Re: HILFE!!!
Am 16.08.2011 15:24, schrieb Andreas Langkamp: Liebes lyx-team! Hallo Andreas, also ich bin nicht vom »lyx-team«, sondern einfach nur jemand, der LyX für seine Texte benutzt. Du hast auf eine Mailingliste zu LyX gepostet, was an sich eine gute Idee ist. Nur ist die auf englisch, weil Leute aus allen möglichen Ländern hier ihre Probleme mit LyX hinsenden. Es wäre also ganz gut, wenn Du das ganze noch mal auf Englisch postest und dabei auch einen etwas aussagekräftigeren Betreff nimmst, als nur »HILFE!!!« (mit wievielen Ausrufungszeichen auch immer). Lies Dir dazu auch den entsprechenden Abschnitt aus den Netiketten zu der SuSE-Linux-Mailingliste durch: http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette#Betreffzeile_.28Subject.29 Das ganze Dokument ist an sich lesenswert und das was drinsteht, lässt sich durchaus auch auf diese (wie jede andere) Mailingliste übertragen. http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette Nun zur Sache: Ich find die idee von lyx phantastisch. Ich auch. :-) Teile, Inhaltsverzeichnis und Quellennachweise erscheinen auf englisch - obwohl in lyx als sprache deutsch gewählt ist. Du kannst sowohl unter Werkzeuge -- Einstellungen -- Spracheinstellungen als auch unter Dokument -- Einstellungen -- Sprache die Sprache einstellen. Während Du ersteres vermutlich so lassen kannst wie es ist, solltest Du bei *jedem* neuen Dokument letzteres überprüfen. Bei mir zum Beispiel muss ich *immer* von Englisch auf Deutsch umstellen. Dabei solltest Du dann auch den Stil der Anführungszeichen so ändern, dass Du entweder „“ oder »« bekommst. Das literaturverzeichnis zitiert nicht so wie ichs gern hätte..wie find ich die passenden stile?! würd gern im bosten stil zitieren also im text (autor, jahr) im anhang dann: Nachname [fett], Vorname [fett], Titel, Untertitel, Titelzusatz, Herausgeber [abgekürzt und in Klammern (Hrsg.)], Titel, Untertiel, Titelzusatz, ggf. Reihentitel [und zwar in dieser Form (= Reihentitel, Bd. ..)], Auflage [ab 2. Aufl.], Verlagsort Jahr, Seite ..-.. [Punkt] dabei sind untertitel und titelzusatz die bezeichnungen die citavi, ein literaturverwaltungsprogramm den einträgen gibt. habe einige stile probiert die in lyx auftauchen, die meisten funktionieren nicht, plain arbeitet mit [1] im text, das geht gar nicht, der chicago, oder chicagoa stil scheint zu gehen, aber da kürz er im Literaturverzeichnis die vornamen ab, also Nachname, V. also auch nicht zu gebrauchen. Das ist im Prinzip kein Problem von LyX sondern hat etwas mit LaTeX zu tun. Zunächst solltest Du aber in LyX unter Dokument -- Einstellungen -- Literaturverzeichnis Natbib und als Natbib-Stil Autor-Jahr einstellen. Dann brauchst Du (jetzt kommt der LaTeX-Teil) einen Deinen Bedürfnissen entsprechenden BibTeX-Stil. Das ist eine Datei mit der Endung .bst, die Du unterhalb Deines MiKTeX-Programmverzeichnisses unter /bibtex/bst/[weiteres Unterverzeichnis] findest. In LyX klickst Du unter Einfügen -- Liste / Inhaltsverzeichnis auf BibTeX-Literaturverzeichnis..., wodurch die Einfügung »BibTeX-erzeugtes Literaturverzeichnis« entsteht. Auf diesen grauen Kasten (Balken) klickst Du drauf. Du bekommst eine Dialogbox, in der Du unter »Datenbanken« eine oder mehrere bib-Dateien mit den von Dir benutzten Büchern, Zeitschriften-Artikeln usw. aussuchen [1] und unter »Stil« die bst-Datei mit dem von Dir bevorzugten BibTeX-Stil bestimmen kannst. MiKTeX bringt bereits eine Menge bst-Dateien mit, die Du am besten erst einmal alle ausprobierst. Wenn kein Stil das bietet, was Du willst, kannst Du nach einer entsprechenden bst-Datei googeln. Einige Stile, die die Zitierstile bekannter sozialwissenschaftlicher Fachzeitschriften widerspiegeln, findest Du hier: http://www.serenethinking.com/bibwiki/Main/StylesForBibTeX Die kannst Du auch einmal ausprobieren. Wenn Du gar nichts finden solltest, was Deinen Bedürfnissen entspricht, gibt es immer noch zwei Möglichkeiten: 1. Entweder Du sprichst mit deinem Professor / deiner Professorin darüber, ob es bei Deinem Institut bzw. Seminar einen BibTeX-Stil für alle Studentinnen und Studenten, die da eine Arbeit (Hausarbeit, Diplomarbeit, Dissertation oder was sonst) schreiben, gibt oder ob Du einen Stil benutzen kannst, der dem doch recht nahe kommt und für Dich verfügbar ist (beispielsweise den von Dir erwähnten Chicago-Stil). Das würde zumindest die Sensibilität an dem Institut bzw. Seminar dafür erhöhen, dass es Menschen gibt, die *nicht* Microsoft Word oder ähnliches benutzen. 2. Oder Du bastelst Dir selbst eine bst-Datei, die das tut, was Du willst. Das machst Du, indem Du eine Kommandozeile (Shell) öffnest und in dem Unterverzeichnis, in dem Du Deine bst-Datei haben möchtest, den Befehl latex makebst.tex eingibst. Du wirst dann durch eine ganze Reihe Fragen geführt, die Du nach bestem Wissen und Gewissen beantworten solltest. Die Fragen sind auf Englisch. Daher wäre im Zweifelsfall ein gutes Englisch-Lexikon
