This adds the definition of the on-chip OHCI controller to the
Bamboo board's device-tree. This is enough to get it probed and
working, though a separate patch fixing a bug in the OHCI driver
is needed to make it reliable.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerp
This adds the device-tree bits & call to ppc4xx_pci_find_bridges()
to make PCI work on the Bamboo board
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/bamboo.dts | 40 ++-
1 file changed, 39 insertions(+), 1 deletion(-)
From: Hugh Blemings <[EMAIL PROTECTED]>
This patch adds base support for the AMCC Taishan 440GX evaluation
board.
Signed-off-by: Hugh Blemings <[EMAIL PROTECTED]>
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/Kconfig.debug |6
arch/powerpc/boot/Make
This wires up the 4xx PCI support & device-tree bits for the
405GP based Walnut platform.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
This one is untested, haven't had time to dig my walnut and put it
back into working condition. Josh, can you verify that IRQs are
working (routi
Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD
comes from a device-tree property, PCI is working to the point where
I can see the video card, USB device, and south bridge.
This should work with both EP405 and EP405PC.
I've not totally figured out how IRQs are wired on this har
This adds some basic real mode based early udbg support for 40x
in order to debug things more easily
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/Kconfig.debug | 13 +++
arch/powerpc/kernel/misc_32.S | 39
This wires up the 4xx PCI support & device tree bits for
440GP based Ebony platform.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
arch/powerpc/boot/dts/ebony.dts | 41 +++-
1 file changed, 36 insertions(+), 5 deletions(-)
--- linux-work.ori
This adds to the previous 2 patches the support for the 4xx PCI Express
cells as found in the 440SPe revA, revB and 405EX.
Unfortunately, due to significant differences between these, and other
interesting "features" of those pieces of HW, the code isn't as simple
as it is for PCI and PCI-X and so
This adds to the previous patch the support for the 4xx PCI 2.x
bridges.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
This version implement the basic support for the 405GP bridge,
I haven't yet looked at differences that other implementations
may have for the PCI 2.x part.
arc
This adds base support code for the 4xx PCI-X bridge. It also provides
placeholders for the PCI and PCI-E version but they aren't supported
with this patch.
The bridges are configured based on device-tree properties.
Signed-off-by: Benjamin Herrenschmidt <[EMAIL PROTECTED]>
---
Tested on 440GP o
Accessing indirect DCRs is done via a pair of address/data DCRs.
Such accesses are thus inherently racy, vs. interrupts, preemption
and possibly SMP if 4xx SMP cores are ever used.
This updates the mfdcri/mtdcri macros in dcr-native.h (which were
so far unused) to use a spinlock.
In addition, ad
This adds a cputable function pointer for the CPU-side machine
check handling. The semantic is still the same as the old one,
the one in ppc_md. overrides the one in cputable, though
ultimately we'll want to change that so the CPU gets first.
This removes CONFIG_440A which was a problem for multip
On Thu, Dec 06, 2007 at 02:48:18PM +1100, Michael Ellerman wrote:
> igoeast:~# cd /sys/class/net/eth1/
> igoeast:/sys/class/net/eth1# ls -la
> total 0
> drwxr-xr-x 4 root root0 Dec 6 10:22 .
> drwxr-xr-x 6 root root0 Dec 6 10:21 ..
> -r--r--r-- 1 root root 4096 Dec 6 10:30 addr_len
>
On Wed, Dec 12, 2007 at 10:56:33AM +1100, Stephen Rothwell wrote:
>
> Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
> ---
> drivers/base/driver.c | 24
> drivers/net/iseries_veth.c | 15 +++
> include/linux/device.h |3 +++
> 3 files cha
On Wed, 2007-12-12 at 17:53 +0100, Thomas Klein wrote:
> This patch adds kdump support using the new PPC crash shutdown hook to the
> ehea driver. The driver now keeps a list of firmware handles which have to
> be freed in case of a crash. The crash handler does the minimum required: it
> frees the
On Wed, 2007-12-12 at 12:04 -0500, Dave Jones wrote:
> On Wed, Dec 12, 2007 at 05:53:43PM +0100, Thomas Klein wrote:
>
> > +static void ehea_update_adapter_handles(struct ehea_adapter *adapter)
> > +{
> > + int i, k;
> > + int j = 0;
> > +
> > + memset(adapter->res_handles, sizeof(adapter
Currently the sleep code on the old powerbook 3400 does an ioremap and
a kmalloc on each sleep/wakeup cycle. This moves the ioremap and
kmalloc to boot-time code (via_pmu_start) so that they only need to be
done once. This will be more convenient when we change to using the
generic suspend code,
On Wed, Dec 12, 2007 at 11:12:24PM -0600, Olof Johansson wrote:
> Hi,
> > + __delay(SETJMP_MACHINE_CHECK_DELAY);
>
> Where is this defined?
