Re: How to show the citations without the bibliography in lyx output?

[Julio Rojas]

Are you telling me that if you put the bibliography in a note it
doesn't work? I think I remember that was the way to do it.
-
Julio Rojas
jcredbe...@gmail.com



On Tue, Jun 29, 2010 at 6:12 PM, Rob Oakes lyx-de...@oak-tree.us wrote:
 Right, so just overlook everything in that last email.  It doesn't work.
 You might be able to accomplish something by redefining the
 \thebibliography and \bibitem commands (and probably one or two more),
 but I'd need to think about how to go about doing it before making
 recommendations.

 If this route interests you, you can find some additional information
 at:

 http://en.wikibooks.org/wiki/LaTeX/Bibliography_Management

 And in chapter 12 in the LaTeX companion.

 Cheers,

 Rob

 On Tue, 2010-06-29 at 11:07 -0400, Jim Rockford wrote:
 What I'd like to do is generate a PDF document from my lyx source that
 shows all the reference citations in the main body, but does not
 produce the detailed list of references at the end, where the
 \bibliography command is placed.  Is there a quick and easy way to do
 this in Lyx?  Simply commenting out the \bibliography doesn't work
 because it messes up the citations, and other tricks I have seen (i.e.
 http://groups.google.com/group/latexusersgroup/browse_thread/thread/330d7dda163dcd91)
  cannot be implemented in an obvious way so far as I can tell.

 Thanks,
 Jim

No bibliography with apa modele

[Thibaud Hulin]

Hi,

I'm testing article(APA) class after installed it on my ubuntu and
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography doesn't
appear, with all the references option (not only all the references
cited). I use xampl standard bibliography, that works welle with an other
document.

Here's my latex log :

This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
(format=pdflatex 2010.5.9)  30 JUN 2010 14:05
entering extended mode
 restricted \write18 enabled.
 %-line parsing enabled.
**newfile3.tex
(./newfile3.tex
LaTeX2e 2009/09/24
Babel v3.8l and hyphenation patterns for english, usenglishmax, dumylang,
noh
yphenation, loaded.

(/usr/share/texmf-texlive/tex/latex/apa/apa.cls
Document Class: apa 2008/12/09 American Psychological Association format
v1.3.4


Class apa Warning: Using BibTeX with apacite for citations and references.

(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size10.clo
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\...@part=\count79
\...@section=\count80
\...@subsection=\count81
\...@subsubsection=\count82
\...@paragraph=\count83
\...@subparagraph=\count84
\...@figure=\count85
\...@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
Package: txfonts 2008/01/22 v3.2.1
LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
(Font)  OT1/cmr/m/n -- OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/cmr/bx/n -- OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/txr/m/n -- OT1/txr/bx/n on input line 22.
\symitalic=\mathgroup4
LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
(Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 26.
LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
(Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
(Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
(Font)  OT1/cmr/m/it -- OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/cmr/bx/it -- OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 31.
LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
(Font)  OT1/cmss/m/n -- OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/cmss/bx/n -- OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/txss/m/n -- OT1/txss/b/n on input line 41.
LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
(Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/txtt/m/n -- OT1/txtt/b/n on input line 51.
LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
(Font)  OML/cmm/m/it -- OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/cmm/b/it -- OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/txmi/m/it -- OML/txmi/bx/it on input line 59.
\symlettersA=\mathgroup5
LaTeX Font Info:Overwriting symbol font `lettersA' in version `bold'
(Font)  U/txmia/m/it -- U/txmia/bx/it on input line 67.
LaTeX Font Info:Redeclaring symbol font `symbols' on input line 77.
LaTeX Font Info:Overwriting symbol font `symbols' in version `normal'
(Font)  OMS/cmsy/m/n -- OMS/txsy/m/n on input line 77.
LaTeX Font Info:Overwriting symbol 

Re: Run-on text after subsubsection

[Richard Heck]

On 06/29/2010 08:51 PM, Maria Gouskova wrote:

Dear LyX users,

I am working with the article(Covington) class, revising the
formatting of my paper for a journal. My editor wants the
subsubsections to be followed by the next paragraph's text on the same
line. That is, something like this

3.2.1 My paper's section such-and-such

In this section, I will solve problem so-and-so...

Should look like this:

3.2.1.italicsMy paper's section such and suchitalics. In this
section, I will solve problem so-and-so...

Is there a way to do this non-manually, from the preamble? I am not
afraid of playing around with the layout file, as well, but I'd rather
not have to import the paper into LaTeX and use the Mouton de Gruyter
doc class, since there is too much custom formatting in my paper.



Use the titlesec package for this. Docs here:
http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
See section 3. I'd try something like:
\usepackage{titlesec}
\titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}

Richard

Maria

Re: No bibliography with apa modele

[Richard Heck]

On 06/30/2010 08:31 AM, Thibaud Hulin wrote:
I'm testing article(APA) class after installed it on my ubuntu and 
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography 
doesn't appear, with all the references option (not only all the 
references cited). I use xampl standard bibliography, that works 
welle with an other document.


Here's my latex log :

snip

Class apa Warning: \bibliographystyle command ignored on input line 108.

That looks like the error, though I'm not sure why you get it. I'm not 
familiar with the apa class.


rh

Re: Run-on text after subsubsection

[Maria Gouskova]

On Wed, Jun 30, 2010 at 9:24 AM, Richard Heck rgh...@bobjweil.com wrote:
 On 06/29/2010 08:51 PM, Maria Gouskova wrote:

 Dear LyX users,

 I am working with the article(Covington) class, revising the
 formatting of my paper for a journal. My editor wants the
 subsubsections to be followed by the next paragraph's text on the same
 line. That is, something like this

 3.2.1 My paper's section such-and-such

 In this section, I will solve problem so-and-so...

