Re: Windows users: can you test the 2.3.0 installer?
I had a big problem with the use of the new LyX 2.3 bundle. The installation by itself went fine, side by side with the current LyX 2.2.3 version, using my existing local Miktex 2.9 distribution. But the compilation with LyX 2.3 of any document failed with a report of a problem on pdflatex.exe (something like missing program). I tried to reconfigure LyX 2.3 but the problem remained. I then switched to LyX 2.2.3 and faced the same problem with in addition the reported missing of some document classes. It seemed that the Miktex configuration was corrupted. I then uninstalled LyX 2.3 and had to upgrade/maintain the Miktex configuration with its package manager to recover a working LyX 2.2.3. So there is certainly a problem with the way LyX 2.3 interacts with Miktex. I had no problem of this kind with the LyX2.3RC 1 & 2. 2018-02-27 23:12 GMT+01:00 Scott Kostyshak : > Dear Windows users, > > We received a report that the Windows installer lead to an error, so I > would like to get some more testing before we announce the release. > > Can you test the installer for 2.3.0? > > ftp://ftp.lyx.org/pub/lyx/bin/2.3.0 > > If you test, which installer did you test: the "bundle" or the > "installer"? > > Did you get a popup from the MiKTeX package manger during the > installation process? If you just close that popup, does everything > continue as normal? > > Do you get any other errors? After you install it, are you able to open > Help > User Guide and compile it without error? > > Thanks, > > Scott >
Re: Windows users: can you test the 2.3.0 installer?
On Wed, Feb 28, 2018 at 04:05:43AM +, Andrew Parsloe wrote: > I had no problems with the installation (windows 7, installer rather than > bundle). I always install offline to avoid possible hassles with the > interaction with MiKTeX, which I keep up to date independently. Good to know, thanks Andrew! Scott signature.asc Description: PGP signature
Re: 2.3.0 installer test on Windows 10
On Wed, Feb 28, 2018 at 12:46:49AM +, Eric Barkan wrote: > Sorry, Scott. I first sent this to your own email by mistake. Re-sending to > the list. No problem, thanks for resending. > I've installed and run the latest 2.3.0 installer from the FTP site on > Windows 10. > > I've done 2 installations, both against TexLive 2017: > > 1. Windows 10 running natively on a new Dell laptop with Kaby Lake Xeon. > > 2. Windows 10 under Virtual box on a Fedora 27 host. > > No problems or errors at all, either during installation, lyx program > startup, or compiling the User Guide. The generated User Guide PDF looks OK > as far as I can tell. Good to know. > Yes, that's French, not Spanish. If you go to that line, and then go to Edit > Language, French should appear with a check mark. I think the reason why the Spanish error comes up is from the line just below it, which is in Spanish. > After clicking "Show Output Anyway" the PDF compiles without further error > and the affected lines in Section 3.9.2 appear normal. > > > Am I missing some package from Texlive? Do you have "babel-spanish" installed? > Hope this helps. In any case, thanks to you all for your hard work on this > release! Thank you, Eric. This is all very helpful! I appreciate your testing and detailed feedback. Scott signature.asc Description: PGP signature
Re: LyX: LaTeX failed: LaTeX Log File Attached
On Wed, Feb 28, 2018 at 05:15:44AM +, elloh van wrote: > Dear Sir/Madam, > > I have just installed LyX version 2.2.3 Windows version on my laptop running > Windows 10 but when I wanted to see my output in other formats, i. e., > View[PDF(pdflatex)], the pdflatex gives the following error message: > "LyX: LaTeX failedthe external program pdflatex finished with an error.It is > recommended you fix the cause of external progam's error (check the logs)". > > I have attached the LaTeX Log File to this mail for your consideration. > Hope to hearing from you soon.Thank youKind regards Dear Elloh, Is the problem just with a specific document or it is with any document? Are you able to compile Help > Introduction? Best, Scott signature.asc Description: PGP signature
