LyX1.1.5: Umlauts and equations

Hi All! I guess I found another bug in 1.1.5 Trying to have umlauts in equations via LaTeX (\"a, eg) doesn't seem to work anymore: results in missing charcter in ps or pdf Only solution is to go into "text in equation"-mode, which is a bit annoying. Have fun* Niklas

Re: LyX 1.1.5: A couple of questions on citation

Hi there. The citation reference dialog has been changed in 1.1.6 (current CVS). At the moment the only real change is to make it easier to input multiple citations in one inset (ie, to do "[1,2,3,6]" rather than "[1][2][3][6]" when using numbered citations. We had a discussion about the

Mousewheel

Hi, I don´t know if this is the right place to ask this, but how do I get my mousewheel working in lyx (1.1.4fix1 on suse 6.4). My mouse is MS Intellimouse compatible and I´ve chosen the drivers for this one (with sax). Do I have to edit something in lyx? Any help appreciated. Alexander

Re: Mousewheel

"Alexander" == Alexander Bauer [EMAIL PROTECTED] writes: Alexander I don=B4t know if this is the right place to ask this, but Alexander how do I get = my mousewheel working in lyx (1.1.4fix1 on Alexander suse 6.4). My mouse is MS = Intellimouse compatible and Alexander I=B4ve chosen the drivers

Re: hyphenation problem

"C" == C Friedrich cfried@iff133 writes: C Hi, There is a passage in my thesis which looks like this: "bla bla C bla-, bla bla" LATEX thinks that the dash is a hyphen and does a C line break BEFORE the comma. (I didn't write it with CTRL- of C course.) So the next line begins with a comma,

Re: Cannot install in suse 6.4

"Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan Yes, your format for the --extra-* flags is wrong. Those are Kayvan not supposed to be colon-separated directories. Why? Separating them with colons is indeed correct. JMarc

Re: Cannot install in suse 6.4

"Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan On Sun, Jun 18, 2000 at 02:22:01AM +0200, Eduardo Diaz Uriarte Kayvan wrote: I'm trying to install lyx 1.1.15 in my suse 6.4, but I can't. I downloaded it from the lyx site in a .tar.gz format file. What I do is: ./configure

Re: Segmentaton error again.

"John" == John Culleton [EMAIL PROTECTED] writes: John This gets stranger. I downloaded a precompiled version 1.1.5 on John rpm, exploded it and installed it. It still generates the John segmentation error. Then I eliminated kde and went back to John fvwm2. John It still generates the

Re: Latex Error with LYX 1.1.2 (Emergency)

"Boris" == Boris LENSEIGNE [EMAIL PROTECTED] writes: Boris ! TeX capacity exceeded, sorry [input stack size=300]. \@tempa Boris -\def \@tempa *{\@ssect {\z@ }{-3.25ex\@plus -1ex \@minus Boris -.2ex}{1 l.494 } .} Boris == Do you have

Re: Mousewheel

Sax was not sufficient to accomplish this task (also SuSe 6.x): I had to edit the /etc/XF86Config file by hand Look for something similar in this file like: Section "Pointer" Protocol"IMPS/2" Device "/dev/psaux" Resolution 100 Buttons 5

Multiple lines in one table cell ...

Hi Lyx Users, I know this has been a topic for a thread, but the suggestions I found in the mailing-list archive did not help me much. I want to have several lines in on cell of a table, when terminating each line with a ctl+enter (as suggested in the list archive) the ouput in Lyx looks just

Re: Multiple lines in one table cell ...

Emre Hi Angus, Emre thanks for the immediate help ! Emre Unfortunately the option "Linebreaks" is not available for Emre me in Lyx when I right-click into the table. Emre Any idea ? Sure. I refer you to section 4.4.4 Multiple lines in cells of the user guide. It appears that you have first to

Re: Multiple lines in one table cell ...

On 19-Jun-2000 Angus Leeming wrote: Emre I want to have several lines in on cell of a table, when Emre terminating each line with a ctl+enter (as suggested Emre in the list archive) the ouput in Lyx looks just as I want it. Emre Still - when looking at the dvi preview I see that the line

Re: Mousewheel

Thanks Paul, it works. But before I had to install imwheel. Is it possible to change the speed of the wheel? I have read earlier in a mail from Nick V. Pakoulin that is only possible in the source of lyx. But I´m more a user than a programmer! :-) Are there other (more easy) ways to do this?

