On Mon, 2006-05-29 at 12:45 +0800, KokHow Teh wrote:
Dear sir
Do you have compact flash card driver supported in u-boot.I need it.If
^^
You have posted your question to the wrong list.
you don't have it .Can you tell me how the CF
On Tue, 30 May 2006 16:54:42 -0500
Andy Fleming afleming at freescale.com wrote:
On May 30, 2006, at 08:39, Laurent Pinchart wrote:
Hi everybody,
I ran into a segfault in the fs_enet driver when adding the
network interface to an ethernet bridge. This only happens when
the
Thanks for answer me.
I want to install Xenomai on this mpc8270. Therefor I need 2.6.14 ,because I
need the adeos patch.
Thanks for helping me
Freddy
-Urspr?ngliche Nachricht-
Von: wd at denx.de [mailto:wd at denx.de]
Gesendet: Dienstag, 30. Mai 2006 22:44
An: Behre, Frederik - LT
Whoops.. forgot to replyall.
-- Forwarded message --
From: Steve Iribarne (GMail) [EMAIL PROTECTED]
Date: May 31, 2006 6:30 AM
Subject: Re: execve of /sbin/init fails
To: Anantharaman Chetan-W16155 Chetan.S.Anantharaman at motorola.com
On 5/30/06, Anantharaman Chetan-W16155
/attachments/20060531/9dc601f7/attachment.htm
On 5/31/06, Anantharaman Chetan-W16155
Chetan.S.Anantharaman at motorola.com wrote:
Has anyone successfully ported a Linux 2.4 Kernel on a Xilinx Virtex-4 FX
series FPGA's, PPC405 processor?
Linux on the V4-FX is well supported. Xilinx has an app node
describing how to modify the linuxppc-2.4
Was the port done on a FX100 FPGA? Also, what PVR number does the PPC405
indicate?
Thanks,
Chetan
-Original Message-
From: glikely at gmail.com [mailto:[EMAIL PROTECTED] On Behalf Of Grant
Likely
Sent: Wednesday, May 31, 2006 2:35 PM
To: Anantharaman Chetan-W16155
Cc: linuxppc-embedded at
Hi
I have a custom board which is essentially an icecube with an FPGA on
the local bus. I have a driver which pulls data from the FPGA in
response to interrupts using memcpy_fromio(). I would like to reduce
the CPU usage.
Has anyone used bestcomm to move data from LPB to memory? Is there an
On 5/31/06, Anantharaman Chetan-W16155
Chetan.S.Anantharaman at motorola.com wrote:
Was the port done on a FX100 FPGA?
No; but AFAIK, the ppc hardcore is identical for all FX parts. The
FX100 shoudn't be a problem.
Also, what PVR number does the PPC405 indicate?
Core#0rd pvr
pvr: 0x20011430
I think we need to hold off on this particular patch for a few days.
I took a look at the manual section you're referencing here, and sure
enough, it says that you shouldn't set both bits in the same mtspr
instruction. The manual says this in more than one place, in fact.
However, that
Grant,
Can you please provide a link or perhaps point me to the app node that
Xilinx has to modify linuxppc-2.4 tree for V4-FX.
Thanks,
Chetan
-Original Message-
From: glikely at gmail.com [mailto:[EMAIL PROTECTED] On Behalf Of Grant
Likely
Sent: Wednesday, May 31, 2006 2:35 PM
To:
Hi,
How do allocate the memory using scatter/gather method ?
Can I allocate memory of size of 50 KBytes using
scatter/gather list method and then memory map that area to
user space ?
Please give me the way.
Regards,
Munees.
DISCLAIMER
The contents of this e-mail and any attachment(s) are
12 matches
Mail list logo