LyX: LaTeX failed: LaTeX Log File Attached
Dear Sir/Madam, I have just installed LyX version 2.2.3 Windows version on my laptop running Windows 10 but when I wanted to see my output in other formats, i. e., View[PDF(pdflatex)], the pdflatex gives the following error message: "LyX: LaTeX failedthe external program pdflatex finished with an error.It is recommended you fix the cause of external progam's error (check the logs)". I have attached the LaTeX Log File to this mail for your consideration. Hope to hearing from you soon.Thank youKind regards Van The LaTeX Log File is as shown below: This is pdfTeX, Version 3.14159265-2.6-1.40.18 (MiKTeX 2.9.6600 64-bit) (preloaded format=pdflatex 2018.2.20) 25 FEB 2018 08:38entering extended mode**./newfile1.tex(newfile1.texLaTeX2e <2017-04-15>Babel <3.18> and hyphenation patterns for 75 language(s) loaded. ("C:\Program Files\MiKTeX 2.9\tex\latex\base\article.cls"Document Class: article 2014/09/29 v1.4h Standard LaTeX document class("C:\Program Files\MiKTeX 2.9\tex\latex\base\size10.clo"File: size10.clo 2014/09/29 v1.4h Standard LaTeX file (size option))\c@part=\count79\c@section=\count80\c@subsection=\count81\c@subsubsection=\count82\c@paragraph=\count83\c@subparagraph=\count84\c@figure=\count85\c@table=\count86\abovecaptionskip=\skip41\belowcaptionskip=\skip42\bibindent=\dimen102) ("C:\Program Files\MiKTeX 2.9\tex\latex\base\fontenc.sty"Package: fontenc 2017/04/05 v2.0i Standard LaTeX package("C:\Program Files\MiKTeX 2.9\tex\latex\base\t1enc.def"File: t1enc.def 2017/04/05 v2.0i Standard LaTeX fileLaTeX Font Info: Redeclaring font encoding T1 on input line 48.)) ("C:\Program Files\MiKTeX 2.9\tex\latex\base\inputenc.sty"Package: inputenc 2015/03/17 v1.2c Input encoding file\inpenc@prehook=\toks14\inpenc@posthook=\toks15("C:\Program Files\MiKTeX 2.9\tex\latex\base\latin9.def"File: latin9.def 2015/03/17 v1.2c Input encoding file)) ("C:\Program Files\MiKTeX 2.9\tex\generic\babel\babel.sty"Package: babel 2018/02/14 3.18 The Babel package("C:\Program Files\MiKTeX 2.9\tex\generic\babel\switch.def"File: switch.def 2018/02/14 3.18 Babel switching mechanism) ("C:\Program Files\MiKTeX 2.9\tex\latex\babel-english\english.ldf"Language: english 2017/06/06 v3.3r English support from the babel system("C:\Program Files\MiKTeX 2.9\tex\generic\babel\babel.def"File: babel.def 2018/02/14 3.18 Babel common definitions\babel@savecnt=\count87\U@D=\dimen103("C:\Program Files\MiKTeX 2.9\tex\generic\babel\txtbabel.def")\bbl@dirlevel=\count88)\l@canadian = a dialect from \language\l@american \l@australian = a dialect from \language\l@british \l@newzealand = a dialect from \language\l@british )) (newfile1.aux)\openout1 = `newfile1.aux'. LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 9.LaTeX Font Info: ... okay on input line 9.LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 9.LaTeX Font Info: ... okay on input line 9.LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 9.LaTeX Font Info: ... okay on input line 9.LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 9.LaTeX Font Info: ... okay on input line 9.LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 9.LaTeX Font Info: ... okay on input line 9.LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 9.LaTeX Font Info: ... okay on input line 9.[1 {C:/Users/ellohv/AppData/Local/MiKTeX/2.9/pdftex/config/pdftex.map}] (newfile1.aux) ) Here is how much of TeX's memory you used: 956 strings out of 493305 11346 string characters out of 3138871 71641 words of memory out of 300 4563 multiletter control sequences out of 15000+20 4403 words of font info for 15 fonts, out of 300 for 9000 1141 hyphenation exceptions out of 8191 24i,4n,23p,191b,113s stack positions out of 5000i,500n,1p,20b,5s Output written on newfile1.pdf (1 page, 12062 bytes).PDF statistics: 43 PDF objects out of 1000 (max. 8388607) 0 named destinations out of 1000 (max. 50) 1 words of extra memory for PDF output out of 1 (max. 1000)
Re: Windows users: can you test the 2.3.0 installer?
