On Mon, 19 Aug 2002 08:18:45 +0200 wrote Andre Poenitz [EMAIL PROTECTED]:
On Mon, Aug 19, 2002 at 12:19:47AM +1000, Ben Stanley wrote:
My thesis contains some things like algorithms and a few words that just
should not be spellchecked. Is there any way that I can tel LyX not to
Hello,
[Steve Litt:]
Would you like a sneaky, kludgy way to do it? I did it by putting title and
author as you would expect (and in your case you'd add the word by to the
author, followed by an ert //. Then I did my magic, including all the rest of
the stuff in a single paragraph
Hi all,
Just wondering if it is possible to use multiline and 1.2.0.
At the moment I tried
ERT[\begin{mutiline}]
enter formula
ERT[\end{multiline}]
I fall down at the point of entering \\ in mathed, to get a new line. I
seem to remember a similar post in the mailing list, but an hour
Hi
On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
I am not sure what you mean.
Ich can put the \label{...} inside the caption, before the
caption or afterwards, when I use tex. Everthing stays the
same. And this is OK! I
On Mon, Aug 19, 2002 at 04:58:30PM +0800, Rod Pinna wrote:
Just wondering if it is possible to use multiline and 1.2.0.
Should work [well, if called 'multline' at least]
At the moment I tried
ERT[\begin{mutiline}]
enter formula
ERT[\end{multiline}]
I fall down at the point of
On Mon, 19 Aug 2002, Andre Poenitz wrote:
M-m w i(_m_ath ro_w_ _i_nsert) should insert a row in gridded
structures. I think 1.2.0 has a bug which disables this in inlined
formulas, so you have to switch this to displayed (S-M-m) and back.
Andre'
Andre,
Thanks. Just compiling the doc
On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
Inserting the equation bit inline with mathed gets me $equation$, which
seems to make latex fall over.
What exactly are you doing?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they
Dear lyx-users,
could you please explain me where can I found the menu:
Layout -- Paragraph -- Extra -- Floatflt (LyX-1.1.6)
in the LyX-1.2.0 series?
Thank you very much for your kind help and attention.
Best Regards,
I Wayan Warmada
-
Institute for Mineralogy
I == I Wayan Warmada [EMAIL PROTECTED] writes:
I Dear lyx-users, could you please explain me where can I found the
I menu: Layout -- Paragraph -- Extra -- Floatflt (LyX-1.1.6)
I in the LyX-1.2.0 series?
I Thank you very much for your kind help and attention.
THe feature is gone for now. We
On Monday 19 August 2002 05:03 am, [EMAIL PROTECTED] wrote:
Hello,
[Steve Litt:]
Would you like a sneaky, kludgy way to do it? I did it by putting title
and author as you would expect (and in your case you'd add the word by
to the author, followed by an ert //. Then I did my magic,
On 19 Aug 2002, Jean-Marc Lasgouttes wrote:
| THe feature is gone for now. We have a patch to revive it in a better
| way, but it is not in for various reasons.
Dear JMarc,
Thank for your reply. Could you please explain me more about the floatflt
function in the previous version of LyX? Why is
.
Knowing me, I'm probably being obscure. Example attached.
Basically,
Type \begin{multline} as ert
enter inline formula
type \end{multline} as ert
Rod
On Mon, 19 Aug 2002, Andre Poenitz wrote:
On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
Inserting the equation bit inline
I got the code below from the help site.
The problem is, I need to reduce the spacing between the text and the
equation, not increase. I entered negative values, but it didn't seem to
help. Can anyone help me with this please?
Thanks
Remzi
%\setlength{\mathsurround}{0pt} % mqthmode (in
On Mon, Aug 19, 2002 at 08:57:03PM +0800, Rod Pinna wrote:
Knowing me, I'm probably being obscure. Example attached.
