Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
--
Jean-Pierre
Jean-Pierre Chrétien wrote:
Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
Hi,
First, congratulations for the work to the translation team.
A few comments /
Hi! I was trying to set a table so that it takes the entire column of my
document. I have 4 columns, so I selected each entire column and I set the width
as 20% of the text width. The problem is that, at the end, the table doesn't
take 100% of the text width, but it takes far more. Am I doing
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end{document}.*
*
*
I have installed MacTex2008 and with other documents I can
vinc...@alice.it wrote:
Does anyone of you know how to do this?
you probably want to look on latex ledpar package; lyx does not have support
for it and it would be imho better to do the whole thing in pure latex.
pavel
On Oct 12, 2009, at 4:24 AM, Nicola Molinari wrote:
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I
have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end
{document}.*
*
*
On Oct 12, 2009, at 3:59 AM, Luca Carlon wrote:
Hi! I was trying to set a table so that it takes the entire column
of my
document. I have 4 columns, so I selected each entire column and I
set the width
as 20% of the text width. The problem is that, at the end, the table
doesn't
take 100%
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Use smaller fonts, or short lines?
Sam
In order to explain better, I have a main file with links to the other
chapters.
If I compile the singles chapters the DVI files work.
The problem is when I try to compile the main file.
Maybe it's more clear now.
**Input:Bibliografia.lyx
**
** \pagestyle{plain}
**
** \cleardoublepage
**
James C. Sutherland james.sutherl...@... writes:
I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
of LyX are you using? What platform/OS are you on? Can you post a
minimal example?
I don't know how to post an attachment here. I can post the Latex code. Is this
ok?
On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
James C. Sutherland james.sutherl...@... writes:
I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
of LyX are you using? What platform/OS are you on? Can you post a
minimal example?
I don't know how to post an attachment
Yes, the attached works. I attach the LyX file from which I took the latex
source I gave you and the PDF is the result.
On Mon, Oct 12, 2009 at 6:22 PM, James C. Sutherland
james.sutherl...@utah.edu wrote:
On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
James C. Sutherland
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
On Oct 12, 2009, at 10:59 AM, Luca Carlon wrote:
Yes, the attached
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections. I have done the formating with the package
titlesec. My document class is report [koma]. The only solution I
On 10/12/2009 06:28 PM, Axel wrote:
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections.
How much depth do you need? Are you using paragraph and
Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
--
Jean-Pierre
Jean-Pierre Chrétien wrote:
Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
Hi,
First, congratulations for the work to the translation team.
A few comments /
Hi! I was trying to set a table so that it takes the entire column of my
document. I have 4 columns, so I selected each entire column and I set the width
as 20% of the text width. The problem is that, at the end, the table doesn't
take 100% of the text width, but it takes far more. Am I doing
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end{document}.*
*
*
I have installed MacTex2008 and with other documents I can
vinc...@alice.it wrote:
Does anyone of you know how to do this?
you probably want to look on latex ledpar package; lyx does not have support
for it and it would be imho better to do the whole thing in pure latex.
pavel
On Oct 12, 2009, at 4:24 AM, Nicola Molinari wrote:
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I
have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end
{document}.*
*
*
On Oct 12, 2009, at 3:59 AM, Luca Carlon wrote:
Hi! I was trying to set a table so that it takes the entire column
of my
document. I have 4 columns, so I selected each entire column and I
set the width
as 20% of the text width. The problem is that, at the end, the table
doesn't
take 100%
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Use smaller fonts, or short lines?
Sam
In order to explain better, I have a main file with links to the other
chapters.
If I compile the singles chapters the DVI files work.
The problem is when I try to compile the main file.
Maybe it's more clear now.
**Input:Bibliografia.lyx
**
** \pagestyle{plain}
**
** \cleardoublepage
**
James C. Sutherland james.sutherl...@... writes:
I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
of LyX are you using? What platform/OS are you on? Can you post a
minimal example?
I don't know how to post an attachment here. I can post the Latex code. Is this
ok?
On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
James C. Sutherland james.sutherl...@... writes:
I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
of LyX are you using? What platform/OS are you on? Can you post a
minimal example?
