Uytterhoeven geert.uytterhoe...@sonycom.com
---
arch/powerpc/platforms/ps3/time.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
___
Linuxppc-dev mailing list
Linuxppc-dev
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
Hi Ben,
Please send upstream if it is not too late.
-Geoff
arch/powerpc/configs/ps3_defconfig | 211 +
1 file changed, 75 insertions(+), 136 deletions(-)
--- a/arch/powerpc/configs/ps3_defconfig
On 08/24/2009 10:20 PM, Michael Neuling wrote:
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
Hi Ben,
Please send upstream if it is not too late.
Is the current one broken? Maybe a commit message would be nice :-P
The current one is fine. The main change are:
o Refresh
Update ps3_defconfig.
o Refresh for 2.6.31.
o Remove MTD support.
o Add more HID drivers.
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/configs/ps3_defconfig | 211 +
1 file changed, 75 insertions(+), 136 deletions
On 09/01/2009 05:25 PM, Lee HongWoo wrote:
On Wed, Sep 2, 2009 at 2:32 AM, Geoff Levand
geoffrey.lev...@am.sony.comwrote:
In the general case, __start is the entry point of the kernel.
It is where the bootloader or boot wrapper program jumps to
when it transfers control to the kernel.
I
-boot-game-os programs:
ps3flash read failed 0x205
os_area_header_read: read error: os_area_header: Input/output error
main:627: os_area_read_hp error.
ERROR: can't change boot flag
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
drivers/ps3/ps3stor_lib.c | 65
Hi Ben,
On 09/11/2009 12:17 AM, Benjamin Herrenschmidt wrote:
This is the powerpc batch for 2.6.32.
Will we ever get this one in...
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-June/073567.html
-Geoff
___
Linuxppc-dev mailing list
,
.mask = ps3_chip_mask,
.unmask = ps3_chip_unmask,
.eoi = ps3_chip_eoi,
This PS3 part looks OK.
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https
On 12/04/2009 03:27 AM, Martyn Welch wrote:
Hi Ben,
Could you please pull the git tags from Linus' tree when you pull?
You'll need to push the tags out to your repo on k.org too...
-Geoff
___
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
From: Benjamin Herrenschmidt b...@kernel.crashing.org
The option to support the old style PSK interface in the PS3
GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set
Signed-off-by: Benjamin Herrenschmidt b...@kernel.crashing.org
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
On 12/18/2009 10:30 AM, Johannes Berg wrote:
On Fri, 2009-12-18 at 10:24 -0800, Geoff Levand wrote:
From: Benjamin Herrenschmidt b...@kernel.crashing.org
The option to support the old style PSK interface in the PS3
GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set
Signed-off
From: Benjamin Herrenschmidt b...@kernel.crashing.org
The option to support the old style PSK interface in the PS3
GELIC wireless drivers requires CONFIG_WEXT_PRIV to be set
Signed-off-by: Benjamin Herrenschmidt b...@kernel.crashing.org
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
Hi,
Remis Lima Baima wrote:
Hi to all. I was tracing a bug in the snd_usb_audio driver
(PlayStation 3, Kernel 2.6.29-rc2,
git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-linux.git) and
for that I tried to use the dynamic ftrace to get less debug output.
But it did not work at all.
Hi,
I did a bit of work on this today.
Steven Rostedt wrote:
ip:d0045aec jumps to d0046340 r2: d0050c00
3d82 398c5740 5740 toc: d0046360 c000 7cac
ip:d00458d0 jumps to d0046340 r2: d0050c00
3d82 398c5740 5740
not run any
tracer specific tests though.
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
I tested this scsi header fix on PS3 and it fixes the BLK_MAX_CDB
not defined build error when CONFIG_BLOCK=n.
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
___
Linuxppc-dev
Hi Jon,
Jon Tollefson wrote:
This patch takes out the reserved region loop from inside
the loop that goes over each node. It looks up the active region containing
the start of the reserved region. If it extends past that active region then
it adjusts the size and gets the next active region
.
