Re: Problem with bibliography compilation
That (leaving RTF) will happen if you mess with Microsoft products. What you really need to do is to get a proper BIB management tool, such as JabRef or BibDesk (on the Mac). The latter is my favorite. The you someplace like http://www.doi2bib.org nad have it generate the BIB for each reference and copy and paste into BibDesk's buffer to save into the final file. Other literature databases can also output in BIB. BibDesk also works with LyX, actually, which is very cool. el On 2016-09-21 15:27, Harold Mouras wrote: Dear LyX users, I meet a problem when trying to compile a bibliography. The system says "I was expecting an "="---line 10 of file 3_Users_UPJV_Google_Drive_Carri__re_2016_Postes_UoMontr__al_Application-Montreal.bib". However, when looking at thebib file attached I cannot see any place to put this "=". Any help would be very nice, Thanks, Harold -- Dr. Eberhard W. Lisse \/ Obstetrician & Gynaecologist (Saar) e...@lisse.na/ * | Telephone: +264 81 124 6733 (cell) PO Box 8421 \ / Bachbrecht, Namibia ;/
Re: Problem with bibliography compilation
Am Mittwoch, den 21.09.2016, 21:50 +0200 schrieb Harold Mouras:
> Dear all,
> thank you very much for your very kind help. I have now a much better
> file, but still telling me :
> "\newblock {\em Gait &
>
> posture}, 30(4):528--532, 2009.
>
> I can't figure out why you would want to use a tab mark
>
> here. If you just want an ampersand, the remedy is
>
> simple: Just type `I\&' now.
Well, just follow this advise, that is:
{Gait & posture} -> {Gait \& posture}
Jürgen
signature.asc
Description: This is a digitally signed message part
Re: Problem with bibliography compilation
Dear all,
thank you very much for your very kind help. I have now a much better
file, but still telling me :
"\newblock {\em Gait &
posture}, 30(4):528--532, 2009.
I can't figure out why you would want to use a tab mark
here. If you just want an ampersand, the remedy is
simple: Just type `I\&' now. But if some right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable."
and in the errors box:
"Misplaced alignment tab character &."
Sorry, my skillls in Bibtex should appear as very bad
Any help?
Thanks,
Harold
2016-09-21 17:18 GMT+02:00 Paul A. Rubin :
> On 09/21/2016 09:27 AM, Harold Mouras wrote:
>
> Dear LyX users,
>
> I meet a problem when trying to compile a bibliography. The system
> says "I was expecting an "="---line 10 of file
> 3_Users_UPJV_Google_Drive_Carri__re_2016_Postes_UoMontr__al_Application-Montreal.bib".
> However, when looking at thebib file attached I cannot see any place
> to put this "=".
>
> Any help would be very nice,
> Thanks,
> Harold
>
> Try removing the backslashes from line 9 (the first article) to the end. I'm
> not sure why they are there (search-replace run amok?), but they are
> spurious and causing the problem. I should issue a caveat: I did not check
> for any necessary uses of backslashes (e.g., embedded LaTeX macros) in the
> article entries.
>
> Paul
>
Application-Montreal-Corrigé.bib
Description: Binary data
Re: Problem with bibliography compilation
On 09/21/2016 09:27 AM, Harold Mouras wrote: Dear LyX users, I meet a problem when trying to compile a bibliography. The system says "I was expecting an "="---line 10 of file 3_Users_UPJV_Google_Drive_Carri__re_2016_Postes_UoMontr__al_Application-Montreal.bib". However, when looking at thebib file attached I cannot see any place to put this "=". Any help would be very nice, Thanks, Harold Try removing the backslashes from line 9 (the first article) to the end. I'm not sure why they are there (search-replace run amok?), but they are spurious and causing the problem. I should issue a caveat: I did not check for any /necessary/ uses of backslashes (e.g., embedded LaTeX macros) in the article entries. Paul
Re: Problem with bibliography compilation
Am Mittwoch, den 21.09.2016, 16:46 +0200 schrieb Jürgen Spitzmüller:
> See attachment, which should fix all these issues.
One remaining issue:
Gr{\\`e}zes -> Gr{\`e}zes
Jürgen
signature.asc
Description: This is a digitally signed message part
Re: Problem with bibliography compilation
Am Mittwoch, den 21.09.2016, 15:27 +0200 schrieb Harold Mouras:
> Dear LyX users,
>
> I meet a problem when trying to compile a bibliography. The system
> says "I was expecting an "="---line 10 of file
> 3_Users_UPJV_Google_Drive_Carri__re_2016_Postes_UoMontr__al_Applicati
> on-Montreal.bib".
