot fail, I can't see any prompt message
from serial. How can I configure my kernel to support
serial output?
tks
zhu
DOC MIL has expired. Now I have bought one
doc2000(partno:MD2202-D16). How can I upgrade my DOC
MIL ipl for sis630 to DOC2000?
tks
zhu
__
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.co
?
tks
zhu
--- Stefan Reinauer <[EMAIL PROTECTED]> wrote:
> * zhu shi song <[EMAIL PROTECTED]> [040819
> 15:42]:
> > I'm using QDIA6T MB based on vt8601/vt82c686. Now
> I
> > can boot it using DOC IPL. I can copy linuxbios
> from
> > DOC to
I'm using QDIA6T MB based on vt8601/vt82c686. Now I
can boot it using DOC IPL. I can copy linuxbios from
DOC to RAM at 0x8000:0. But when linuxbios executed
"data32 ljmp$ROM_CODE_SEG, $__protected_start"
statement. The MB halted. help!
zhu
___
Dear lists,
When I run buildtarget via/epia, there are some
errors:
build_dir=via/epia/epia
File "via/epia/epia/config.py", line 543
self.set |= 2
^
SyntaxError: invalid syntax
My python version is 1.5.2.
tks
zhu
__
Do y
onous mode of SDRAM. I think
synchronous mode means FSB is equal to SDRAM clock.
My SDRAM is 100Mhz. So I must set MB FSB to 100Mhz.
The default FSB of the MB on powering is 66Mhz.
tks
zhu
--- ron minnich <[EMAIL PROTECTED]> wrote:
> On Tue, 10 Aug 2004, zhu shi song wrote:
>
Hi,
(1)A6T MB is based on via chipset vt8601/686b
(2)IPL can successfully copy linuxbios into
0x8000:(I have read them out to test this point)
(3)The first line of linuxbios is to output %al to
port 0x80
(4)When IPL jumped to 0x8000:, the first line of
linuxbios couldn't be execute
Dear lists,
flasn_on utility is just for sis630 chipset. Is
there any similar utility for via 8601/686b chipset?
tks
zhu
__
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
Dear lists,
who knows how to setup FSB of winfast6300? I need
linuxbios to support > 733M celeron.
tks
zhu
__
Do you Yahoo!?
New and Improved Yahoo! Mail - 100MB free storage!
http://promotions.yahoo.com/new_mail
Sir,
(1) On my sis630et board P6STMT, bios value of 0x8E is 00
(2) if I set 0x8E to 00 in IPL, ipl hangs on using stack to read linuxbios from DOC to ram
(3) if I set 0x8E to 03 in IPL, linuxbios can start linux image successfully, but linux hangs at random time.
(4) conclusion
IPL init SDRAM h
Hi, lists,
I've got one ECS p6stmt motherboard based on sis630et. I have dumped pci host bridge settings:
P6STMT00:00.0 Host bridge: Silicon Integrated Systems: Unknown device 0630 (rev 30)00: 39 10 30 06 07 00 10 22 30 00 00 06 00 20 80 0010: 00 00 00 d8 00 00 00 00 00 00 00 00 00 00 00 0020: 0
I have met two problems when using V1 linuxbios for winfast 6300.
(1) For winfast 6300, it is not compatible with some SDRAM.
(2) For ECS P6STMT board which uses sis630et chipset, IPL hangs when ipl use stack to read Linuxbios from DOC.
The two problems are all related to memory init. Maybe the
(1) ECS P6stmt board use SDRAM synchronous mode.
I've got P6STMT motherboard based on sis630et. It's strange that the 0x8e is equal 0 which I have read from linux running on the board, that means the board uses SDRAM synchronous mode.
(2) The board halt after setting 0x8c~8f value same as bi
The only difference between ecs p6stmt MB and winfast6300 is that they use the different sis chipset. P6stmt use sis630ET, winfast6300 use sis630. So Doc2001 which can work on winfast6300 can't work on P6stmt. Is it right?
thanks
zhu
Do you Yahoo!?
Vote for the stars of Yahoo!
I've got elitegroup MB P6STMT based sis630e. It's hard for me to setup the correct value of dll.inc(0x8c~0x8f).
(1) I copy the value from winfast6300. My Doc2001 can boot but linux kernel will hangup.
(2) I copy the value from pcchips/m787cl+. MB halt.
(3) I copy the value from elitegroup/p6st
I've got two kind of sis630e motherboard, one is winfast 6300 Max pro, the other is from ellite group.
(1) for winfast 6300
I've burned one DOC2001 to boot it, for some SDRAM it works well, for some other SDRAM it can't boot, it hangup on jmp spl_vector(after my debug testing ).
