On Apr 21, 2005, at 6:46 PM, beneo wrote:
I used a command like this to make the elf image.
mkelfImage --command-line=root=/dev/hda2 rw console=ttyS0,115200n8 \
--kernel=/boot/vmlinuz-2.4.20-8smp
--ramdisk=/boot/initrd-2.4.20-8smp.img \
--output=/root/elf/linuxImage
I think my root
what version of python do you have on your machine? what distro is this?
ron
___
Linuxbios mailing list
Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
I strongly recommend filo for people trying to boot off ide. It just plain
works for me and etherboot, though it is wonderful, has not been as
reliable.
ron
___
Linuxbios mailing list
Linuxbios@clustermatic.org
On Fri, Apr 22, 2005 at 01:58:31PM -0700, beneo wrote:
Does filo support ext3 file system? the intruduction say it
supports ext2, but didn't say anything about ext3. If it doesn't
support ext3, does it mean I have to re-install Linux to ext2?
On Fri, Apr 22, 2005 at 04:09:53PM -0600, Ronald G.
On Fri, 22 Apr 2005, beneo wrote:
Does filo support ext3 file system? the intruduction say it supports ext2,
but didn't say anything about ext3. If it doesn't support ext3, does it mean
I have to re-install Linux to ext2?
IIRC read-only ext3 can almost always be read by ext2 file system
On Fri, Apr 22, 2005 at 10:51:37AM -0700, Nathanael D. Noblet wrote:
If you ask me, you have two possible problems.
1) LinuxBIOS isn't setting up the IDE controller properly so that
your kernel can't find it
I agree.
or
2) Something in the moving the kernel and initrd to the tftp
Thanks guys for all the recommandations. I will try them and let you guys
know.
Does filo support ext3 file system? the intruduction say it supports ext2,
but didn't say anything about ext3. If it doesn't support ext3, does it mean
I have to re-install Linux to ext2?
Another question I have is
On Apr 22, 2005, at 11:05 AM, beneo wrote:
Below is the dump from Console, starting from LinuxBIOS to Kenel
Panic, If
you see anything strange, please let me know.
It seems good to me. Here is where my lack of knowledge tells me to
stick with what I know. I don't know how the initrd is
AMD8111: IDE controller at PCI slot 01:04.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: neither IDE port enabled (BIOS)
So you need to add two lines in the MB Config.lb
device pci 1.6 off end
+
On Apr 22, 2005, at 9:53 AM, Peter Stuge wrote:
On Fri, Apr 22, 2005 at 09:23:40AM -0700, Nathanael Noblet wrote:
I would suggest skipping the netboot portion and use FILO. It will
load a kernel directly from the filesystem, if you are planning on
using that as that root system, no point in
I changed the Config.lb as YhLu recommanded and payload to filo, after some
struggle, I finally can boot Linux!!! Thanks!
However, my ethernet connection with LinuxBIOS are still no good. I get a
msg like this during boot:
Applying iptables firewall rules: [ OK ]
Setting network
On Fri, 2005-04-22 at 10:40, beneo wrote:
Thanks Peter and Nathanale for your reply. I will try the things you guys
listed in the email and let you know.
I have one more question on the comment Peter made,
Peter Wrote:
Indeed, this is another option. But a new kernel is still neccessary
On Thu, Apr 21, 2005 at 06:46:51PM -0700, beneo wrote:
Then my trouble starts, every time I get a Linux Kernel Panic
during the boot. The message is like this.
Loading ext3.o module
Mounting /proc filesystem
Creating block devices
kmod: failed to exec /sbin/modprobe -s -k
Try turning the device on too:
device pci 1.6 on end
-Original Message-
From: YhLu [mailto:[EMAIL PROTECTED]
Sent: Friday, April 22, 2005 3:26 PM
To: Nathanael Noblet; beneo
Cc: LinuxBIOS
Subject: RE: Booting Linux using netboot and HD
AMD8111: IDE controller at PCI slot 01:04.1
Thanks Peter and Nathanale for your reply. I will try the things you guys
listed in the email and let you know.
I have one more question on the comment Peter made,
Peter Wrote:
Indeed, this is another option. But a new kernel is still neccessary
since the one in the ELF image
Below is the dump from Console, starting from LinuxBIOS to Kenel Panic, If
you see anything strange, please let me know.
Beneo
LinuxBIOS-1.1.7.0-Fallback Wed Mar 30 12:47:29 PST 2005 starting...
ht reset -
LinuxBIOS-1.1.7.0-Fallback Wed Mar 30 12:47:29 PST 2005 starting...
16 matches
Mail list logo