 Should look like this:

 3.2.1.italicsMy paper's section such and suchitalics. In this
 section, I will solve problem so-and-so...

 Is there a way to do this non-manually, from the preamble? I am not
 afraid of playing around with the layout file, as well, but I'd rather
 not have to import the paper into LaTeX and use the Mouton de Gruyter
 doc class, since there is too much custom formatting in my paper.



 Use the titlesec package for this. Docs here:
    http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
 See section 3. I'd try something like:
    \usepackage{titlesec}
    \titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}

 Richard

 Maria






Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending before \in@ was complete, Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

Summary:

\...@extract\subparagraph

I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.

Maria

[Resolved] Re: No bibliography with apa modele

[Thibaud Hulin]

Hello,
I just reinstall packages with this line above, that's solved my problem.
sudo apt-get install texlive-publishers texlive-bibtex-extra --purge
--reinstall

Regards,
Thibaud?

2010/6/30 Thibaud Hulin hulin.thib...@gmail.com

 Hi,

 I'm testing article(APA) class after installed it on my ubuntu and
 texlivebibtex-extra package.
 I've no message error during compilation, however the bibliography doesn't
 appear, with all the references option (not only all the references
 cited). I use xampl standard bibliography, that works welle with an other
 document.

 Here's my latex log :

 This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
 (format=pdflatex 2010.5.9)  30 JUN 2010 14:05
 entering extended mode
  restricted \write18 enabled.
  %-line parsing enabled.
 **newfile3.tex
 (./newfile3.tex
 LaTeX2e 2009/09/24
 Babel v3.8l and hyphenation patterns for english, usenglishmax, dumylang,
 noh
 yphenation, loaded.

 (/usr/share/texmf-texlive/tex/latex/apa/apa.cls
 Document Class: apa 2008/12/09 American Psychological Association format
 v1.3.4


 Class apa Warning: Using BibTeX with apacite for citations and references.

 (/usr/share/texmf-texlive/tex/latex/base/article.cls
 Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
 (/usr/share/texmf-texlive/tex/latex/base/size10.clo
 File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
 )
 \...@part=\count79
 \...@section=\count80
 \...@subsection=\count81
 \...@subsubsection=\count82
 \...@paragraph=\count83
 \...@subparagraph=\count84
 \...@figure=\count85
 \...@table=\count86
 \abovecaptionskip=\skip41
 \belowcaptionskip=\skip42
 \bibindent=\dimen102
 ) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
 Package: txfonts 2008/01/22 v3.2.1
 LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
 (Font)  OT1/cmr/m/n -- OT1/txr/m/n on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
 (Font)  OT1/cmr/bx/n -- OT1/txr/m/n on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
 (Font)  OT1/txr/m/n -- OT1/txr/bx/n on input line 22.
 \symitalic=\mathgroup4
 LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
 (Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 26.
 LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
 LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
 (Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
 LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
 (Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
 LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
 (Font)  OT1/cmr/m/it -- OT1/txr/m/it on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
 (Font)  OT1/cmr/bx/it -- OT1/txr/m/it on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
 (Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 31.
 LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
 (Font)  OT1/cmss/m/n -- OT1/txss/m/n on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
 (Font)  OT1/cmss/bx/n -- OT1/txss/m/n on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
 (Font)  OT1/txss/m/n -- OT1/txss/b/n on input line 41.
 LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
 (Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
 (Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
 (Font)  OT1/txtt/m/n -- OT1/txtt/b/n on input line 51.
 LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
 (Font)  OML/cmm/m/it -- OML/txmi/m/it on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
 (Font)  OML/cmm/b/it -- OML/txmi/m/it on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
 (Font)  OML/txmi/m/it -- OML/txmi/bx/it on input line 59.
 \symlettersA=\mathgroup5
 LaTeX Font Info:Overwriting symbol font `lettersA' in version `bold'
 (Font)

Correct Indexing in Lyx

[Salah]

How do I realize this in the index?

Absatz
 -ausrichtung, 54
 -einrückung, 27
 -Einstellungen, 54

The words -ausrichtung, -einrückung and -Einstellungen seam to be
childs of Absatz. But I don't know how to reproduce this with the indexing
option of lyx. I only get this

Absatzausrichtung, 54
Absatzeinrückung, 27
Absatz-Einstellungen, 54

Thank you!

Regards,
iustifico

Re: Correct Indexing in Lyx

[Jürgen Spitzmüller]

2010/6/30 Salah:
 How do I realize this in the index?

 Absatz
  -ausrichtung, 54
  -einrückung, 27
  -Einstellungen, 54

 The words -ausrichtung, -einrückung and -Einstellungen seam to be
 childs of Absatz. But I don't know how to reproduce this with the indexing
 option of lyx.

Try
Absatz ! -ausrichtung
The exclamation mark does the nesting.

Jürgen

Re: Run-on text after subsubsection

[Richard Heck]

On 06/30/2010 09:52 AM, Maria Gouskova wrote:


Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending before \in@ was complete, Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

   

Sorry, I messed up the command. Should be:

\usepackage{titlesec}

\titleformat{\subsubsection}[runin]{\bfseries}{\thesubsubsection.}{1ex}{}{}


for example.

Richard

Re: install latest lyx

[Louis A. Turk]

On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
 Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
  On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
   Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
   On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
  
   but this gives me:
   wolfg...@wolfgang:~/lyx-devel$ autogen.sh
   bash: autogen.sh: command not found
 
  The ./ (dot slash) is important. It tells your shell to execute the file
  from the current folder. If you get an error again, make sure the file
  is present by doing
 
  ls
 
  which should list the files in the current folder. If you copied the LyX
  source files correctly, you should see autogen.sh in there.
 
  Here are build instructions again:
  http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
 
 Hello Julien,
 
 Thanks for providing your link. Could you kindly answer the following 
 questions privately?
 
