Is there any way in LyX to 'color' a table cell's background with a
grey pattern? I didn't find anything to this effect in the menu,
documentation and wiki. Perhaps a good soul would be kind enough to
indicate the appropriate LaTex command to use (if that's what's
needed)?
Thanks,
Stefano
Is there any way in LyX to 'color' a table cell's background with a
grey pattern? I didn't find anything to this effect in the menu,
documentation and wiki. Perhaps a good soul would be kind enough to
indicate the appropriate LaTex command to use (if that's what's
needed)?
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others
contain numbers.
yes, if you make the single cells multicolumn cells.
I remember it was possible too align cells to the decimal point, but i
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others
contain numbers.
yes, if you make the single cells multicolumn cells.
I remember it was possible too align cells to the decimal point, but i
Is it possible to set specific alignment to cells in the same column?
This would be useful when some cells contain numbers, whereas others contain
numbers.
I remember it was possible too align cells to the decimal point, but i do
not remember how to do; any hints?
thanks
--pol
pol wrote:
> Is it possible to set specific alignment to cells in the same column?
> This would be useful when some cells contain numbers, whereas others
> contain numbers.
yes, if you make the single cells "multicolumn" cells.
> I remember it was possible too align cells to the decimal point,
-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks Greets,
daTom
--
Thomas daTom Mayerhofer
://www.da-tom.de/stuff/lyx-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks Greets,
daTom
--
Thomas daTom Mayerhofer
Herbert's tips page
(http://tug.org/TeXnik/mainFAQ.cgi?file=table/table#table3
-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks Greets,
daTom
--
Thomas daTom Mayerhofer
://www.da-tom.de/stuff/lyx-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks Greets,
daTom
--
Thomas daTom Mayerhofer
Herbert's tips page
(http://tug.org/TeXnik/mainFAQ.cgi?file=table/table#table3
-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks & Greets,
daTom
--
Thomas "daTom" Mayerhofer
://www.da-tom.de/stuff/lyx-tabular.png
Do you have any hints? Is there some code I could put into the
preamble to get the vertical space for the table cells bigger?
Thanks & Greets,
daTom
--
Thomas "daTom" Mayerhofer
Herbert's tips page
(http://tug.org/TeXnik/mainFAQ.cgi?file=tabl
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
I have accomplished it by putting a minipage in the table cell and putting
the text with line breaks in that. The result
Alexander Blüm wrote:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
choose a fixed width column from within the
table menu
Herbert
--
http://TeXnik.de/
http://PSTricks.de/
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
You have to specify a fixed width for the column. (This is a LaTeX
limitation, not a LyX limitation.)
-- Paul
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
You have to define a specific width for the column where you want to insert
linebreaks in the table formatting dialog.
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
perhaps try inserting a 2 by 1 table within a cell of the original table
lata,
paul
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
i don't have lyx in front of me, but perhaps try inserting a 2×1 table
within the cell you want the linebreak
Alexander Blüm schrieb:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
I described this and other table issues at
http://wiki.lyx.org/LyX/Tables
regards Uwe
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
I have accomplished it by putting a minipage in the table cell and putting
the text with line breaks in that. The result
Alexander Blüm wrote:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
choose a fixed width column from within the
table menu
Herbert
--
http://TeXnik.de/
http://PSTricks.de/
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
You have to specify a fixed width for the column. (This is a LaTeX
limitation, not a LyX limitation.)
-- Paul
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
You have to define a specific width for the column where you want to insert
linebreaks in the table formatting dialog.
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
perhaps try inserting a 2 by 1 table within a cell of the original table
lata,
paul
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
i don't have lyx in front of me, but perhaps try inserting a 2×1 table
within the cell you want the linebreak
Alexander Blüm schrieb:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
I described this and other table issues at
http://wiki.lyx.org/LyX/Tables
regards Uwe
Alexander Blüm wrote:
>
> hello again,
>
> I'd like to create a table with linebreaks inside the cells.
> Inserting linebreaks doesn't help, neither does C-enter...
> any ideas?
>
I have accomplished it by putting a minipage in the table cell and putting
the text with line breaks in that. The
Alexander Blüm wrote:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
choose a fixed width column from within the
table menu
Herbert
--
http://TeXnik.de/
http://PSTricks.de/
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
You have to specify a fixed width for the column. (This is a LaTeX
limitation, not a LyX limitation.)