Oops, nevermind. In 1/2, of course. :-)
-Olof
___
Linuxppc-dev mailing list
Linuxppc-dev@ozl
Hi,
On Thu, Dec 13, 2007 at 02:16:18PM +1100, Michael Neuling wrote:
> Index: clone3/arch/powerpc/kernel/crash.c
> ===
> --- clone3.orig/arch/powerpc/kernel/crash.c
> +++ clone3/arch/powerpc/kernel/crash.c
> @@ -32,6 +32,8 @@
> #inc
This is fairly straightforward, and lets us get rid of x.completion
as well.
Signed-off-by: Paul Mackerras <[EMAIL PROTECTED]>
---
diff --git a/drivers/macintosh/therm_windtunnel.c
b/drivers/macintosh/therm_windtunnel.c
index 5452da1..3722402 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++
This converts the therm_pm72.c driver to use the kthread API. I
thought about making it use kthread_stop() instead of the `state'
variable and the `ctrl_complete' completion, but that isn't simple and
will require changing the way that `state' is used.
Signed-off-by: Paul Mackerras <[EMAIL PROTEC
This converts adb.c to use the kthread API.
It also changes adb_request so that if the ADBREQ_SYNC flag is
specified, we now sleep waiting for the request to finish using an
on-stack completion rather than spinning. To implement this, we now
require that if the ADBREQ_SYNC flag is set, the `done'
We aren't supposed to use kernel_thread directly in drivers any more,
and in fact using kthread_run is a bit simpler.
Signed-off-by: Paul Mackerras <[EMAIL PROTECTED]>
---
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 48d647a..080844b 100644
--- a/drivers/macintosh
Hi,
Can some one point me to an URL or some thing that explains how exactly
the characters from printf in user program gets printed on to the
console. Some thing like "it goes to /dev/console, and kernel reads from
." would be great, so that I can trace it out.
Is there any way, we can
This adds hooks into the default_machine_crash_shutdown so drivers can
register a function to be run in the first kernel before we hand off
to the second kernel. This should only be used in exceptional
circumstances, like where the device can't be reset in the second
kernel alone (as is the case w
This makes the setjmp/longjmp code used by xmon, generically available
to other code. It also removes the requirement for debugger hooks to
be only called on 0x300 (data storage) exception and adds some
documentation.
Signed-off-by: Michael Neuling <[EMAIL PROTECTED]>
---
arch/powerpc/kernel/mi
The following patches add crashdump shutdown hooks for POWERPC.
Signed-off-by: Michael Neuling <[EMAIL PROTECTED]>
---
This is an updated series following comments from the first post.
Adds some documentation, better code flow, fixes 32 bit compiles and
other updates based on feedback
Again these
On Mon, 2007-12-10 at 23:47 +0300, Anton Vorontsov wrote:
> Hi all,
>
> Here are patches to support NAND on UPM. That driver is generic for
> all processors with FSL UPMs. And because of that, few more patches are
> needed -- GPIO API and generic FSL UPM functions.
> I would appreciate any comment
Thanks for the response Michael.
Yes!... I do have /dev/console
I also have the following line in /etc/inittab (::respawn:/sbin/getty -L
ttyS0 115200 VT100)
Still it does not print any thing from the user land. All the kernel
printk's are working fine.
I tried to print the arguments and enviro
> This stray down would cause a permanent sleep which doesn't seem correct.
> The other uses of this semaphore appear fairly mutex like it's even
> initialized
> with init_MUTEX() .. So here a patch for removing this one down().
>
> Signed-off-by: Daniel Walker <[EMAIL PROTECTED]>
>
> ---
> d
On Wed, Dec 12, 2007 at 11:16:33PM +0100, Arnd Bergmann wrote:
> On Wednesday 12 December 2007, Jochen Friedrich wrote:
>
> > +static spinlock_t *cpm1_port_locks;
> > +static int cpm1_num_ports;
>
> Having an array of spinlocks is rather unusual and normally not necessary.
