> What is the status of the mpc5200 support? I see Sylvain's repository
> is still at 2.6.12 (5 months old).
I just published what I've done (on a previous 2.6.14-rc3 tree by Denx).
It's in ftp://gnudd.com/pub/patches/mpc5200/ (also http://).
I used Sylvain's FEC support, hacked a mb() to make P
Am Wed, 7 Dec 2005 09:23:21 -0800 (PST) schrieb roger blofeld
:
> What is the status of the mpc5200 support? I see Sylvain's repository
> is still at 2.6.12 (5 months old).
>
> http://gitbits.246tnt.com/gitweb.cgi?p=linux-2.6-mpc52xx.git;a=summary
>
> The current kernel.org kernel doesn't appea
On Dec 1, 2005, at 7:30 AM, Stefan Roese wrote:
> This patch adds support for the TQ Components TQM85xx modules.
> Currently the
> modules TQM8540/8541/8555/8560 are supported.
>
> Signed-off-by: Stefan Roese
>
> Best regards,
> Stefan
>
Had a question on this, any reason you have to hookup t
Hi all,
With 2.6 now relatively stable running on mpc8xx, I was wondering if someone
has tried to patch in support for High-resolution Posix-timers, as from here:
http://sourceforge.net/projects/high-res-timers
It sounds really attractive, and I wonder why this still isn't officially part
of 2
e/gif
Size: 9519 bytes
Desc: not available
Url :
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051208/4525de6f/attachment.gif
/pipermail/linuxppc-embedded/attachments/20051208/2997c9ca/attachment.bin
IG_FB_ATY_XL_INIT).
I see some post at some list from people using this board on no x86
platform.
Cheers,
Alan
-- next part --
An HTML attachment was scrubbed...
URL:
http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051208/809bf313/attachment.htm
Matt,
Matthew McClintock wrote:
> On Mon, 2005-11-28 at 10:00 -0700, Vitaly Bordug wrote:
>> + mpc82xx_fcc1_pdata.dpram_offset =
>> mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase;
>> + mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c
>> = (u32)cpm2_immr->im_
On Tue, Dec 06, 2005 at 10:14:59PM +0100, Wolfgang Denk wrote:
> In message <20051206164212.82779.qmail at web33505.mail.mud.yahoo.com> you
> wrote:
> > I'm looking at embedding linux into a PowerPC-based
> > system. I found the DENX website to be very helpful,
> > but I'm struggling to understan
On Thu, Dec 08, 2005 at 03:34:15PM +0300, Ruslan V. Sushko wrote:
> This patch adds netpoll controller support for PPC EMAC driver
>
> Signed-off-by: Ruslan V. Sushko
Patches in-line are easier to review... :-)
> @@ -1071,8 +1071,16 @@ static int emac_start_xmit(struct sk_buf
> struct ocp
I have U-Boot running on a board similar to
MPC8260ADS.
bootargs=root=/dev/ram rw console=ttyS0,115200
When I run command: bootm ff06 ff26, the
prompt shows message:
## Booting image at ff06 ...
Image Name: Linux-2.4.25
Image Type: PowerPC Linux Kernel Image (gzip
compressed)
Kumar Gala wrote:
>
> On Nov 30, 2005, at 12:43 AM, Mike Rapoport wrote:
>
>> Nathael PAJANI wrote:
>>
>>> Hi all!
>>>
>>>
>>> I have to support USB hcd for an Actis board based on a MPC8248
>>> processor. I already have a 2.6.9 linux kernel running fine on it,
>>> and actualy have to use it ra
jimmy liu wrote:
> I have U-Boot running on a board similar to
> MPC8260ADS.
> bootargs=root=/dev/ram rw console=ttyS0,115200
try to set console=ttyCPM0,115200 in the bootargs.
> When I run command: bootm ff06 ff26, the
> prompt shows message:
> ## Booting image at ff06 ...
>Image N
On Dec 8, 2005, at 7:40 AM, Vitaly Bordug wrote:
> Matt,
> Matthew McClintock wrote:
>> On Mon, 2005-11-28 at 10:00 -0700, Vitaly Bordug wrote:
>>> + mpc82xx_fcc1_pdata.dpram_offset =
>>> mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase;
>>> + mpc82xx_fcc1_pdata.fcc_regs
Hi All,
I'm working on an MPC866 based board. I needed to make changes related to
the RTC, as the MPC866 lacks an RTC, which is one difference between a
MPC860 and an MPC866.
I have no dedicated RTC chip on the board.
I wish to know if somebody ran linux (2.6.14/2.4.25 kernels) on such a
board.
I
Make sure your system.mss contains something like:
BEGIN OS
PARAMETER OS_NAME = linux_mvl31
PARAMETER OS_VER = 1.01.a
PARAMETER PROC_INSTANCE = ppc405_0
PARAMETER MEM_SIZE = 0x400
PARAMETER PLB_CLOCK_FREQ_HZ = 1
PARAMETER connected_periphs =
(RS232_Uart,IIC_EEPROM,SysACE_Compact
Please see my answers bellow.
John W. Linville wrote:
> On Thu, Dec 08, 2005 at 03:34:15PM +0300, Ruslan V. Sushko wrote:
>
>> This patch adds netpoll controller support for PPC EMAC driver
>>
>> Signed-off-by: Ruslan V. Sushko
>>
>
> Patches in-line are easier to review... :-)
>
>
>> @
On Thu, Dec 08, 2005 at 03:34:15PM +0300, Ruslan V. Sushko wrote:
> This patch adds netpoll controller support for PPC EMAC driver
>
> Signed-off-by: Ruslan V. Sushko
NAK. Please see long discussion on netdev couple of months ago about
netpoll and how it is horribly broken.
In short, to implem
> Hi Wolfgang,
>
> Is there a list of your fixes anywhere? Is the linux-2.6-denx tree
> public?
http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
- kumar
19 matches
Mail list logo