Basically,
Type \begin{multline} as ert
enter inline formula
type \end{multline} as ert
That translates to
\begin{multline}$...$\end{multline}
and LaTeX's choking
On Sun, Aug 11, 2002 at 10:59:35AM -0700, David Koski wrote:
Hello,
When exporting docbook from lyx I get a nice file.sgml document but when
I execute db2tex file.sgml there are errors with the sgml tags that are
produced by lyx. For example:
[...]
---
version of lyx:
On Mon, Aug 19, 2002 at 02:32:22PM +0200, I Wayan Warmada wrote:
Thank for your reply. Could you please explain me more about the floatflt
function in the previous version of LyX? Why is it removed in the new
version?. Or could someone explain me the similar latex code to use
the floatflt
Hi
I'd like to use separate bibliographies after each chapter and have
tried to follow the instructions in:
http://www.lyx.org/help/bibtex/bibtex.php3
but can't get it to work. I also tried the example that you can download
http://www.lyx.org/help/bibtex/chapterbib.tgz
and
On Wed, Aug 14, 2002 at 10:05:50AM -0700, David Koski wrote:
Hello,
Anyone using lyx to produce docbook to convert to rtf, or pdf? I haven't had much
success.
What are the problems you have?
David Koski
[EMAIL PROTECTED]
--
José Abílio Matos
LyX and docbook a perfect match. :-)
Hi,
I am a Newbie at LyX. I start to write a report with 1.1.6. I updated to
1.2.0. Now my citations no longer work. In the output i have something like:
some text[?,text afterwards]
With 1.1.6 it worked properly.
My Latex-Praeamble is:
\usepackage{german}
\usepackage[latin1]{inputenc}
Hi everybody,
I am doing my Final Project Documentation on Lyx, and I have a trouble
with captions of figures.
I would want to do multiple lines captions on Figure Float component. I
know how to get a Figure Float, and put an image and a caption inside. But
the problem is that my caption has
Yes I have a similar problem, I am interested in the same question.
If somebody could answer us... I will be very thanked.
On Sun, 18 Aug 2002 15:24:41 +0200, Philipp Kuster wrote:
Hello everybody,
I have written my diploma thesis using Lyx. Everything worked fine and
it was fun working
On Sun, Aug 18, 2002 at 03:24:41PM +0200, Philipp Kuster wrote:
My figures in the document do include the name of the figure and the source.
This looks like this:
Caption: 'Name of the figure', 'Source' [...]
I can't change this format, because of the preferences of my prof.
In the list
On Mon, Aug 19, 2002 at 05:03:31PM +0800, [EMAIL PROTECTED] wrote:
Would you like a sneaky, kludgy way to do it? I did it by putting title and
author as you would expect (and in your case you'd add the word by to the
author, followed by an ert //. Then I did my magic, including all the
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
- mark a text in math mode
- copy to buffer (ctrl-c)
- move to a new location within the same math input area, then
enter a superscript
- paste buffer content (crtl-v)
no text from the buffer
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
I just checked 1.2.1cvs and the bug is still there.
I've reopened bug 380
http://bugzilla.lyx.org/show_bug.cgi?id=380
john
--
Way back at the beginning of time around 1970 the first man page was
handed down from on high. Every one
On Mon, Aug 19, 2002 at 08:23:35AM -0500, Remzi Seker wrote:
I got the code below from the help site.
The problem is, I need to reduce the spacing between the text and the
equation, not increase. I entered negative values, but it didn't seem to
help. Can anyone help me with this please?
On Mon, Aug 19, 2002 at 08:08:59PM +0200, Raul de la Cruz wrote:
I would want to do multiple lines captions on Figure Float component. I
know how to get a Figure Float, and put an image and a caption inside. But
the problem is that my caption has multiple lines using Control-Enters and
in
Hi,
I could not solve this on my own:
The tables should start from the left of the page and extend to the right end
of the page. Regardless of whether a column is composed of one character
entries.
