/pipermail/linuxppc-embedded/attachments/20060628/36e1b81d/attachment.htm
We did the hardware fix described in the BSP user's manual to
make PCIe work (according to the manual section 2.1, step 3).
I.e.
1) removed R193 and R194 on the carrier card (rev 1.2)
2) removed RN1 on the CPU daughter card
2a) connected pad3 of RN1 to pin3 of U12 (IRQ0)
2b)
The bsp I am working on works with 2.6.16.21 but fails with 2.6.17.
How can I find the individual patches that make up the transition
from 2.6.16.21 to 2.6.17 ?
I guess I can use interdiff to create single patch to go from
2.6.16.21 to 2.6.17 but I am really looking to get all
In message 44A1E115.01.12247 at bj163app13.163.com you wrote:
I failed to compile the uboot on my 440GP platform, I set the compile
switch as -m440 -mcpu=440,
Don't do this, then. The ELDK will automatically set approproate
compiler options as needed, depending on your
David H. Lynch Jr. wrote:
The bsp I am working on works with 2.6.16.21 but fails with 2.6.17.
How can I find the individual patches that make up the transition
from 2.6.16.21 to 2.6.17 ?
I guess I can use interdiff to create single patch to go from
2.6.16.21 to 2.6.17 but I
On 6/28/06, David H. Lynch Jr. dhlii at dlasys.net wrote:
The bsp I am working on works with 2.6.16.21 but fails with 2.6.17.
How can I find the individual patches that make up the transition
from 2.6.16.21 to 2.6.17 ?
Unfortunately, there isn't a direct line between .16.21 and .17
Dear,
Here is my problem,
Our environment is:
OS: Linux-2.4.20
platform: MPC852T
Oops: kernel access of bad area, sig: 11
NIP: C000D440 XER: LR: C00BB040 SP: C06BDE50 REGS: c06bdda0
TRAP: 0300Tainted: P
MSR: 9032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 205D, DSISR:
On 6/28/06, Robert Zach rza1 at so-logic.co.at wrote:
Hello!
I use the Standart ml403 Design with the uartlite instead of the
uart16550...
my kernel parameters are:
console=ttl0 ip=off root=/dev/xsysace/disc0/part3 rw
It boots correctly, but i got no login prompt!!
getty is started with
Grant Likely wrote:
On 6/28/06, David H. Lynch Jr. dhlii at dlasys.net wrote:
The bsp I am working on works with 2.6.16.21 but fails with 2.6.17.
How can I find the individual patches that make up the transition
from 2.6.16.21 to 2.6.17 ?
Unfortunately, there isn't a direct line
Alex Zeffertt wrote:
For diffs of individual files between official kernel releases you can
use
http://www.linuxhq.com/kernel/
It's really good!
They appear to be updating or something at the moment. I can not get
to most pages.
Alex
--
Dave Lynch
On Wed, 28 Jun 2006 16:48:34 +0200
morelli.gab morelli.gab at libero.it wrote:
Hi All,
i,m upgrading the linux kernel 2.4 from 2.6, during the phase of restart on
my card the system blocks on message io scheduler noop registered.
the board mount MPC875 processor
...
Serial: CPM
Hi,
I have a XUPV2Pro Xilinx Embedded PPC405 board which is similar in
many respects to the ML3XX series. With good support in the kernel
source tree, I was easily able to compile the 2.4.26 linux kernel to run
on it.
However, I wanted 2.6 kernel to run on it. For some reason, the Xilinx
Hi,
I have ported System Ace driver from 2.4 to 2.6. Please post the
patch soon.
-Ameet
Ameet,
Xilinx is working with MontaVista to create an ML40x LSP (for the Xilinx
ML403/ML405 boards) and port the ML300 LSP to the MV Linux 2.6
distribution, and once it's ready MontaVista plans to push the ported
drivers to the Linux 2.6 tree. I don't have an exact timeframe, but I
hope this is
I have two different boards with same kernel version but different
configurations of this kernel. I wrote a little program that continuosly
malloc memory, on one board when the memory is not more available the test
program gets killed, on the other the board reboots, and something like out
of
Dear Lee,
in message 1151515702.15513.40.camel at mindpipe you wrote:
I have not been able to get readline 5.1 to compile with the ELDK - it
Did you read the documentation?
I can make it work with a hack, but I thought this might be interesting
info.
Please see section 3.7.2. Rebuilding
On 6/28/06, Robert Zach rza1 at so-logic.co.at wrote:
Hello!
I use the Standart ml403 Design with the uartlite instead of the
uart16550...
my kernel parameters are:
console=ttl0 ip=off root=/dev/xsysace/disc0/part3 rw
It boots correctly, but i got no login prompt!!
getty is started with
Hi,
We are on the Yosemite reference board with IBM PPC440EP ver 2.0. On
this board, if we pass traffic from eth0 to eth1 and back, we run into
an eth0 and eth1 transmit lockup consistently. We use nuttcp -T 2 to
generate the traffic. The interfaces are operating at 100/full
(autonegotiated).
18 matches
Mail list logo