Curtis Osterhoudt wrote:
It works for me on a minimal test file; I'll
report whether it works on a large, multi-multipart document.
Good. If you encounter any experiences which you thin are important, feel free
to enhance the instructions on the wiki.
Jürgen
Hello,
I tried all fonts available on the documents settings but $\mathbf{\pi}$
doesn't show any visual difference from $\pi$, in other words, it
doesn't seem to be bold! This happens on DVI, PS and PDF exports too.
Do I have to choose a different font (I use palatino 12pt)?
Or maybe a particular
Try using the boldmath package. Just write \usepackage{bm} in your preamble,
and then, inside your math environment, write \bm{\pi} and you'll get the bold
pi character.
-Original Message-
From: Giovanni Luca Ciampaglia [mailto:[EMAIL PROTECTED]
Sent: Thu 8/10/2006 12:13 PM
To: LyX
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
However, use MiKTeX's package manager to assure that you've installed
the correct package tex4ht
Gisbert, Fernando schrieb:
Try using the boldmath package.
Don't use this package because it can only bold single characters. LyX
has built in support for bold: use the commands
\boldsymbol\pi
to get a bold pi. Boldsymbol works also for complete formulas.
regards Uwe
Jean-Marc Lasgouttes wrote:
Uwe == Uwe Stöhr [EMAIL PROTECTED] writes:
Uwe Nicolás a écrit:
I am having problems with greyed out note ...:
(1) Select Itemize, (2) write Hello Bob, (3) select (i.e.
highlight) Bob, and (4) go to Insert-Note and select Greyed
out
In my installation, a note
Uwe Stöhr ha scritto:
Gisbert, Fernando schrieb:
Try using the boldmath package.
Don't use this package because it can only bold single characters. LyX
has built in support for bold: use the commands
\boldsymbol\pi
to get a bold pi. Boldsymbol works also for complete formulas.
regards
Nicolás wrote:
It is already reported here:
http://bugzilla.lyx.org/show_bug.cgi?id=2723
and here
http://bugzilla.lyx.org/show_bug.cgi?id=2382
Jürgen
Uwe Stöhr wrote:
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
Yes it does look like that. However, I used the Miktex2.5 complete
installer to
Which would not explain why futzing with the environment variables cured
(or at least moved) the bug. Then again, perhaps I'm asking too much of
the bug as far as consistency goes.
This brings me back to my thesis that somewhere there is a buffer
overflow. How/why it would involve both the
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote:
Enrico Forestieri writes:
Translation: Is it possible to add a footnote to the caption of a
floating table/picture?
Not really. This is a restriction of LaTeX.
It is possible. You need to put the table/picture in a
I've just had an idea. Today the search bar in the wiki let's you search
the wiki for pages containing one or more words. The search result is
displayed on a page which for instance looks like this:
http://wiki.lyx.org/LyX/LyX?n=LyX.LyXaction=searchq=ideas
That page again contains the
I probably noticed this behavior before, but it did not register long
enough to comment on. However, as I edit my presentation notes it comes up
over and over, so I thought to mention it here.
When I delete a line and want to close the space, I need to place the
cursor at the end of the
Hi,
I am writing a paper using the IEEEtran document class. This is a
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do
Adrian M. Peter wrote:
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do this?
Use a table float and right-click on its
Enrico Forestieri writes:
But this doesn't work for captions and this was the question. LyX 1.4.2
prevents the insertion of footnotes to captions.
I don't think so. See the attached.
Of course everything is possible with (La)TeX and some tricks.
I knew the possibility with the minipage,
[EMAIL PROTECTED] wrote:
However, what if the search page contained additional links and forms
that let you search more than just the wiki? How about searching this
mailing list? Or searching Herbert's tips and tricks on LaTeX?
Good idea. I've got all these bookmarked, but I think a number
Hi all,
I am editing a Latex file which was originally from WinEdt.
As we know that in Latex raw source file, in the preamble part, there are a
lot of definitions of new commends, for instance, the following being one:
\newcommand{\kcal}{\mathcal{K}}
\newcommand{\acal}{\mathcal{A}}
It would be a great if LyX could provide a convinient reminder of all these
new definitions so that I can use them fastly...
For 1.4.x, you can export - latex and have a look at the source. For
1.5.x, there is a view- source dialog in which you can see part or
all source code.
Cheers,
Bo
Curtis Osterhoudt wrote:
It works for me on a minimal test file; I'll
report whether it works on a large, multi-multipart document.