Re: HILFE!!!
Am 16.08.2011 15:24, schrieb Andreas Langkamp: Liebes lyx-team! Hallo Andreas, also ich bin nicht vom »lyx-team«, sondern einfach nur jemand, der LyX für seine Texte benutzt. Du hast auf eine Mailingliste zu LyX gepostet, was an sich eine gute Idee ist. Nur ist die auf englisch, weil Leute aus allen möglichen Ländern hier ihre Probleme mit LyX hinsenden. Es wäre also ganz gut, wenn Du das ganze noch mal auf Englisch postest und dabei auch einen etwas aussagekräftigeren Betreff nimmst, als nur »HILFE!!!« (mit wievielen Ausrufungszeichen auch immer). Lies Dir dazu auch den entsprechenden Abschnitt aus den Netiketten zu der SuSE-Linux-Mailingliste durch: http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette#Betreffzeile_.28Subject.29 Das ganze Dokument ist an sich lesenswert und das was drinsteht, lässt sich durchaus auch auf diese (wie jede andere) Mailingliste übertragen. http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette Nun zur Sache: Ich find die idee von lyx phantastisch. Ich auch. :-) Teile, Inhaltsverzeichnis und Quellennachweise erscheinen auf englisch - obwohl in lyx als sprache deutsch gewählt ist. Du kannst sowohl unter Werkzeuge -- Einstellungen -- Spracheinstellungen als auch unter Dokument -- Einstellungen -- Sprache die Sprache einstellen. Während Du ersteres vermutlich so lassen kannst wie es ist, solltest Du bei *jedem* neuen Dokument letzteres überprüfen. Bei mir zum Beispiel muss ich *immer* von Englisch auf Deutsch umstellen. Dabei solltest Du dann auch den Stil der Anführungszeichen so ändern, dass Du entweder „“ oder »« bekommst. Das literaturverzeichnis zitiert nicht so wie ichs gern hätte..wie find ich die passenden stile?! würd gern im bosten stil zitieren also im text (autor, jahr) im anhang dann: Nachname [fett], Vorname [fett], Titel, Untertitel, Titelzusatz, Herausgeber [abgekürzt und in Klammern (Hrsg.)], Titel, Untertiel, Titelzusatz, ggf. Reihentitel [und zwar in dieser Form (= Reihentitel, Bd. ..)], Auflage [ab 2. Aufl.], Verlagsort Jahr, Seite ..-.. [Punkt] dabei sind untertitel und titelzusatz die bezeichnungen die citavi, ein literaturverwaltungsprogramm den einträgen gibt. habe einige stile probiert die in lyx auftauchen, die meisten funktionieren nicht, plain arbeitet mit [1] im text, das geht gar nicht, der chicago, oder chicagoa stil scheint zu gehen, aber da kürz er im Literaturverzeichnis die vornamen ab, also Nachname, V. also auch nicht zu gebrauchen. Das ist im Prinzip kein Problem von LyX sondern hat etwas mit LaTeX zu tun. Zunächst solltest Du aber in LyX unter Dokument -- Einstellungen -- Literaturverzeichnis Natbib und als Natbib-Stil Autor-Jahr einstellen. Dann brauchst Du (jetzt kommt der LaTeX-Teil) einen Deinen Bedürfnissen entsprechenden BibTeX-Stil. Das ist eine Datei mit der Endung .bst, die Du unterhalb Deines MiKTeX-Programmverzeichnisses unter /bibtex/bst/[weiteres Unterverzeichnis] findest. In LyX klickst Du unter Einfügen -- Liste / Inhaltsverzeichnis auf BibTeX-Literaturverzeichnis..., wodurch die Einfügung »BibTeX-erzeugtes Literaturverzeichnis« entsteht. Auf diesen grauen Kasten (Balken) klickst Du drauf. Du bekommst eine Dialogbox, in der Du unter »Datenbanken« eine oder mehrere bib-Dateien mit den von Dir benutzten Büchern, Zeitschriften-Artikeln usw. aussuchen [1] und unter »Stil« die bst-Datei mit dem von Dir bevorzugten BibTeX-Stil bestimmen kannst. MiKTeX bringt bereits eine Menge bst-Dateien mit, die Du am besten erst einmal alle ausprobierst. Wenn kein Stil das bietet, was Du willst, kannst Du nach einer entsprechenden bst-Datei googeln. Einige Stile, die die Zitierstile bekannter sozialwissenschaftlicher Fachzeitschriften widerspiegeln, findest Du hier: http://www.serenethinking.com/bibwiki/Main/StylesForBibTeX Die kannst Du auch einmal ausprobieren. Wenn Du gar nichts finden solltest, was Deinen Bedürfnissen entspricht, gibt es immer noch zwei Möglichkeiten: 1. Entweder Du sprichst mit deinem Professor / deiner Professorin darüber, ob es bei Deinem Institut bzw. Seminar einen BibTeX-Stil für alle Studentinnen und Studenten, die da eine Arbeit (Hausarbeit, Diplomarbeit, Dissertation oder was sonst) schreiben, gibt oder ob Du einen Stil benutzen kannst, der dem doch recht nahe kommt und für Dich verfügbar ist (beispielsweise den von Dir erwähnten Chicago-Stil). Das würde zumindest die Sensibilität an dem Institut bzw. Seminar dafür erhöhen, dass es Menschen gibt, die *nicht* Microsoft Word oder ähnliches benutzen. 