> Did you measure a sig
On Wed, 12 Dec 2007 16:48:24 -0600 Scott Wood <[EMAIL PROTECTED]> wrote:
>
> Stephen Rothwell wrote:
> >> + ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
> >
> > of_node_put(ep8248e_bcsr_node;
>
> No, because we hold on to the node for later use in ep8248e_mdio_probe().
Sorry, you are right, I
>
> > + if (setjmp(crash_shutdown_buf) == 0) {
> > + asm volatile("sync; isync");
> > + crash_shutdown_handles[i]();
> > + asm volatile("sync; isync");
> > + __delay(200);
>
> This looks a bit random. Why the handc
This stray down would cause a permanent sleep which doesn't seem correct.
The other uses of this semaphore appear fairly mutex like it's even initialized
with init_MUTEX() .. So here a patch for removing this one down().
Signed-off-by: Daniel Walker <[EMAIL PROTECTED]>
---
drivers/ps3/ps3-vuar
Hi Scott,
On Wed, 12 Dec 2007 11:36:04 -0600 Scott Wood <[EMAIL PROTECTED]> wrote:
>
> +static int __devinit gtm_probe(struct of_device *dev,
> + const struct of_device_id *match)
> +{
.
.
.
> +out:
Just for consistency, you probably want
In message <[EMAIL PROTECTED]> you wrote:
>
> --=-Kza0KCx0MG8nsjfq7kOz
> Content-Type: text/plain
> Content-Transfer-Encoding: quoted-printable
>
> On Wed, 2007-12-12 at 16:45 +1100, Michael Neuling wrote:
> > This adds hooks into the default_machine_crash_shutdown so drivers can
> > register a
> > arch/powerpc/xmon/setjmp.S| 135
> > --
> > +#ifdef CONFIG_XMON
> > +/*
> > + * Grab the register values as they are now.
> > + * This won't do a particularily good job because we really
> > + * want our caller's caller's registers, and our cal
On Thu, 2007-12-13 at 09:51 +1100, Michael Ellerman wrote:
> On Wed, 2007-12-12 at 01:23 -0600, Olof Johansson wrote:
>
> Patch looks good otherwise.
By which I mean:
Acked-by: Michael Ellerman <[EMAIL PROTECTED]>
This patch is double-plus-good!
cheers
--
Michael Ellerman
OzLabs, IBM Austral
On Wed, 2007-12-12 at 16:45 +1100, Michael Neuling wrote:
> This adds hooks into the default_machine_crash_shutdown so drivers can
> register a function to be run in the first kernel before we hand off
> to the second kernel. This should only be used in exceptional
> circumstances, like where the
Hi Scott,
Just one little nit ...
On Wed, 12 Dec 2007 11:36:01 -0600 Scott Wood <[EMAIL PROTECTED]> wrote:
>
> - ret = platform_device_add_data(dev, freq, sizeof(int));
> + ret = platform_device_add_data(dev, &freq, sizeof(int));
^
On Wed, 2007-12-12 at 16:45 +1100, Michael Neuling wrote:
> This makes the setjmp/longjmp code used by xmon, generically available
> to other code. It also removes the requirement for debugger hooks to
> be only called on 0x300 (data storage) exception.
>
> Signed-off-by: Michael Neuling <[EMAIL
This board is also resold by Freescale under the names
"QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE".
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/boot/Makefile |3 +-
arch/powerpc/boot/dts/ep8248e.dts | 193 +++
arch/powerpc/boot/ep8248
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/cpm2_common.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/cpm2_common.c
b/arch/powerpc/sysdev/cpm2_common.c
index 859362f..c1d8240 100644
--- a/arch/powerpc/sysdev/cpm2_common.
On Wed, 2007-12-12 at 01:23 -0600, Olof Johansson wrote:
> On Wed, Dec 12, 2007 at 05:49:39PM +1100, Michael Ellerman wrote:
> > Before the ugliness spreads .. I'm pretty sure we can get this from the
> > chip_data of the virq - I haven't fixed it though because I wasn't sure
> > if using chip_data
Stephen Rothwell wrote:
>> +ep8248e_bcsr = of_iomap(ep8248e_bcsr_node, 0);
>
> of_node_put(ep8248e_bcsr_node;
No, because we hold on to the node for later use in ep8248e_mdio_probe().