On 28/02/2018 11:12 a.m., Scott Kostyshak wrote: Dear Windows users, We received a report that the Windows installer lead to an error, so I would like to get some more testing before we announce the release. Can you test the installer for 2.3.0? ftp://ftp.lyx.org/pub/lyx/bin/2.3.0 If you test, which installer did you test: the "bundle" or the "installer"? Did you get a popup from the MiKTeX package manger during the installation process? If you just close that popup, does everything continue as normal? Do you get any other errors? After you install it, are you able to open Help > User Guide and compile it without error? Thanks, Scott I had no problems with the installation (windows 7, installer rather than bundle). I always install offline to avoid possible hassles with the interaction with MiKTeX, which I keep up to date independently. Andrew --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
2.3.0 installer test on Windows 10
Sorry, Scott. I first sent this to your own email by mistake. Re-sending to the list. I've installed and run the latest 2.3.0 installer from the FTP site on Windows 10. I've done 2 installations, both against TexLive 2017: 1. Windows 10 running natively on a new Dell laptop with Kaby Lake Xeon. 2. Windows 10 under Virtual box on a Fedora 27 host. No problems or errors at all, either during installation, lyx program startup, or compiling the User Guide. The generated User Guide PDF looks OK as far as I can tell. Separately, FYI: I have also built and tested the 2.3.0 tarball under Fedora 27/Texlive with QT 5.9.4. It builds and runs without error on my own documents. However, when compiling the User Guide, it throws two errors: 1. "Illegal parameter number in definition of \captionsspanish" with the Description: } You meant to type ## instead of #, right? Or maybe a } was forgotten somewhere earlier, and things are all screwed up? I'm going to assume that you meant ##. and: 2. "Package babel Error: You haven't defined the language spanish yet." with the Description: \selectlanguage{spanish} % Your command will be ignored, type to proceed These errors appear to be triggered in Section 3.9.2 on the line: "Les incises - même si tout le monde ne les aime pas – sont très utiles." Yes, that's French, not Spanish. After clicking "Show Output Anyway" the PDF compiles without further error and the affected lines in Section 3.9.2 appear normal. Am I missing some package from Texlive? Hope this helps. In any case, thanks to you all for your hard work on this release! Eric Barkan
RE: Windows users: can you test the 2.3.0 installer?
Yesterday I installed lyx 2.3.0 without any problems. (Win 10) Sergio De: Scott Kostyshak Enviado: martes, 27 de febrero de 2018 19:13 Para: LyX Users Asunto: Windows users: can you test the 2.3.0 installer? Dear Windows users, We received a report that the Windows installer lead to an error, so I would like to get some more testing before we announce the release. Can you test the installer for 2.3.0? ftp://ftp.lyx.org/pub/lyx/bin/2.3.0 If you test, which installer did you test: the "bundle" or the "installer"? Did you get a popup from the MiKTeX package manger during the installation process? If you just close that popup, does everything continue as normal? Do you get any other errors? After you install it, are you able to open Help > User Guide and compile it without error? Thanks, Scott
Windows users: can you test the 2.3.0 installer?