2. Oder Du bastelst Dir selbst eine bst-Datei, die das tut, was Du willst. Das machst Du, indem Du eine Kommandozeile (Shell) öffnest und in dem Unterverzeichnis, in dem Du Deine bst-Datei haben möchtest, den Befehl latex makebst.tex eingibst. Du wirst dann durch eine ganze Reihe Fragen geführt, die Du nach bestem Wissen und Gewissen beantworten solltest. Die Fragen sind auf Englisch. Daher wäre im Zweifelsfall ein gutes Englisch-Lexikon
Re: HILFE!!!
Am 16.08.2011 15:24, schrieb Andreas Langkamp: Liebes lyx-team! Hallo Andreas, also ich bin nicht vom »lyx-team«, sondern einfach nur jemand, der LyX für seine Texte benutzt. Du hast auf eine Mailingliste zu LyX gepostet, was an sich eine gute Idee ist. Nur ist die auf englisch, weil Leute aus allen möglichen Ländern hier ihre Probleme mit LyX hinsenden. Es wäre also ganz gut, wenn Du das ganze noch mal auf Englisch postest und dabei auch einen etwas aussagekräftigeren Betreff nimmst, als nur »HILFE!!!« (mit wievielen Ausrufungszeichen auch immer). Lies Dir dazu auch den entsprechenden Abschnitt aus den Netiketten zu der SuSE-Linux-Mailingliste durch: http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette#Betreffzeile_.28Subject.29 Das ganze Dokument ist an sich lesenswert und das was drinsteht, lässt sich durchaus auch auf diese (wie jede andere) Mailingliste übertragen. http://de.opensuse.org/OpenSUSE_Mailinglisten-Netiquette Nun zur Sache: Ich find die idee von lyx phantastisch. Ich auch. :-) Teile, Inhaltsverzeichnis und Quellennachweise erscheinen auf englisch - obwohl in lyx als sprache deutsch gewählt ist. Du kannst sowohl unter Werkzeuge --> Einstellungen --> Spracheinstellungen als auch unter Dokument --> Einstellungen --> Sprache die Sprache einstellen. Während Du ersteres vermutlich so lassen kannst wie es ist, solltest Du bei *jedem* neuen Dokument letzteres überprüfen. Bei mir zum Beispiel muss ich *immer* von Englisch auf Deutsch umstellen. Dabei solltest Du dann auch den Stil der Anführungszeichen so ändern, dass Du entweder „“ oder »« bekommst. Das literaturverzeichnis zitiert nicht so wie ichs gern hätte..wie find ich die passenden stile?! würd gern im bosten stil zitieren also im text (autor, jahr) im anhang dann: Nachname [fett], Vorname [fett], Titel, Untertitel, Titelzusatz, Herausgeber [abgekürzt und in Klammern "(Hrsg.)"], Titel, Untertiel, Titelzusatz, ggf. Reihentitel [und zwar in dieser Form "(= Reihentitel, Bd. ..)"], Auflage [ab 2. Aufl.], Verlagsort Jahr, Seite ..-.. [Punkt] dabei sind untertitel und titelzusatz die bezeichnungen die citavi, ein literaturverwaltungsprogramm den einträgen gibt. habe einige stile probiert die in lyx auftauchen, die meisten funktionieren nicht, plain arbeitet mit [1] im text, das geht gar nicht, der chicago, oder chicagoa stil scheint zu gehen, aber da kürz er im Literaturverzeichnis die vornamen ab, also Nachname, V. also auch nicht zu gebrauchen. Das ist im Prinzip kein Problem von LyX sondern hat etwas mit LaTeX zu tun. Zunächst solltest Du aber in LyX unter Dokument --> Einstellungen --> Literaturverzeichnis Natbib und als Natbib-Stil Autor-Jahr einstellen. Dann brauchst Du (jetzt kommt der LaTeX-Teil) einen Deinen Bedürfnissen entsprechenden BibTeX-Stil. Das ist eine Datei mit der Endung .bst, die Du unterhalb Deines MiKTeX-Programmverzeichnisses unter /bibtex/bst/[weiteres Unterverzeichnis] findest. In LyX klickst Du unter Einfügen --> Liste / Inhaltsverzeichnis auf BibTeX-Literaturverzeichnis..., wodurch die Einfügung »BibTeX-erzeugtes Literaturverzeichnis« entsteht. Auf diesen grauen Kasten (Balken) klickst Du drauf. Du bekommst eine Dialogbox, in der Du unter »Datenbanken« eine oder mehrere bib-Dateien mit den von Dir benutzten Büchern, Zeitschriften-Artikeln usw. aussuchen [1] und unter »Stil« die bst-Datei mit dem von Dir bevorzugten BibTeX-Stil bestimmen kannst. MiKTeX bringt bereits eine Menge bst-Dateien mit, die Du am besten erst einmal alle ausprobierst. Wenn kein Stil das bietet, was Du