I don't know how to post an attachment
Yes, the attached works. I attach the LyX file from which I took the latex
source I gave you and the PDF is the result.
On Mon, Oct 12, 2009 at 6:22 PM, James C. Sutherland
james.sutherl...@utah.edu wrote:
On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
James C. Sutherland
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
On Oct 12, 2009, at 10:59 AM, Luca Carlon wrote:
Yes, the attached
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections. I have done the formating with the package
titlesec. My document class is report [koma]. The only solution I
On 10/12/2009 06:28 PM, Axel wrote:
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections.
How much depth do you need? Are you using paragraph and
Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
--
Jean-Pierre
Jean-Pierre Chrétien wrote:
Hello,
The translation is quite complete and up to date, thanks to Siegfried
and Alain:
http://www.lyx.org/SiteTranslation#toc5
http://www.lyx.org/WebFr.Home
Happy reading!
Hi,
First, congratulations for the work to the translation team.
A few comments /
Hi! I was trying to set a table so that it takes the entire column of my
document. I have 4 columns, so I selected each entire column and I set the width
as 20% of the text width. The problem is that, at the end, the table doesn't
take 100% of the text width, but it takes far more. Am I doing
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end{document}.*
*
*
I have installed MacTex2008 and with other documents I can
vinc...@alice.it wrote:
> Does anyone of you know how to do this?
you probably want to look on latex ledpar package; lyx does not have support
for it and it would be imho better to do the whole thing in pure latex.
pavel
On Oct 12, 2009, at 4:24 AM, Nicola Molinari wrote:
Dear Sir or Madam,
I'm writing my thesis with LyX (version 1.6.4.1 for Mac OS) but I
have a
problem when I try to compile the DVI file.
The error message is:
*LaTeX Error: \begin{itemize} on input line 313 ended by \end
{document}.*
*
*
On Oct 12, 2009, at 3:59 AM, Luca Carlon wrote:
Hi! I was trying to set a table so that it takes the entire column
of my
document. I have 4 columns, so I selected each entire column and I
set the width
as 20% of the text width. The problem is that, at the end, the table
doesn't
take 100%
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Regards
Sajjad
* Sajjad wrote, On 12/10/09 14:08:
Hello forum,
I want to write pseudo-code and i am doing that inside the program listing.
But when i generate the pdf , the code are cropped sideways.
Any hint to get around that issue?
Use smaller fonts, or short lines?
Sam
In order to explain better, I have a main file with links to the other
chapters.
If I compile the singles chapters the DVI files work.
The problem is when I try to compile the main file.
Maybe it's more clear now.
**Input:Bibliografia.lyx
**
** \pagestyle{plain}
**
** \cleardoublepage
**
James C. Sutherland writes:
> I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
> of LyX are you using? What platform/OS are you on? Can you post a
> minimal example?
I don't know how to post an attachment here. I can post the Latex code. Is this
On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
James C. Sutherland writes:
I cannot duplicate this with 1.6.4.1 on Mac OSX 10.6.1. What version
of LyX are you using? What platform/OS are you on? Can you post a
minimal example?
I don't know how to post an
Yes, the attached works. I attach the LyX file from which I took the latex
source I gave you and the PDF is the result.
On Mon, Oct 12, 2009 at 6:22 PM, James C. Sutherland <
james.sutherl...@utah.edu> wrote:
>
> On Oct 12, 2009, at 10:12 AM, Luca Carlon wrote:
>
> James C. Sutherland
Ahh. You are indeed correct. I can verify that the table over-runs
the page margins. I suspect that this may be a LaTeX problem rather
than a LyX problem, but the LaTeX gurus on the list would need to
verify that.
On Oct 12, 2009, at 10:59 AM, Luca Carlon wrote:
Yes, the attached
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections. I have done the formating with the package
titlesec. My document class is report [koma]. The only solution I
On 10/12/2009 06:28 PM, Axel wrote:
Hello,
I have a problem with the sectioning in Lyx, as the standard sectioning
depth of Lyx is barely enough for german law papers. I need to use \chapter
and \part as additional sections.
How much depth do you need? Are you using paragraph and
48 matches
Mail list logo