RE: anyone there?

On 19-Jun-2000 Shawn Koons wrote: Hello - Is there anyone out there? I haven't got any messages from here in over a week, is trouble on my end or elsewhere? Please post reply to list and my address. That may give me some indication of the trouble. Thank you Shawn -- Mitakuye

Re: Mousewheel

Alexander Bauer wrote: Thanks Paul, it works. But before I had to install imwheel. Is it possible to change the speed of the wheel? I have read earlier in a mail from Nick V. Pakoulin that is only possible in the source of lyx. But I´m more a user than a programmer! :-) Are there

Re: [Q] How to generate the character « and » ?

Hi... On 19-Jun-2000 Jean-Marc Lasgouttes wrote: Jean-Pierre lyx-1.1.5 lyxrc allows to use the compoe key: uncomment Jean-Pierre override_x_deadkeys false Didnt't check it however, Jean-Pierre should allow to type in the whole isolatin set Jean-Pierre (Copyright, Yen, etc.) This should

Language conversion?

How do I convert text that has the attribute Language:english to Language:default? Is there a way to do this the "GUI way" or do I need to know a magic command? Roland -- Roland Krause Visiting Research Associate - Center for Computational Mechanics Washington University, Saint Louis

Re: Question about document defaults and Lyx layouts

Thank you for your answer. I'd like to make two comments: 1. This is more a suggestion than a problem. In talking about document defaults in LyX it would be good to have some way to figure out what those defaults are for each document type without having to actually print the document or look

RevTeX4

RevTeX 4, which is the American Physical Society's class(es) for LaTeX2e, is currently in its fourth beta, which they claim will be the last. Those of you who've been around for a while will recall that RevTeX 3 worked only with LaTeX209, which required various kludges to work with LyX. Happily,

Re: Question about document defaults and Lyx layouts

"Pedro" == Pedro Sanchez [EMAIL PROTECTED] writes: Pedro Thank you for your answer. I'd like to make two comments: Pedro 1. This is more a suggestion than a problem. In talking about Pedro document defaults in LyX it would be good to have some way to Pedro figure out what those defaults are

Re: printing two sided.

"Ralph" == Ralph Boland [EMAIL PROTECTED] writes: Ralph I am using lyx 1.0.4 I am having trouble printing an article Ralph (with ams things loaded into it) two sided. Ralph I found the some advice from a couple of old postings (below): The posting you found was related to a bug of lyx 1.1.4,

Re: Question about document defaults and Lyx layouts

Jean-Marc Lasgouttes wrote: "Pedro" == Pedro Sanchez [EMAIL PROTECTED] writes: Pedro Thank you for your answer. I'd like to make two comments: Pedro 1. This is more a suggestion than a problem. In talking about Pedro document defaults in LyX it would be good to have some way to Pedro

Re: How to generate a link to and HTML page ?

On Sat, Jun 17, 2000 at 09:54:31PM +0200, Jacques Nilo wrote: Hello. I am totally new to lyx and installed today the 1.1.5 version on my Mandrake 7.0 linux box. I would like to be able to make a link to an HTML page without showing the full adress of thi page. I do not find the solution. I am

Re: Language conversion?

On Mon, Jun 19, 2000 at 11:09:33AM -0500, Roland Krause wrote: How do I convert text that has the attribute Language:english to Language:default? Is there a way to do this the "GUI way" or do I need to know a magic command? Select the text, open the layout-character popup (alt+l c, or use the

line weight

Title: line weight How do you increase the weight of a line and can you create a line other than using above, below? Jeff

Re: Cannot install in suse 6.4

On Mon, Jun 19, 2000 at 01:00:41PM +0200, Jean-Marc Lasgouttes wrote: "Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan Yes, your format for the --extra-* flags is wrong. Those are Kayvan not supposed to be colon-separated directories. Why? Separating them with colons is

LyX1.1.5: Umlauts and equations

Hi All! I guess I found another bug in 1.1.5 Trying to have umlauts in equations via LaTeX (\"a, eg) doesn't seem to work anymore: results in missing charcter in ps or pdf Only solution is to go into "text in equation"-mode, which is a bit annoying. Have fun* Niklas