-- Paul
Alexander Blüm wrote:
> hello again,
>
> I'd like to create a table with linebreaks inside the cells.
> Inserting linebreaks doesn't help, neither does C-enter...
> any ideas?
>
>
You have to define a specific width for the column where you want to insert
linebreaks in the table formatting
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
perhaps try inserting a 2 by 1 table within a cell of the original table
lata,
paul
Alexander Blüm wrote:
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
i don't have lyx in front of me, but perhaps try inserting a 2×1 table
within the cell you want the linebreak
Alexander Blüm schrieb:
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
I described this and other table issues at
http://wiki.lyx.org/LyX/Tables
regards Uwe
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
--
Cheers,
Alex
shakespeare:
/(bb|[^b]{2})/
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
--
Cheers,
Alex
shakespeare:
/(bb|[^b]{2})/
hello again,
I'd like to create a table with linebreaks inside the cells.
Inserting linebreaks doesn't help, neither does C-enter...
any ideas?
--
Cheers,
Alex
shakespeare:
/(bb|[^b]{2})/
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second
Kornel Benko wrote:
Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second
Kornel Benko wrote:
Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Hi,
I have a little problem concerning the vertical alignment of text in
table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
first column containing simple text and the second column containing small
diagrams using the psmatrix-command. The problem is that the text
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 10:42, Jan W. Schemm wrote:
> Hi,
>
> I have a little problem concerning the vertical alignment of text in
> table-cells (Lyx 1.3.0). Basically I defined a table with 2 columns, the
> first column contain
Kornel Benko wrote:
> Add empty text (ERT: {}) in front of the graphics-cell. Make the vertical
> alignment of the cell be center too. Dvi-output should be ok.
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
--- snip ---
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the vertical
alignment is still messed up.
give a LyX example file.
Herbert
-BEGIN PGP SIGNED MESSAGE-
On Freitag, 12. September 2003 15:34, Herbert Voß wrote:
> Jan W. Schemm schrieb:
> > Still doesn't work. Lyx produced the following Latex-Code, but the
> > vertical alignment is still messed up.
>
> give a LyX example file.
Seems to be ok now. Each call to
Kornel Benko schrieb:
Jan W. Schemm schrieb:
Still doesn't work. Lyx produced the following Latex-Code, but the
vertical alignment is still messed up.
give a LyX example file.
Seems to be ok now. Each call to '\ncline{..}{..}' was on its own line. This has
messed up the dvi and ps- output.
Hi,
I'm not sure if this is a LyX question or a LaTeX question. Is there any
way (using ERT if necessary) to get some cells of a table to have a gray
background while others have a transparent/white background?
Thanks,
Paul
Answered my own question by looking at the Tips and Tricks page (which I
should have done in the first place!):
http://www.lyx.org/help/table/cells.php.
Paul (who'll know better next time)
Paul A. Rubin [EMAIL PROTECTED] wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Hi,
I'm not
Hi,
I'm not sure if this is a LyX question or a LaTeX question. Is there any
way (using ERT if necessary) to get some cells of a table to have a gray
background while others have a transparent/white background?
Thanks,
Paul
Answered my own question by looking at the Tips and Tricks page (which I
should have done in the first place!):
http://www.lyx.org/help/table/cells.php.
Paul (who'll know better next time)
Paul A. Rubin [EMAIL PROTECTED] wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
Hi,
I'm not
Hi,
I'm not sure if this is a LyX question or a LaTeX question. Is there any
way (using ERT if necessary) to get some cells of a table to have a gray
background while others have a transparent/white background?
Thanks,
Paul
Answered my own question by looking at the Tips and Tricks page (which I
should have done in the first place!):
http://www.lyx.org/help/table/cells.php.