> However, when looking at thebib file attached I cannot see any place
> to put this "=".
This file has several problems.
* Line 1--8 seem to be complete garbage. Remove them.
* Line 78f. and 101f.: dito.
* Several brackets are escaped by backslash, i.e. \{ and \} instead of
{ and }. Remove the backslashes.
* Also, remove the trailing \ in the lines.
See attachment, which should fix all these issues.
How did you generate this file?
Jürgen
>
> Any help would be very nice,
> Thanks,
> Harold@article{preston2002empathy,
title={Empathy: Its ultimate and proximate bases},
author={Preston, Stephanie D and De Waal, Frans BM and others},
journal={Behavioral and brain sciences},
volume={25},
number={1},
pages={1--20},
year={2002},
publisher={Cambridge Univ Press}
}
@article{levenson1992empathy,
title={Empathy: a physiological substrate.},
author={Levenson, Robert W and Ruef, Anna M},
journal={Journal of personality and social psychology},
volume={63},
number={2},
pages={234},
year={1992},
publisher={American Psychological Association}
}
@book{darwin1965expression,
title={The expression of the emotions in man and animals},
author={Darwin, Charles},
volume={526},
year={1965},
publisher={University of Chicago press}
}
@article{lang1997motivated,
title={Motivated attention: Affect, activation, and action},
author={Lang, Peter J and Bradley, Margaret M and Cuthbert, Bruce N and others},
journal={Attention and orienting: Sensory and motivational processes},
pages={97--135},
year={1997},
publisher={Hillsdale, NJ}
}
@article{brown2006effect,
title={The effect of anxiety on the regulation of upright standing among younger and older adults},
author={Brown, Lesley A and Polych, Melody A and Doan, Jon B},
journal={Gait \& posture},
volume={24},
number={4},
pages={397--405},
year={2006},
publisher={Elsevier}
}
@article{sibley2007effects,
title={Effects of postural anxiety on the soleus H-reflex},
author={Sibley, Kathryn M and Carpenter, Mark G and Perry, Jennifer C and Frank, James S},
journal={Human movement science},
volume={26},
number={1},
pages={103--112},
year={2007},
publisher={Elsevier}
}
@article{huffman2009does,
title={Does increased postural threat lead to more conscious control of posture?},
author={Huffman, Jennifer L and Horslen, BC and Carpenter, MG and Adkin, Allan L},
journal={Gait \& posture},
volume={30},
number={4},
pages={528--532},
year={2009},
publisher={Elsevier}
}
@article{batson1997perspective,
title={Perspective taking: Imagining how another feels versus imaging how you would feel},
author={Batson, C Daniel and Early, Shannon and Salvarani, Giovanni},
journal={Personality and social psychology bulletin},
volume={23},
number={7},
pages={751--758},
year={1997},
publisher={Sage Publications}
}
@article{decety2006power,
title={The power of simulation: imagining one's own and other's behavior},
author={Decety, Jean and Gr{\\`e}zes, Julie},
journal={Brain research},
volume={1079},
number={1},
pages={4--14},
year={2006},
publisher={Elsevier}
}
signature.asc
Description: This is a digitally signed message part
Problem with bibliography compilation
Dear LyX users, I meet a problem when trying to compile a bibliography. The system says "I was expecting an "="---line 10 of file 3_Users_UPJV_Google_Drive_Carri__re_2016_Postes_UoMontr__al_Application-Montreal.bib". However, when looking at thebib file attached I cannot see any place to put this "=". Any help would be very nice, Thanks, Harold Application-Montreal.bib Description: Binary data
elsarticle problem with bibliography
Hi, I am trying to use the LyX template for Elsevier articles (elsarticle), and I have the following problem. I want to refer to various bibliographic items by numbers (no author names), for example: "As was shown in [10], bla bla" and I want to make the reference list manually, that is without using BibTeX. Whatever format of bibliography I choose in Document settings, in the pdf file I always get something like: "As was shown in (Author??) [10], bla, bla" Is there any way to get rid of that "(Author ??)" phrase? Leslaw
Re: Problem with bibliography display
On 07/02/2012 2:38 PM, YE WENG wrote:
When using document class{revtex4-1}, I just simply cited one reference,
but after viewing the output two other references appeared before the
reference I cited. They are like
"[1]
[2] 08 (1). " with almost empty information.