BTW, is there any actual node removal done that justifies dealing with
refcounts everywhere?
-Scot
___
Basic PM support for 83xx. Standby is implemented as sleep.
Suspend-to-RAM is implemented as "deep sleep" (with the processor
turned off) on 831x.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
The enabling of i-cache at the end of the suspend code somehow fell off of
the code that was sent ou
On Wednesday 12 December 2007, Jochen Friedrich wrote:
> +static spinlock_t *cpm1_port_locks;
> +static int cpm1_num_ports;
Having an array of spinlocks is rather unusual and normally not necessary.
Did you measure a significant performance impact by using a global lock
for all ports?
If not, I
On Friday 07 December 2007, Timur Tabi wrote:
> Define the layout of a binary blob that contains a QE firmware and
> instructions
> on how to upload it. Add function qe_upload_firmware() to parse the blob
> and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to
> include the a
Hi Paul,
This one seems to have got skipped:
http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046765.html
-Geoff
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Scott Wood wrote:
> Anton Vorontsov wrote:
>> As the compromise I might suggest this: forbid pattern_start/pattern_end
>> from the ISRs (by marking them as might_sleep()), and replace _irqsave
>> spinlock with simple spinlock.
>
> No, you cannot use a bare spinlock with IRQs enabled. You'll deadl
Anton Vorontsov wrote:
> As the compromise I might suggest this: forbid pattern_start/pattern_end
> from the ISRs (by marking them as might_sleep()), and replace _irqsave
> spinlock with simple spinlock.
No, you cannot use a bare spinlock with IRQs enabled. You'll deadlock
on SMP, and you'll hav
On Wed, Dec 12, 2007 at 10:54:29AM -0600, Scott Wood wrote:
> Anton Vorontsov wrote:
> >On Wed, Dec 12, 2007 at 10:40:35AM -0600, Scott Wood wrote:
> >>Not enough to be worth the complexity compared to the overhead of NAND
> >>access -- especially in the likely case of a non-SMP build.
> >
> >I'm a
thanks, applied.
With your next batch of patches for 2.6.25, could you clean up:
> --- a/drivers/infiniband/hw/ehca/hcp_if.c
> +++ b/drivers/infiniband/hw/ehca/hcp_if.c
> @@ -89,6 +89,7 @@
> #define HCALL9_REGS_FORMAT HCALL7_REGS_FORMAT " r11=%lx r12=%lx"
>
> static DEFINE_SPINLOCK(hcal
thanks, applied.
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
> What is the fix you suggest, to add a device query that tells you for
> which verbs the documentation does not apply? or enhance the code of the
> map_phys_fmr verb within the ehca driver to return error if called
> from non-sleepable context?
I think the right fix for iSER would be to
On Wed, 2007-12-12 at 13:45 +1100, Benjamin Herrenschmidt wrote:
> I only just noticed a huge regression that was introduced when we moved
> PowerPC to the generic APM emulation code instead of our own. I'm in
> large part to blame since I acked the patch...
>
> Basically, what we lost is the mec
Joachim Fenkes wrote:
> Roland Dreier <[EMAIL PROTECTED]> wrote on 10.12.2007 22:47:37:
>> It's an optional device feature, so this should be OK
>> (although the iSER driver currently seems to depend on a device
>> supporting FMRs, which is probably going to be a problem with iWARP
>> support in t
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
Jeff, can you ack this to go through Paul's tree
(assuming nothing wrong with it)?
drivers/net/gianfar.c | 137 -
drivers/net/gianfar.h | 13 +++-
drivers/net/gianfar_ethtool.c | 41
Basic PM support for 83xx. Standby is implemented as sleep.
Suspend-to-RAM is implemented as "deep sleep" (with the processor
turned off) on 831x.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/83xx/Kconfig |5 +
arch/powerpc/platforms/83xx/Makefile |
The magic packet flag indicates that the hardware has this
capability. The MDIO flag indicates that this device's
registers contain active MDIO registers, and thus this
device should not be put to sleep.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c |7 +
This is a driver for the mpc83xx's GTM4 timer. It's functionality
is limited to providing a wakeup source for suspend-to-RAM.