 1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did this, but 
 am afraid that was wrong. 
 2-how do I start the new lyx respectively how do I at what step tell, the new 
 lyx should eg be called lyx2?
 
 Once I got my new lyx running, I will report. 
 
 Yours
 
 Wolfgang

No, not privately, please. I want to know, too!

Louis

Re: install latest lyx

[Alan L Tyree]

On Thu, 01 Jul 2010 08:47:23 +0800
Louis A. Turk l...@dayspringpublisher.com wrote:

 On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
  Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
   On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
   
but this gives me:
wolfg...@wolfgang:~/lyx-devel$ autogen.sh
bash: autogen.sh: command not found
  
   The ./ (dot slash) is important. It tells your shell to execute
   the file from the current folder. If you get an error again, make
   sure the file is present by doing
  
   ls
  
   which should list the files in the current folder. If you copied
   the LyX source files correctly, you should see autogen.sh in
   there.
  
   Here are build instructions again:
   http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
  
  Hello Julien,
  
  Thanks for providing your link. Could you kindly answer the
  following questions privately?
  
  1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did
  this, but am afraid that was wrong. 

No, you should run ./autogen.sh as a normal user.

  2-how do I start the new lyx respectively how do I at what step
  tell, the new lyx should eg be called lyx2?

If you used ./configure --with-version-suffix=2, then the installed
executable will be lyx2. You should be able to run your original LyX
just by typing lyx in a terminal, the new one by typing lyx2.

If you launch LyX from a panel icon, then right click on the icon and
choose Properties. For the Command enter /usr/local/bin/lyx2.

At the risk of being a boring old guy, I really recommend using GNU
Stow to install compiled programs. This avoids any risk that the new
version might trash some part of the version installed by your package
manager. Also the risk that a new version installed by your package
manager will accidentally trash some part of the compiled version.

Instructions on using Stow to install are here:
http://wiki.lyx.org/Tips/Compiling under the heading Compiling and
installing with GNU STOW.

Cheers,
Alan


  
  Once I got my new lyx running, I will report. 
  
  Yours
  
  Wolfgang
 
 No, not privately, please. I want to know, too!
 
 Louis
 


-- 
Alan L Tyreehttp://www2.austlii.edu.au/~alan
Tel:  04 2748 6206

Re: How to show the citations without the bibliography in lyx output?

[Julio Rojas]

Are you telling me that if you put the bibliography in a note it
doesn't work? I think I remember that was the way to do it.
-
Julio Rojas
jcredbe...@gmail.com



On Tue, Jun 29, 2010 at 6:12 PM, Rob Oakes lyx-de...@oak-tree.us wrote:
 Right, so just overlook everything in that last email.  It doesn't work.
 You might be able to accomplish something by redefining the
 \thebibliography and \bibitem commands (and probably one or two more),
 but I'd need to think about how to go about doing it before making
 recommendations.

 If this route interests you, you can find some additional information
 at:

 http://en.wikibooks.org/wiki/LaTeX/Bibliography_Management

 And in chapter 12 in the LaTeX companion.

 Cheers,

 Rob

 On Tue, 2010-06-29 at 11:07 -0400, Jim Rockford wrote:
 What I'd like to do is generate a PDF document from my lyx source that
 shows all the reference citations in the main body, but does not
 produce the detailed list of references at the end, where the
 \bibliography command is placed.  Is there a quick and easy way to do
 this in Lyx?  Simply commenting out the \bibliography doesn't work
 because it messes up the citations, and other tricks I have seen (i.e.
 http://groups.google.com/group/latexusersgroup/browse_thread/thread/330d7dda163dcd91)
  cannot be implemented in an obvious way so far as I can tell.

 Thanks,
 Jim

No bibliography with apa modele

[Thibaud Hulin]

Hi,

I'm testing article(APA) class after installed it on my ubuntu and
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography doesn't
appear, with all the references option (not only all the references
cited). I use xampl standard bibliography, that works welle with an other
document.

Here's my latex log :

This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
(format=pdflatex 2010.5.9)  30 JUN 2010 14:05
entering extended mode
 restricted \write18 enabled.
 %-line parsing enabled.
**newfile3.tex
(./newfile3.tex
LaTeX2e 2009/09/24
Babel v3.8l and hyphenation patterns for english, usenglishmax, dumylang,
noh
yphenation, loaded.

(/usr/share/texmf-texlive/tex/latex/apa/apa.cls
Document Class: apa 2008/12/09 American Psychological Association format
v1.3.4


Class apa Warning: Using BibTeX with apacite for citations and references.

(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size10.clo
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\...@part=\count79
\...@section=\count80
\...@subsection=\count81
\...@subsubsection=\count82
\...@paragraph=\count83
\...@subparagraph=\count84
\...@figure=\count85
\...@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
Package: txfonts 2008/01/22 v3.2.1
LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
(Font)  OT1/cmr/m/n -- OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/cmr/bx/n -- OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/txr/m/n -- OT1/txr/bx/n on input line 22.
\symitalic=\mathgroup4
LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
(Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 26.
LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
(Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
(Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
(Font)  OT1/cmr/m/it -- OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/cmr/bx/it -- OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 31.
LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
(Font)  OT1/cmss/m/n -- OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/cmss/bx/n -- OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/txss/m/n -- OT1/txss/b/n on input line 41.
LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
(Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/txtt/m/n -- OT1/txtt/b/n on input line 51.
LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
(Font)  OML/cmm/m/it -- OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/cmm/b/it -- OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/txmi/m/it -- OML/txmi/bx/it on input line 59.
\symlettersA=\mathgroup5
LaTeX Font Info:Overwriting symbol font `lettersA' in version `bold'
(Font)  U/txmia/m/it -- U/txmia/bx/it on input line 67.
LaTeX Font Info:Redeclaring symbol font `symbols' on input line 77.
LaTeX Font Info:Overwriting symbol font `symbols' in version `normal'
(Font)  OMS/cmsy/m/n -- OMS/txsy/m/n on input line 77.
LaTeX Font Info:Overwriting symbol 

Re: Run-on text after subsubsection

[Richard Heck]

On 06/29/2010 08:51 PM, Maria Gouskova wrote:

Dear LyX users,

I am working with the article(Covington) class, revising the
formatting of my paper for a journal. My editor wants the
subsubsections to be followed by the next paragraph's text on the same
line. That is, something like this

3.2.1 My paper's section such-and-such

In this section, I will solve problem so-and-so...