Re: LyX 1.1.5: A couple of questions on citation

Hi there. The citation reference dialog has been changed in 1.1.6 (current CVS). At the moment the only real change is to make it easier to input multiple citations in one inset (ie, to do "[1,2,3,6]" rather than "[1][2][3][6]" when using numbered citations. We had a discussion about the

Mousewheel

Hi, I don´t know if this is the right place to ask this, but how do I get my mousewheel working in lyx (1.1.4fix1 on suse 6.4). My mouse is MS Intellimouse compatible and I´ve chosen the drivers for this one (with sax). Do I have to edit something in lyx? Any help appreciated. Alexander

Re: Mousewheel

"Alexander" == Alexander Bauer [EMAIL PROTECTED] writes: Alexander I don=B4t know if this is the right place to ask this, but Alexander how do I get = my mousewheel working in lyx (1.1.4fix1 on Alexander suse 6.4). My mouse is MS = Intellimouse compatible and Alexander I=B4ve chosen the drivers

Re: hyphenation problem

"C" == C Friedrich cfried@iff133 writes: C Hi, There is a passage in my thesis which looks like this: "bla bla C bla-, bla bla" LATEX thinks that the dash is a hyphen and does a C line break BEFORE the comma. (I didn't write it with CTRL- of C course.) So the next line begins with a comma,

Re: Cannot install in suse 6.4

"Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan Yes, your format for the --extra-* flags is wrong. Those are Kayvan not supposed to be colon-separated directories. Why? Separating them with colons is indeed correct. JMarc

Re: Cannot install in suse 6.4

"Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan On Sun, Jun 18, 2000 at 02:22:01AM +0200, Eduardo Diaz Uriarte Kayvan wrote: I'm trying to install lyx 1.1.15 in my suse 6.4, but I can't. I downloaded it from the lyx site in a .tar.gz format file. What I do is: ./configure

Re: Segmentaton error again.

"John" == John Culleton [EMAIL PROTECTED] writes: John This gets stranger. I downloaded a precompiled version 1.1.5 on John rpm, exploded it and installed it. It still generates the John segmentation error. Then I eliminated kde and went back to John fvwm2. John It still generates the

Re: Latex Error with LYX 1.1.2 (Emergency)

"Boris" == Boris LENSEIGNE [EMAIL PROTECTED] writes: Boris ! TeX capacity exceeded, sorry [input stack size=300]. \@tempa Boris -\def \@tempa *{\@ssect {\z@ }{-3.25ex\@plus -1ex \@minus Boris -.2ex}{1 l.494 } .} Boris == Do you have

Re: Mousewheel

Sax was not sufficient to accomplish this task (also SuSe 6.x): I had to edit the /etc/XF86Config file by hand Look for something similar in this file like: Section "Pointer" Protocol"IMPS/2" Device "/dev/psaux" Resolution 100 Buttons 5

Multiple lines in one table cell ...

Hi Lyx Users, I know this has been a topic for a thread, but the suggestions I found in the mailing-list archive did not help me much. I want to have several lines in on cell of a table, when terminating each line with a ctl+enter (as suggested in the list archive) the ouput in Lyx looks just

Re: Multiple lines in one table cell ...

Emre Hi Angus, Emre thanks for the immediate help ! Emre Unfortunately the option "Linebreaks" is not available for Emre me in Lyx when I right-click into the table. Emre Any idea ? Sure. I refer you to section 4.4.4 Multiple lines in cells of the user guide. It appears that you have first to

Re: Multiple lines in one table cell ...

On 19-Jun-2000 Angus Leeming wrote: Emre I want to have several lines in on cell of a table, when Emre terminating each line with a ctl+enter (as suggested Emre in the list archive) the ouput in Lyx looks just as I want it. Emre Still - when looking at the dvi preview I see that the line

Re: Mousewheel

Thanks Paul, it works. But before I had to install imwheel. Is it possible to change the speed of the wheel? I have read earlier in a mail from Nick V. Pakoulin that is only possible in the source of lyx. But I´m more a user than a programmer! :-) Are there other (more easy) ways to do this?

RE: anyone there?

