[EMAIL PROTECTED] a écrit :
Also, I don't read these lists, but I assume that someone has noted that there
doesn't seem to be any way to insert vertical space, at least in version 1.4.1
for Windows. (The commands used to be on the Layout|Paragraph menu.)
Menu Insert-Special
Thanks to Jean-Pierre, here is the solution. I post it here for future
reference :
Lyx cannot use utf8 (yet). So, the charset ISO-8859-1 has to be available for
your locale. For example, if you're using fr_FR (Language = French, Country =
France) ,
$ locale -a | grep fr_FR
should show
Stephen Harris wrote:
Jim Easter wrote:
LyX 1.3.7 works fine for me under Windows XP, with or without a network
connection. Not so for LyX 1.4.1.
When I unplug from or disable the LAN, LyX fails to launch, with an
error screen
up for a split-second.
After several quick-draw attempts, I was
Hello,
I installed LYX 1.4.1 with the lyx-1.4.1_win32_setup_v1.exe.
I cannot start LYX, but I get the error-window Error with reading
the configuration file lyxrc.defaults. Please check your
installation.
What has happened or failed? What do I have to do?
I have LYX 1.3.7 on my pc, the other
How do I get the German letter ß (eszett) to appear? When I type \ss in
ERT by itself, I get it, but typing the same thing in the middle of a
German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
What am I doing wrong?
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle of
a German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
Sara Stymne wrote:
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle of
a German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt
Or simply put a space between the \ss and the following character
(whether the space is inside ERT or outside doesn't matter). As in:
drau\ss en. LyX will interpret the space as the end of the command,
draußen.
This is an inconsistency with many of the symbol commands. For
example,
Thanks Sara, Georg, and Maria
On Wednesday, April 19, 2006, at 12:56 PM, Georg Baum wrote:
Sara Stymne wrote:
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle
of
a German word
Maria Gouskova wrote:
This is an inconsistency with many of the symbol commands. For
example, \textglotstop for the glottal stop character (in TIPA) needs
to be followed by a space or {}, but \textipa{?} does not, since it
has brackets. Accented characters, on the other hand, work without a
Hi,
I'm using the default LyX bibliography (it's the only one that doesn't
give me errors), in the Report document class.
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
Thanks!
-Jesse
jesse mejia wrote:
Hi,
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
I just had a similar problem and found a solution.
Put this in the preamble:
[EMAIL PROTECTED]
and replace $\bullet$ with whatever
Hi,
I am submitting a document which must have my student number at the
top right of each page. What is the easiest way to do this? I don't
need anything else at the top, just the number.
Tim
Am Mittwoch, 19. April 2006 16:02 schrieb Nicolas Dubuit:
$ locale -a | grep fr_FR
should show something like
fr_FR
fr_FR.iso88591
fr_FR.utf8
If the iso88591 line is missing, you have to re-generate the locales.
For (k)ubuntu and debian, this is done with
$ sudo dpkg-reconfigure
Am Mittwoch, 19. April 2006 22:09 schrieb Christopher Winkler:
the easiest thing you can do without screwing your whole locale-setting
is to start lyx with the command: LANG=fr_FR lyx
That should work and you can leave the rest of your system running on
utf-8.
That procedure is safe, but
On Wed, Apr 19, 2006 at 08:57:34PM +0100, Tim Vaughan wrote:
Hi,
I am submitting a document which must have my student number at the
top right of each page. What is the easiest way to do this? I don't
need anything else at the top, just the number.
Tim
In the preamble for the document
On Wednesday 19 April 2006 04:25 am, Martin A. Hansen wrote:
hello
using komascript article i have chosen a double-sided document with fancy
headers.
because i include a coverpage using the eso-pic and graphicx packages, the
document has an extra page. this have the unwanted effect that the
Oisin C. Feeley wrote:
In the preamble for the document (LyX-Document-Layout-Preamble) add the
following:
\usepackage{fancyhdr}
\pagestyle{fancy}
\rhead{\bfseries 123456789}
In LyX, only the third line is necessary. In LyX 1.3.x, go to
Layout-Document...-Layout and set the Page style
\usepackage{wasysym} is written into the preamble by default. How do you
remove this so that double and triple integrals will be done with the AMS
package?
Thanks,
Matt Harris
On Wed, Apr 19, 2006 at 05:49:46PM -0400, Paul A. Rubin wrote:
Oisin C. Feeley wrote:
In the preamble for the document (LyX-Document-Layout-Preamble) add the
following:
\usepackage{fancyhdr}
\pagestyle{fancy}
\rhead{\bfseries 123456789}
In LyX, only the third line is necessary. In
solved.
it turns out that because i include a seperate coverpage using the graphicx
and eso packages, i get the pagenumber counter offset by 1. adjusting the
pagenumber fixes the layout.
btw, i see that clearpage and cleardoublepage both behaves correctly not
interferring with the layout in any
[EMAIL PROTECTED] a écrit :
Also, I don't read these lists, but I assume that someone has noted that there
doesn't seem to be any way to insert vertical space, at least in version 1.4.1
for Windows. (The commands used to be on the Layout|Paragraph menu.)