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/83xx/Kconfig |9 +
arch/powerpc/platforms/83xx/Makefile |1 +
arch/powerpc/platforms/83x
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/fsl_soc.c | 44 ++--
arch/powerpc/sysdev/fsl_soc.h |1 +
2 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
in
Signed-off-by: Scott Wood <[EMAIL PROTECTED]>
---
arch/powerpc/sysdev/6xx-suspend.S | 52 +
arch/powerpc/sysdev/Makefile |4 +++
include/asm-powerpc/mpc6xx.h |6
3 files changed, 62 insertions(+), 0 deletions(-)
create mode 100644 arch/
The e300 core (and probably most other 6xx chips) can only come out of
sleep mode with an interrupt. However, interrupts are logically disabled
by the power management layer.
This hack extends the existing doze/nap hack to also suppress the running
of the interrupt handler when in sleep mode.
Si
Hi,
> bizarre. It should default back to whatever CONFIG_CPU_FREQ_DEFAULT_* option
> was set. (Arguably a bug in itself, as we don't track & restore them
> on resume, so if you changed from the default after booting: splat)
Hah ok, but it's still odd that it changes to a different one.
> Why yo
These hooks ensure that a decrementer interrupt is not pending when
suspending; otherwise, problems may occur. For example, with deep sleep
on the 831x, a pending decrementer will cause a system freeze because the
SoC thinks the decrementer interrupt would have woken the system, but the
core must
On Tue, Dec 11, 2007 at 07:52:45PM +0100, Johannes Berg wrote:
> Hi,
>
> No idea who to bother with this and maybe it's just a
> misconfiguration... Apologies if my guesses are totally wrong.
>
> I'm currently on 2.6.24-rc3 (+wireless-2.6#everything) but couldn't find
> any patches between
Hi,
No idea who to bother with this and maybe it's just a
misconfiguration... Apologies if my guesses are totally wrong.
I'm currently on 2.6.24-rc3 (+wireless-2.6#everything) but couldn't find
any patches between that and 2.6.24-rc5 that seemed relevant.
On my quad powermac, I'm seeing the cpuf
On Wed, Dec 12, 2007 at 10:48:47AM -0600, Scott Wood wrote:
> On Mon, Dec 10, 2007 at 11:48:25PM +0300, Anton Vorontsov wrote:
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index 232c298..596982f 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -73,6 +7
On Wed, Dec 12, 2007 at 05:53:43PM +0100, Thomas Klein wrote:
> +static void ehea_update_adapter_handles(struct ehea_adapter *adapter)
> +{
> +int i, k;
> +int j = 0;
> +
> +memset(adapter->res_handles, sizeof(adapter->res_handles), 0);
arguments wrong way around.
Dave
On Mon, Dec 10, 2007 at 11:49:51PM +0300, Anton Vorontsov wrote:
> + [EMAIL PROTECTED] {
> + #address-cells = <2>;
> + #size-cells = <1>;
> + compatible = "fsl,mpc8360erdk-localbus",
> + "fsl,mpc8360e-localbus",
> +
This patch adds kdump support using the new PPC crash shutdown hook to the
ehea driver. The driver now keeps a list of firmware handles which have to
be freed in case of a crash. The crash handler does the minimum required: it
frees the firmware resource handles plus broadcast/multicast registratio
On Mon, Dec 10, 2007 at 11:48:45PM +0300, Anton Vorontsov wrote:
> +EXPORT_SYMBOL_GPL(gpio_request);
> +EXPORT_SYMBOL_GPL(gpio_direction_input);
> +EXPORT_SYMBOL_GPL(gpio_direction_output);
> +EXPORT_SYMBOL_GPL(gpio_get_value);
> +EXPORT_SYMBOL_GPL(gpio_set_value);
These look like APIs, not intern
Anton Vorontsov wrote:
> On Wed, Dec 12, 2007 at 10:40:35AM -0600, Scott Wood wrote:
>> Not enough to be worth the complexity compared to the overhead of NAND
>> access -- especially in the likely case of a non-SMP build.
