Hello Uwe,
thank you. I didn´t know that there is a template – this helps a lot.
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no texmf in /usr/share/… Instead I found texmf in
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no texmf in /usr/share/… Instead I found texmf in
/usr/local/texlive/2008, but in the doc-folder there is not latex-folder)
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script
UserGuide, which I searched out of Lyx and in my \usr-folder also.
There it is, thank you!
Best regards*
Jessika
Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I
christiaan pauw wrote:
Hi everybody
dvips knows 68 standard colours (see then at h t t p ://
en.wikibooks.org/wiki/LaTeX/Colors#The_68_standard_colors_known_to_dvips )
that have names. Some of them are quite beautiful. How can I use these named
colours is Lyx - for example to define text colours
On Thu, Jun 4, 2009 at 7:12 AM, jezZiFeR jezzi...@googlemail.com wrote:
There it is, thank you!
Best regards*
Jessika
Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
As a general
Hello,
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don
´t know where to specify letter head and foot definitions.
Additionally I tried to enter the bank-account in the template, where
it´s also not
Dear Gurus for lyx/latex,
I am trying to trace a citation error in my document (koma, book, 2 column,
debian). I divided the document in a master and several subdocuments.
I am getting in /tmp/lyx_tmpdir.TJ4198/lyx_tmpbuf directories for the master
and the subdocuments.
Could somebody explain
How about Xcolor and:
xcolor=dvipsnames
Uwe Stöhr wrote:
Asm_gmail schrieb:
Thanks Uwe for your patience to help me.
Well, I don't understand why you think that you have a problem. You want
a Type1 font and get it so it should be perfect for you.
Also, I can define these in:
Lyx:reference - Output - Latex - tex encoding: OT1
Public release of LyX version 1.6.3
===
We are pleased to announce the release of LyX 1.6.3. This is the third
maintenance release in the 1.6.x series. Besides the usual improvements
of stability, the highlights of this release are:
* tex2lyx is now able to read
Marcelo Reis wrote:
Manveru wrote:
2009/6/3 Marcelo Reis marceb...@yahoo.com.br:
Guys,
Can please someone help me on how to reproduce the page border of the
attached PDF File?
(I created it using MS Word)
I know about FancyBox, but I was not able to define the border the
way I
want.
What
jezZiFeR schrieb:
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don´t
know where to specify letter head and foot definitions.
But this is described with all details and many examples in the koma-script
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I get a
James C. Sutherland wrote:
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I
Hello LyXers,
the alternative Windows installer for LyX 1.6.3 is now available.
This installer comes again with an update installer to update existing LyX
1.6.2 installation to LyX
1.6.3. NOTE: To be able to use this installer version, LyX 1.6.2 must have been
installed with the
alternative
Hi Friends
I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
the rigth) corner on a page,
and below of the figure i want to write a title. Do you knonw how to do this
in Lyx ?
Do you know how to set the offset between the figure and the title?
I have set books (more font
Replying to my own question:
On 2009-06-03 22:40, Gregory Jefferis jeffe...@gmail.com wrote:
I want to do a respectable export of to something that Word can open for final
submission to a journal. My document has bibtex references and multiple
figures (present as floats from which I have
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
WAS
On Thu, 2009-06-04 at 21:34 +0200, Uwe Stöhr wrote:
Hello LyXers,
the alternative
Waluyo Adi Siswanto schrieb:
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
Give it some hours. But I also wrote:
The installer for
Marcelo Reis marceb...@... writes:
SorryHere is the link to the image file (converted from a DOC file):
http://img23.imageshack.us/img23/1791/bordern.png
Hey Guys, No ideas?!?!
Put the following lines in the preamble and adjust as needed.
\usepackage{eso-pic}
Installed Lyx version 1.6.2 and CocoAspell version 2.0.4 on Mac
version 10.5.7
When spell checking a document in Lyx I couldn't add words to the
dictionary.
After some web searching I discovered a fix is to comment the line
home-dir $HOME/Library/Preferences/aspell in file
Adrian Diaz aedmci...@... writes:
I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
the rigth) corner on a page,
and below of the figure i want to write a title. Do you knonw how to do this
in Lyx ?
Do you know how to set the offset between the figure and the title?