(2) for ell
I find winfast 6300 Max pro using Sis630e chipset. The problem of reading spd RAM type byte is also return 01 or 00 for different SDRAM but no 04. Is it a problem?
thanks
zhu
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
Dear sir,
I've got one mainboard named A6T. A6T uses the same VIA northbridge and southbridge as vt5426. I boot linux from the mainboard and insert doc2001 in the BIOS slot. Then run the following commands:
insmod docecc
insmod doc2001
insmod docprobe
these commands can detect doc20
(1) RAM type sis630 IPL.S read is not 04
I debug sis630 IPL.S, I find the RAM type value that IPL read is 01 or 00 for different RAM but not 04. But my RAM is definitely SDRAM. The code is:
...
movb $0x02, %al # Read the RAM Type (SPD byte 2) CALL_SP(read_spd) # of the dram on current
I need to know the value of spd byte from linux. Is there any linux utility to read spd bytes?
tks
zhu
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
I've got QDIA6T mainboard see http://www.qdigrp.com. It use via 8601t and 686b. I try to boot it using vt5426 mainboard in freebios V1. After testing, ipl.S will loop forever in the following code(in src/northbridge/via/8601/ipl.S):
wait_for_flash_ready: /* delay by reding
dear sir,
I've got one mainboard. Its northbridge is vt8601t, southbridge is 82c686b. I checked freebios source , there exists mainboard vt5426 which is very near my configuration. the northbridge and southbridge of vt5426 are seperately vt8601 and 82c686. Who know the difference between t
evoc mainboard specififaction:
on-board NS GX1 233Mhz(fanless)
NS CS5530A
winbond83977f
realtek rtl8139C
attached file is linux kern boot mesgs.
"Ronald G. Minnich" <[EMAIL PROTECTED]> wrote:
On Wed, 26 Feb 2003, zhu shi song wrote:> > usb's irq is still in
usb's irq is still incorrect. under normal linux, usb's irq is 15, but under linuxbios the irq is 10. so usb can't work correctly.
what's the correct step to run getpir? what's the rule for linux kernel to assign pci irq according to irq routing table?
thanks
zhu s
sorry, check sum should be 0xf0. NIC is ok. but usb's irq is not correct.
zhu shi song <[EMAIL PROTECTED]> wrote:
yes, irq_tables.c is:
/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing T
yes, irq_tables.c is:
/* This file was generated by getpir.c, do not modify! (but if you do, please run checkpir on it to verify) Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM*/
#includ
no any progress. linux can't assign pci irq. what's wrong?
Andrew Ip <[EMAIL PROTECTED]> wrote:
> yes , CONFIG_COMPRESS=0 > but it seems there is no effect, should i set kernel pci access mode to any or direct?PCI access mode has to be direct.-Andrew-- Andrew IpEmail: [EMAIL PROTECTED]Tel: (852)
yes , CONFIG_COMPRESS=0 but it seems there is no effect, should i set kernel pci access mode to any or direct?
"Ronald G. Minnich" <[EMAIL PROTECTED]> wrote:
On Tue, 25 Feb 2003, zhu shi song wrote:> > for mainboards that can't copy irq_routing_table to 0xf, what
for mainboards that can't copy irq_routing_table to 0xf, what should we do to let linux setup irq of pci device correctly?
"Ronald G. Minnich" <[EMAIL PROTECTED]> wrote:
On Tue, 25 Feb 2003, zhu shi song wrote:> can you copy irq_tables to 0xf on your mainb
can you copy irq_tables to 0xf on your mainboard?
thanksDo you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more
now i can boot my ec3 mainboard, but linuxbios can only find 32M ram, but I have 256M RAM. do you meet such problem?
ec3 mainboard specification:
processor: on-board NS GX1 233MHZ(fanless)
chipset: NS CS5530A
System Memory: one SDRAM DIMM
BIOS: 2Mbit Flash BIOS
solid state disk: support diskonchip
I'm using ec3 mainboard, it just like advantech pcm-5823, except ec3 use winbond 83977f as superio. the config file of the ec3 mainboard is as follows:
# Copyright (c) 2002 Christer Weinigel <[EMAIL PROTECTED]>
# This is a config file for the evoc ec3 mainboard
# The board is a National Semicon
I'm using ec3 mainboard, it just like advantech pcm-5823, except ec3 use winbond 83977f as superio. the config file of the ec3 mainboard is as follows:
# Copyright (c) 2002 Christer Weinigel <[EMAIL PROTECTED]>
# This is a config file for the evoc ec3 mainboard
# The board is a National Semicon
linuxbios can support pcm-5823, but it needs etherboot. can pcm-5823 boot linux from doc embedded in the board directly?
zhu
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
how to build linuxbios rom images( for 256 flash ) which can boot linux from hda? I need the info about the tools we need and the steps we should follow.
thanks
zhu
Do you Yahoo!?
Yahoo! Shopping - Send Flowers for Valentine's Day
meone who has the experience using
md2802-d08.
thanks
zhu shi song
__
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
___
Linuxbios mailing list
[
linuxbios now can't support 100MHz FSB of winfast6300.
Who can solve the problem or give clear clues to solve
it? So linuxbios can support 850MHz celeron.
thanks
zhu
__
Do you Yahoo!?