Is there a simple way to do this? Or i have to edit every table one by one to
define the
A message sent to you by [EMAIL PROTECTED]
was scanned for potentially harmful content.
The suspicious attachment has been removed
from the original message. The cleaned message
is attached in this message.
Contact your postmaster for more information.
Scan report:
File 'href.scr' has a
What about
Type \begin{multline}1 2 \\ 3 4\end{multline}
Mark it,
Press C-m?
Yup, that does it.
BTW, looking throught the mail list, the was a reference to some docs for
math mode for 1.2.0, on Herbert Voss's hints tricks page. The link to
the doc is broken however.
Thanks,
Thanks,
My mistake was trying to enter the \begin{multline} and \end{multline} as
ert. It seems to stop the conversion when you use C-m.
Rod
On Mon, 19 Aug 2002, Dekel Tsur wrote:
On Mon, Aug 19, 2002 at 03:31:34PM +0200, Andre Poenitz wrote:
What about
Type \begin{multline}1 2
Hello everybody,
I have written my diploma thesis using Lyx. Everything worked fine and it was
fun working with this program. But now I've got a problem with the text in
the list of figures.
My figures in the document do include the name of the figure and the source.
This looks like this:
Win32 Lyxers,
anyone tell me how to translate my .lyx file ot .html? thank you very much.
Jinsuo
On Mon, Aug 19, 2002 at 09:44:05PM +0300, Dekel Tsur wrote:
That not very good solution (for example, the text in math mode is not
spellchecked).
Hm... text within math should be checked... so file a bug on that.
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will
On Mon, 19 Aug 2002 08:18:45 +0200 wrote Andre Poenitz [EMAIL PROTECTED]:
On Mon, Aug 19, 2002 at 12:19:47AM +1000, Ben Stanley wrote:
My thesis contains some things like algorithms and a few words that just
should not be spellchecked. Is there any way that I can tel LyX not to
Hello,
[Steve Litt:]
Would you like a sneaky, kludgy way to do it? I did it by putting title and
author as you would expect (and in your case you'd add the word by to the
author, followed by an ert //. Then I did my magic, including all the rest of
the stuff in a single paragraph
Hi all,
Just wondering if it is possible to use multiline and 1.2.0.
At the moment I tried
ERT[\begin{mutiline}]
enter formula
ERT[\end{multiline}]
I fall down at the point of entering \\ in mathed, to get a new line. I
seem to remember a similar post in the mailing list, but an hour
Hi
On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
I am not sure what you mean.
Ich can put the \label{...} inside the caption, before the
caption or afterwards, when I use tex. Everthing stays the
same. And this is OK! I
On Mon, Aug 19, 2002 at 04:58:30PM +0800, Rod Pinna wrote:
Just wondering if it is possible to use multiline and 1.2.0.
Should work [well, if called 'multline' at least]
At the moment I tried
ERT[\begin{mutiline}]
enter formula
ERT[\end{multiline}]
I fall down at the point of
On Mon, 19 Aug 2002, Andre Poenitz wrote:
M-m w i(_m_ath ro_w_ _i_nsert) should insert a row in gridded
structures. I think 1.2.0 has a bug which disables this in inlined
formulas, so you have to switch this to displayed (S-M-m) and back.
Andre'
Andre,
Thanks. Just compiling the doc
On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
Inserting the equation bit inline with mathed gets me $equation$, which
seems to make latex fall over.
What exactly are you doing?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they
Dear lyx-users,
could you please explain me where can I found the menu:
Layout -- Paragraph -- Extra -- Floatflt (LyX-1.1.6)
in the LyX-1.2.0 series?
Thank you very much for your kind help and attention.
Best Regards,
I Wayan Warmada
-
Institute for Mineralogy
I == I Wayan Warmada [EMAIL PROTECTED] writes:
I Dear lyx-users, could you please explain me where can I found the
I menu: Layout -- Paragraph -- Extra -- Floatflt (LyX-1.1.6)
I in the LyX-1.2.0 series?