Dear Windows users, We received a report that the Windows installer lead to an error, so I would like to get some more testing before we announce the release. Can you test the installer for 2.3.0? ftp://ftp.lyx.org/pub/lyx/bin/2.3.0 If you test, which installer did you test: the "bundle" or the "installer"? Did you get a popup from the MiKTeX package manger during the installation process? If you just close that popup, does everything continue as normal? Do you get any other errors? After you install it, are you able to open Help > User Guide and compile it without error? Thanks, Scott signature.asc Description: PGP signature
Re: AW: document class Springer book isn´t available in lyx
On 02/27/2018 10:56 AM, a...@andreashegenbart.de wrote: On 02/27/2018 07:20 AM, a...@andreashegenbart.de wrote: Hi lyx users, my first problem in transforming my thesis (Komascript document class "scrartcl") into a springer book is: I updated Miktex 2.9 with the springer book document class "sr-vorl" synchronized it and reconfigurated "lyx 2.2.3" But I don´t find the document class in documents - settings of lyx. What can be the problem? Best Andreas I do not think there is a LyX layout for that document class (yet). There are layouts for two other Springer book classes, but I can't find one for sr- vorl. So you will need to create one. If either of the Springer book classes for which layouts exist (svmono, svmult) is similar to sr-vorl, it might be easiest to copy that layout someplace and edit it to match sr-vorl. Chapter 5 of the Customization help file describes the layout files. Good luck, Paul Thanks a lot - and I guess that´s what is to do now. Luck will be helpful And thanks again to Rich, because your attachment will be very helpful now as well. Andreas Andreas, If this is the only time you are likely to be using the sr-vorl class, hacking a layout file for it might not be worth the time. Since the LyX layout file is needed only to translate between the LaTeX class and what appears in the LyX GUI, you might consider the following alternative strategy. Write the document in either svmono or svmult, whichever is closer to sr-vorl, using the exiting LyX layout. When all the content editing is done, export the document to LaTeX, and then change the document class to sr-vorl in the LaTeX file. You may possibly encounter a few LaTeX errors that will need fixing, but I suspect it will be less work than hacking a one-time-use layout file. Paul
AW: document class Springer book isn´t available in lyx
> > On 02/27/2018 07:20 AM, a...@andreashegenbart.de wrote: > > Hi lyx users, > > > > my first problem in transforming my thesis (Komascript document class > > "scrartcl") into a springer book is: > > I updated Miktex 2.9 with the springer book document class "sr-vorl" > > synchronized it and reconfigurated "lyx 2.2.3" > > But I don´t find the document class in documents - settings of lyx. > > What can be the problem? > > > > Best > > Andreas > > > I do not think there is a LyX layout for that document class (yet). > There are layouts for two other Springer book classes, but I can't find one > for sr- > vorl. So you will need to create one. If either of the Springer book classes > for > which layouts exist (svmono, svmult) is similar to sr-vorl, it might be > easiest to > copy that layout someplace and edit it to match sr-vorl. Chapter 5 of the > Customization help file describes the layout files. > > Good luck, > Paul Thanks a lot - and I guess that´s what is to do now. Luck will be helpful And thanks again to Rich, because your attachment will be very helpful now as well. Andreas
AW: document class Springer book isn´t available in lyx