Currently, there is no mechanism for the platform code to know
when the nodes have been registered, and hence, when it is safe
to add hot plug memory.
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/include/asm/machdep.h |1 +
arch/powerpc/kernel/sysfs.c
=y.
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/platforms/ps3/mm.c |4 +---
arch/powerpc/platforms/ps3/platform.h |1 +
arch/powerpc/platforms/ps3/setup.c|6 ++
3 files changed, 8 insertions(+), 3 deletions(-)
--- a/arch/powerpc/platforms/ps3
Roel Kluin wrote:
Make id signed so a negative id will get noticed. Error out if
ps3av_auto_videomode() fails.
Signed-off-by: Roel Kluin roel.kl...@gmail.com
---
arch/powerpc/include/asm/ps3av.h |2 +-
drivers/ps3/ps3av.c | 16
2 files changed, 13
() fails the system will boot with just the
128 MiB of boot memory
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
Ben,
Please send upstream for 2.6.29, as this effects the current
Fedora 11 development kernel, and maybe other distros which
are based on 2.6.29.
arch/powerpc/platforms
. That is, of course, physbase.
If we don't use physbase here, the reserve_size can be
made too large.
From: Dave Hansen d...@linux.vnet.ibm.com
Tested-by: Geoff Levand geoffrey.lev...@am.sony.com Tested on PS3.
---
linux-2.6.git-dave/arch/powerpc/mm/numa.c |5 +++--
1 file changed, 3 insertions(+), 2
On 02/12/2009 03:41 PM, Steven Rostedt wrote:
On Thu, 12 Feb 2009, Geoff Levand wrote:
On 02/11/2009 05:10 PM, Steven Rostedt wrote:
This is the port to PowerPC of the function graph tracer that was written
by Frederic Weisbecker for the x86 architecture. It is broken up
into a series
On 02/17/2009 03:14 PM, gt bradley wrote:
I'm trying to set up my PS3 to netboot (with an nfsroot).
I'm using instructions at
http://www.kernel.org/pub/linux/kernel/people/geoff/cell/ps3-howto/ps3-nfs-root-howto.txt
I've passed section 3 (using tftp) to verify network /dhcp etc. (i.e.
On 01/05/2009 07:46 AM, Arnd Bergmann wrote:
On Sunday 28 December 2008, malc wrote:
Now to the Christmas cheer, i've tried v2.6.28 and couldn't help but
notice that the problem is gone, bisecting v2.6.27 (which funnily i
had to mark good) to v2.6.28 (which has to be marked bad) wasn't fun
To help users diagnose hotpug memory problems, change the
printing of memory hotplug errors from DBG() to pr_err().
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/platforms/ps3/mm.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/powerpc
The powerpc 64 bit architecture defines three flags for the
DABR (Data Address Breakpoint Register). Add definitions
for the currently missing DABR_DATA_WRITE and DABR_DATA_READ
flags to the powerpc reg.h file.
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/include/asm
Hi Ben,
This is a small set of patches for your 2.6.30 next branch.
[patch 1/3] powerpc: Add missing DABR flags
[patch 2/3] powerpc/ps3: Print memory hotplug errors
[patch 3/3] powerpc/ps3: Make ps3av_set_video_mode mode ID signed
-Geoff
--
___
From: roel kluin roel.kl...@gmail.com
Change the ps3av_auto_videomode() mode id argument type from unsigned to
signed so a negative id can be detected and reported as an -EINVAL failure.
Signed-off-by: Roel Kluin roel.kl...@gmail.com
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
Update ps3_defconfig.
Sets these options:
CONFIG_PS3_VRAM=m
CONFIG_BLK_DEV_DM=m
CONFIG_USB_HIDDEV=y
CONFIG_EXT4_FS=y
CONFIG_DYNAMIC_FTRACE=y
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
Ben,
Please send upstream for 2.6.29.
-Geoff
arch/powerpc/configs/ps3_defconfig
/mtd/devices/ps3vram.c
Looks good, certainly an improvement.