willst, kannst Du nach einer entsprechenden bst-Datei googeln. Einige Stile, die die Zitierstile bekannter sozialwissenschaftlicher Fachzeitschriften widerspiegeln, findest Du hier: http://www.serenethinking.com/bibwiki/Main/StylesForBibTeX Die kannst Du auch einmal ausprobieren. Wenn Du gar nichts finden solltest, was Deinen Bedürfnissen entspricht, gibt es immer noch zwei Möglichkeiten: 1. Entweder Du sprichst mit deinem Professor / deiner Professorin darüber, ob es bei Deinem Institut bzw. Seminar einen BibTeX-Stil für alle Studentinnen und Studenten, die da eine Arbeit (Hausarbeit, Diplomarbeit, Dissertation oder was sonst) schreiben, gibt oder ob Du einen Stil benutzen kannst, der dem doch recht nahe kommt und für Dich verfügbar ist (beispielsweise den von Dir erwähnten Chicago-Stil). Das würde zumindest die Sensibilität an dem Institut bzw. Seminar dafür erhöhen, dass es Menschen gibt, die *nicht* Microsoft Word oder ähnliches benutzen. 2. Oder Du bastelst Dir selbst eine bst-Datei, die das tut, was Du willst. Das machst Du, indem Du eine Kommandozeile (Shell) öffnest und in dem Unterverzeichnis, in dem Du Deine bst-Datei haben möchtest, den Befehl latex makebst.tex eingibst. Du wirst dann durch eine ganze Reihe Fragen geführt, die Du nach bestem Wissen und Gewissen beantworten solltest. Die Fragen sind auf Englisch. Daher wäre im Zweifelsfall ein gutes
Re: Hilfe bei Dokumentengliederung
[EMAIL PROTECTED] wrote: Hallo, Hi, this is an English speaking list, so I'll answer in English. ich möchte Lyx für meine Diplomarbeit benutzen und habe mich auch schon ein bißchen eingelesen. Als Dokumentenklasse nehme ich aus verschiedenen Gründen entweder article (koma-skript) oder article (paper). I'd recommend KOMA, it is very flexible. Aber wie schaffe ich es, einen unterunterunterabschnitt (und tiefergehende Gliederungspunkte) einzubauen? Bei book habe ich schon gesehen, dass es diese Gliederungstiefe gibt. Numbering depths of more than 3 levels are almost always a bad idea. I hope you know what you are doing. If so, have a look at Dokument-Einstellungen-Nummerierungen und Inhaltsverzeichnis. Put the slider for numbering (and, if desired, for TOC) to the very right, so that numbering for Paragraph and Subparagraph is on. Now you can use Paragraph and Subparagraph for your purpose. You need to redefine the two environments to get a line break after the heading. For KOMA, put this into the preamble: [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] .2ex}% {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} Hope this helps, Jürgen Vielen Dank und viele Grüße! Eva
Re: Hilfe bei Dokumentengliederung
[EMAIL PROTECTED] wrote: Hallo, Hi, this is an English speaking list, so I'll answer in English. ich möchte Lyx für meine Diplomarbeit benutzen und habe mich auch schon ein bißchen eingelesen. Als Dokumentenklasse nehme ich aus verschiedenen Gründen entweder article (koma-skript) oder article (paper). I'd recommend KOMA, it is very flexible. Aber wie schaffe ich es, einen unterunterunterabschnitt (und tiefergehende Gliederungspunkte) einzubauen? Bei book habe ich schon gesehen, dass es diese Gliederungstiefe gibt. Numbering depths of more than 3 levels are almost always a bad idea. I hope you know what you are doing. If so, have a look at Dokument-Einstellungen-Nummerierungen und Inhaltsverzeichnis. Put the slider for numbering (and, if desired, for TOC) to the very right, so that numbering for Paragraph and Subparagraph is on. Now you can use Paragraph and Subparagraph for your purpose. You need to redefine the two environments to get a line break after the heading. For KOMA, put this into the preamble: [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] .2ex}% {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} Hope this helps, Jürgen Vielen Dank und viele Grüße! Eva
Re: Hilfe bei Dokumentengliederung
