Hi
Thanks for that link, none of it seems to apply as the box is not booting
from the media at all, says there is not a bootable media present
Nick Upson, Telensa Ltd, Senior Operations Network Engineer
direct +44 (0) 1799 533252, support hotline +44 (0) 1799 399200
On 21 October 2014 17:02,
Stupid question time:
You're not trying to put a 64-bit installer into a 32-bit system, are you?
That error was common when I didn't pay attention to my CPU type and had
a mix of 32- and 64-bit machines.
On 10/22/2014 6:14 AM, Nick Upson wrote:
Hi
Thanks for that link, none of it seems to
Are you trying to boot using a VGA/keyboard or connected to a serial port? Do
you see anything happening on the console? Or nothing at all?
As someone mentioned previously, kern.cam.boot_delay needs to be set to a
higher value when booting over USB. If you use a memstick image instead of the
vga/keyboard
it goes through the bios boot stuff and just stops or asks me to put a boot
media in the drive (its already present) if using disk, just ignores the
usb stick
the boot process doesn't get far enough to enter that or any setting
Nick Upson, Telensa Ltd, Senior Operations Network
Thanks for that link, none of it seems to apply as the box is not booting
from the media at all, says there is not a bootable media present
Just a shot in the dark, but is there a bios/firmware update for your system?
Sometimes they correct problems they find after its been sold for a
I've been trying to install 2.1.5 into a
http://www.mini-itx.com/store/~FX5624
using the instructions here
https://doc.pfsense.org/index.php/Installing_pfSense#pfSense_Installation_and_Configuration
I want to use the LiveCD so I can install onto a harddrive in the box,
enabling me to add a wider
I've been trying to install 2.1.5 into a
http://www.mini-itx.com/store/~FX5624
The specs look ok. I would think it supports most 'nix distros.
Unfortunately, that website doesn’t say if it supports booting from USB. Does
the manual say it can?
I've tried several ways to write
I can boot from usb that has a different disto (centos)
yes I'm burning the iso not copying it
I've had it boot centos from a dvd using a sata-dvd drive
Nick Upson, Telensa Ltd, Senior Operations Network Engineer
direct +44 (0) 1799 533252, support hotline +44 (0) 1799 399200
On 21 October