Should look like this:

3.2.1.italicsMy paper's section such and suchitalics. In this
section, I will solve problem so-and-so...

Is there a way to do this non-manually, from the preamble? I am not
afraid of playing around with the layout file, as well, but I'd rather
not have to import the paper into LaTeX and use the Mouton de Gruyter
doc class, since there is too much custom formatting in my paper.



Use the titlesec package for this. Docs here:
http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
See section 3. I'd try something like:
\usepackage{titlesec}
\titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}

Richard

Maria

Re: No bibliography with apa modele

[Richard Heck]

On 06/30/2010 08:31 AM, Thibaud Hulin wrote:
I'm testing article(APA) class after installed it on my ubuntu and 
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography 
doesn't appear, with all the references option (not only all the 
references cited). I use xampl standard bibliography, that works 
welle with an other document.


Here's my latex log :

snip

Class apa Warning: \bibliographystyle command ignored on input line 108.

That looks like the error, though I'm not sure why you get it. I'm not 
familiar with the apa class.


rh

Re: Run-on text after subsubsection

[Maria Gouskova]

On Wed, Jun 30, 2010 at 9:24 AM, Richard Heck rgh...@bobjweil.com wrote:
 On 06/29/2010 08:51 PM, Maria Gouskova wrote:

 Dear LyX users,

 I am working with the article(Covington) class, revising the
 formatting of my paper for a journal. My editor wants the
 subsubsections to be followed by the next paragraph's text on the same
 line. That is, something like this

 3.2.1 My paper's section such-and-such

 In this section, I will solve problem so-and-so...

 Should look like this:

 3.2.1.italicsMy paper's section such and suchitalics. In this
 section, I will solve problem so-and-so...

 Is there a way to do this non-manually, from the preamble? I am not
 afraid of playing around with the layout file, as well, but I'd rather
 not have to import the paper into LaTeX and use the Mouton de Gruyter
 doc class, since there is too much custom formatting in my paper.



 Use the titlesec package for this. Docs here:
    http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
 See section 3. I'd try something like:
    \usepackage{titlesec}
    \titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}

 Richard

 Maria






Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending before \in@ was complete, Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

Summary:

\...@extract\subparagraph

I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.

Maria

[Resolved] Re: No bibliography with apa modele

[Thibaud Hulin]

Hello,
I just reinstall packages with this line above, that's solved my problem.
sudo apt-get install texlive-publishers texlive-bibtex-extra --purge
--reinstall

Regards,
Thibaud?

2010/6/30 Thibaud Hulin hulin.thib...@gmail.com

 Hi,

 I'm testing article(APA) class after installed it on my ubuntu and
 texlivebibtex-extra package.
 I've no message error during compilation, however the bibliography doesn't
 appear, with all the references option (not only all the references
 cited). I use xampl standard bibliography, that works welle with an other
 document.

 Here's my latex log :

 This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
 (format=pdflatex 2010.5.9)  30 JUN 2010 14:05
 entering extended mode
  restricted \write18 enabled.
  %-line parsing enabled.
 **newfile3.tex
 (./newfile3.tex
 LaTeX2e 2009/09/24
 Babel v3.8l and hyphenation patterns for english, usenglishmax, dumylang,
 noh
 yphenation, loaded.

 (/usr/share/texmf-texlive/tex/latex/apa/apa.cls
 Document Class: apa 2008/12/09 American Psychological Association format
 v1.3.4


 Class apa Warning: Using BibTeX with apacite for citations and references.

 (/usr/share/texmf-texlive/tex/latex/base/article.cls
 Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
 (/usr/share/texmf-texlive/tex/latex/base/size10.clo
 File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
 )
 \...@part=\count79
 \...@section=\count80
 \...@subsection=\count81
 \...@subsubsection=\count82
 \...@paragraph=\count83
 \...@subparagraph=\count84
 \...@figure=\count85
 \...@table=\count86
 \abovecaptionskip=\skip41
 \belowcaptionskip=\skip42
 \bibindent=\dimen102
 ) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
 Package: txfonts 2008/01/22 v3.2.1
 LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
 (Font)  OT1/cmr/m/n -- OT1/txr/m/n on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
 (Font)  OT1/cmr/bx/n -- OT1/txr/m/n on input line 21.
 LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
 (Font)  OT1/txr/m/n -- OT1/txr/bx/n on input line 22.
 \symitalic=\mathgroup4
 LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
 (Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 26.
 LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
 LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
 (Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
 LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
 (Font)  OT1/cmr/bx/n -- OT1/txr/bx/n on input line 29.
 LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
 (Font)  OT1/cmr/m/it -- OT1/txr/m/it on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
 (Font)  OT1/cmr/bx/it -- OT1/txr/m/it on input line 30.
 LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
 (Font)  OT1/txr/m/it -- OT1/txr/bx/it on input line 31.
 LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
 (Font)  OT1/cmss/m/n -- OT1/txss/m/n on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
 (Font)  OT1/cmss/bx/n -- OT1/txss/m/n on input line 40.
 LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
 (Font)  OT1/txss/m/n -- OT1/txss/b/n on input line 41.
 LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
 (Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
 (Font)  OT1/cmtt/m/n -- OT1/txtt/m/n on input line 50.
 LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
 (Font)  OT1/txtt/m/n -- OT1/txtt/b/n on input line 51.
 LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
 (Font)  OML/cmm/m/it -- OML/txmi/m/it on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
 (Font)  OML/cmm/b/it -- OML/txmi/m/it on input line 58.
 LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
 (Font)  OML/txmi/m/it -- OML/txmi/bx/it on input line 59.
 \symlettersA=\mathgroup5
 LaTeX Font Info:Overwriting symbol font `lettersA' in version `bold'
 (Font)

Correct Indexing in Lyx

[Salah]

How do I realize this in the index?