Dear Gurus,
sometimes even in Lyx you do something wrong and you get an error message. Most
of the time they are not very usefull - they simply indicate that something went
wrong with a short excerpt of what caused the trouble - the excerpt however is
not enough (for me at least) to find out what
Hi there,
me again - somehow related to my previous post but
this can be a separate question:
when I export to plain Latex (when Bug-hunting) the exportation
takes ages...okay I got a lot of high resolution PNGs in there -
so I put all pictures in Draft mode...alas, this did not help
and it
Wolfgang Engelmann engelm...@... writes:
[snip]
The reason is, that I have difficulties to localize the citation error,
because even after taking out the offending citation lyx is still complaining
about it. I have to close lyx and reopen it until I get the response after
removing. I
Hello, my name is Tabaré and I have the following problem:
I´m using lyx 1.6.2 with windows vista for my project in the university of
Uruguay and I´m doing this in spanish. The problem is that I´m using book koma
script and in lyx I can see all the document ok but when I convert to pdf the
TeXnicCenter let's you browse through the errors and puts you to the right
place, which is very very helpfull.
LyX does this as well. What do you miss? More longer excerpts from the error
messages?
Jürgen
Is there a way to export only the text,not the pictures...?
No(t yet), but we have a feature request for this:
http://www.lyx.org/trac/ticket/3890
Jürgen
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
Give it some hours.
It's there now.
Jürgen
On 2009-06-05, Jürgen Spitzmüller wrote:
TeXnicCenter let's you browse through the errors and puts you to the right
place, which is very very helpfull.
LyX does this as well. What do you miss?
In many cases LyX is not able to find the true location of the
offending code (e.g. if inside a
Hello Uwe,
thank you. I didn´t know that there is a template – this helps a lot.
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no texmf in /usr/share/… Instead I found texmf in
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no texmf in /usr/share/… Instead I found texmf in
/usr/local/texlive/2008, but in the doc-folder there is not latex-folder)
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script
UserGuide, which I searched out of Lyx and in my \usr-folder also.
There it is, thank you!
Best regards*
Jessika
Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I
christiaan pauw wrote:
Hi everybody
dvips knows 68 standard colours (see then at h t t p ://
en.wikibooks.org/wiki/LaTeX/Colors#The_68_standard_colors_known_to_dvips )
that have names. Some of them are quite beautiful. How can I use these named
colours is Lyx - for example to define text colours
On Thu, Jun 4, 2009 at 7:12 AM, jezZiFeR jezzi...@googlemail.com wrote:
There it is, thank you!
Best regards*
Jessika
Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
As a general
Hello,
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don
´t know where to specify letter head and foot definitions.
Additionally I tried to enter the bank-account in the template, where
it´s also not
Dear Gurus for lyx/latex,
I am trying to trace a citation error in my document (koma, book, 2 column,
debian). I divided the document in a master and several subdocuments.
I am getting in /tmp/lyx_tmpdir.TJ4198/lyx_tmpbuf directories for the master
and the subdocuments.
Could somebody explain
How about Xcolor and:
xcolor=dvipsnames
Uwe Stöhr wrote:
Asm_gmail schrieb:
Thanks Uwe for your patience to help me.
Well, I don't understand why you think that you have a problem. You want
a Type1 font and get it so it should be perfect for you.
Also, I can define these in:
Lyx:reference - Output - Latex - tex encoding: OT1
Public release of LyX version 1.6.3
===
We are pleased to announce the release of LyX 1.6.3. This is the third
maintenance release in the 1.6.x series. Besides the usual improvements
of stability, the highlights of this release are:
* tex2lyx is now able to read
Marcelo Reis wrote:
Manveru wrote:
2009/6/3 Marcelo Reis marceb...@yahoo.com.br:
Guys,
Can please someone help me on how to reproduce the page border of the
attached PDF File?
(I created it using MS Word)
I know about FancyBox, but I was not able to define the border the
way I
want.
What
jezZiFeR schrieb:
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don´t
know where to specify letter head and foot definitions.
But this is described with all details and many examples in the koma-script
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I get a
James C. Sutherland wrote:
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I
Hello LyXers,
the alternative Windows installer for LyX 1.6.3 is now available.
This installer comes again with an update installer to update existing LyX
1.6.2 installation to LyX
1.6.3. NOTE: To be able to use this installer version, LyX 1.6.2 must have been
installed with the
alternative
Hi Friends
I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
the rigth) corner on a page,
and below of the figure i want to write a title. Do you knonw how to do this
in Lyx ?
Do you know how to set the offset between the figure and the title?
I have set books (more font
Replying to my own question:
On 2009-06-03 22:40, Gregory Jefferis jeffe...@gmail.com wrote:
I want to do a respectable export of to something that Word can open for final
submission to a journal. My document has bibtex references and multiple
figures (present as floats from which I have
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
WAS
On Thu, 2009-06-04 at 21:34 +0200, Uwe Stöhr wrote:
Hello LyXers,
the alternative
Waluyo Adi Siswanto schrieb:
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
Give it some hours. But I also wrote:
The installer for
Marcelo Reis marceb...@... writes:
SorryHere is the link to the image file (converted from a DOC file):
http://img23.imageshack.us/img23/1791/bordern.png
Hey Guys, No ideas?!?!