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Hi,
On 03/09/2009 07:12 AM, Alessandro Zummo wrote:
On Mon, 9 Mar 2009 14:26:23 +0100
Geert Uytterhoeven geert.uytterhoe...@sonycom.com wrote:
+
+MODULE_AUTHOR(Sony Corporation);
real name, if possible and a contact address
here . Just in case I need someone to bother :)
Please look
On 03/09/2009 06:26 AM, Geert Uytterhoeven wrote:
Create a real RTC driver for PS3, and unhook the deprecated
ppc_md.[gs]et_rtc_time.
8 files changed, 132 insertions(+), 18 deletions(-)
Sorry, I hadn't been following the discussion closely, but
could you explain why we are going from a
Hi,
On 03/09/2009 11:43 AM, Alessandro Zummo wrote:
Geoff Levand geoffrey.lev...@am.sony.com wrote:
On 03/09/2009 07:12 AM, Alessandro Zummo wrote:
On Mon, 9 Mar 2009 14:26:23 +0100
Geert Uytterhoeven geert.uytterhoe...@sonycom.com wrote:
+
+MODULE_AUTHOR(Sony Corporation);
real
On 03/09/2009 06:26 AM, Geert Uytterhoeven wrote:
Create a real RTC driver for PS3, and unhook the deprecated
ppc_md.[gs]et_rtc_time.
Signed-off-by: Geert Uytterhoeven geert.uytterhoe...@sonycom.com
Cc: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/include/asm/ps3.h
Update ps3_defconfig.
Sets these options:
CONFIG_PS3_VRAM=m
CONFIG_BLK_DEV_DM=m
CONFIG_USB_HIDDEV=y
CONFIG_EXT4_FS=y
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
Ben,
Here is an updated patch (v2). I removed CONFIG_DYNAMIC_FTRACE
from this one.
Please send upstream
On 03/31/2009 04:52 PM, Michael Ellerman wrote:
On Tue, 2009-03-31 at 18:25 +0200, Geert Uytterhoeven wrote:
With today's kernel, I can no longer kexec any kernel on PS3:
| /proc/device-tree/chosen/linux,kernel-end: No such file or directory
| Could not get memory layout
Today's bad
Fix build warnings like these when CONFIG_PS3_FLASH=n:
arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but
not used
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/platforms/ps3/os-area.c |2 +-
1 file changed, 1 insertion(+), 1 deletion
Hi Paul,
This is a small set of patches for 2.6.30.
(1) and (2) are simple build fixes.
(3) is a patch by Milton submitted back in October that seems to
have beed missed. Could you consider it for 2.6.30?
(4) is an update to the MAINTAINERS file. Can you take it?
[patch 1/4] powerpc/ps3:
of 'smp_send_stop' was
here
Reported-by: Subrata Modak subr...@linux.vnet.ibm.com
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
arch/powerpc/platforms/ps3/setup.c |4
1 file changed, 4 deletions(-)
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
Correct the MAINTAINERS file patterns for PS3. Removes some PS3
patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and
adds missing PS3 sound and RTC driver patterns.
CC: Arnd Bergmann a...@arndb.de
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
MAINTAINERS |5
ps3 has 4 ipis per cpu and can use the new smp_request_message_ipi to
reduce path length when receiving an ipi.
This has the side effect of setting IRQF_PERCPU.
Signed-off-by: Milton Miller milt...@bga.com
Acked-by: Geoff Levand geoffrey.lev...@am.sony.com
Index: next.git/arch/powerpc/platforms
On 04/14/2009 11:28 AM, Subrata Modak wrote:
Observed the following build error:
---
arch/powerpc/platforms/ps3/setup.c:49: error: redefinition of
‘smp_send_stop’
include/linux/smp.h:125: error: previous definition of ‘smp_send_stop’
was here
Hi Subrata,
Thanks for the report. I submitted
of 'smp_send_stop' was
here
Reported-by: subr...@linux.vnet.ibm.com
Signed-off-by: Geoff Levand geoffrey.lev...@am.sony.com
---
diff --git a/arch/powerpc/platforms/pasemi/setup.c
b/arch/powerpc/platforms/pasemi/setup.c
index c64fb5b..153051e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
On 01/30/2008 04:34 PM, Grant Likely wrote:
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
...