I tried to look the errors using .tex file. It showed
\bibitem{REVTEX41Control}
\bibitem{apsrev41Control}
08 (1).
I don't know what happened here since this does not happen in other
document class.
Anyone can help me with this problem, thank you.
With this document class you /must/ use one of the bibliography style
provided by APS for revtex 4.1, there is no guarantee that any other
bibliography style will provide good output (and in fact they don't,
unless you modify them to ignore any @CONTROL bibtex entries).
Regards,
Julien
Problem with bibliography display
When using document class{revtex4-1}, I just simply cited one reference,
but after viewing the output two other references appeared before the
reference I cited. They are like
"[1]
[2] 08 (1). " with almost empty information.
I tried to look the errors using .tex file. It showed
\bibitem{REVTEX41Control}
\bibitem{apsrev41Control}
08 (1).
I don't know what happened here since this does not happen in other
document class.
Anyone can help me with this problem, thank you.
Re: problem with bibliography
2009/7/30 Sam Liddicott : > * Beny Spira wrote, On 29/07/09 22:05: >> Thanks to all that replied >> >> It turned out the problem was in some references that contained URL with >> special characteres. I deleted the URLs and the problem vanished. > > > So... is that a Tex bug? Will you get a cheque for $655.36 ? In the worst case here this is a bug in one of LaTeX packages, not a TeX itself. -- Manveru jabber: manv...@manveru.pl gg: 1624001 http://www.manveru.pl
Re: problem with bibliography
* Beny Spira wrote, On 29/07/09 22:05: > Thanks to all that replied > > It turned out the problem was in some references that contained URL with > special characteres. I deleted the URLs and the problem vanished. So... is that a Tex bug? Will you get a cheque for $655.36 ? Sam
Re: problem with bibliography
Thanks to all that replied
It turned out the problem was in some references that contained URL with
special characteres. I deleted the URLs and the problem vanished.
Cheers,
Beny
On 07/28/2009 03:42 PM, Beny Spira wrote:
>
>> Hi
>>
>> I was using package abnt and got the following error:
>>
>> *TeX capacity exceeded, sorry [parameter stack size=6000].
>> *
>>
>> *
>> *
>>
>> * \begin{thebibliography}{19}*
>>
>> * *
>>
>> *If you really absolutely need more capacity,*
>>
>> *you can ask a wizard to enlarge me.*
>>
>>
>>
>> I read elsewhere that this kind of error is sometimes due to an open
>> parenthesis in the preamble. However, my preamble is very short and could
>> not find any problem there.
>>
>> When bibliography is removed the output is just fine.
>>
>> Any suggestion of what might be wrong?
>>
>>
>>
> Probably an error in the BibTeX file?
>
> rh
>
>
Re: problem with bibliography
On 07/28/2009 03:42 PM, Beny Spira wrote:
Hi
I was using package abnt and got the following error:
*TeX capacity exceeded, sorry [parameter stack size=6000].
*
*
*
* \begin{thebibliography}{19}*
* *
*If you really absolutely need more capacity,*
*you can ask a wizard to enlarge me.*
I read elsewhere that this kind of error is sometimes due to an open
parenthesis in the preamble. However, my preamble is very short and could
not find any problem there.
When bibliography is removed the output is just fine.
Any suggestion of what might be wrong?
Probably an error in the BibTeX file?
rh
problem with bibliography
Hi
I was using package abnt and got the following error:
*TeX capacity exceeded, sorry [parameter stack size=6000].
*
*
*
* \begin{thebibliography}{19}*
* *
*If you really absolutely need more capacity,*
*you can ask a wizard to enlarge me.*
I read elsewhere that this kind of error is sometimes due to an open
parenthesis in the preamble. However, my preamble is very short and could
not find any problem there.
When bibliography is removed the output is just fine.
Any suggestion of what might be wrong?
Beny
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)
thank you!
In the meantime, I fixed some of my problems and I'm pretty happy with
the results.
- part of my problem apparently was a bad bib-file, which I fixed now.