On 19-Jun-2000 Shawn Koons wrote: Hello - Is there anyone out there? I haven't got any messages from here in over a week, is trouble on my end or elsewhere? Please post reply to list and my address. That may give me some indication of the trouble. Thank you Shawn -- Mitakuye

Re: Mousewheel

Alexander Bauer wrote: Thanks Paul, it works. But before I had to install imwheel. Is it possible to change the speed of the wheel? I have read earlier in a mail from Nick V. Pakoulin that is only possible in the source of lyx. But I´m more a user than a programmer! :-) Are there

Re: [Q] How to generate the character « and » ?

Hi... On 19-Jun-2000 Jean-Marc Lasgouttes wrote: Jean-Pierre lyx-1.1.5 lyxrc allows to use the compoe key: uncomment Jean-Pierre override_x_deadkeys false Didnt't check it however, Jean-Pierre should allow to type in the whole isolatin set Jean-Pierre (Copyright, Yen, etc.) This should

Language conversion?

How do I convert text that has the attribute Language:english to Language:default? Is there a way to do this the "GUI way" or do I need to know a magic command? Roland -- Roland Krause Visiting Research Associate - Center for Computational Mechanics Washington University, Saint Louis

Re: Question about document defaults and Lyx layouts

Thank you for your answer. I'd like to make two comments: 1. This is more a suggestion than a problem. In talking about document defaults in LyX it would be good to have some way to figure out what those defaults are for each document type without having to actually print the document or look

RevTeX4

RevTeX 4, which is the American Physical Society's class(es) for LaTeX2e, is currently in its fourth beta, which they claim will be the last. Those of you who've been around for a while will recall that RevTeX 3 worked only with LaTeX209, which required various kludges to work with LyX. Happily,

Re: Question about document defaults and Lyx layouts

"Pedro" == Pedro Sanchez [EMAIL PROTECTED] writes: Pedro Thank you for your answer. I'd like to make two comments: Pedro 1. This is more a suggestion than a problem. In talking about Pedro document defaults in LyX it would be good to have some way to Pedro figure out what those defaults are

Re: printing two sided.

"Ralph" == Ralph Boland [EMAIL PROTECTED] writes: Ralph I am using lyx 1.0.4 I am having trouble printing an article Ralph (with ams things loaded into it) two sided. Ralph I found the some advice from a couple of old postings (below): The posting you found was related to a bug of lyx 1.1.4,

Re: Question about document defaults and Lyx layouts

Jean-Marc Lasgouttes wrote: "Pedro" == Pedro Sanchez [EMAIL PROTECTED] writes: Pedro Thank you for your answer. I'd like to make two comments: Pedro 1. This is more a suggestion than a problem. In talking about Pedro document defaults in LyX it would be good to have some way to Pedro

latex in figures

Hi, I want to draw some figures with greek letters and subscipts in it (using xfig). The best way to achieve this is inserting some latex in my figures. But how to store this and how to import this in lyx? - latex figures are too limited - eps can't handle latex A nice sollution is the combined

Re: How to generate a link to and HTML page ?

On Sat, Jun 17, 2000 at 09:54:31PM +0200, Jacques Nilo wrote: Hello. I am totally new to lyx and installed today the 1.1.5 version on my Mandrake 7.0 linux box. I would like to be able to make a link to an HTML page without showing the full adress of thi page. I do not find the solution. I am

Re: Language conversion?

On Mon, Jun 19, 2000 at 11:09:33AM -0500, Roland Krause wrote: How do I convert text that has the attribute Language:english to Language:default? Is there a way to do this the "GUI way" or do I need to know a magic command? Select the text, open the layout-character popup (alt+l c, or use the

line weight

Title: line weight How do you increase the weight of a line and can you create a line other than using above, below? Jeff

Re: Cannot install in suse 6.4

On Mon, Jun 19, 2000 at 01:00:41PM +0200, Jean-Marc Lasgouttes wrote: "Kayvan" == Kayvan A Sylvan [EMAIL PROTECTED] writes: Kayvan Yes, your format for the --extra-* flags is wrong. Those are Kayvan not supposed to be colon-separated directories. Why? Separating them with colons is

LyX1.1.5: Umlauts and equations

Hi All! I guess I found another bug in 1.1.5 Trying to have umlauts in equations via LaTeX (\"a, eg) doesn't seem to work anymore: results in missing charcter in ps or pdf Only solution is to go into "text in equation"-mode, which is a bit annoying. Have fun* Niklas

Re: LyX 1.1.5: A couple of questions on citation

Hi there. The citation reference dialog has been changed in 1.1.6 (current CVS). At the moment the only real change is to make it easier to input multiple citations in one inset (ie, to do "[1,2,3,6]" rather than "[1][2][3][6]" when using numbered citations. We had a discussion about the

Mousewheel

Hi,   I don´t know if this is the right place to ask this, but how do I get my mousewheel working in lyx (1.1.4fix1 on suse 6.4). My mouse is MS Intellimouse compatible and I´ve chosen the drivers for this one (with sax).  Do I have to edit something in lyx?   Any help appreciated.  