> On Tue, 27 Feb 2018, a...@andreashegenbart.de wrote: > > > my first problem in transforming my thesis (Komascript document class > > "scrartcl") into a springer book is: I updated Miktex 2.9 with the > > springer book document class "sr-vorl" synchronized it and > > reconfigurated "lyx 2.2.3" But I don´t find the document class in > > documents - settings of lyx. What can be the problem? > > Andreas, > >I used svmono for my book published by Springer. Copy of svmono.cls > attached. I also have these: > > /usr/share/lyx/layouts/svmono.layout > /usr/share/lyx/tex/svmono.cls > /usr/share/lyx/examples/springer/svmono_referenc.lyx > /usr/share/lyx/examples/springer/svmono_dedication.lyx > /usr/share/lyx/examples/springer/svmono_preface.lyx > /usr/share/lyx/examples/springer/svmono_acknow.lyx > /usr/share/lyx/examples/springer/svmono_book-master.lyx > /usr/share/lyx/examples/springer/svmono_appendix.lyx > /usr/share/lyx/examples/springer/svmono_part.lyx > /usr/share/lyx/examples/springer/svmono_glossary.lyx > /usr/share/lyx/examples/springer/svmono_foreword.lyx > /usr/share/lyx/examples/springer/svmono_solutions.lyx > /usr/share/lyx/examples/springer/svmono_chapter.lyx > /usr/share/lyx/examples/springer/svmono_acronym.lyx > > and will send whatever you want. > > Rich Thanks a lot, Rich I´m not sure if I´ll use it, because Springer gave me the description to sr-vorl.cls Best Andreas
Re: document class Springer book isn´t available in lyx
On 02/27/2018 07:20 AM, a...@andreashegenbart.de wrote: Hi lyx users, my first problem in transforming my thesis (Komascript document class "scrartcl") into a springer book is: I updated Miktex 2.9 with the springer book document class "sr-vorl" synchronized it and reconfigurated "lyx 2.2.3" But I don´t find the document class in documents - settings of lyx. What can be the problem? Best Andreas I do not think there is a LyX layout for that document class (yet). There are layouts for two other Springer book classes, but I can't find one for sr-vorl. So you will need to create one. If either of the Springer book classes for which layouts exist (svmono, svmult) is similar to sr-vorl, it might be easiest to copy that layout someplace and edit it to match sr-vorl. Chapter 5 of the Customization help file describes the layout files. Good luck, Paul
Re: document class Springer book isn´t available in lyx
On Tue, 27 Feb 2018, a...@andreashegenbart.de wrote: my first problem in transforming my thesis (Komascript document class "scrartcl") into a springer book is: I updated Miktex 2.9 with the springer book document class "sr-vorl" synchronized it and reconfigurated "lyx 2.2.3" But I don´t find the document class in documents - settings of lyx. What can be the problem? Andreas, I used svmono for my book published by Springer. Copy of svmono.cls attached. I also have these: /usr/share/lyx/layouts/svmono.layout /usr/share/lyx/tex/svmono.cls /usr/share/lyx/examples/springer/svmono_referenc.lyx /usr/share/lyx/examples/springer/svmono_dedication.lyx /usr/share/lyx/examples/springer/svmono_preface.lyx /usr/share/lyx/examples/springer/svmono_acknow.lyx /usr/share/lyx/examples/springer/svmono_book-master.lyx /usr/share/lyx/examples/springer/svmono_appendix.lyx /usr/share/lyx/examples/springer/svmono_part.lyx /usr/share/lyx/examples/springer/svmono_glossary.lyx /usr/share/lyx/examples/springer/svmono_foreword.lyx /usr/share/lyx/examples/springer/svmono_solutions.lyx /usr/share/lyx/examples/springer/svmono_chapter.lyx /usr/share/lyx/examples/springer/svmono_acronym.lyx and will send whatever you want. Rich% SVMONO DOCUMENT CLASS -- version 3.9 (23-Jul-03) % Springer Verlag global LaTeX2e support for monographs %% %% %% \CharacterTable %% {Upper-case\A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z %% Lower-case\a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z %% Digits\0\1\2\3\4\5\6\7\8\9 %% Exclamation \! Double quote \" Hash (number) \# %% Dollar\$ Percent \% Ampersand \& %% Acute accent \' Left paren\( Right paren \) %% Asterisk \* Plus \+ Comma \, %% Minus \- Point \. Solidus \/ %% Colon \: Semicolon \; Less than \< %% Equals\= Greater than \> Question