$(obj)/zImage.ps3: vmlinux $(wrapper) $(wrapperbits)
$(srctree)/$(src)/dts/ps3.dts
Seems like this could use $(dtstree).
$(STRIP) -s -R .comment $ -o vmlinux.strip
-
Grant Likely wrote:
diff --git a/arch/powerpc/boot/cuboot-hpc2.c
b/arch/powerpc/boot/cuboot-mpc7448hpc2.c
similarity index 100%
rename from arch/powerpc/boot/cuboot-hpc2.c
rename to arch/powerpc/boot/cuboot-mpc7448hpc2.c
This is not a proper patch.
No rule to make target
Paul,
Here are a few PS3 fixups to apply for 2.6.25.
[patch 1/6] PS3: Fix lpm set bookmark
[patch 2/6] PS3: Fix lpm read pm interval
[patch 3/6] PS3: Fix bootwrapper hang bug
[patch 4/6] PS3: Use system reboot on restart
[patch 5/6] PS3: Sys-manager code cleanup
[patch 6/6] PS3:
of the db10cyc instruction did
not work correctly. This change replaces the db10cyc instruction
with 10 nop instructions.
Signed-off-by: Takashi Yamamoto [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/ps3/ps3-lpm.c |4 ++--
1 file changed, 2 insertions(+), 2 deletions
-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/ps3/ps3-sys-manager.c |2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -622,7 +622,7 @@ static void ps3_sys_manager_final_restar
ps3_vuart_cancel_async(dev
General code cleanups for PS3 system-manager:
o Move all MODULE_ macros to bottom.
o Correct PS3_SM_WAKE_P_O_R value.
o Enhance comment on wakeup source values.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/ps3/ps3-sys-manager.c | 13 +++--
1 file changed, 7 insertions
From: Takashi Yamamoto [EMAIL PROTECTED]
ps3_read_pm (pm_interval) should return an actual HW register value
because the pm_interval register is a counter register.
This patch removes the shadow pm_interval register.
Signed-off-by: Takashi Yamamoto [EMAIL PROTECTED]
Signed-off-by: Geoff Levand
, the system hangs with a blank screen. Earlier
firmwares don't cause such a catastrophic failure, and so this
bug went undetected.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/boot/ps3-hvcall.S |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/boot/ps3
PS3 firmware 1.94 added the source of power and reset events to the
payload of the system manager POWER_PRESSED and RESET_PRESSED events.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/ps3/ps3-sys-manager.c | 29 +++--
1 file changed, 23 insertions(+), 6
On 02/16/2008 08:08 AM, Roel Kluin wrote:
The patch below was not yet tested. If it's correct as it is, please comment.
- if (unlikely(plug) == NO_IRQ) {
+ if (unlikely(plug == NO_IRQ)) {
A good catch! I'll put it in with some other 2.6.25 bug fixes.
-Geoff
On 02/16/2008 09:42 AM, Arjan van de Ven wrote:
On Sat, 16 Feb 2008 18:33:16 +0100
Willy Tarreau [EMAIL PROTECTED] wrote:
On Sat, Feb 16, 2008 at 09:25:52AM -0800, Arjan van de Ven wrote:
On Sat, 16 Feb 2008 17:08:01 +0100
Roel Kluin [EMAIL PROTECTED] wrote:
The patch below was not
On 02/24/2008 12:06 AM, Samuel Tardieu wrote:
Fix unlikely(plug) == NO_IRQ into unlikely(plug == NO_IRQ).
Signed-off-by: Samuel Tardieu [EMAIL PROTECTED]
---
arch/powerpc/platforms/ps3/interrupt.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Thanks for the submission, but
From: Roel Kluin [EMAIL PROTECTED]
Fix a typo bug 'unlikely(x) == y' and add an unlikely() call to
an unlikely code path in the PS3 interrupt routine ps3_get_irq().