Absatz
 -ausrichtung, 54
 -einrückung, 27
 -Einstellungen, 54

The words -ausrichtung, -einrückung and -Einstellungen seam to be
childs of Absatz. But I don't know how to reproduce this with the indexing
option of lyx. I only get this

Absatzausrichtung, 54
Absatzeinrückung, 27
Absatz-Einstellungen, 54

Thank you!

Regards,
iustifico

Re: Correct Indexing in Lyx

[Jürgen Spitzmüller]

2010/6/30 Salah:
 How do I realize this in the index?

 Absatz
  -ausrichtung, 54
  -einrückung, 27
  -Einstellungen, 54

 The words -ausrichtung, -einrückung and -Einstellungen seam to be
 childs of Absatz. But I don't know how to reproduce this with the indexing
 option of lyx.

Try
Absatz ! -ausrichtung
The exclamation mark does the nesting.

Jürgen

Re: Run-on text after subsubsection

[Richard Heck]

On 06/30/2010 09:52 AM, Maria Gouskova wrote:


Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending before \in@ was complete, Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

   

Sorry, I messed up the command. Should be:

\usepackage{titlesec}

\titleformat{\subsubsection}[runin]{\bfseries}{\thesubsubsection.}{1ex}{}{}


for example.

Richard

Re: install latest lyx

[Louis A. Turk]

On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
 Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
  On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
   Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
   On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
  
   but this gives me:
   wolfg...@wolfgang:~/lyx-devel$ autogen.sh
   bash: autogen.sh: command not found
 
  The ./ (dot slash) is important. It tells your shell to execute the file
  from the current folder. If you get an error again, make sure the file
  is present by doing
 
  ls
 
  which should list the files in the current folder. If you copied the LyX
  source files correctly, you should see autogen.sh in there.
 
  Here are build instructions again:
  http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
 
 Hello Julien,
 
 Thanks for providing your link. Could you kindly answer the following 
 questions privately?
 
 1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did this, but 
 am afraid that was wrong. 
 2-how do I start the new lyx respectively how do I at what step tell, the new 
 lyx should eg be called lyx2?
 
 Once I got my new lyx running, I will report. 
 
 Yours
 
 Wolfgang

No, not privately, please. I want to know, too!

Louis

Re: install latest lyx

[Alan L Tyree]

On Thu, 01 Jul 2010 08:47:23 +0800
Louis A. Turk l...@dayspringpublisher.com wrote:

 On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
  Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
   On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
   
but this gives me:
wolfg...@wolfgang:~/lyx-devel$ autogen.sh
bash: autogen.sh: command not found
  
   The ./ (dot slash) is important. It tells your shell to execute
   the file from the current folder. If you get an error again, make
   sure the file is present by doing
  
   ls
  
   which should list the files in the current folder. If you copied
   the LyX source files correctly, you should see autogen.sh in
   there.
  
   Here are build instructions again:
   http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
  
  Hello Julien,
  
  Thanks for providing your link. Could you kindly answer the
  following questions privately?
  
  1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did
  this, but am afraid that was wrong. 

No, you should run ./autogen.sh as a normal user.

  2-how do I start the new lyx respectively how do I at what step
  tell, the new lyx should eg be called lyx2?

If you used ./configure --with-version-suffix=2, then the installed
executable will be lyx2. You should be able to run your original LyX
just by typing lyx in a terminal, the new one by typing lyx2.

If you launch LyX from a panel icon, then right click on the icon and
choose Properties. For the Command enter /usr/local/bin/lyx2.

At the risk of being a boring old guy, I really recommend using GNU
Stow to install compiled programs. This avoids any risk that the new
version might trash some part of the version installed by your package
manager. Also the risk that a new version installed by your package
manager will accidentally trash some part of the compiled version.

Instructions on using Stow to install are here:
http://wiki.lyx.org/Tips/Compiling under the heading Compiling and
installing with GNU STOW.

Cheers,
Alan


  
  Once I got my new lyx running, I will report. 
  
  Yours
  
  Wolfgang
 
 No, not privately, please. I want to know, too!
 
 Louis
 


-- 
Alan L Tyreehttp://www2.austlii.edu.au/~alan
Tel:  04 2748 6206

Re: How to show the citations without the bibliography in lyx output?

[Julio Rojas]

Are you telling me that if you put the bibliography in a note it
doesn't work? I think I remember that was the way to do it.
-
Julio Rojas
jcredbe...@gmail.com



On Tue, Jun 29, 2010 at 6:12 PM, Rob Oakes  wrote:
> Right, so just overlook everything in that last email.  It doesn't work.
> You might be able to accomplish something by redefining the
> \thebibliography and \bibitem commands (and probably one or two more),
> but I'd need to think about how to go about doing it before making
> recommendations.
>
> If this route interests you, you can find some additional information
> at:
>
> http://en.wikibooks.org/wiki/LaTeX/Bibliography_Management
>
> And in chapter 12 in the LaTeX companion.
>
> Cheers,
>
> Rob
>
> On Tue, 2010-06-29 at 11:07 -0400, Jim Rockford wrote:
>> What I'd like to do is generate a PDF document from my lyx source that
>> shows all the reference citations in the main body, but does not
>> produce the detailed list of references at the end, where the
>> \bibliography command is placed.  Is there a quick and easy way to do
>> this in Lyx?  Simply commenting out the \bibliography doesn't work
>> because it messes up the citations, and other tricks I have seen (i.e.
>> http://groups.google.com/group/latexusersgroup/browse_thread/thread/330d7dda163dcd91)
>>  cannot be implemented in an obvious way so far as I can tell.
>>
>> Thanks,
>> Jim
>
>
>

No bibliography with apa modele

[Thibaud Hulin]

Hi,

I'm testing article(APA) class after installed it on my ubuntu and
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography doesn't
appear, with "all the references" option (not only "all the references
cited"). I use "xampl" standard bibliography, that works welle with an other
document.