- I found a good solution for deleting the short titles from my
reference list: \renewcomma...@biblabel[1]{} in the LateX preamble did
the trick. I found the suggestion here:
http://texnik.dante.de/cgi-bin/mainFAQ.cgi?file=bibtex/bibtex#nolabel
- I did manage to change the square brackets around the citations in
the text to round ones with:
\renewcomman...@cite}[2]{({#1...@tempswa , #2\fi})} in the preamble
I am still looking for a way to get rid of the brackets around the
year in my citations. Right now, they look like this: (Talos(2008)),
and I want them to look like (Talos 2008).
so, if anybody has suggestions, that would be great!
apart from that though, I'm very happy with the results for now.
2009/7/1 李猛 :
> I chose the elsarticle-harv and changed every citation using formatting
> ->citation style in document.
> can you please provide a _small_ LyX example file to be able to reproduce
> the problem?
>
>
> 2009/7/1 Lea Rennert
>>
>> thank you very much for your reply!
>> what style did you choose for the bibliography itself? (when you right
>> click on "BibTeX Generated Bibliography" -> Settings... to choose the
>> bib-file and the citation style from the list)
>>
>> I ask because, unfortunately, the preamble produced two error messages
>> for me (see below). but maybe it depends on what corresponding style
>> you choose? (I did choose natbib in Document -> Settings ->
>> Bibliography...)
>>
>> The error messages:
>>
>> Undefined control sequence.
>> \bibpunct
>> {(}{)}{,}{a}{,}{,}
>> The control sequence at the end of the top line
>> of your error message was never \def'ed. If you have
>> misspelled it (e.g., `\hobx'), type `I' and the correct
>> spelling (e.g., `I\hbox'). Otherwise just continue,
>> and I'll forget about whatever was undefined.
>>
>> LaTeX Error: Missing \begin{document}.
>> \bibpunct{(
>>}{)}{,}{a}{,}{,}
>> You're in trouble here. Try typingto proceed.
>> If that doesn't work, type X to quit.
>>
>>
>>
>>
>> 2009/6/26 李猛 :
>> > The solution works for me.
>> >
>> > See http://wiki.lyx.org/LyX/HumanitiesLyX
>> >
>> > Using Natbib
>> >
>> > To set up LyX to use natbib, go to Document→Settings→Bibliography and
>> > check
>> > natbib.
>> >
>> > Add the following line to your LaTeX preamble:
>> >
>> > \bibpunct{(}{)}{,}{a}{,}{,}
>> >
>> > This specifies in-text punctuation options for citations, i.e., Author
>> > (Year), commas between citations, and so on. See the natbib
>> > documentation
>> > for details.
>> >
>> > --
>> > Albert
>> > Lab of Complex System and Artificial Intelligence,
>> > Institute of Automation,Chinese Academy of Sciences(CASIA)
>> > Beijing, 100190,P.R.CHINA
>> >
>> >
>> >
>
>
>
> --
> Albert
> Lab of Complex System and Artificial Intelligence,
> Institute of Automation,Chinese Academy of Sciences(CASIA)
> Beijing, 100190,P.R.CHINA
>
>
>
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)
I chose the elsarticle-harv and changed every citation using formatting
->citation style in document.
can you please provide a _small_ LyX example file to be able to reproduce
the problem?
2009/7/1 Lea Rennert
> thank you very much for your reply!
> what style did you choose for the bibliography itself? (when you right
> click on "BibTeX Generated Bibliography" -> Settings... to choose the
> bib-file and the citation style from the list)
>
> I ask because, unfortunately, the preamble produced two error messages
> for me (see below). but maybe it depends on what corresponding style
> you choose? (I did choose natbib in Document -> Settings ->
> Bibliography...)
>
> The error messages:
>
> Undefined control sequence.
> \bibpunct
> {(}{)}{,}{a}{,}{,}
> The control sequence at the end of the top line
> of your error message was never \def'ed. If you have
> misspelled it (e.g., `\hobx'), type `I' and the correct
> spelling (e.g., `I\hbox'). Otherwise just continue,
> and I'll forget about whatever was undefined.
>
> LaTeX Error: Missing \begin{document}.
> \bibpunct{(
>}{)}{,}{a}{,}{,}
> You're in trouble here. Try typingto proceed.
> If that doesn't work, type X to quit.
>
>
>
>
> 2009/6/26 李猛 :
> > The solution works for me.
> >
> > See http://wiki.lyx.org/LyX/HumanitiesLyX
> >
> > Using Natbib
> >
> > To set up LyX to use natbib, go to Document→Settings→Bibliography and
> check
> > natbib.