Re: Mousewheel

> "Alexander" == Alexander Bauer <[EMAIL PROTECTED]> writes: Alexander> I don=B4t know if this is the right place to ask this, but Alexander> how do I get = my mousewheel working in lyx (1.1.4fix1 on Alexander> suse 6.4). My mouse is MS = Intellimouse compatible and Alexander> I=B4ve chosen

Re: hyphenation problem

> "C" == C Friedrich writes: C> Hi, There is a passage in my thesis which looks like this: "bla bla C> bla-, bla bla" LATEX thinks that the dash is a hyphen and does a C> line break BEFORE the comma. (I didn't write it with CTRL- of C> course.) So the next line begins with a

Re: Cannot install in suse 6.4

> "Kayvan" == Kayvan A Sylvan <[EMAIL PROTECTED]> writes: Kayvan> Yes, your format for the --extra-* flags is wrong. Those are Kayvan> not supposed to be colon-separated directories. Why? Separating them with colons is indeed correct. JMarc

Re: Cannot install in suse 6.4

> "Kayvan" == Kayvan A Sylvan <[EMAIL PROTECTED]> writes: Kayvan> On Sun, Jun 18, 2000 at 02:22:01AM +0200, Eduardo Diaz Uriarte Kayvan> wrote: >> I'm trying to install lyx 1.1.15 in my suse 6.4, but I can't. I >> downloaded it from the lyx site in a .tar.gz format file. >> >> What I do is:

Re: Segmentaton error again.

> "John" == John Culleton <[EMAIL PROTECTED]> writes: John> This gets stranger. I downloaded a precompiled version 1.1.5 on John> rpm, exploded it and installed it. It still generates the John> segmentation error. Then I eliminated kde and went back to John> fvwm2. John> It still generates

Re: Latex Error with LYX 1.1.2 (Emergency)

> "Boris" == Boris LENSEIGNE <[EMAIL PROTECTED]> writes: Boris> ! TeX capacity exceeded, sorry [input stack size=300]. \@tempa Boris> ->\def \@tempa *{\@ssect {\z@ }{-3.25ex\@plus -1ex \@minus Boris> -.2ex}{1 l.494 } .} Boris> == Do

Re: Mousewheel

Sax was not sufficient to accomplish this task (also SuSe 6.x): I had to edit the /etc/XF86Config file by hand Look for something similar in this file like: Section "Pointer" Protocol"IMPS/2" Device "/dev/psaux" Resolution 100 Buttons 5

Multiple lines in one table cell ...

Hi Lyx Users, I know this has been a topic for a thread, but the suggestions I found in the mailing-list archive did not help me much. I want to have several lines in on cell of a table, when terminating each line with a + (as suggested in the list archive) the ouput in Lyx looks just as I want

Re: Multiple lines in one table cell ...

Emre> Hi Angus, Emre> thanks for the immediate help ! Emre> Unfortunately the option "Linebreaks" is not available for Emre> me in Lyx when I right-click into the table. Emre> Any idea ? Sure. I refer you to section 4.4.4 Multiple lines in cells of the user guide. It appears that you have first

Re: Multiple lines in one table cell ...

On 19-Jun-2000 Angus Leeming wrote: > Emre> I want to have several lines in on cell of a table, when > Emre> terminating each line with a + (as suggested > Emre> in the list archive) the ouput in Lyx looks just as I want it. > > Emre> Still - when looking at the dvi preview I see that the line

Re: Mousewheel

Thanks Paul, it works. But before I had to install imwheel. Is it possible to change the speed of the wheel? I have read earlier in a mail from Nick V. Pakoulin that is only possible in the source of lyx. But I´m more a user than a programmer! :-) Are there other (more easy) ways to do this?