[EMAIL PROTECTED] wrote: > Hallo, Hi, this is an English speaking list, so I'll answer in English. > ich möchte Lyx für meine Diplomarbeit benutzen und habe mich auch schon ein > bißchen eingelesen. Als Dokumentenklasse nehme ich aus verschiedenen > Gründen entweder article (koma-skript) oder article (paper). I'd recommend KOMA, it is very flexible. > Aber wie > schaffe ich es, einen unterunterunterabschnitt (und tiefergehende > Gliederungspunkte) einzubauen? Bei book habe ich schon gesehen, dass es > diese Gliederungstiefe gibt. Numbering depths of more than 3 levels are almost always a bad idea. I hope you know what you are doing. If so, have a look at Dokument->Einstellungen->Nummerierungen und Inhaltsverzeichnis. Put the slider for numbering (and, if desired, for TOC) to the very right, so that numbering for Paragraph and Subparagraph is on. Now you can use Paragraph and Subparagraph for your purpose. You need to redefine the two environments to get a line break after the heading. For KOMA, put this into the preamble: [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} [EMAIL PROTECTED]@}% {-3.25ex [EMAIL PROTECTED] [EMAIL PROTECTED] .2ex}% {1.5ex [EMAIL PROTECTED] .2ex}% {\setlength{\parfillskip}{\z@ [EMAIL PROTECTED] 1fil}% [EMAIL PROTECTED]@afterheading}} Hope this helps, Jürgen > Vielen Dank und viele Grüße! > Eva
Re: Hilfe-Datei
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote: Enrico Forestieri writes: Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. I don't think so. See the attached. -- Enrico #LyX 1.4.2 created this file. For more info see http://www.lyx.org/ \lyxformat 245 \begin_document \begin_header \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize default \use_geometry false \use_amsmath 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \end_header \begin_body \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash renewcommand \backslash footnoterule{} \end_layout \end_inset \begin_inset Box Frameless position c hor_pos c has_inner_box 1 inner_pos c use_parbox 0 width 100col% special none height 1in height_special totalheight status open \begin_layout Caption A \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset table \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset caption. \begin_inset Foot status collapsed \begin_layout Standard a note to the caption \end_layout \end_inset \end_layout \begin_layout Standard \align center \begin_inset Tabular lyxtabular version=3 rows=3 columns=4 features column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true rightline=true width=20col% row topline=true bottomline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard one \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard two \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard three \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard four \end_layout \end_inset /cell /row row topline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard www \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard xxx \begin_inset Foot status collapsed \begin_layout Standard a second note \end_layout \end_inset \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard yyy \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard zzz \end_layout \end_inset /cell /row row topline=true bottomline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard abc \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard def \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard ghi \begin_inset Foot status collapsed \begin_layout Standard and a third one \end_layout \end_inset \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard jkl \end_layout \end_inset /cell /row /lyxtabular \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{-1}% \end_layout \begin_layout Standard \backslash footnotetext{this one goes to the page bottom} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{1}% \end_layout \begin_layout Standard
Re: Hilfe-Datei
Enrico Forestieri writes: But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. I don't think so. See the attached. Of course everything is possible with (La)TeX and some tricks. I knew the possibility with the minipage, but the \footnotemark option was new for me. Thanks for your example file. regards Uwe
Re: Hilfe-Datei
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote: Enrico Forestieri writes: Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. I don't think so. See the attached. -- Enrico #LyX 1.4.2 created this file. For more info see http://www.lyx.org/ \lyxformat 245 \begin_document \begin_header \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize default \use_geometry false \use_amsmath 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \end_header \begin_body \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash renewcommand \backslash footnoterule{} \end_layout \end_inset \begin_inset Box Frameless position c hor_pos c has_inner_box 1 inner_pos c use_parbox 0 width 100col% special none height 1in height_special totalheight status open \begin_layout Caption