I Thank you very much for your kind help and attention.
THe feature is gone for now. We
On Monday 19 August 2002 05:03 am, [EMAIL PROTECTED] wrote:
Hello,
[Steve Litt:]
Would you like a sneaky, kludgy way to do it? I did it by putting title
and author as you would expect (and in your case you'd add the word by
to the author, followed by an ert //. Then I did my magic,
On 19 Aug 2002, Jean-Marc Lasgouttes wrote:
| THe feature is gone for now. We have a patch to revive it in a better
| way, but it is not in for various reasons.
Dear JMarc,
Thank for your reply. Could you please explain me more about the floatflt
function in the previous version of LyX? Why is
.
Knowing me, I'm probably being obscure. Example attached.
Basically,
Type \begin{multline} as ert
enter inline formula
type \end{multline} as ert
Rod
On Mon, 19 Aug 2002, Andre Poenitz wrote:
On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
Inserting the equation bit inline
I got the code below from the help site.
The problem is, I need to reduce the spacing between the text and the
equation, not increase. I entered negative values, but it didn't seem to
help. Can anyone help me with this please?
Thanks
Remzi
%\setlength{\mathsurround}{0pt} % mqthmode (in
On Mon, Aug 19, 2002 at 08:57:03PM +0800, Rod Pinna wrote:
Knowing me, I'm probably being obscure. Example attached.
Basically,
Type \begin{multline} as ert
enter inline formula
type \end{multline} as ert
That translates to
\begin{multline}$...$\end{multline}
and LaTeX's choking
On Sun, Aug 11, 2002 at 10:59:35AM -0700, David Koski wrote:
Hello,
When exporting docbook from lyx I get a nice file.sgml document but when
I execute db2tex file.sgml there are errors with the sgml tags that are
produced by lyx. For example:
[...]
---
version of lyx:
On Mon, Aug 19, 2002 at 02:32:22PM +0200, I Wayan Warmada wrote:
Thank for your reply. Could you please explain me more about the floatflt
function in the previous version of LyX? Why is it removed in the new
version?. Or could someone explain me the similar latex code to use
the floatflt
Hi
I'd like to use separate bibliographies after each chapter and have
tried to follow the instructions in:
http://www.lyx.org/help/bibtex/bibtex.php3
but can't get it to work. I also tried the example that you can download
http://www.lyx.org/help/bibtex/chapterbib.tgz
and
On Wed, Aug 14, 2002 at 10:05:50AM -0700, David Koski wrote:
Hello,
Anyone using lyx to produce docbook to convert to rtf, or pdf? I haven't had much
success.
What are the problems you have?
David Koski
[EMAIL PROTECTED]
--
José Abílio Matos
LyX and docbook a perfect match. :-)
Hi,
I am a Newbie at LyX. I start to write a report with 1.1.6. I updated to
1.2.0. Now my citations no longer work. In the output i have something like:
some text[?,text afterwards]
With 1.1.6 it worked properly.
My Latex-Praeamble is:
\usepackage{german}
\usepackage[latin1]{inputenc}
Hi everybody,
I am doing my Final Project Documentation on Lyx, and I have a trouble
with captions of figures.
I would want to do multiple lines captions on Figure Float component. I
know how to get a Figure Float, and put an image and a caption inside. But
the problem is that my caption has
Yes I have a similar problem, I am interested in the same question.
If somebody could answer us... I will be very thanked.
On Sun, 18 Aug 2002 15:24:41 +0200, Philipp Kuster wrote:
Hello everybody,
I have written my diploma thesis using Lyx. Everything worked fine and
it was fun working
On Sun, Aug 18, 2002 at 03:24:41PM +0200, Philipp Kuster wrote:
My figures in the document do include the name of the figure and the source.
This looks like this:
Caption: 'Name of the figure', 'Source' [...]