Good. If you encounter any experiences which you thin are important, feel free
to enhance the instructions on the wiki.
Jürgen
Hello,
I tried all fonts available on the documents settings but $\mathbf{\pi}$
doesn't show any visual difference from $\pi$, in other words, it
doesn't seem to be bold! This happens on DVI, PS and PDF exports too.
Do I have to choose a different font (I use palatino 12pt)?
Or maybe a particular
Try using the boldmath package. Just write \usepackage{bm} in your preamble,
and then, inside your math environment, write \bm{\pi} and you'll get the bold
pi character.
-Original Message-
From: Giovanni Luca Ciampaglia [mailto:[EMAIL PROTECTED]
Sent: Thu 8/10/2006 12:13 PM
To: LyX
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
However, use MiKTeX's package manager to assure that you've installed
the correct package tex4ht
Gisbert, Fernando schrieb:
Try using the boldmath package.
Don't use this package because it can only bold single characters. LyX
has built in support for bold: use the commands
\boldsymbol\pi
to get a bold pi. Boldsymbol works also for complete formulas.
regards Uwe
Jean-Marc Lasgouttes wrote:
Uwe == Uwe Stöhr [EMAIL PROTECTED] writes:
Uwe Nicolás a écrit:
I am having problems with greyed out note ...:
(1) Select Itemize, (2) write Hello Bob, (3) select (i.e.
highlight) Bob, and (4) go to Insert-Note and select Greyed
out
In my installation, a note
Uwe Stöhr ha scritto:
Gisbert, Fernando schrieb:
Try using the boldmath package.
Don't use this package because it can only bold single characters. LyX
has built in support for bold: use the commands
\boldsymbol\pi
to get a bold pi. Boldsymbol works also for complete formulas.
regards
Nicolás wrote:
It is already reported here:
http://bugzilla.lyx.org/show_bug.cgi?id=2723
and here
http://bugzilla.lyx.org/show_bug.cgi?id=2382
Jürgen
Uwe Stöhr wrote:
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
Yes it does look like that. However, I used the Miktex2.5 complete
installer to
Which would not explain why futzing with the environment variables cured
(or at least moved) the bug. Then again, perhaps I'm asking too much of
the bug as far as consistency goes.
This brings me back to my thesis that somewhere there is a buffer
overflow. How/why it would involve both the
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote:
Enrico Forestieri writes:
Translation: Is it possible to add a footnote to the caption of a
floating table/picture?
Not really. This is a restriction of LaTeX.
It is possible. You need to put the table/picture in a
I've just had an idea. Today the search bar in the wiki let's you search
the wiki for pages containing one or more words. The search result is
displayed on a page which for instance looks like this:
http://wiki.lyx.org/LyX/LyX?n=LyX.LyXaction=searchq=ideas
That page again contains the
I probably noticed this behavior before, but it did not register long
enough to comment on. However, as I edit my presentation notes it comes up
over and over, so I thought to mention it here.
When I delete a line and want to close the space, I need to place the
cursor at the end of the
Hi,
I am writing a paper using the IEEEtran document class. This is a
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do
Adrian M. Peter wrote:
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do this?
Use a table float and right-click on its
Enrico Forestieri writes:
But this doesn't work for captions and this was the question. LyX 1.4.2
prevents the insertion of footnotes to captions.
I don't think so. See the attached.
Of course everything is possible with (La)TeX and some tricks.
I knew the possibility with the minipage,
[EMAIL PROTECTED] wrote:
However, what if the search page contained additional links and forms
that let you search more than just the wiki? How about searching this
mailing list? Or searching Herbert's tips and tricks on LaTeX?
Good idea. I've got all these bookmarked, but I think a number
Hi all,
I am editing a Latex file which was originally from WinEdt.
As we know that in Latex raw source file, in the preamble part, there are a
lot of definitions of new commends, for instance, the following being one:
\newcommand{\kcal}{\mathcal{K}}
\newcommand{\acal}{\mathcal{A}}
It would be a great if LyX could provide a convinient reminder of all these
new definitions so that I can use them fastly...
For 1.4.x, you can export - latex and have a look at the source. For
1.5.x, there is a view- source dialog in which you can see part or
all source code.
Cheers,
Bo
Curtis Osterhoudt wrote:
> It works for me on a minimal test file; I'll
> report whether it works on a large, multi-multipart document.
Good. If you encounter any experiences which you thin are important, feel free
to enhance the instructions on the wiki.