A \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset table \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset caption. \begin_inset Foot status collapsed \begin_layout Standard a note to the caption \end_layout \end_inset \end_layout \begin_layout Standard \align center \begin_inset Tabular lyxtabular version=3 rows=3 columns=4 features column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true width=20col% column alignment=center valignment=top leftline=true rightline=true width=20col% row topline=true bottomline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard one \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard two \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard three \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard four \end_layout \end_inset /cell /row row topline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard www \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard xxx \begin_inset Foot status collapsed \begin_layout Standard a second note \end_layout \end_inset \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard yyy \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard zzz \end_layout \end_inset /cell /row row topline=true bottomline=true cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard abc \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard def \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true usebox=none \begin_inset Text \begin_layout Standard ghi \begin_inset Foot status collapsed \begin_layout Standard and a third one \end_layout \end_inset \end_layout \end_inset /cell cell alignment=center valignment=top topline=true leftline=true rightline=true usebox=none \begin_inset Text \begin_layout Standard jkl \end_layout \end_inset /cell /row /lyxtabular \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{-1}% \end_layout \begin_layout Standard \backslash footnotetext{this one goes to the page bottom} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{1}% \end_layout \begin_layout Standard
Re: Hilfe-Datei
Enrico Forestieri writes: But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. I don't think so. See the attached. Of course everything is possible with (La)TeX and some tricks. I knew the possibility with the minipage, but the \footnotemark option was new for me. Thanks for your example file. regards Uwe
Re: Hilfe-Datei
On Wed, Aug 09, 2006 at 09:40:30PM +0200, Uwe Stöhr wrote: > Enrico Forestieri writes: > > >> > Translation: Is it possible to add a footnote to the caption of a > >> > floating table/picture? > >> > >> Not really. This is a restriction of LaTeX. > > > > It is possible. You need to put the table/picture in a minipage inside the > > float. > > But this doesn't work for captions and this was the question. LyX 1.4.2 > prevents the insertion of footnotes to captions. I don't think so. See the attached. -- Enrico #LyX 1.4.2 created this file. For more info see http://www.lyx.org/ \lyxformat 245 \begin_document \begin_header \textclass article \language english \inputencoding auto \fontscheme default \graphics default \paperfontsize default \papersize default \use_geometry false \use_amsmath 1 \cite_engine basic \use_bibtopic false \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \papercolumns 1 \papersides 1 \paperpagestyle default \tracking_changes false \output_changes false \end_header \begin_body \begin_layout Standard \begin_inset Float table placement h wide false sideways false status open \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash renewcommand \backslash footnoterule{} \end_layout \end_inset \begin_inset Box Frameless position "c" hor_pos "c" has_inner_box 1 inner_pos "c" use_parbox 0 width "100col%" special "none" height "1in" height_special "totalheight" status open \begin_layout Caption A \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset table \begin_inset ERT status collapsed \begin_layout Standard \backslash protect \backslash footnotemark \backslash \end_layout \end_inset caption. \begin_inset Foot status collapsed \begin_layout Standard a note to the caption \end_layout \end_inset \end_layout \begin_layout Standard \align center \begin_inset Tabular \begin_inset Text \begin_layout Standard one \end_layout \end_inset \begin_inset Text \begin_layout Standard two \end_layout \end_inset \begin_inset Text \begin_layout Standard three \end_layout \end_inset \begin_inset Text \begin_layout Standard four \end_layout \end_inset \begin_inset Text \begin_layout Standard www \end_layout \end_inset \begin_inset Text \begin_layout Standard xxx \begin_inset Foot status collapsed \begin_layout Standard a second note \end_layout \end_inset \end_layout \end_inset \begin_inset Text \begin_layout Standard yyy \end_layout \end_inset \begin_inset Text \begin_layout Standard zzz \end_layout \end_inset \begin_inset Text \begin_layout Standard abc \end_layout \end_inset \begin_inset Text \begin_layout Standard def \end_layout \end_inset \begin_inset Text \begin_layout Standard ghi \begin_inset Foot status collapsed \begin_layout Standard and a third one \end_layout \end_inset \end_layout \end_inset \begin_inset Text \begin_layout Standard jkl \end_layout \end_inset \end_inset \end_layout \end_inset \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{-1}% \end_layout \begin_layout Standard \backslash footnotetext{this one goes to the page bottom} \end_layout \end_inset \end_layout \begin_layout Standard \begin_inset ERT status open \begin_layout Standard \backslash addtocounter{footnote}{1}% \end_layout \begin_layout Standard \backslash footnotetext{as well as this one} \end_layout \end_inset \end_layout \end_body \end_document
Re: Hilfe-Datei
Enrico Forestieri writes: But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. I don't think so. See the attached. Of course everything is possible with (La)TeX and some tricks. I knew the possibility with the minipage, but the \footnotemark option was new for me. Thanks for your example file. regards Uwe
Re: Hilfe-Datei
Enrico Forestieri writes: Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. regards Uwe
Re: Hilfe-Datei
Enrico Forestieri writes: Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. regards Uwe
Re: Hilfe-Datei
Enrico Forestieri writes: > Translation: Is it possible to add a footnote to the caption of a > floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. But this doesn't work for captions and this was the question. LyX 1.4.2 prevents the insertion of footnotes to captions. regards Uwe
Re: Hilfe-Datei
Am Dienstag, 8. August 2006 14:47 schrieb [EMAIL PROTECTED]: Hallo, Hi, please use English the next time. Wir versuchen gerade, LyX in der Firma ein wenig zu integrieren und haben dazu eine eigene Dokumentenklasse und Vorlage, sowie eine Hilfedatei zur Anwendung erstellt. Welche config-Datei kann man so verändern, dass die Hilfedate im Menü unter Hilfe ausgewählt werden kann? (Es wird die LyX-Version 1.4.2 unter Windows verwendet) Translation: They are trying to make use of LyX in their company (Hallesche is a German insurance company). They've create an own document class and a template. Moreover, they've created a new help file and now they want to know how to integrate it into the Help menu. The following works with LyX 1.3.5 on Linux: - Copy the new help file, let's say it's called Hallesche.lyx, into the folder containing all the other help files. On my computer that's /usr/share/lyx/doc. - Find the file default.ui (here it's in /usr/share/lyx/ui) and add the following line in the Help Menu section Item Hilfe|H help-open Hallesche It's important that the name of the help file and the parameter of the help-open command coincide. Und dann hätte ich noch 2 kleine Fragen, die beim Studieren des Handbuchs noch offengeblieben sind: Then they have two questions: 1. Kann man die Beschriftung einer Tabelle/Abbildung in einer Gleitumgebung nicht mit einer Fußnote versehen? Translation: Is it possible to add a footnote to the caption of a floating table/picture? 2. Wie ist es möglich, die Tabellenbeschriftung linksbündig zu setzen und nicht wie vorgegeben zentriert...? Translation: Is it possible to left-flush (instead of centering) the caption of a table? Regards, Ingo pgpTA7VhOjGLv.pgp Description: PGP signature
Re: Hilfe-Datei