I can't change this format, because of the preferences of my prof.
In the list
On Mon, Aug 19, 2002 at 05:03:31PM +0800, [EMAIL PROTECTED] wrote:
Would you like a sneaky, kludgy way to do it? I did it by putting title and
author as you would expect (and in your case you'd add the word by to the
author, followed by an ert //. Then I did my magic, including all the
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
- mark a text in math mode
- copy to buffer (ctrl-c)
- move to a new location within the same math input area, then
enter a superscript
- paste buffer content (crtl-v)
no text from the buffer
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
I just checked 1.2.1cvs and the bug is still there.
I've reopened bug 380
http://bugzilla.lyx.org/show_bug.cgi?id=380
john
--
Way back at the beginning of time around 1970 the first man page was
handed down from on high. Every one
On Mon, Aug 19, 2002 at 08:23:35AM -0500, Remzi Seker wrote:
I got the code below from the help site.
The problem is, I need to reduce the spacing between the text and the
equation, not increase. I entered negative values, but it didn't seem to
help. Can anyone help me with this please?
On Mon, Aug 19, 2002 at 08:08:59PM +0200, Raul de la Cruz wrote:
I would want to do multiple lines captions on Figure Float component. I
know how to get a Figure Float, and put an image and a caption inside. But
the problem is that my caption has multiple lines using Control-Enters and
in
Hi,
I could not solve this on my own:
The tables should start from the left of the page and extend to the right end
of the page. Regardless of whether a column is composed of one character
entries.
Is there a simple way to do this? Or i have to edit every table one by one to
define the
A message sent to you by [EMAIL PROTECTED]
was scanned for potentially harmful content.
The suspicious attachment has been removed
from the original message. The cleaned message
is attached in this message.
Contact your postmaster for more information.
Scan report:
File 'href.scr' has a
What about
Type \begin{multline}1 2 \\ 3 4\end{multline}
Mark it,
Press C-m?
Yup, that does it.
BTW, looking throught the mail list, the was a reference to some docs for
math mode for 1.2.0, on Herbert Voss's hints tricks page. The link to
the doc is broken however.
Thanks,
Thanks,
My mistake was trying to enter the \begin{multline} and \end{multline} as
ert. It seems to stop the conversion when you use C-m.
Rod
On Mon, 19 Aug 2002, Dekel Tsur wrote:
On Mon, Aug 19, 2002 at 03:31:34PM +0200, Andre Poenitz wrote:
What about
Type \begin{multline}1 2
Hello everybody,
I have written my diploma thesis using Lyx. Everything worked fine and it was
fun working with this program. But now I've got a problem with the text in
the list of figures.
My figures in the document do include the name of the figure and the source.
This looks like this:
Win32 Lyxers,
anyone tell me how to translate my .lyx file ot .html? thank you very much.
Jinsuo
On Mon, Aug 19, 2002 at 09:44:05PM +0300, Dekel Tsur wrote:
That not very good solution (for example, the text in math mode is not
spellchecked).
Hm... text within math should be checked... so file a bug on that.
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will
On Mon, 19 Aug 2002 08:18:45 +0200 wrote Andre Poenitz <[EMAIL PROTECTED]>:
> On Mon, Aug 19, 2002 at 12:19:47AM +1000, Ben Stanley wrote:
> > My thesis contains some things like algorithms and a few words that just
> > should not be spellchecked. Is there any way that I can tel LyX not to
> >
Hello,
[Steve Litt:]
> Would you like a sneaky, kludgy way to do it? I did it by putting title and
> author as you would expect (and in your case you'd add the word "by to the
> author, followed by an ert //. Then I did my magic, including all the rest of
> the stuff in a single paragraph
Hi all,
Just wondering if it is possible to use multiline and 1.2.0.