Put the following lines in the preamble and adjust as needed.
\usepackage{eso-pic}
Installed Lyx version 1.6.2 and CocoAspell version 2.0.4 on Mac
version 10.5.7
When spell checking a document in Lyx I couldn't add words to the
dictionary.
After some web searching I discovered a fix is to comment the line
home-dir $HOME/Library/Preferences/aspell in file
Adrian Diaz aedmci...@... writes:
I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
the rigth) corner on a page,
and below of the figure i want to write a title. Do you knonw how to do this
in Lyx ?
Do you know how to set the offset between the figure and the title?
Dear Gurus,
sometimes even in Lyx you do something wrong and you get an error message. Most
of the time they are not very usefull - they simply indicate that something went
wrong with a short excerpt of what caused the trouble - the excerpt however is
not enough (for me at least) to find out what
Hi there,
me again - somehow related to my previous post but
this can be a separate question:
when I export to plain Latex (when Bug-hunting) the exportation
takes ages...okay I got a lot of high resolution PNGs in there -
so I put all pictures in Draft mode...alas, this did not help
and it
Wolfgang Engelmann engelm...@... writes:
[snip]
The reason is, that I have difficulties to localize the citation error,
because even after taking out the offending citation lyx is still complaining
about it. I have to close lyx and reopen it until I get the response after
removing. I
Hello, my name is Tabaré and I have the following problem:
I´m using lyx 1.6.2 with windows vista for my project in the university of
Uruguay and I´m doing this in spanish. The problem is that I´m using book koma
script and in lyx I can see all the document ok but when I convert to pdf the
TeXnicCenter let's you browse through the errors and puts you to the right
place, which is very very helpfull.
LyX does this as well. What do you miss? More longer excerpts from the error
messages?
Jürgen
Is there a way to export only the text,not the pictures...?
No(t yet), but we have a feature request for this:
http://www.lyx.org/trac/ticket/3890
Jürgen
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
Give it some hours.
It's there now.
Jürgen
On 2009-06-05, Jürgen Spitzmüller wrote:
TeXnicCenter let's you browse through the errors and puts you to the right
place, which is very very helpfull.
LyX does this as well. What do you miss?
In many cases LyX is not able to find the true location of the
offending code (e.g. if inside a
Hello Uwe,
thank you. I didn´t know that there is a template – this helps a lot.
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no "texmf" in /usr/share/… Instead I found texmf in
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script UserGuide,
which I searched out of Lyx and in my \usr-folder also. (I use OSX and
do have no "texmf" in /usr/share/… Instead I found texmf in
/usr/local/texlive/2008, but in the doc-folder there is not latex-folder)
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I do not find the koma-script
UserGuide, which I searched out of Lyx and in my \usr-folder also.
There it is, thank you!
Best regards*
Jessika
Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
If you use TeXLive it is probably in:
/usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
/Anders
On 4 jun 2009, at 12.49, Uwe Stöhr wrote:
jezZiFeR schrieb:
But I still do have problems. I
christiaan pauw wrote:
Hi everybody
dvips knows 68 standard colours (see then at h t t p ://
en.wikibooks.org/wiki/LaTeX/Colors#The_68_standard_colors_known_to_dvips )
that have names. Some of them are quite beautiful. How can I use these named
colours is Lyx - for example to define text colours
On Thu, Jun 4, 2009 at 7:12 AM, jezZiFeR wrote:
> There it is, thank you!
>
> Best regards*
> Jessika
>
>
> Am 04.06.2009 um 12:57 schrieb Anders Ekberg:
>
>> If you use TeXLive it is probably in:
>> /usr/local/texlive/2008/texmf-dist/doc/latex/koma-script/
>>
>> /Anders
Hello,
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don
´t know where to specify letter head and foot definitions.
Additionally I tried to enter the bank-account in the template, where
it´s also not
Dear Gurus for lyx/latex,
I am trying to trace a citation error in my document (koma, book, 2 column,
debian). I divided the document in a master and several subdocuments.
I am getting in /tmp/lyx_tmpdir.TJ4198/lyx_tmpbuf directories for the master
and the subdocuments.
Could somebody explain
How about Xcolor and:
xcolor=dvipsnames
Uwe Stöhr wrote:
Asm_gmail schrieb:
Thanks Uwe for your patience to help me.
Well, I don't understand why you think that you have a problem. You want
a Type1 font and get it so it should be perfect for you.