Here's my latex log :

This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
(format=pdflatex 2010.5.9)  30 JUN 2010 14:05
entering extended mode
 restricted \write18 enabled.
 %&-line parsing enabled.
**newfile3.tex
(./newfile3.tex
LaTeX2e <2009/09/24>
Babel  and hyphenation patterns for english, usenglishmax, dumylang,
noh
yphenation, loaded.

(/usr/share/texmf-texlive/tex/latex/apa/apa.cls
Document Class: apa 2008/12/09 American Psychological Association format
v1.3.4


Class apa Warning: Using BibTeX with apacite for citations and references.

(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size10.clo
File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
)
\...@part=\count79
\...@section=\count80
\...@subsection=\count81
\...@subsubsection=\count82
\...@paragraph=\count83
\...@subparagraph=\count84
\...@figure=\count85
\...@table=\count86
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
\bibindent=\dimen102
) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
Package: txfonts 2008/01/22 v3.2.1
LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
(Font)  OT1/cmr/m/n --> OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/cmr/bx/n --> OT1/txr/m/n on input line 21.
LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
(Font)  OT1/txr/m/n --> OT1/txr/bx/n on input line 22.
\symitalic=\mathgroup4
LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
(Font)  OT1/txr/m/it --> OT1/txr/bx/it on input line 26.
LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
(Font)  OT1/cmr/bx/n --> OT1/txr/bx/n on input line 29.
LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
(Font)  OT1/cmr/bx/n --> OT1/txr/bx/n on input line 29.
LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
(Font)  OT1/cmr/m/it --> OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/cmr/bx/it --> OT1/txr/m/it on input line 30.
LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
(Font)  OT1/txr/m/it --> OT1/txr/bx/it on input line 31.
LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
(Font)  OT1/cmss/m/n --> OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/cmss/bx/n --> OT1/txss/m/n on input line 40.
LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
(Font)  OT1/txss/m/n --> OT1/txss/b/n on input line 41.
LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
(Font)  OT1/cmtt/m/n --> OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/cmtt/m/n --> OT1/txtt/m/n on input line 50.
LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
(Font)  OT1/txtt/m/n --> OT1/txtt/b/n on input line 51.
LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
(Font)  OML/cmm/m/it --> OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/cmm/b/it --> OML/txmi/m/it on input line 58.
LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
(Font)  OML/txmi/m/it --> OML/txmi/bx/it on input line 59.
\symlettersA=\mathgroup5
LaTeX Font Info:Overwriting symbol font `lettersA' in version `bold'
(Font)  U/txmia/m/it --> U/txmia/bx/it on input line 67.
LaTeX Font Info:Redeclaring symbol font `symbols' on input line 77.
LaTeX Font Info:Overwriting symbol font `symbols' in version `normal'
(Font)  OMS/cmsy/m/n --> OMS/txsy/m/n on input line 77.
LaTeX Font Info:   

Re: Run-on text after subsubsection

[Richard Heck]

On 06/29/2010 08:51 PM, Maria Gouskova wrote:

Dear LyX users,

I am working with the article(Covington) class, revising the
formatting of my paper for a journal. My editor wants the
subsubsections to be followed by the next paragraph's text on the same
line. That is, something like this

3.2.1 My paper's section such-and-such

In this section, I will solve problem so-and-so...

Should look like this:

3.2.1.My paper's section such and such. In this
section, I will solve problem so-and-so...

Is there a way to do this non-manually, from the preamble? I am not
afraid of playing around with the layout file, as well, but I'd rather
not have to import the paper into LaTeX and use the Mouton de Gruyter
doc class, since there is too much custom formatting in my paper.



Use the titlesec package for this. Docs here:
http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
See section 3. I'd try something like:
\usepackage{titlesec}
\titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}

Richard

Maria

Re: No bibliography with apa modele

[Richard Heck]

On 06/30/2010 08:31 AM, Thibaud Hulin wrote:
I'm testing article(APA) class after installed it on my ubuntu and 
texlivebibtex-extra package.
I've no message error during compilation, however the bibliography 
doesn't appear, with "all the references" option (not only "all the 
references cited"). I use "xampl" standard bibliography, that works 
welle with an other document.


Here's my latex log :



Class apa Warning: \bibliographystyle command ignored on input line 108.