Paul (who'll know better next time)
"Paul A. Rubin" <[EMAIL PROTECTED]> wrote in
[EMAIL PROTECTED]:">news:[EMAIL PROTECTED]:
> Hi,
>
>
On Fri, Dec 07, 2001 at 06:53:57AM +0100, Herbert Voss wrote:
Rodney K wrote:
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
On Fri, Dec 07, 2001 at 06:53:57AM +0100, Herbert Voss wrote:
Rodney K wrote:
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
On Fri, Dec 07, 2001 at 06:53:57AM +0100, Herbert Voss wrote:
> Rodney K wrote:
>
> > I have a document that is double spaced with about 6 tables. One of the
> > tables is a longtable which spans about 3 pages. This table has 4
> > columns and 13 rows, each cells has multiple lines. How can I
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
line spacing in the cells to single spacing and only for that one table?
Rodney
--
Rodney K wrote:
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
line spacing in the cells to single spacing and only for that
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
line spacing in the cells to single spacing and only for that one table?
Rodney
--
Rodney K wrote:
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
line spacing in the cells to single spacing and only for that
I have a document that is double spaced with about 6 tables. One of the
tables is a longtable which spans about 3 pages. This table has 4
columns and 13 rows, each cells has multiple lines. How can I cange the
line spacing in the cells to single spacing and only for that one table?
Rodney
--
Rodney K wrote:
> I have a document that is double spaced with about 6 tables. One of the
> tables is a longtable which spans about 3 pages. This table has 4
> columns and 13 rows, each cells has multiple lines. How can I cange the
> line spacing in the cells to single spacing and only for
On Tue, Apr 03, 2001 at 10:17:20PM +0200, Herbert Voss wrote:
[EMAIL PROTECTED] wrote:
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this
On Tue, Apr 03, 2001 at 10:17:20PM +0200, Herbert Voss wrote:
[EMAIL PROTECTED] wrote:
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this
On Tue, Apr 03, 2001 at 10:17:20PM +0200, Herbert Voss wrote:
> [EMAIL PROTECTED] wrote:
> >
> > I am trying to work out a medium complicacy table. In
> > order to have a decent layout, I would like to turn hyphenation off
> > *inside* the table (and only _inside it_).
> >
> >
Dear LyXers,
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this possible at all? I imagine I have to resort to raw LaTeXing, but
how can I do it?
Thanks a
[EMAIL PROTECTED] wrote:
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this possible at all? I imagine I have to resort to raw LaTeXing, but
how can I
Dear LyXers,
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this possible at all? I imagine I have to resort to raw LaTeXing, but
how can I do it?
Thanks a
[EMAIL PROTECTED] wrote:
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this possible at all? I imagine I have to resort to raw LaTeXing, but
how can I
Dear LyXers,
I am trying to work out a medium complicacy table. In
order to have a decent layout, I would like to turn hyphenation off
*inside* the table (and only _inside it_).
Is this possible at all? I imagine I have to resort to raw LaTeXing, but
how can I do it?
Thanks a
[EMAIL PROTECTED] wrote:
>
> I am trying to work out a medium complicacy table. In
> order to have a decent layout, I would like to turn hyphenation off
> *inside* the table (and only _inside it_).
>
> Is this possible at all? I imagine I have to resort to raw LaTeXing, but
>
Hi:
Can I join 2,3,4, table cells vertically in lyx 1.1.6?
Thanks in advanced.
__
Juan Ramn Rico - [EMAIL PROTECTED] - http://www.dlsi.ua.es/~juanra
Tel.: +34 96 590 34 00 ext. 2738
Fax: +34 96 590 93 26
Juan Ramon Rico wrote:
Hi:
Can I join 2,3,4, table cells vertically in lyx 1.1.6?
no, but you can insert a table in a table. let the first cell as it
is and insert in the horizontal neighbour-cell a table with 2,3,or 4
rows with one column, switch off the borders and you'll get want
Hi:
Can I join 2,3,4, table cells vertically in lyx 1.1.6?
Thanks in advanced.
__
Juan Ramn Rico - [EMAIL PROTECTED] - http://www.dlsi.ua.es/~juanra
Tel.: +34 96 590 34 00 ext. 2738
Fax: +34 96 590 93 26
Juan Ramon Rico wrote:
Hi:
Can I join 2,3,4, table cells vertically in lyx 1.1.6?
no, but you can insert a table in a table. let the first cell as it
is and insert in the horizontal neighbour-cell a table with 2,3,or 4
rows with one column, switch off the borders and you'll get want
Hi:
Can I join 2,3,4, table cells vertically in lyx 1.1.6?
Thanks in advanced.