mark \? %% Commercial at \@ Left bracket \[ Backslash \\ %% Right bracket \] Circumflex\^ Underscore\_ %% Grave accent \` Left brace\{ Vertical bar \| %% Right brace \} Tilde \~} %% \NeedsTeXFormat{LaTeX2e}[1995/12/01] \ProvidesClass{svmono}[2003/07/23 3.9 ^^JSpringer Verlag global LaTeX document class for monographs] % Options % citations \DeclareOption{natbib}{\ExecuteOptions{oribibl}% \AtEndOfClass{% Loading package 'NATBIB' \RequirePackage{natbib} % Changing some parameters of NATBIB \setlength{\bibhang}{\parindent} %\setlength{\bibsep}{0mm} \let\bibfont=\small \def\@biblabel#1{#1.} \newcommand{\etal}{\textit{et al}.} %\bibpunct[,]{(}{)}{;}{a}{}{,}}} }} % Springer environment \let\if@spthms\iftrue \DeclareOption{nospthms}{\let\if@spthms\iffalse} % \let\envankh\@empty % no anchor for "theorems" % \let\if@envcntreset\iffalse % environment counter is not reset \let\if@envcntresetsect=\iffalse % reset each section? \DeclareOption{envcountresetchap}{\let\if@envcntreset\iftrue} \DeclareOption{envcountresetsect}{\let\if@envcntreset\iftrue \let\if@envcntresetsect=\iftrue} % \let\if@envcntsame\iffalse % NOT all environments work like "Theorem", % each using its own counter \DeclareOption{envcountsame}{\let\if@envcntsame\iftrue} % \let\if@envcntshowhiercnt=\iffalse % do not show hierarchy counter at all % % enhance theorem counter \DeclareOption{envcountchap}{\def\envankh{chapter}% show \thechapter along with theorem number \let\if@envcntshowhiercnt=\iftrue \ExecuteOptions{envcountreset}} % \DeclareOption{envcountsect}{\def\envankh{section}% show \thesection along with theorem number \let\if@envcntshowhiercnt=\iftrue \ExecuteOptions{envcountreset}} % % languages \let\switcht@@therlang\relax \let\svlanginfo\relax \def\ds@deutsch{\def\switcht@@therlang{\switcht@deutsch}% \gdef\svlanginfo{\typeout{Man spricht deutsch.}\global\let\svlanginfo\relax}} \def\ds@francais{\def\switcht@@therlang{\switcht@francais}% \gdef\svlanginfo{\typeout{On parle francais.}\global\let\svlanginfo\relax}} % \AtBeginDocument{\@ifpackageloaded{babel}{% \@ifundefined{extrasenglish}{}{\addto\extrasenglish{\switcht@albion}}% \@ifundefined{extrasUKenglish}{}{\addto\extrasUKenglish{\switcht@albion}}% \@ifundefined{extrasfrenchb}{}{\addto\extrasfrenchb{\switcht@francais}}% \@ifundefined{extrasgerman}{}{\addto\extrasgerman{\switcht@deutsch}}% }{\switcht@@therlang}% } % numbering style of floats, equations \newif\if@numart \@numartfalse \DeclareOption{numart}{\@numarttrue} \def\set@numbering{\if@numart\else\num@book\fi} \AtEndOfClass{\set@numbering} % style for vectors \DeclareOption{vecphys}{\def\vec@style{phys}} \DeclareOption{vecarrow}{\def\vec@style{arrow}} % running heads \let\if@runhead\iftrue \DeclareOption{norunningheads}{\let\if@runhead\iffalse} % referee option \let\if@referee\iffalse \def\makereferee{\def\baselinestretch{2}\selectfont \newbox\refereebox \setbox\refereebox=\vbox to\z@{\vskip0.5cm%
document class Springer book isn´t available in lyx
Hi lyx users, my first problem in transforming my thesis (Komascript document class "scrartcl") into a springer book is: I updated Miktex 2.9 with the springer book document class "sr-vorl" synchronized it and reconfigurated "lyx 2.2.3" But I don´t find the document class in documents - settings of lyx. What can be the problem? Best Andreas -Ursprüngliche Nachricht- Von: lyx-users@lists.lyx.org [mailto:lyx-users@lists.lyx.org] Im Auftrag von a...@andreashegenbart.de Gesendet: Dienstag, 20. Februar 2018 12:45 An: 'Scott Kostyshak' Cc: 'Wolfgang Engelmann' ; lyx-users@lists.lyx.org Betreff: AW: Cannot determine size of graphic in the near future I´ll have to transform my thesis-format into a format for a book publication at Springer-Verlag. I got some latex-submittals srl-vorl.dtx and srl-vorl.ins from Springer and still don´t know how to insert in lyx. First I´ll try for myself, but I would be pleased to get some help later. Best Andreas