Signed-off-by: Roel Kluin [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Hi Paul,
Please apply for 2.6.25
Hi.
Nathan Lynch wrote:
Badari Pulavarty wrote:
Hi Paul,
Here are the hotplug memory remove updates for 2.6.25-rc2-mm1.
How have these been tested? Have you initiated a memory remove
operation from the HMC? That's the only way to catch some bugs...
I'm wondering how the memory hot
On 03/07/2008 08:55 AM, Kumar Gala wrote:
Normally we assume kernel images will be loaded at offset 0. However
there are situations, like when the kernel itself is running at a non-zero
physical address, that we don't want to load it at 0.
Allow the wrapper to take an offset. We use this
Paul and Jeff,
This is a small set of PS3 patches for 2.6.26. Patches
1-5 are ready to apply to the powerpc tree.
Patch 6 for the network driver needs an ACK by Jeff.
[1/6] PS3: Fix unlikely typo in ps3_get_irq
[2/6] PS3: Add ps3_get_speid routine
[3/6] PS3: Bootwrapper improvements
From: Roel Kluin [EMAIL PROTECTED]
Fix a typo bug 'unlikely(x) == y' and add an unlikely() call to
an unlikely code path in the PS3 interrupt routine ps3_get_irq().
Signed-off-by: Roel Kluin [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/platforms/ps3
From: Takashi Yamamoto [EMAIL PROTECTED]
Add a new routine ps3_get_speid() which returns the logical
SPE ID. This ID is needed for profiling support.
Signed-off-by: Takashi Yamamoto [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/platforms/ps3/spu.c |7
if the overlay code is too big.
o Remove some unused instructions.
o Update the text describing the PS3 bootwrapper overlay.
o Add a check for null pointer writes.
o Change hcall return value from s64.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/boot/ps3-head.S | 25
-by: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/platforms/ps3/setup.c | 12 +++-
drivers/ps3/ps3-sys-manager.c | 30 --
drivers/ps3/sys-manager-core.c | 16 ++--
include/asm-powerpc/ps3.h |5 +++--
4 files changed, 44
Add Wake-on-LAN support to the PS3 system-manager. Other OS WOL
support was introduced in PS3 system firmware 2.20.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/ps3/ps3-sys-manager.c | 46 --
include/asm-powerpc/ps3.h |2 +
2 files
From: Masakazu Mokuno [EMAIL PROTECTED]
Add Wake-on-LAN support to the PS3 Gelic network driver.
Other OS WOL support was introduced in PS3 system firmware
2.20.
Signed-off-by: Masakazu Mokuno [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
drivers/net/ps3_gelic_net.c | 81
Hi,
Benjamin Herrenschmidt wrote:
On Wed, 2008-03-26 at 17:39 -0700, Geoff Levand wrote:
Add Wake-on-LAN support to the PS3 system-manager. Other OS WOL
support was introduced in PS3 system firmware 2.20.
There is no sleep in the first place tho :-) Or does this power it up /
boot
if the overlay code is too big.
o Remove some unused instructions.
o Update the text describing the PS3 bootwrapper overlay.
o Add a check for null pointer writes.
o Change hcall return value from s64.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
v2:
o Cleanup null check code.
arch/powerpc
of storage devices that
may appear later in the PS3 repository.
This fixes a few section mismatch warnings.
Signed-off-by: Geert Uytterhoeven [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Hi Paul,
Here is another one for 2.6.26 that Geert just sent me. Please apply
reference to `.ps3_sys_manager_set_wol'
CC: Masakazu Mokuno [EMAIL PROTECTED]
CC: Jeff Garzik [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Hi Paul,
This fixes an error introduced in my 2.6.26 WOL patches now
queued in your powerpc tree. Please apply.