Menu Insert-Special
Thanks to Jean-Pierre, here is the solution. I post it here for future
reference :
Lyx cannot use utf8 (yet). So, the charset ISO-8859-1 has to be available for
your locale. For example, if you're using fr_FR (Language = French, Country =
France) ,
$ locale -a | grep fr_FR
should show
Stephen Harris wrote:
Jim Easter wrote:
LyX 1.3.7 works fine for me under Windows XP, with or without a network
connection. Not so for LyX 1.4.1.
When I unplug from or disable the LAN, LyX fails to launch, with an
error screen
up for a split-second.
After several quick-draw attempts, I was
Hello,
I installed LYX 1.4.1 with the lyx-1.4.1_win32_setup_v1.exe.
I cannot start LYX, but I get the error-window Error with reading
the configuration file lyxrc.defaults. Please check your
installation.
What has happened or failed? What do I have to do?
I have LYX 1.3.7 on my pc, the other
How do I get the German letter ß (eszett) to appear? When I type \ss in
ERT by itself, I get it, but typing the same thing in the middle of a
German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
What am I doing wrong?
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle of
a German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
Sara Stymne wrote:
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle of
a German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt
Or simply put a space between the \ss and the following character
(whether the space is inside ERT or outside doesn't matter). As in:
drau\ss en. LyX will interpret the space as the end of the command,
draußen.
This is an inconsistency with many of the symbol commands. For
example,
Thanks Sara, Georg, and Maria
On Wednesday, April 19, 2006, at 12:56 PM, Georg Baum wrote:
Sara Stymne wrote:
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle
of
a German word
Maria Gouskova wrote:
This is an inconsistency with many of the symbol commands. For
example, \textglotstop for the glottal stop character (in TIPA) needs
to be followed by a space or {}, but \textipa{?} does not, since it
has brackets. Accented characters, on the other hand, work without a
Hi,
I'm using the default LyX bibliography (it's the only one that doesn't
give me errors), in the Report document class.
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
Thanks!
-Jesse
jesse mejia wrote:
Hi,
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
I just had a similar problem and found a solution.
Put this in the preamble:
[EMAIL PROTECTED]
and replace $\bullet$ with whatever
Hi,
I am submitting a document which must have my student number at the
top right of each page. What is the easiest way to do this? I don't
need anything else at the top, just the number.
Tim
Am Mittwoch, 19. April 2006 16:02 schrieb Nicolas Dubuit:
$ locale -a | grep fr_FR
should show something like
fr_FR
fr_FR.iso88591
fr_FR.utf8
If the iso88591 line is missing, you have to re-generate the locales.
For (k)ubuntu and debian, this is done with
$ sudo dpkg-reconfigure
Am Mittwoch, 19. April 2006 22:09 schrieb Christopher Winkler:
the easiest thing you can do without screwing your whole locale-setting
is to start lyx with the command: LANG=fr_FR lyx
That should work and you can leave the rest of your system running on
utf-8.
That procedure is safe, but
On Wed, Apr 19, 2006 at 08:57:34PM +0100, Tim Vaughan wrote:
Hi,
I am submitting a document which must have my student number at the
top right of each page. What is the easiest way to do this? I don't
need anything else at the top, just the number.
Tim
In the preamble for the document
On Wednesday 19 April 2006 04:25 am, Martin A. Hansen wrote:
hello
using komascript article i have chosen a double-sided document with fancy
headers.
because i include a coverpage using the eso-pic and graphicx packages, the
document has an extra page. this have the unwanted effect that the
Oisin C. Feeley wrote:
In the preamble for the document (LyX-Document-Layout-Preamble) add the
following:
\usepackage{fancyhdr}
\pagestyle{fancy}
\rhead{\bfseries 123456789}
In LyX, only the third line is necessary. In LyX 1.3.x, go to
Layout-Document...-Layout and set the Page style
\usepackage{wasysym} is written into the preamble by default. How do you
remove this so that double and triple integrals will be done with the AMS
package?
Thanks,
Matt Harris
On Wed, Apr 19, 2006 at 05:49:46PM -0400, Paul A. Rubin wrote:
Oisin C. Feeley wrote:
In the preamble for the document (LyX-Document-Layout-Preamble) add the
following:
\usepackage{fancyhdr}
\pagestyle{fancy}
\rhead{\bfseries 123456789}
In LyX, only the third line is necessary. In
solved.
it turns out that because i include a seperate coverpage using the graphicx
and eso packages, i get the pagenumber counter offset by 1. adjusting the
pagenumber fixes the layout.
btw, i see that clearpage and cleardoublepage both behaves correctly not
interferring with the layout in any
[EMAIL PROTECTED] a écrit :
Also, I don't read these lists, but I assume that someone has noted that there
doesn't seem to be any way to insert vertical space, at least in version 1.4.1
for Windows. (The commands used to be on the Layout|Paragraph menu.)