__
Juan Ramón Rico - [EMAIL PROTECTED] - http://www.dlsi.ua.es/~juanra
Tel.: +34 96 590 34 00 ext. 2738
Fax: +34 96 590 93 26
Juan Ramon Rico wrote:
>
> Hi:
>
> Can I join 2,3,4, table cells vertically in lyx 1.1.6?
no, but you can insert a table in a table. let the first cell as it
is and insert in the horizontal neighbour-cell a table with 2,3,or 4
rows with one column, switch off the borders an
Adrian Ball wrote:
Dear all,
Sorry for asking yet another question (give me a few months to become more
expert, and I'll start contributing as well)...
I'm trying to create tables like the following:-
have a look at /usr/share/lyx/examples/TableExamples.lyx
mabe that the
On 24-Oct-2000 Adrian Ball wrote:
This is a cut down version of one of the least complicated instances of
what I'm trying to achieve. Basically, I need to be able to split and
combine cells vertically as above. I currently get around this by
removing all the horizontal lines, then using
Adrian Ball wrote:
Dear all,
Sorry for asking yet another question (give me a few months to become more
expert, and I'll start contributing as well)...
I'm trying to create tables like the following:-
have a look at /usr/share/lyx/examples/TableExamples.lyx
mabe that the
Juergen Vigna wrote:
Did you try to define the cells where you don't want a horizontal line
as multicolumn and then remove the line? This should work only for one
cell!
Herbert Voss wrote:
have a look at /usr/share/lyx/examples/TableExamples.lyx
mabe that the example-files in
On 24-Oct-2000 Adrian Ball wrote:
> This is a cut down version of one of the least complicated instances of
> what I'm trying to achieve. Basically, I need to be able to split and
> combine cells vertically as above. I currently get around this by
> removing all the horizontal lines, then
Adrian Ball wrote:
>
> Dear all,
>
> Sorry for asking yet another question (give me a few months to become more
> expert, and I'll start contributing as well)...
>
> I'm trying to create tables like the following:-
>
have a look at /usr/share/lyx/examples/TableExamples.lyx
mabe that the
Juergen Vigna wrote:
> Did you try to define the cells where you don't want a horizontal line
> as multicolumn and then remove the line? This should work only for one
> cell!
Herbert Voss wrote:
> have a look at /usr/share/lyx/examples/TableExamples.lyx
> mabe that the example-files in
I remember seeing this when I first created a table with a multicolumn on one
row. I had a hard time turning that left-edge off. I played with turning the
edges on and off a bunch of times until the dvi/ps output came out right. I
still can't get it to display right on the screen inside lyx
I remember seeing this when I first created a table with a multicolumn on one
row. I had a hard time turning that left-edge off. I played with turning the
edges on and off a bunch of times until the dvi/ps output came out right. I
still can't get it to display right on the screen inside lyx
I remember seeing this when I first created a table with a multicolumn on one
row. I had a hard time turning that left-edge off. I played with turning the
edges on and off a bunch of times until the dvi/ps output came out right. I
still can't get it to display right on the screen inside lyx
"Matthew" == Matthew Lovell [EMAIL PROTECTED] writes:
Matthew Hello, Has anyone noticed the following problem with LyX's
Matthew multicolumn support in tables?
[...]
Matthew It's a very minor complaint, indeed, but it does detract from
Matthew the final document. How does one report this
"Matthew" == Matthew Lovell [EMAIL PROTECTED] writes:
Matthew Hello, Has anyone noticed the following problem with LyX's
Matthew multicolumn support in tables?
[...]
Matthew It's a very minor complaint, indeed, but it does detract from
Matthew the final document. How does one report this
> "Matthew" == Matthew Lovell <[EMAIL PROTECTED]> writes:
Matthew> Hello, Has anyone noticed the following problem with LyX's
Matthew> multicolumn support in tables?
[...]
Matthew> It's a very minor complaint, indeed, but it does detract from
Matthew> the final document. How does one
Hello,
Has anyone noticed the following problem with LyX's multicolumn
support in tables?
Choose a table cell which already has the left-edge of the column
turned on. Change it to a multicolumn cell, spanning some number of
columns. Now, take a look in preview mode (I always use postscript)
101 - 200 of 202 matches
Mail list logo