> >
> > Add the following line to your LaTeX preamble:
> >
> > \bibpunct{(}{)}{,}{a}{,}{,}
> >
> > This specifies in-text punctuation options for citations, i.e., Author
> > (Year), commas between citations, and so on. See the natbib documentation
> > for details.
> >
> > --
> > Albert
> > Lab of Complex System and Artificial Intelligence,
> > Institute of Automation,Chinese Academy of Sciences(CASIA)
> > Beijing, 100190,P.R.CHINA
> >
> >
> >
>
--
Albert
Lab of Complex System and Artificial Intelligence,
Institute of Automation,Chinese Academy of Sciences(CASIA)
Beijing, 100190,P.R.CHINA
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)
thank you very much for your reply!
what style did you choose for the bibliography itself? (when you right
click on "BibTeX Generated Bibliography" -> Settings... to choose the
bib-file and the citation style from the list)
I ask because, unfortunately, the preamble produced two error messages
for me (see below). but maybe it depends on what corresponding style
you choose? (I did choose natbib in Document -> Settings ->
Bibliography...)
The error messages:
Undefined control sequence.
\bibpunct
{(}{)}{,}{a}{,}{,}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.
LaTeX Error: Missing \begin{document}.
\bibpunct{(
}{)}{,}{a}{,}{,}
You're in trouble here. Try typingto proceed.
If that doesn't work, type X to quit.
2009/6/26 李猛 :
> The solution works for me.
>
> See http://wiki.lyx.org/LyX/HumanitiesLyX
>
> Using Natbib
>
> To set up LyX to use natbib, go to Document→Settings→Bibliography and check
> natbib.
>
> Add the following line to your LaTeX preamble:
>
> \bibpunct{(}{)}{,}{a}{,}{,}
>
> This specifies in-text punctuation options for citations, i.e., Author
> (Year), commas between citations, and so on. See the natbib documentation
> for details.
>
> --
> Albert
> Lab of Complex System and Artificial Intelligence,
> Institute of Automation,Chinese Academy of Sciences(CASIA)
> Beijing, 100190,P.R.CHINA
>
>
>
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)
The solution works for me.
See http://wiki.lyx.org/LyX/HumanitiesLyX
Using NatbibTo set up LyX to use natbib, go to
Document→Settings→Bibliography and check natbib.
Add the following line to your LaTeX preamble:
\bibpunct{(}{)}{,}{a}{,}{,}
This specifies in-text punctuation options for citations, i.e., Author
(Year), commas between citations, and so on. See the natbib documentation
for details.
--
Albert
Lab of Complex System and Artificial Intelligence,
Institute of Automation,Chinese Academy of Sciences(CASIA)
Beijing, 100190,P.R.CHINA
Re: Problem with Bibliography author-year style in document class
> I do not know why the name of the author (Aiginger) is repeated so remove that particular entry from the bib file. Does it work then? > I tried different encodings when I exported my references from citavi > to bibtex (UTF-8, US-ASCII, Western European (ISO), ...) but nothing > changed. Is there a specific encoding I should use? I think that ISO should do.
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)"
Thank you! I fixed my bib-file (it did miss a year!), so that was
certainly good advice. I also downloaded some additional packages
through Miktex and tried out some other citation styles. Some of them
work (such as apalike or plain), but the ones I would need don't.
The citation styles that don't work all give me a lot of error
messages saying "Undefined control sequence." and the error
descriptions look something like this (this one came when I used the
style chicago):
" ...r{Aiginger}{Aiginger}{2007}]{Aiginger.2007}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined."
I do not know why the name of the author (Aiginger) is repeated so
often, that is not the case in my bib-file. In other error messages,
symbols like % suddenly appear in the text where there are non in the
bibtex file.
Does anybody know what the problem might be?
I tried different encodings when I exported my references from citavi
to bibtex (UTF-8, US-ASCII, Western European (ISO), ...) but nothing
changed. Is there a specific encoding I should use?
Thank you!
Lea
On Mon, Jun 15, 2009 at 8:07 PM, rgheck wrote:
> Lea Rennert wrote:
>>
>> In Document > Settings > Bibliography I chose natbib with author-year
>> style. I inserted the Bibliography through Insert > List/TOC..., where
>> I uploaded my .bib-file.