Jürgen
Hello,
I tried all fonts available on the documents settings but $\mathbf{\pi}$
doesn't show any visual difference from $\pi$, in other words, it
doesn't seem to be bold! This happens on DVI, PS and PDF exports too.
Do I have to choose a different font (I use palatino 12pt)?
Or maybe a particular
Try using the boldmath package. Just write \usepackage{bm} in your preamble,
and then, inside your math environment, write \bm{\pi} and you'll get the bold
pi character.
-Original Message-
From: Giovanni Luca Ciampaglia [mailto:[EMAIL PROTECTED]
Sent: Thu 8/10/2006 12:13 PM
To: LyX
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
However, use MiKTeX's package manager to assure that you've installed
the correct package "tex4ht"
Gisbert, Fernando schrieb:
Try using the boldmath package.
Don't use this package because it can only bold single characters. LyX
has built in support for bold: use the commands
\boldsymbol\pi
to get a bold pi. Boldsymbol works also for complete formulas.
regards Uwe
Jean-Marc Lasgouttes wrote:
"Uwe" == Uwe Stöhr <[EMAIL PROTECTED]> writes:
Uwe> Nicolás a écrit:
I am having problems with greyed out note ...:
(1) Select Itemize, (2) write "Hello Bob", (3) select (i.e.
highlight) "Bob", and (4) go to Insert->Note and select "Greyed
out"
In my
Uwe Stöhr ha scritto:
> Gisbert, Fernando schrieb:
>
>> Try using the boldmath package.
>
> Don't use this package because it can only bold single characters. LyX
> has built in support for bold: use the commands
>
> \boldsymbol\pi
>
> to get a bold pi. Boldsymbol works also for complete formulas.
Nicolás wrote:
> It is already reported here:
>
> http://bugzilla.lyx.org/show_bug.cgi?id=2723
and here
http://bugzilla.lyx.org/show_bug.cgi?id=2382
Jürgen
Uwe Stöhr wrote:
TechTonics wrote:
I have the complete download and completely installed Miktex2.5.
tex4ht.cab\texmf\miktex\bin
This path sounds like the package is installed for MiKTeX 2.4 and not
for 2.5.
Yes it does look like that. However, I used the Miktex2.5 complete
installer to
Which would not explain why futzing with the environment variables cured
(or at least moved) the bug. Then again, perhaps I'm asking too much of
the bug as far as consistency goes.
This brings me back to my thesis that somewhere there is a buffer
overflow. How/why it would involve both the
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote:
> Enrico Forestieri writes:
>
> >> > Translation: Is it possible to add a footnote to the caption of a
> >> > floating table/picture?
> >>
> >> Not really. This is a restriction of LaTeX.
> >
> > It is possible. You need to put the
I've just had an idea. Today the search bar in the wiki let's you search
the wiki for pages containing one or more words. The search result is
displayed on a page which for instance looks like this:
http://wiki.lyx.org/LyX/LyX?n=LyX.LyX=search=ideas
That page again contains the search
I probably noticed this behavior before, but it did not register long
enough to comment on. However, as I edit my presentation notes it comes up
over and over, so I thought to mention it here.
When I delete a line and want to close the space, I need to place the
cursor at the end of the
Hi,
I am writing a paper using the IEEEtran document class. This is a
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do
Adrian M. Peter wrote:
two-column format. I would like to place some tables on a page by
themselves. The tables are wide so they need to use width of page rather
than one of the two columns. Does anyone have any suggestions on how I can
do this?
Use a table float and right-click on its
Enrico Forestieri writes:
But this doesn't work for captions and this was the question. LyX 1.4.2
prevents the insertion of footnotes to captions.
I don't think so. See the attached.
Of course everything is possible with (La)TeX and some tricks.
I knew the possibility with the minipage,
[EMAIL PROTECTED] wrote:
However, what if the "search page" contained additional links and forms
that let you search more than just the wiki? How about searching this
mailing list? Or searching Herbert's tips and tricks on LaTeX?
Good idea. I've got all these bookmarked, but I think a
Hi all,
I am editing a Latex file which was originally from WinEdt.
As we know that in Latex raw source file, in the preamble part, there are a
lot of definitions of new commends, for instance, the following being one:
\newcommand{\kcal}{\mathcal{K}}
\newcommand{\acal}{\mathcal{A}}
It would be a great if LyX could provide a convinient reminder of all these
new definitions so that I can use them fastly...
For 1.4.x, you can export -> latex and have a look at the source. For
1.5.x, there is a view-> source dialog in which you can see part or
all source code.
Cheers,
Bo
57 matches
Mail list logo