That looks like the error, though I'm not sure why you get it. I'm not 
familiar with the apa class.


rh

Re: Run-on text after subsubsection

[Maria Gouskova]

On Wed, Jun 30, 2010 at 9:24 AM, Richard Heck  wrote:
> On 06/29/2010 08:51 PM, Maria Gouskova wrote:
>>
>> Dear LyX users,
>>
>> I am working with the article(Covington) class, revising the
>> formatting of my paper for a journal. My editor wants the
>> subsubsections to be followed by the next paragraph's text on the same
>> line. That is, something like this
>>
>> 3.2.1 My paper's section such-and-such
>>
>> In this section, I will solve problem so-and-so...
>>
>> Should look like this:
>>
>> 3.2.1.My paper's section such and such. In this
>> section, I will solve problem so-and-so...
>>
>> Is there a way to do this non-manually, from the preamble? I am not
>> afraid of playing around with the layout file, as well, but I'd rather
>> not have to import the paper into LaTeX and use the Mouton de Gruyter
>> doc class, since there is too much custom formatting in my paper.
>>
>>
>
> Use the titlesec package for this. Docs here:
>    http://ctan.org/tex-archive/macros/latex/contrib/titlesec/titlesec.pdf
> See section 3. I'd try something like:
>    \usepackage{titlesec}
>    \titleformat{\subsubsection}{it}{runin}{\thesection.}{1ex}{}{}
>
> Richard
>>
>> Maria
>>
>
>



Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending "before \in@ was complete", Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

Summary:

\...@extract\subparagraph

I've run across a `}' that doesn't seem to match anything.
For example, `\def\a#1{...}' and `\a}' would produce
this error. If you simply proceed now, the `\par' that
I've just inserted will cause me to report a runaway
argument that might be the root of the problem. But if
your `}' was spurious, just type `2' and it will go away.

Maria

[Resolved] Re: No bibliography with apa modele

[Thibaud Hulin]

Hello,
I just reinstall packages with this line above, that's solved my problem.
sudo apt-get install texlive-publishers texlive-bibtex-extra --purge
--reinstall

Regards,
Thibaud?

2010/6/30 Thibaud Hulin 

> Hi,
>
> I'm testing article(APA) class after installed it on my ubuntu and
> texlivebibtex-extra package.
> I've no message error during compilation, however the bibliography doesn't
> appear, with "all the references" option (not only "all the references
> cited"). I use "xampl" standard bibliography, that works welle with an other
> document.
>
> Here's my latex log :
>
> This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
> (format=pdflatex 2010.5.9)  30 JUN 2010 14:05
> entering extended mode
>  restricted \write18 enabled.
>  %&-line parsing enabled.
> **newfile3.tex
> (./newfile3.tex
> LaTeX2e <2009/09/24>
> Babel  and hyphenation patterns for english, usenglishmax, dumylang,
> noh
> yphenation, loaded.
>
> (/usr/share/texmf-texlive/tex/latex/apa/apa.cls
> Document Class: apa 2008/12/09 American Psychological Association format
> v1.3.4
>
>
> Class apa Warning: Using BibTeX with apacite for citations and references.
>
> (/usr/share/texmf-texlive/tex/latex/base/article.cls
> Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
> (/usr/share/texmf-texlive/tex/latex/base/size10.clo
> File: size10.clo 2007/10/19 v1.4h Standard LaTeX file (size option)
> )
> \...@part=\count79
> \...@section=\count80
> \...@subsection=\count81
> \...@subsubsection=\count82
> \...@paragraph=\count83
> \...@subparagraph=\count84
> \...@figure=\count85
> \...@table=\count86
> \abovecaptionskip=\skip41
> \belowcaptionskip=\skip42
> \bibindent=\dimen102
> ) (/usr/share/texmf-texlive/tex/latex/txfonts/txfonts.sty
> Package: txfonts 2008/01/22 v3.2.1
> LaTeX Font Info:Redeclaring symbol font `operators' on input line 21.
> LaTeX Font Info:Overwriting symbol font `operators' in version `normal'
> (Font)  OT1/cmr/m/n --> OT1/txr/m/n on input line 21.
> LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
> (Font)  OT1/cmr/bx/n --> OT1/txr/m/n on input line 21.
> LaTeX Font Info:Overwriting symbol font `operators' in version `bold'
> (Font)  OT1/txr/m/n --> OT1/txr/bx/n on input line 22.
> \symitalic=\mathgroup4
> LaTeX Font Info:Overwriting symbol font `italic' in version `bold'
> (Font)  OT1/txr/m/it --> OT1/txr/bx/it on input line 26.
> LaTeX Font Info:Redeclaring math alphabet \mathbf on input line 29.
> LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `normal'
> (Font)  OT1/cmr/bx/n --> OT1/txr/bx/n on input line 29.
> LaTeX Font Info:Overwriting math alphabet `\mathbf' in version `bold'
> (Font)  OT1/cmr/bx/n --> OT1/txr/bx/n on input line 29.
> LaTeX Font Info:Redeclaring math alphabet \mathit on input line 30.
> LaTeX Font Info:Overwriting math alphabet `\mathit' in version `normal'
> (Font)  OT1/cmr/m/it --> OT1/txr/m/it on input line 30.
> LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
> (Font)  OT1/cmr/bx/it --> OT1/txr/m/it on input line 30.
> LaTeX Font Info:Overwriting math alphabet `\mathit' in version `bold'
> (Font)  OT1/txr/m/it --> OT1/txr/bx/it on input line 31.
> LaTeX Font Info:Redeclaring math alphabet \mathsf on input line 40.
> LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `normal'
> (Font)  OT1/cmss/m/n --> OT1/txss/m/n on input line 40.
> LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
> (Font)  OT1/cmss/bx/n --> OT1/txss/m/n on input line 40.
> LaTeX Font Info:Overwriting math alphabet `\mathsf' in version `bold'
> (Font)  OT1/txss/m/n --> OT1/txss/b/n on input line 41.
> LaTeX Font Info:Redeclaring math alphabet \mathtt on input line 50.
> LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `normal'
> (Font)  OT1/cmtt/m/n --> OT1/txtt/m/n on input line 50.
> LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
> (Font)  OT1/cmtt/m/n --> OT1/txtt/m/n on input line 50.
> LaTeX Font Info:Overwriting math alphabet `\mathtt' in version `bold'
> (Font)  OT1/txtt/m/n --> OT1/txtt/b/n on input line 51.
> LaTeX Font Info:Redeclaring symbol font `letters' on input line 58.
> LaTeX Font Info:Overwriting symbol font `letters' in version `normal'
> (Font)  OML/cmm/m/it --> OML/txmi/m/it on input line 58.
> LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
> (Font)  OML/cmm/b/it --> OML/txmi/m/it on input line 58.
> LaTeX Font Info:Overwriting symbol font `letters' in version `bold'
> (Font)  OML/txmi/m/it --> OML/txmi/bx/it on input line 59.