-Geoff
drivers/net
Geert Uytterhoeven wrote:
On Fri, 13 Jul 2007, Olaf Hering wrote:
This driver (or the generic PS3 code) has appearently problems with
O_DIRECT.
glibc aborts parted because the malloc metadata get corrupted. While it
is reproducible, the place where it crashes changes with every version
of
The PS3 bootwrapper files use instructions only available on
64-bit CPUs. Add the code generation directive '.machine ppc64'
for toolchains configured for 32-bit CPUs.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Paul,
Please apply for 2.6.23-rc1.
arch/powerpc/boot/ps3-head.S |2
The PS3 bootwrapper files use instructions only available on
64-bit CPUs. Add the code generation directive '.machine ppc64'
for toolchains configured for 32-bit CPUs.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
Acked-by: Grant Likely [EMAIL PROTECTED]
---
Hi Andrew,
It seems Paul is out
@@
#include linux/dmapool.h
#include linux/dma-mapping.h
#include asm/firmware.h
-#include linux/io.h
#include asm/dma.h
#include asm/lv1call.h
#include asm/ps3.h
Acked-by: Geoff Levand [EMAIL PROTECTED]
___
Linuxppc-dev mailing list
Linuxppc
changes were made.
Signed-off-by: Andre Detsch [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Arnd,
I rebased this to to Paul's powerpc git tree. This needs to go
in for 2.6.23, as it fixes build breakage for PS3-only configs.
Please check and ack.
-Geoff
arch/powerpc
Remove the Kconfig message that indicates the PS3 platform support is
incomplete.
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
v2 changes:
o Fix typo pointed out by Geert
arch/powerpc/platforms/ps3/Kconfig | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/arch
handling.
o Change ps3_storage_wait_for_device() to use a temporary variable to hold
the buffer address.
Signed-off-by: Geert Uytterhoeven [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
V2 changes:
o Correct the value the returned notify_event-event_type is compared to.
arch
Geoff Levand wrote:
Arnd Bergmann wrote:
On Saturday 04 August 2007, Geoff Levand wrote:
From: Andre Detsch [EMAIL PROTECTED]
This patch moves affinity initialization code from spu_base.c to a
new spu_management_of_ops function (init_affinity), which is empty
in the case of PS3
David Gibson wrote:
Except didn't you say you were going to work with Stephen to get DTC
into the kernel source itself? Keeping things similar to Kbuild might
help in that effort.
Actually, after discussions with Stephen and Paulus, we decided not to
take this route.
Could you please let
Segher Boessenkool wrote:
Actually, after discussions with Stephen and Paulus, we decided not
to
take this route. In any case having Kbuild like versioning wouldn't
actually help us any in integrating into a full Kbuild system.
Can you elaborate why you decided not to? I'm just curious.
Paul Mackerras wrote:
David Gibson writes:
We decided that since a formal dtc release was imminent, it would be
simpler to make dtc a new kernel build requirement, rather than
integrate the substantial blob of dtc code into the kernel tree and
then have to deal with the maintenance /
From: [EMAIL PROTECTED]
Add file pattern to MAINTAINER entry
Signed-off-by: Joe Perches [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
I also maintain the file include/asm-powerpc/lv1call.h.
This updated patch adds that file.
-Geoff
MAINTAINERS |7 +++
1 file
splitting.
Please apply as soon as possible. Thanks!
Looks good.
Acked-by: Geoff Levand [EMAIL PROTECTED]
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Masakazu Mokuno wrote:
Fix the bug that the major version part of the firmware
is not compared.
Signed-off-by: Masakazu Mokuno [EMAIL PROTECTED]
CC: Geoff Levand [EMAIL PROTECTED]
---
arch/powerpc/platforms/ps3/setup.c |2 +-
include/asm-powerpc/ps3.h |2 +-
2 files
.
Signed-off-by: Masato Noguchi [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Arnd, please consider for 2.6.24.
Tested on QS20, and seems OK.
arch/powerpc/platforms/cell/spu_base.c | 23 +++
include/asm-powerpc/spu.h |2 +-
2 files
control wrapper routines. The bare metal
routines use the master run control bit, and the PS3 specific
routines use the priv2 run control register.
Signed-off-by: Masato Noguchi [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
Arnd, please consider for 2.6.24.
arch/powerpc
by users, so it would be nice for it to go
in for 2.6.23 if possible. Sorry for it being so late.
