MPC5200 I2S driver

2005-11-05 Thread Frank Bennett
distribution. Is arch/ppc/5xxx_io/i2s.c a good example of a Bestcomm, Codec, non Ethernet example? Thanks to you guys and Wolfgang for you contributions to this thread discussion. */Frank Bennett President /*Mathegraphics,LLC 613 Bentley Pl Fort Collins,CO 80526 www.mathegraphics.com http

Getting started with Xilinx V4 PPC?

2006-02-09 Thread Frank Bennett
external magnetics a RJ45 -Frank Bennett -David Summers On 1/31/06, David H. Lynch Jr. dhlii at dlasys.net wrote: David; I just completed a port of 2.6 to the Pico E-12 which is a Xilinx Virtex-4 with very little hardware. I had the advantage of a system that already had a elf loader

Using bestcomm in an external module (MPC5200B to be exact)

2006-06-17 Thread Frank Bennett
___ Linuxppc-embedded mailing list Linuxppc-embedded at ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded */Frank Bennett President/* Mathegraphics,LLC 613 Bentley Pl

Re: SDRAM failures on MPC5200B

2007-07-20 Thread Frank Bennett
write/verify, debugging u-boot to run out of ram, with w/o cache turned on can be enlightening. /*/Frank Bennett President/*/ Mathegraphics,LLC 613 Bentley Pl Fort Collins,CO 80526 www.mathegraphics.com http://www.mathegraphics.com/_ _ Thanks, Mark Lokowich Systems Engineer Advanced

Bestcomm Firmware update

2007-08-13 Thread Frank Bennett
. DRD2B1or2 follow a DRD2A (ext=1)? o LCD[28:23]orLCD[20:15] or LCD[11:6] what is extraN? drop 101nnn - extraN add 1n - indexN o how many DRD2B1[2] can be stacked up? o when is/can a LDC Literal used? and how? Frank Bennett /* * disasm.c - disassembler

Re: Early driver development resources

2008-01-21 Thread Frank Bennett
instruction to port 0x80. This may still be supported in closed source BIOS distributions. Not sure what they do now with PCIe since it will take more than a single, simple processor instruction. -Frank Bennett Many thanks, Michael