RE: anyone there?

On 19-Jun-2000 Shawn Koons wrote: > Hello - > > Is there anyone out there? > > I haven't got any messages from here in over a week, is trouble on my > end or elsewhere? Please post reply to list and my address. That may > give me some indication of the trouble. > > > Thank you > Shawn > --

Re: Mousewheel

Alexander Bauer wrote: > > Thanks Paul, > > it works. But before I had to install imwheel. > > Is it possible to change the speed of the wheel? > I have read earlier in a mail from Nick V. Pakoulin > that is only possible in the source of lyx. > But I´m more a user than a programmer! :-) > Are

Re: [Q] How to generate the character « and » ?

Hi... On 19-Jun-2000 Jean-Marc Lasgouttes wrote: > Jean-Pierre> lyx-1.1.5 lyxrc allows to use the compoe key: uncomment > Jean-Pierre> override_x_deadkeys false Didnt't check it however, > Jean-Pierre> should allow to type in the whole isolatin set > Jean-Pierre> (Copyright, Yen, etc.) > >

Language conversion?

How do I convert text that has the attribute Language:english to Language:default? Is there a way to do this the "GUI way" or do I need to know a magic command? Roland -- Roland Krause Visiting Research Associate - Center for Computational Mechanics Washington University, Saint Louis

Re: Question about document defaults and Lyx layouts

Thank you for your answer. I'd like to make two comments: 1. This is more a suggestion than a problem. In talking about document defaults in LyX it would be good to have some way to figure out what those defaults are for each document type without having to actually print the document or look

RevTeX4

RevTeX 4, which is the American Physical Society's class(es) for LaTeX2e, is currently in its fourth beta, which they claim will be the last. Those of you who've been around for a while will recall that RevTeX 3 worked only with LaTeX209, which required various kludges to work with LyX. Happily,

Re: Question about document defaults and Lyx layouts

> "Pedro" == Pedro Sanchez <[EMAIL PROTECTED]> writes: Pedro> Thank you for your answer. I'd like to make two comments: Pedro> 1. This is more a suggestion than a problem. In talking about Pedro> document defaults in LyX it would be good to have some way to Pedro> figure out what those

Re: printing two sided.

> "Ralph" == Ralph Boland <[EMAIL PROTECTED]> writes: Ralph> I am using lyx 1.0.4 I am having trouble printing an article Ralph> (with ams things loaded into it) two sided. Ralph> I found the some advice from a couple of old postings (below): The posting you found was related to a bug of

Re: Question about document defaults and Lyx layouts

Jean-Marc Lasgouttes wrote: > > > "Pedro" == Pedro Sanchez <[EMAIL PROTECTED]> writes: > > Pedro> Thank you for your answer. I'd like to make two comments: > > Pedro> 1. This is more a suggestion than a problem. In talking about > Pedro> document defaults in LyX it would be good to have

latex in figures

Hi, I want to draw some figures with greek letters and subscipts in it (using xfig). The best way to achieve this is inserting some latex in my figures. But how to store this and how to import this in lyx? - latex figures are too limited - eps can't handle latex A nice sollution is the combined

Re: How to generate a link to and HTML page ?

On Sat, Jun 17, 2000 at 09:54:31PM +0200, Jacques Nilo wrote: > Hello. I am totally new to lyx and installed today the 1.1.5 version on > my Mandrake 7.0 linux box. > I would like to be able to make a link to an HTML page without showing > the full adress of thi page. I do not find the solution.

Re: Language conversion?

On Mon, Jun 19, 2000 at 11:09:33AM -0500, Roland Krause wrote: > How do I convert text that has the attribute Language:english to > Language:default? Is there a way to do this the "GUI way" or do I need to know > a magic command? Select the text, open the layout->character popup (alt+l c, or use

line weight

Title: line weight How do you increase the weight of a line and can you create a line other than using above, below? Jeff

Re: Cannot install in suse 6.4

On Mon, Jun 19, 2000 at 01:00:41PM +0200, Jean-Marc Lasgouttes wrote: > > "Kayvan" == Kayvan A Sylvan <[EMAIL PROTECTED]> writes: > > Kayvan> Yes, your format for the --extra-* flags is wrong. Those are > Kayvan> not supposed to be colon-separated directories. > > Why? Separating them with