>> When I choose the style "plain", creating a pdf works without
>> problems, but the Bibliography shows up using numbers, both in the
>> Text - e.g.: [2, 192] - and in the Bibliography, which is not what I
>> want.
>>
>>
>
> This is almost always due to some sort of error in your bib file. A missing
> year in an entry, for example, will force BibTeX to use numerical citations
> rather than author-year citations.
>
>> All the other styles I've tried (natbib, plainnat, apacite, ...)
>> produce various error messages when I create a PDF, and in the PDF the
>> Bibliography is all garbled up (Authors' names appear several times,
>> the German Umlaut-Letters like ö/ä/ü are not printed, formatting is
>> messed up, etc.).
>>
>>
>
> If these are written with umlauts in the bib file, that also could cause a
> problem. It depends very much upon encoding issues and the like.
>
>> I have been looking for a solution for hours now, and I am just not
>> sure where my problem lies or what to do next. Should I try changing
>> the document settings in Lyx (in the Preamble, for example)? Or do I
>> need a program to edit the bib-file? Which program would be easy to
>> use on windows? Or could the problem be that my .bib-file is not
>> configured right?
>>
>>
>
> A bib file is just a text file, so you can open it in notepad or whatever.
> But you might want to use something like JabRef, which will give you a nice
> interface to the file.
>
> Richard
>
>
Re: Problem with Bibliography author-year style in document class "book (KOMA-script)"
Lea Rennert wrote: In Document > Settings > Bibliography I chose natbib with author-year style. I inserted the Bibliography through Insert > List/TOC..., where I uploaded my .bib-file. When I choose the style "plain", creating a pdf works without problems, but the Bibliography shows up using numbers, both in the Text - e.g.: [2, 192] - and in the Bibliography, which is not what I want. This is almost always due to some sort of error in your bib file. A missing year in an entry, for example, will force BibTeX to use numerical citations rather than author-year citations. All the other styles I've tried (natbib, plainnat, apacite, ...) produce various error messages when I create a PDF, and in the PDF the Bibliography is all garbled up (Authors' names appear several times, the German Umlaut-Letters like ö/ä/ü are not printed, formatting is messed up, etc.). If these are written with umlauts in the bib file, that also could cause a problem. It depends very much upon encoding issues and the like. I have been looking for a solution for hours now, and I am just not sure where my problem lies or what to do next. Should I try changing the document settings in Lyx (in the Preamble, for example)? Or do I need a program to edit the bib-file? Which program would be easy to use on windows? Or could the problem be that my .bib-file is not configured right? A bib file is just a text file, so you can open it in notepad or whatever. But you might want to use something like JabRef, which will give you a nice interface to the file. Richard
Problem with Bibliography author-year style in document class "book (KOMA-script)"
Hi, I am writing my thesis in the book (KOMA-script) - class, and need my citations in author-year style in the text (e.g., xxx (Freud 1928, 15) xxx), and sorted by author (not numbered) in the bibliography. I am maintaining my literature-database in citavi, from where I can export the references into .bib documents. I am working with Lyx 1.6.2 on windows, and I did not use a bibtex-editor or anything like that. In Document > Settings > Bibliography I chose natbib with author-year style. I inserted the Bibliography through Insert > List/TOC..., where I uploaded my .bib-file. When I choose the style "plain", creating a pdf works without problems, but the Bibliography shows up using numbers, both in the Text - e.g.: [2, 192] - and in the Bibliography, which is not what I want. All the other styles I've tried (natbib, plainnat, apacite, ...) produce various error messages when I create a PDF, and in the PDF the Bibliography is all garbled up (Authors' names appear several times, the German Umlaut-Letters like ö/ä/ü are not printed, formatting is messed up, etc.). I have been looking for a solution for hours now, and I am just not sure where my problem lies or what to do next. Should I try changing the document settings in Lyx (in the Preamble, for example)? Or do I need a program to edit the bib-file? Which program would be easy to use on windows? Or could the problem be that my .bib-file is not configured right? I hope for someone with more experience it is easier to tell where I went wrong... :-) Thank you so much for your help! Lea
Re: question about section problem with bibliography