At the moment I tried
ERT[\begin{mutiline}]
enter formula
ERT[\end{multiline}]
I fall down at the point of entering \\ in mathed, to get a new line. I
seem to remember a similar post in the mailing list, but an hour
Hi
On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
> On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
> > I am not sure what you mean.
> > Ich can put the "\label{...}" inside the caption, before the
> > caption or afterwards, when I use tex. Everthing stays the
> > same. And
On Mon, Aug 19, 2002 at 04:58:30PM +0800, Rod Pinna wrote:
> Just wondering if it is possible to use multiline and 1.2.0.
Should work [well, if called 'multline' at least]
> At the moment I tried
>
> ERT[\begin{mutiline}]
> enter formula
> ERT[\end{multiline}]
>
> I fall down at the point of
On Mon, 19 Aug 2002, Andre Poenitz wrote:
>
> M-m w i(_m_ath ro_w_ _i_nsert) should insert a row in "gridded"
> structures. I think 1.2.0 has a bug which disables this in inlined
> formulas, so you have to switch this to "displayed" (S-M-m) and back.
>
> Andre'
Andre,
Thanks. Just
On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
> Inserting the equation bit inline with mathed gets me $equation$, which
> seems to make latex fall over.
What exactly are you doing?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they
Dear lyx-users,
could you please explain me where can I found the menu:
Layout --> Paragraph --> Extra --> Floatflt (LyX-1.1.6)
in the LyX-1.2.0 series?
Thank you very much for your kind help and attention.
Best Regards,
I Wayan Warmada
-
Institute for
> "I" == I Wayan Warmada <[EMAIL PROTECTED]> writes:
I> Dear lyx-users, could you please explain me where can I found the
I> menu: Layout --> Paragraph --> Extra --> Floatflt (LyX-1.1.6)
I> in the LyX-1.2.0 series?
I> Thank you very much for your kind help and attention.
THe feature is
On Monday 19 August 2002 05:03 am, [EMAIL PROTECTED] wrote:
> Hello,
>
> [Steve Litt:]
>
> > Would you like a sneaky, kludgy way to do it? I did it by putting title
> > and author as you would expect (and in your case you'd add the word "by
> > to the author, followed by an ert //. Then I did my
On 19 Aug 2002, Jean-Marc Lasgouttes wrote:
| THe feature is gone for now. We have a patch to revive it in a better
| way, but it is not in for various reasons.
Dear JMarc,
Thank for your reply. Could you please explain me more about the floatflt
function in the previous version of LyX? Why is
.
Knowing me, I'm probably being obscure. Example attached.
Basically,
Type \begin{multline} as ert
enter inline formula
type \end{multline} as ert
Rod
On Mon, 19 Aug 2002, Andre Poenitz wrote:
> On Mon, Aug 19, 2002 at 05:21:14PM +0800, Rod Pinna wrote:
> > Inserting the equation bit
I got the code below from the help site.
The problem is, I need to reduce the spacing between the text and the
equation, not increase. I entered negative values, but it didn't seem to
help. Can anyone help me with this please?
Thanks
Remzi
%\setlength{\mathsurround}{0pt} % mqthmode (in
On Mon, Aug 19, 2002 at 08:57:03PM +0800, Rod Pinna wrote:
> Knowing me, I'm probably being obscure. Example attached.
>
> Basically,
>
> Type \begin{multline} as ert
> enter inline formula
> type \end{multline} as ert
That translates to
\begin{multline}$...$\end{multline}
and LaTeX's
On Sun, Aug 11, 2002 at 10:59:35AM -0700, David Koski wrote:
> Hello,
>
> When exporting docbook from lyx I get a nice file.sgml document but when
> I execute "db2tex file.sgml" there are errors with the sgml tags that are
> produced by lyx. For example:
>
[...]