Menu Insert->Special
Thanks to Jean-Pierre, here is the solution. I post it here for future
reference :
Lyx cannot use utf8 (yet). So, the charset ISO-8859-1 has to be available for
your locale. For example, if you're using fr_FR (Language = French, Country =
France) ,
$ locale -a | grep fr_FR
should show
Stephen Harris wrote:
Jim Easter wrote:
LyX 1.3.7 works fine for me under Windows XP, with or without a network
connection. Not so for LyX 1.4.1.
When I unplug from or disable the LAN, LyX fails to launch, with an
error screen
up for a split-second.
After several quick-draw attempts, I was
Hello,
I installed LYX 1.4.1 with the lyx-1.4.1_win32_setup_v1.exe.
I cannot start LYX, but I get the error-window "Error with reading
the configuration file lyxrc.defaults. Please check your
installation".
What has happened or failed? What do I have to do?
I have LYX 1.3.7 on my pc, the other
How do I get the German letter ß (eszett) to appear? When I type \ss in
ERT by itself, I get it, but typing the same thing in the middle of a
German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
What am I doing wrong?
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle of
a German word gives me an error message like this: Undefined control
sequence.
...en Fassungen gewandelt hat. Anschlie\ssend
Sara Stymne wrote:
> Bruce Pourciau wrote:
>
>> How do I get the German letter ß (eszett) to appear? When I type \ss
>> in ERT by itself, I get it, but typing the same thing in the middle of
>> a German word gives me an error message like this: Undefined control
>> sequence.
>> ...en Fassungen
Or simply put a space between the \ss and the following character
(whether the space is inside ERT or outside doesn't matter). As in:
"drau\ss en". LyX will interpret the space as the end of the command,
draußen.
This is an inconsistency with many of the symbol commands. For
example,
Thanks Sara, Georg, and Maria
On Wednesday, April 19, 2006, at 12:56 PM, Georg Baum wrote:
Sara Stymne wrote:
Bruce Pourciau wrote:
How do I get the German letter ß (eszett) to appear? When I type \ss
in ERT by itself, I get it, but typing the same thing in the middle
of
a German word
Maria Gouskova wrote:
This is an inconsistency with many of the symbol commands. For
example, \textglotstop for the glottal stop character (in TIPA) needs
to be followed by a space or {}, but \textipa{?} does not, since it
has brackets. Accented characters, on the other hand, work without a
Hi,
I'm using the default LyX bibliography (it's the only one that doesn't
give me errors), in the Report document class.
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
Thanks!
-Jesse
jesse mejia wrote:
Hi,
How can I remove the column that outputs to the left of my sources on
the bibliography page that has the the source labels in brackets?
I just had a similar problem and found a solution.
Put this in the preamble:
[EMAIL PROTECTED]
and replace $\bullet$ with whatever
Hi,
I am submitting a document which must have my student number at the
top right of each page. What is the easiest way to do this? I don't
need anything else at the top, just the number.
Tim
Am Mittwoch, 19. April 2006 16:02 schrieb Nicolas Dubuit:
> $ locale -a | grep fr_FR
>
> should show something like
>
> fr_FR
> fr_FR.iso88591
> fr_FR.utf8
>
> If the iso88591 line is missing, you have to re-generate the locales.
> For (k)ubuntu and debian, this is done with
>
> $ sudo
Am Mittwoch, 19. April 2006 22:09 schrieb Christopher Winkler:
> the easiest thing you can do without screwing your whole locale-setting
> is to start lyx with the command: LANG=fr_FR lyx
> That should work and you can leave the rest of your system running on
> utf-8.
That procedure is safe,
On Wed, Apr 19, 2006 at 08:57:34PM +0100, Tim Vaughan wrote:
> Hi,
>
> I am submitting a document which must have my student number at the
> top right of each page. What is the easiest way to do this? I don't
> need anything else at the top, just the number.
>
> Tim
In the preamble for the
On Wednesday 19 April 2006 04:25 am, Martin A. Hansen wrote:
> hello
>
> using komascript article i have chosen a double-sided document with fancy
> headers.
>
> because i include a coverpage using the eso-pic and graphicx packages, the
> document has an "extra page". this have the unwanted effect
Oisin C. Feeley wrote:
In the preamble for the document (LyX->Document->Layout->Preamble) add the
following:
\usepackage{fancyhdr}
\pagestyle{fancy}
\rhead{\bfseries 123456789}
In LyX, only the third line is necessary. In LyX 1.3.x, go to
Layout->Document...->Layout and set the Page
\usepackage{wasysym} is written into the preamble by default. How do you
remove this so that double and triple integrals will be done with the AMS
package?
Thanks,
Matt Harris
On Wed, Apr 19, 2006 at 05:49:46PM -0400, Paul A. Rubin wrote:
> Oisin C. Feeley wrote:
> >In the preamble for the document (LyX->Document->Layout->Preamble) add the
> >following:
> >
> >\usepackage{fancyhdr}
> >\pagestyle{fancy}
> >\rhead{\bfseries 123456789}
> >
>
> In LyX, only the third line
solved.
it turns out that because i include a seperate coverpage using the graphicx
and eso packages, i get the pagenumber counter offset by 1. adjusting the
pagenumber fixes the layout.
btw, i see that clearpage and cleardoublepage both behaves correctly not
interferring with the layout in any
63 matches
Mail list logo