Correct Indexing in Lyx

[Salah]

How do I realize this in the index?

Absatz
 -ausrichtung, 54
 -einrückung, 27
 -Einstellungen, 54

The words "-ausrichtung", "-einrückung" and "-Einstellungen" seam to be
childs of "Absatz". But I don't know how to reproduce this with the indexing
option of lyx. I only get this

Absatzausrichtung, 54
Absatzeinrückung, 27
Absatz-Einstellungen, 54

Thank you!

Regards,
iustifico

Re: Correct Indexing in Lyx

[Jürgen Spitzmüller]

2010/6/30 Salah:
> How do I realize this in the index?
>
> Absatz
>  -ausrichtung, 54
>  -einrückung, 27
>  -Einstellungen, 54
>
> The words "-ausrichtung", "-einrückung" and "-Einstellungen" seam to be
> childs of "Absatz". But I don't know how to reproduce this with the indexing
> option of lyx.

Try
Absatz ! -ausrichtung
The exclamation mark does the nesting.

Jürgen

Re: Run-on text after subsubsection

[Richard Heck]

On 06/30/2010 09:52 AM, Maria Gouskova wrote:


Hmm, I looked into sectsty already, which doesn't have anything
useful, and titlesec  chokes, producing a long error with lots of
complaints about paragraphs ending "before \in@ was complete", Package
titlesec Error: Entered in horizontal mode, illegal units of measure,
etc.

   

Sorry, I messed up the command. Should be:

\usepackage{titlesec}

\titleformat{\subsubsection}[runin]{\bfseries}{\thesubsubsection.}{1ex}{}{}


for example.

Richard

Re: install latest lyx

[Louis A. Turk]

On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
> Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
> > On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
> > > Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
> > >> On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
> > >
> > > but this gives me:
> > > wolfg...@wolfgang:~/lyx-devel$ autogen.sh
> > > bash: autogen.sh: command not found
> >
> > The ./ (dot slash) is important. It tells your shell to execute the file
> > from the current folder. If you get an error again, make sure the file
> > is present by doing
> >
> > ls
> >
> > which should list the files in the current folder. If you copied the LyX
> > source files correctly, you should see autogen.sh in there.
> >
> > Here are build instructions again:
> > http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
> 
> Hello Julien,
> 
> Thanks for providing your link. Could you kindly answer the following 
> questions privately?
> 
> 1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did this, but 
> am afraid that was wrong. 
> 2-how do I start the new lyx respectively how do I at what step tell, the new 
> lyx should eg be called lyx2?
> 
> Once I got my new lyx running, I will report. 
> 
> Yours
> 
> Wolfgang

No, not privately, please. I want to know, too!

Louis

Re: install latest lyx

[Alan L Tyree]

On Thu, 01 Jul 2010 08:47:23 +0800
"Louis A. Turk"  wrote:

> On Tue, 2010-06-29 at 11:14 +0200, Wolfgang Engelmann wrote:
> > Am Tuesday 22 June 2010 19:15:17 schrieb Julien Rioux:
> > > On 22/06/2010 1:05 PM, Wolfgang Engelmann wrote:
> > > > Am Tuesday 22 June 2010 18:50:24 schrieb Julien Rioux:
> > > >> On 22/06/2010 12:12 PM, Wolfgang Engelmann wrote:
> > > >
> > > > but this gives me:
> > > > wolfg...@wolfgang:~/lyx-devel$ autogen.sh
> > > > bash: autogen.sh: command not found
> > >
> > > The ./ (dot slash) is important. It tells your shell to execute
> > > the file from the current folder. If you get an error again, make
> > > sure the file is present by doing
> > >
> > > ls
> > >
> > > which should list the files in the current folder. If you copied
> > > the LyX source files correctly, you should see autogen.sh in
> > > there.
> > >
> > > Here are build instructions again:
> > > http://www.physics.utoronto.ca/~jrioux/resources/lyx/#devel
> > 
> > Hello Julien,
> > 
> > Thanks for providing your link. Could you kindly answer the
> > following questions privately?
> > 
> > 1-Do I have to run the ./autogen.sh in my /lyx-devel as root? I did
> > this, but am afraid that was wrong. 

No, you should run ./autogen.sh as a normal user.

> > 2-how do I start the new lyx respectively how do I at what step
> > tell, the new lyx should eg be called lyx2?

If you used ./configure --with-version-suffix=2, then the installed
executable will be lyx2. You should be able to run your original LyX
just by typing lyx in a terminal, the new one by typing lyx2.

If you launch LyX from a panel icon, then right click on the icon and
choose "Properties". For the "Command" enter /usr/local/bin/lyx2.

At the risk of being a boring old guy, I really recommend using GNU
Stow to install compiled programs. This avoids any risk that the new
version might trash some part of the version installed by your package
manager. Also the risk that a new version installed by your package
manager will accidentally trash some part of the compiled version.

Instructions on using Stow to install are here:
http://wiki.lyx.org/Tips/Compiling under the heading "Compiling and
installing with GNU STOW".

Cheers,
Alan


> > 
> > Once I got my new lyx running, I will report. 
> > 
> > Yours
> > 
> > Wolfgang
> 
> No, not privately, please. I want to know, too!
> 
> Louis
> 


-- 
Alan L Tyreehttp://www2.austlii.edu.au/~alan
Tel:  04 2748 6206