unbelievable, but i've overseen the
following:
php: rc.initial.setlanip: The command '/sbin/ifconfig
'lagg0_vlan3' inet delete' returned exit code '1', the output was
'ifconfig: ioctl (SIOCDIFADDR): Can't assign requested address'
Am 28.
I’ll have to see if I can get into my remote site tomorrow that I have set up
with three VLANs (a bar with three SSIDs).
If I have anything - and you don’t find a solution before then (could be
Saturday when I’ll be on site) - I’ll get back to you.
On Feb 28, 2014, at 12:36 AM, J. Echter
wrot
btw, dhcp runs on pfsense and all the devices are in the right ip range
for vlan3
Am 28.02.2014 07:33, schrieb Ryan Coleman:
> When I set mine up they were pretty straight-forward, I didn’t have to do
> much inside of pfSense to get it going.
>
> So my thought is this: Is your switch configured c
yep, i think so. all the needed ports have the right tags, also vlan 2
also used on the same ports, just works.
switch operates in layer 2 mode.
Am 28.02.2014 07:33, schrieb Ryan Coleman:
> When I set mine up they were pretty straight-forward, I didn’t have to do
> much inside of pfSense to get
When I set mine up they were pretty straight-forward, I didn’t have to do much
inside of pfSense to get it going.
So my thought is this: Is your switch configured correctly for VLAN3?
On Feb 28, 2014, at 12:32 AM, J. Echter
wrote:
> Hi,
>
> i have 3 vlan's on my LAN interface.
>
> 2 of them
Hi,
i have 3 vlan's on my LAN interface.
2 of them working nicely.
With the third i got trouble.
I can access local network devices, but i cannot access internet.
traceroute stops at 192.168.4.1 (vlan3 if address).
default allow everything to any rule is added, dns forwarder listens on
that