U2 on LAUNCH - Exclusive greatest hits videos
http://la
ECTED]> wrote:
> On Tue, 2002-11-05 at 13:33, zhu shi song wrote:
> > I got setclock from old mailing lists. Can you
> give
> > more comments on the program? If I'll use it to
> boot
> > 850Mhz celeron, what should i do ?
> >zhu
>
> You can't
I got setclock from old mailing lists. Can you give
more comments on the program? If I'll use it to boot
850Mhz celeron, what should i do ?
zhu
--- ollie lho <[EMAIL PROTECTED]> wrote:
> On Tue, 2002-11-05 at 02:28, Ronald G. Minnich
> wrote:
> > On 4 Nov 2002, James Alton wrote:
> >
> > > I
--- ollie lho <[EMAIL PROTECTED]> wrote:
> On Sun, 2002-11-03 at 21:52, zhu shi song wrote:
> > Hi,
> > I'm using freebios-cvs , linux-kernel 2.4.18,
> > mainboard winfast6300, When I use celeron 766,
> linux
> > booted by linuxbios can identify it cor
Hi, everyone,
I met one problem, linuxbios can't identify celeron
850Mhz.
i'm using linux-kernel 2.4.18, cvs-freebios,
winfast6300.
when using linuxbios boot, linux can't identify
celeron
850MHz, it shows the cpu is at 560MHz.
when using normal bios boot, linux can identify
celeron
850MHz, it sho
Hi, everyone,
I met one problem, linuxbios can't identify celeron
850Mhz.
i'm using linux-kernel 2.4.18, cvs-freebios,
winfast6300.
when using linuxbios boot, linux can't identify
celeron
850MHz, it shows the cpu is at 560MHz.
when using normal bios boot, linux can identify
celeron
850MHz, it sho
Hi,
I'm using freebios-cvs , linux-kernel 2.4.18,
mainboard winfast6300, When I use celeron 766, linux
booted by linuxbios can identify it correctly, but
when
I change cpu to celeron 850, linux can't identify it,
dmsg info show the cpu is 560Mhz. what's the problem,
please help me.
tha
And also I have tested different packet size , I found odd len packet can't response, even can. for example:
ping -s 122 192.12.11.1 0% lost
ping -s 123 192.12.11.1 100% lost
thanks
zhu
ollie lho <[EMAIL PROTECTED]> wrote:
On Mon, 2002-10-14 at 22:30, zhu shi song wrote:
ollie lho <[EMAIL PROTECTED]> wrote:
On Mon, 2002-10-14 at 22:30, zhu shi song wrote:> I met one strange error on sis900 ethernet driver. > I'm using cvs freebios on 6 Oct, 2002 , kernel 2.4.17,> mainboard is winfast6300. After booting using> linuxbios stored in DOC, I boot &g
I met one strange error on sis900 ethernet driver.
I'm using cvs freebios on 6 Oct, 2002 , kernel 2.4.17,
mainboard is winfast6300. After booting using
linuxbios stored in DOC, I boot
my host linux system using normal bios. the host
linux
is the same system as in DOC. I test pings, the
result
I met one strange error on sis900 ethernet driver.
I'm using cvs freebios on 6 Oct, 2002 , kernel 2.4.17,
mainboard is winfast6300. After booting using
linuxbios stored in DOC, I boot
my host linux system using normal bios. the host
linux
is the same system as in DOC. I test pings, the
result
I compile acpi into the kernel. When the kernel
booting,
through doc , acpi error. When I boot it from bios ,
it's ok.
I'm using cvs freebios, linux-2.4.18.
who met the problem?
thanks
zhu
__
Do you Yahoo!?
Faith Hill - Exclusive Per
all is ok. thanks to andrew ip.
btw, now i am using initrd_dyn to boot linux from DOC.
I have checked the patch, the most recent patch is
for kernel-2.4.18. I haven't got for kernel-2.4.19.
Do you hear about it? or if I want to use 2.4.19, can
you give me some suggestions?
Also , i hope you
I'm using cvs freebios , kernel 2.4.18 and winfast6300
mainboard. All is ok , but kernel can't find keyboard
and prompted keyboard timeout. what't the problem?
I hope someone can help me.
thanks
zhu
__
Do you Yahoo!?
Faith Hill - Exc
I am using cvs freeebios , linux kernel 2.4.18 and
winfast6300 mainborad. All is Ok, but linux kernel
can't find keyboard. it said keyboad timeout.
what's the problem? I hope I can get your help.
thanks
zhu
__
Do you Yahoo!?
Faith Hill - Exclu
I'm using cvs freebios, and intel celeron CPU and
winfast 6300 mainboard. When linuxbios post 0x60 and
go to execute set fixed mtrr, it halt. The output is
as following:
Setting up fixed MTRRs(0-88) type:UC
Setting fixed MTRRS(
who know the problem?
thanks
___
85 matches
Mail list logo