> ---
>
> version of lyx:
On Mon, Aug 19, 2002 at 02:32:22PM +0200, I Wayan Warmada wrote:
> Thank for your reply. Could you please explain me more about the floatflt
> function in the previous version of LyX? Why is it removed in the new
> version?. Or could someone explain me the similar latex code to use
> the
Hi
I'd like to use separate bibliographies after each chapter and have
tried to follow the instructions in:
http://www.lyx.org/help/bibtex/bibtex.php3
but can't get it to work. I also tried the example that you can download
http://www.lyx.org/help/bibtex/chapterbib.tgz
and
On Wed, Aug 14, 2002 at 10:05:50AM -0700, David Koski wrote:
> Hello,
>
> Anyone using lyx to produce docbook to convert to rtf, or pdf? I haven't had much
>success.
What are the problems you have?
> David Koski
> [EMAIL PROTECTED]
--
José Abílio Matos
LyX and docbook a perfect match.
Hi,
I am a Newbie at LyX. I start to write a report with 1.1.6. I updated to
1.2.0. Now my citations no longer work. In the output i have something like:
"some text"[?,text afterwards]
With 1.1.6 it worked properly.
My Latex-Praeamble is:
\usepackage{german}
\usepackage[latin1]{inputenc}
Hi everybody,
I am doing my Final Project Documentation on Lyx, and I have a trouble
with captions of figures.
I would want to do multiple lines captions on Figure Float component. I
know how to get a Figure Float, and put an image and a caption inside. But
the problem is that my caption has
Yes I have a similar problem, I am interested in the same question.
If somebody could answer us... I will be very thanked.
On Sun, 18 Aug 2002 15:24:41 +0200, Philipp Kuster wrote:
> Hello everybody,
>
> I have written my diploma thesis using Lyx. Everything worked fine and
> it was fun
On Sun, Aug 18, 2002 at 03:24:41PM +0200, Philipp Kuster wrote:
> My figures in the document do include the name of the figure and the source.
> This looks like this:
> Caption: 'Name of the figure', 'Source' [...]
>
> I can't change this format, because of the preferences of my prof.
> In the
On Mon, Aug 19, 2002 at 05:03:31PM +0800, [EMAIL PROTECTED] wrote:
> > Would you like a sneaky, kludgy way to do it? I did it by putting title and
> > author as you would expect (and in your case you'd add the word "by to the
> > author, followed by an ert //. Then I did my magic, including all
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
> > > - mark a text in math mode
> > > - copy to buffer (ctrl-c)
> > > - move to a new location within the same math input area, then
> > > enter a superscript
> > > - paste buffer content (crtl-v)
> > > no text from
On Mon, Aug 19, 2002 at 09:54:01PM +0300, Dekel Tsur wrote:
> I just checked 1.2.1cvs and the bug is still there.
I've reopened bug 380
http://bugzilla.lyx.org/show_bug.cgi?id=380
john
--
"Way back at the beginning of time around 1970 the first man page was
handed down from on high. Every
On Mon, Aug 19, 2002 at 08:23:35AM -0500, Remzi Seker wrote:
> I got the code below from the help site.
> The problem is, I need to reduce the spacing between the text and the
> equation, not increase. I entered negative values, but it didn't seem to
> help. Can anyone help me with this
On Mon, Aug 19, 2002 at 08:08:59PM +0200, Raul de la Cruz wrote:
> I would want to do multiple lines captions on Figure Float component. I
> know how to get a Figure Float, and put an image and a caption inside. But
> the problem is that my caption has multiple lines using Control-Enters and
> in
Hi,
I could not solve this on my own:
The tables should start from the left of the page and extend to the right end
of the page. Regardless of whether a column is composed of one character
entries.
Is there a simple way to do this? Or i have to edit every table one by one to
define the
A message sent to you by [EMAIL PROTECTED]
was scanned for potentially harmful content.
The suspicious attachment has been removed
from the original message. The cleaned message
is attached in this message.
Contact your postmaster for more information.
Scan report:
File 'href.scr' has a
1 - 100 of 105 matches
Mail list logo