Hi Pradeep,
As soon as i apply the sysace driver and temac drivers and copy the
xparameters_ml300.h (from EDK) to xparameters_ml403.h all i get is this...
meaning kernel hangs after displaying Now booting the kernel.
I have experienced this before. But in my condition, I applied both ACE
[EMAIL PROTECTED] wrote:
I am trying to get Linux running on the PPC of a Xilinx V4-FX12 FPGA. I am
using the Linux 2.6.17.9 kernel (I have also tried 2.6.17.1 with the same
results) and have gotten through the kernel initialization to the point
where it mounts the root file system. At this
I'm sorry if this is an easy question, but how do my
schematics tell me that pint IRQ0 uses IRQ 48 in my
board specific PCI IRQ lookup table, where it is
matching up the idsel lines to an irq number? For
instance, in arch/ppc/platforms/4xx/luan.c it maps PCI
interrupts like:
static inline int
Not sure...
I have not been playing with 2.6 kernels but this looks a lot like
the problems I found when trying to get the 2.4 kernel to work.
Default for the avnet v4fx12 is to use the opb bus as raminterface.
You should explicitly select the plb bus...
Jaap de Jong
On Fri, Oct 06, 2006 at 03:27:38AM -0700, Jeff Stevens wrote:
[snip]
Based on their schematics, I assume:
IRQ Line IRQ#
IRQ048
IRQ149
IRQ250
IRQ351
IRQ452
IRQ553
No, this mapping doesn't depend on board shematics. This is