Also, I can define these in:
Lyx:reference -> Output -> Latex -> tex encoding:
Public release of LyX version 1.6.3
===
We are pleased to announce the release of LyX 1.6.3. This is the third
maintenance release in the 1.6.x series. Besides the usual improvements
of stability, the highlights of this release are:
* tex2lyx is now able to read
Marcelo Reis wrote:
Manveru wrote:
2009/6/3 Marcelo Reis :
Guys,
Can please someone help me on how to reproduce the page border of the
attached PDF File?
(I created it using MS Word)
I know about FancyBox, but I was not able to define the border the
way I
want.
jezZiFeR schrieb:
sorry, I still don´t understand and don´t know, how I get the bank
account printed, when using Lyx with koma-letter2-class, because I don´t
know where to specify letter head and foot definitions.
But this is described with all details and many examples in the koma-script
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I get a
James C. Sutherland wrote:
It appears that
\usepackage{color}
is automatically placed in the preamble when a program listing with
coloring options is used. However, what if I want
\usepackage[usenames]{color}
instead? Is there a way to do this? If I put this directly in the
preamble then I
Hello LyXers,
the alternative Windows installer for LyX 1.6.3 is now available.
This installer comes again with an update installer to update existing LyX
1.6.2 installation to LyX
1.6.3. NOTE: To be able to use this installer version, LyX 1.6.2 must have been
installed with the
alternative
Hi Friends
I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
the rigth) corner on a page,
and below of the figure i want to write a title. Do you knonw how to do this
in Lyx ?
Do you know how to set the offset between the figure and the title?
I have set books (more font
Replying to my own question:
On 2009-06-03 22:40, "Gregory Jefferis" wrote:
> I want to do a respectable export of to something that Word can open for final
> submission to a journal. My document has bibtex references and multiple
> figures (present as floats from which I
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
WAS
On Thu, 2009-06-04 at 21:34 +0200, Uwe Stöhr wrote:
> Hello LyXers,
>
> the
Waluyo Adi Siswanto schrieb:
Where is the alternative Windows Installer ?
I could not find here
ftp://ftp.lyx.org/pub/lyx/bin/1.6.3/
The link for Windows binaries http://www.lyx.org/Download
could not find the AltInstaller either.
Give it some hours. But I also wrote:
The installer for
Marcelo Reis writes:
> > SorryHere is the link to the image file (converted from a DOC file):
> >
> > http://img23.imageshack.us/img23/1791/bordern.png
> >
> >
> Hey Guys, No ideas?!?!
Put the following lines in the preamble and adjust as needed.
\usepackage{eso-pic}
Installed Lyx version 1.6.2 and CocoAspell version 2.0.4 on Mac
version 10.5.7
When spell checking a document in Lyx I couldn't "add" words to the
dictionary.
After some web searching I discovered a fix is to comment the line
"home-dir $HOME/Library/Preferences/aspell" in file
Adrian Diaz writes:
> I want to put a figure (.jpg, eps, etc) at the top and on the left (or on
> the rigth) corner on a page,
> and below of the figure i want to write a title. Do you knonw how to do this
> in Lyx ?
> Do you know how to set the offset between the figure and the
Dear Gurus,
sometimes even in Lyx you do something wrong and you get an error message. Most
of the time they are not very usefull - they simply indicate that something went
wrong with a short excerpt of what caused the trouble - the excerpt however is
not enough (for me at least) to find out what
Hi there,
me again - somehow related to my previous post but
this can be a separate question:
when I export to plain Latex (when Bug-hunting) the exportation
takes ages...okay I got a lot of high resolution PNGs in there -
so I put all pictures in Draft mode...alas, this did not help
and it
Wolfgang Engelmann writes:
[snip]
> The reason is, that I have difficulties to localize the citation error,
> because even after taking out the offending citation lyx is still complaining
> about it. I have to close lyx and reopen it until I get the response after
> removing. I
Hello, my name is Tabaré and I have the following problem:
I´m using lyx 1.6.2 with windows vista for my project in the university of
Uruguay and I´m doing this in spanish. The problem is that I´m using book koma
script and in lyx I can see all the document ok but when I convert to pdf the
> TeXnicCenter let's you browse through the errors and puts you to the right
> place, which is very very helpfull.
LyX does this as well. What do you miss? More longer excerpts from the error
messages?
Jürgen
> Is there a way to export only the text,not the pictures...?
No(t yet), but we have a feature request for this:
http://www.lyx.org/trac/ticket/3890
Jürgen
> > The link for Windows binaries http://www.lyx.org/Download
> > could not find the AltInstaller either.
>
> Give it some hours.
It's there now.
Jürgen
On 2009-06-05, Jürgen Spitzmüller wrote:
>> TeXnicCenter let's you browse through the errors and puts you to the right
>> place, which is very very helpfull.
> LyX does this as well. What do you miss?
In many cases LyX is not able to find the true location of the
offending code (e.g. if inside
93 matches
Mail list logo