>
> I'm allowing UPM access from the IRQ handlers (because nothing prevents
On Wed, Dec 12, 2007 at 10:40:35AM -0600, Scott Wood wrote:
> On Mon, Dec 10, 2007 at 11:47:05PM +0300, Anton Vorontsov wrote:
> > 5 - FSL UPM infrastructure:
> > ---
> > UPM address register is shared among UPMs, so we have to do
> > proper locking. On the other hand, if we
On Mon, Dec 10, 2007 at 11:48:25PM +0300, Anton Vorontsov wrote:
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index 232c298..596982f 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -73,6 +73,10 @@ config GENERIC_FIND_NEXT_BIT
> bool
> default y
>
This patch adds support to use the fixed-link property
of an ethernet node to fs_enet for the
CONFIG_PPC_CPM_NEW_BINDING case.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
drivers/net/fs_enet/fs_enet-main.c |9 -
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git
This is based on [PATCH RFC 3/7] [POWERPC] CPM2: implement GPIO API.
Signed-off-by: Jochen Friedrich <[EMAIL PROTECTED]>
---
arch/powerpc/platforms/8xx/Kconfig |1 +
arch/powerpc/sysdev/commproc.c | 199 +++-
2 files changed, 199 insertions(+), 1 deletions
On Mon, Dec 10, 2007 at 11:47:05PM +0300, Anton Vorontsov wrote:
> 5 - FSL UPM infrastructure:
> ---
> UPM address register is shared among UPMs, so we have to do
> proper locking. On the other hand, if we know that specific
> board using only one UPM we could bypass locking
On Mon, Dec 10, 2007 at 11:47:05PM +0300, Anton Vorontsov wrote:
> 6. FSL UPM NAND driver:
> ---
> It's using FSL UPM functions and GPIO API. It does not implement
> device tree partitions parsing. That issue is completely other
> matter, that is, I have to factor out parsing fu
On Dec 12, 2007, at 9:17 AM, Timur Tabi wrote:
> Timur Tabi wrote:
>> Define the layout of a binary blob that contains a QE firmware and
>> instructions
>> on how to upload it. Add function qe_upload_firmware() to parse
>> the blob
>> and perform the actual upload. Fully define 'struct rsp'
On Wed, Dec 12, 2007 at 04:49:46PM +0100, Jochen Friedrich wrote:
> Hi Anton,
>
> > +int gpio_direction_input(unsigned int gpio)
> > +{
> > + unsigned long flags;
> > + int port = gpio / 32;
> > + int pin = gpio % 32;
> > +
> > + spin_lock_irqsave(&cpm2_port_locks[port], flags);
> > +
> >
Or Gerlitz <[EMAIL PROTECTED]> wrote on 12.12.2007 13:14:25:
> Joachim Fenkes wrote:
> > Roland Dreier <[EMAIL PROTECTED]> wrote on 10.12.2007 22:47:37:
>
> >> It's an optional device feature, so this should be OK
> >> (although the iSER driver currently seems to depend on a device
> >> supporting
Hi Anton,
> +int gpio_direction_input(unsigned int gpio)
> +{
> + unsigned long flags;
> + int port = gpio / 32;
> + int pin = gpio % 32;
> +
> + spin_lock_irqsave(&cpm2_port_locks[port], flags);
> +
> + cpm2_set_pin(port, pin, CPM_PIN_INPUT | CPM_PIN_GPIO);
> +int gpio_direct
Timur Tabi wrote:
> Updates the ucc_geth device driver to check the new rx-clock-name and
> tx-clock-name properties first. If present, it uses the new function
> qe_clock_source() to obtain the clock source. Otherwise, it checks the
> deprecated rx-clock and tx-clock properties.
>
> Update the
Timur Tabi wrote:
> Add function qe_clock_source() which takes a string containing the name of a
> QE clock source (as is typically found in device trees) and returns the
> matching enum qe_clock value.