Brian Kidd wrote: Hello all, I have come across a strange situation where the output for my references is appearing below the section heading (see attached picture). I'm using the article class and normally references appear in the proper \section* format. However, something is bad in this case and the references appears below the section. Does anyone have any suggestions to look at or ways to fix this? I've used the BibTeX generated bibliography a number of times and never had this issue come up. Thanks, -Brian I'm not sure what I'm looking at in the picture (big J, asterisk, "References" heading, nothing else). Did it get posted intact? Perhaps you could post a minimal example (.lyx + .bib)? /Paul
question about section problem with bibliography
Hello all, I have come across a strange situation where the output for my references is appearing below the section heading (see attached picture). I'm using the article class and normally references appear in the proper \section* format. However, something is bad in this case and the references appears below the section. Does anyone have any suggestions to look at or ways to fix this? I've used the BibTeX generated bibliography a number of times and never had this issue come up. Thanks, -Brian Picture 1.png Description: application/applefile <>
Re: Problem with bibliography and hyperref
Rainer M Krug schrieb: I have a problem with the hyperref package and a bibtex bibliography (elsart-harv.bst) and urls (see attached screenshot). I already set breaklinks=true, but the URLs in the bibliography are still longer then one line. Any ideas? (below please find my preamble) Are you using the command \url or \href for links? hyperref settings only have an effect on \href. regards Uwe
Problem with bibliography and hyperref
Hi
I have a problem with the hyperref package and a bibtex bibliography
(elsart-harv.bst) and urls (see attached screenshot). I already set
breaklinks=true, but the URLs in the bibliography are still longer then
one line. Any ideas? (below please find my preamble)
Any help appreciated,
Rainer
%% LyX 1.4.3 created this file. For more info, see http://www.lyx.org/.
%% Do not edit unless you really know what you are doing.
\documentclass[11pt,a4paper,twoside,british,PhD,afrikaans,english,backref=page,colorlinks=true]{usthesis}
\usepackage{times}
\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage{array}
\usepackage{amsmath}
\usepackage{graphicx}
\usepackage{setspace}
\doublespacing
\usepackage[authoryear]{natbib}
\makeatletter
%% LyX specific LaTeX commands.
\newcommand{\noun}[1]{\textsc{#1}}
%% Because html converters don't know tabularnewline
\providecommand{\tabularnewline}{\\}
%% Textclass specific LaTeX commands.
\usepackage[afrikaans, UKenglish]{babel}
\usepackage{color}
\definecolor{USmaroon}{rgb}{0.375,0.1328,0.2305}
\definecolor{USgray}{rgb}{0.5469,0.5895,0.6016}
\usepackage{graphicx}
\usepackage[backref=page,breaklinks=true,colorlinks=true]{hyperref}
\usepackage{thumbpdf}
\usepackage{textcomp}
\usepackage{lmodern}
\usepackage{microtype}
\newcommand{\address}{\adress} % spelling mistake in USThesis
\AtBeginDocument{\renewcommand\bibname{References}}
%% User specified LaTeX commands.
\usepackage{thumbpdf}
\usepackage{textcomp}
\usepackage{lmodern}
\usepackage{chapterbib}
--
Rainer M. Krug, Dipl. Phys. (Germany), MSc Conservation
Biology (UCT)
Department of Conservation Ecology and Entomology
University of Stellenbosch
Matieland 7602
South Africa
Tel:+27 - (0)72 808 2975 (w)
Fax:+27 - (0)86 516 2782
Fax:+27 - (0)21 808 3304 (w)
Cell: +27 - (0)83 9479 042
email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
Re: problem with bibliography
Am Sonntag, 15. Februar 2004 19:12 schrieb Harold Mouras: > > Dear Lyx users, > I have a little problem regarding the formatting of my bibliography. When > create a document into Lyx with the appropriate settings, all works find > compiling the document regarding the bibliography. But when I export the > same document in latex format from Lyx, when I latex thos document, any > reference is no more found and the bibliography not formatted. > Would anyone have an idea about this problem? You must also run bibtex, e.g. latex mydoc bibtex mydoc latex mydoc That should work. Note that bibtex must be called without the .tex suffix. Georg
problem with bibliography
Dear Lyx users, I have a little problem regarding the formatting of my bibliography. When I create a document into Lyx with the appropriate settings, all works find compiling the document regarding the bibliography. But when I export the same document in latex format from Lyx, when I latex thos document, any reference is no more found and the bibliography not formatted. Would anyone have an idea about this problem? THank you very much in advance, Harold - --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.588 / Virus Database: 372 - Release Date: 13/02/2004