Acked-by: Geoff Levand [EMAIL PROTECTED]
___
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Michael Ellerman wrote:
On Wed, 2007-09-26 at 18:33 +0200, Geert Uytterhoeven wrote:
Hi,
Here are some new patches for the PS3 AV Settings Driver (ps3av), which is
used in close collaboration with the PS3 Virtual Frame Buffer Device Driver
(ps3fb):
[1] ps3av: eliminate unneeded
Michael Ellerman wrote:
On Thu, 2007-09-27 at 10:23 -0700, Geoff Levand wrote:
Michael Ellerman wrote:
On Wed, 2007-09-26 at 18:33 +0200, Geert Uytterhoeven wrote:
Question: As several DVI-D displays advertise they support 1080i modes
while
they actually don't (cfr. the quirk database
Hi Badari,
Badari Pulavarty wrote:
Hi Paul Ben,
I am trying to get hotplug memory remove working on ppc64.
In order to verify a given memory region, if its valid or not -
current hotplug-memory patches used /proc/iomem. On IA64 and
x86-64 /proc/iomem shows all memory regions.
I am
Badari Pulavarty wrote:
On Tue, 2007-10-02 at 13:11 -0700, Geoff Levand wrote:
Hi Badari,
Badari Pulavarty wrote:
Hi Paul Ben,
I am trying to get hotplug memory remove working on ppc64.
In order to verify a given memory region, if its valid or not -
current hotplug-memory patches
Ranulf Doswell wrote:
On 06/10/2007, [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
struct saved_params {
- /* param 0 */
s64 rtc_diff;
unsigned int av_multi_out;
- unsigned int ctrl_button;
- /* param 1 */
- u8
Ranulf Doswell wrote:
On 06/10/2007, [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
enum os_area_db_owner {
OS_AREA_DB_OWNER_ANY = -1,
OS_AREA_DB_OWNER_NONE = 0,
OS_AREA_DB_OWNER_PROTOTYPE = 1,
OS_AREA_DB_OWNER_LINUX =
Ranulf Doswell wrote:
On 08/10/2007, *Geoff Levand* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Ranulf Doswell wrote:
As these values are correctly populated by the hypervisor from the
preferences on the standard PS3 OS, it is incredibly useful to
have
Ranulf Doswell wrote:
On 08/10/2007, *Geoff Levand* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
How do we go about claiming one of these OS_AREA_DB_OWNER_ keys? I'd
very much like to use this functionality in my python-ps3 games
library.
It sounds like you should
the
ps3-utils package can be used for userspace database operations.
The latest ps3-utils package is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/geoff/ps3-utils.git
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
v2: Address Geert's comments:
o Replace numeric initializers
Geert Uytterhoeven wrote:
On Sat, 6 Oct 2007 [EMAIL PROTECTED] wrote:
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -112,10 +114,91 @@ struct os_area_params {
u8 _reserved_5[8];
};
+/**
+ * struct os_area_db - Shared flash memory
Geert Uytterhoeven wrote:
On Sat, 6 Oct 2007 [EMAIL PROTECTED] wrote:
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
+static int db_get_video_mode(const struct os_area_db *db,
+unsigned int *video_mode)
^^
+{
+return
to the display.
CC: Geert Uytterhoeven [EMAIL PROTECTED]
Signed-off-by: Geoff Levand [EMAIL PROTECTED]
---
v2: handle unprintable chars.
Paul,
This fixes a very minor bug in linus' current tree. Please consider
for 2.6.24.
-Geoff
arch/powerpc/platforms/ps3/os-area.c | 23 +--
1 file
Arnd Bergmann wrote:
On Wednesday 28 November 2007, Mel Gorman wrote:
On (28/11/07 08:26), Arnd Bergmann didst pronounce:
On Wednesday 28 November 2007, Jon Tollefson wrote:
This patch adds the hugepagesz boot-time parameter for ppc64 that lets
you pick the size for your huge pages.
1 - 100 of 541 matches
Mail list logo