>
> Update booting-without-of.txt to indicate that the UCC properties rx-clock
> and tx-clock a
Timur Tabi wrote:
> Define the layout of a binary blob that contains a QE firmware and
> instructions
> on how to upload it. Add function qe_upload_firmware() to parse the blob
> and perform the actual upload. Fully define 'struct rsp' in immap_qe.h to
> include the actual RISC Special Registers
>> When I run this on a G5 (w/HW FP) I get:
>>
>> dmul 3fe0 * 1 = 0 expected 0 (PASS)
>> dmul bfe0 * 1 = 8000 expected 0 (PASS)
>> dmul 8001 * bfe0 = 0 expected 0 (PASS)
>>
>> ddiv 1 / 4000 = 0 expected 0 (PASS)
>>
>> and on th
On Wed, 2007-12-12 at 06:54 -0600, Josh Boyer wrote:
> On Wed, 12 Dec 2007 15:25:01 +0530
> Subrata Modak <[EMAIL PROTECTED]> wrote:
>
> > On Mon, 2007-12-10 at 21:40 -0800, Linus Torvalds wrote:
> > > It's been a week, and I promised to be a good boy and try to follow my
> > > release rules, so
On Wed, 12 Dec 2007 15:25:01 +0530
Subrata Modak <[EMAIL PROTECTED]> wrote:
> On Mon, 2007-12-10 at 21:40 -0800, Linus Torvalds wrote:
> > It's been a week, and I promised to be a good boy and try to follow my
> > release rules, so here is the next -rc.
> >
> > Things _have_ slowed down, althoug
On Tue, Dec 11, 2007 at 11:36:47AM +1100, David Gibson wrote:
[...]
> > > > OF device tree GPIOs bindings are similar to IRQs:
> > > >
> > > > node {
> > > > gpios = ;
> > > > gpio-parent = <&par_io_controller>;
> > > > };
> > > >
> > > > "bank pin" scheme is controller specific,
On Mon, 2007-12-10 at 21:40 -0800, Linus Torvalds wrote:
> It's been a week, and I promised to be a good boy and try to follow my
> release rules, so here is the next -rc.
>
> Things _have_ slowed down, although I'd obviously be lying if I said we've
> got all the regressions handled and under c
> On Wed, 2007-12-12 at 20:37 +1100, Stephen Rothwell wrote:
> > On Wed, 12 Dec 2007 19:06:54 +1100 Benjamin Herrenschmidt <[EMAIL PROTECTED]
hing.org> wrote:
> > >
> > > Time to introduce a merged misc.S ? :-)
> >
> > We already have one ...
>
> Hah ! I should have looked :-)
Me too! :-)
Sorry
On Tue, Dec 11, 2007 at 02:10:52AM +0300, Anton Vorontsov wrote:
> On Tue, Dec 11, 2007 at 10:04:53AM +1100, David Gibson wrote:
> > On Mon, Dec 10, 2007 at 11:47:05PM +0300, Anton Vorontsov wrote:
> > > Hi all,
> > >
> > > Here are patches to support NAND on UPM. That driver is generic for
> > >
On Wed, 2007-12-12 at 20:37 +1100, Stephen Rothwell wrote:
> On Wed, 12 Dec 2007 19:06:54 +1100 Benjamin Herrenschmidt <[EMAIL PROTECTED]>
> wrote:
> >
> > Time to introduce a merged misc.S ? :-)
>
> We already have one ...
Hah ! I should have looked :-)
Ben.
On Wed, 12 Dec 2007 19:06:54 +1100 Benjamin Herrenschmidt <[EMAIL PROTECTED]>
wrote:
>
> Time to introduce a merged misc.S ? :-)
We already have one ...
--
Cheers,
Stephen Rothwell[EMAIL PROTECTED]
http://www.canb.auug.org.au/~sfr/
pgpDFBPRg7zUg.pgp
Description: PGP signat
On Tue, 2007-12-11 at 23:26, Kumar Gala wrote:
> >>
> >> how did you find this?
> >>
> > It supposed to run the following test case on a powerpc platform.
> > Yu's patch fixes the issue.
> > Could you help to merge this patch in your tree?
> > ---
> > #include
> > #include
> > #include
> > #ifde
On Wed, 2007-12-12 at 01:59 -0600, Kumar Gala wrote:
> On Dec 11, 2007, at 11:45 PM, Michael Neuling wrote:
>
> > This makes the setjmp/longjmp code used by xmon, generically available
> > to other code. It also removes the requirement for debugger hooks to
> > be only called on 0x300 (data stor
On Dec 11, 2007, at 11:45 PM, Michael Neuling wrote:
> This makes the setjmp/longjmp code used by xmon, generically available
> to other code. It also removes the requirement for debugger hooks to
> be only called on 0x300 (data storage) exception.
>
> Signed-off-by: Michael Neuling <[EMAIL PROT
99 matches
Mail list logo