[EMAIL PROTECTED] schrieb: Translation: They are trying to make use of LyX in their company (Hallesche is a German insurance company). They've create an own document class and a template. Moreover, they've created a new help file and now they want to know how to integrate it into the Help menu. Ingo resonsed: The following works with LyX 1.3.5 on Linux: - Copy the new help file, let's say it's called Hallesche.lyx, into the folder containing all the other help files. On my computer that's /usr/share/lyx/doc. - Find the file default.ui (here it's in /usr/share/lyx/ui) and add the following line in the Help Menu section Item Hilfe|H help-open Hallesche It's important that the name of the help file and the parameter of the help-open command coincide. This also work under Windows. The Linux folder /usr/share/lyx/doc is the win folder ~\Resources\doc, the folder /usr/share/lyx/ui is equal to ~\Resources\ui Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. Translation: Is it possible to left-flush (instead of centering) the caption of a table? Use the LaTeX-package caption. To achieve the left alignment add e.g. this line to your document preamble: \usepackage[labelfont=bf,format=hang,justification=raggedright]{caption} For more info, have a look at: http://www.tug.org/tetex/tetex-texmfdist/doc/latex/caption/anleitung.dvi regards Uwe
Re: Hilfe-Datei
Uwe Stöhr [EMAIL PROTECTED] writes: [...] Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. The footnote appears at the bottom of the table/picture, though. However, using \foonotetext and \footnotemark it can be placed at the bottom of the page, if so desired. -- Enrico
Re: Hilfe-Datei
Am Dienstag, 8. August 2006 14:47 schrieb [EMAIL PROTECTED]: Hallo, Hi, please use English the next time. Wir versuchen gerade, LyX in der Firma ein wenig zu integrieren und haben dazu eine eigene Dokumentenklasse und Vorlage, sowie eine Hilfedatei zur Anwendung erstellt. Welche config-Datei kann man so verändern, dass die Hilfedate im Menü unter Hilfe ausgewählt werden kann? (Es wird die LyX-Version 1.4.2 unter Windows verwendet) Translation: They are trying to make use of LyX in their company (Hallesche is a German insurance company). They've create an own document class and a template. Moreover, they've created a new help file and now they want to know how to integrate it into the Help menu. The following works with LyX 1.3.5 on Linux: - Copy the new help file, let's say it's called Hallesche.lyx, into the folder containing all the other help files. On my computer that's /usr/share/lyx/doc. - Find the file default.ui (here it's in /usr/share/lyx/ui) and add the following line in the Help Menu section Item Hilfe|H help-open Hallesche It's important that the name of the help file and the parameter of the help-open command coincide. Und dann hätte ich noch 2 kleine Fragen, die beim Studieren des Handbuchs noch offengeblieben sind: Then they have two questions: 1. Kann man die Beschriftung einer Tabelle/Abbildung in einer Gleitumgebung nicht mit einer Fußnote versehen? Translation: Is it possible to add a footnote to the caption of a floating table/picture? 2. Wie ist es möglich, die Tabellenbeschriftung linksbündig zu setzen und nicht wie vorgegeben zentriert...? Translation: Is it possible to left-flush (instead of centering) the caption of a table? Regards, Ingo pgpTA7VhOjGLv.pgp Description: PGP signature
Re: Hilfe-Datei
[EMAIL PROTECTED] schrieb: Translation: They are trying to make use of LyX in their company (Hallesche is a German insurance company). They've create an own document class and a template. Moreover, they've created a new help file and now they want to know how to integrate it into the Help menu. Ingo resonsed: The following works with LyX 1.3.5 on Linux: - Copy the new help file, let's say it's called Hallesche.lyx, into the folder containing all the other help files. On my computer that's /usr/share/lyx/doc. - Find the file default.ui (here it's in /usr/share/lyx/ui) and add the following line in the Help Menu section Item Hilfe|H help-open Hallesche It's important that the name of the help file and the parameter of the help-open command coincide. This also work under Windows. The Linux folder /usr/share/lyx/doc is the win folder ~\Resources\doc, the folder /usr/share/lyx/ui is equal to ~\Resources\ui Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. Translation: Is it possible to left-flush (instead of centering) the caption of a table? Use the LaTeX-package caption. To achieve the left alignment add e.g. this line to your document preamble: \usepackage[labelfont=bf,format=hang,justification=raggedright]{caption} For more info, have a look at: http://www.tug.org/tetex/tetex-texmfdist/doc/latex/caption/anleitung.dvi regards Uwe
Re: Hilfe-Datei
Uwe Stöhr [EMAIL PROTECTED] writes: [...] Translation: Is it possible to add a footnote to the caption of a floating table/picture? Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. The footnote appears at the bottom of the table/picture, though. However, using \foonotetext and \footnotemark it can be placed at the bottom of the page, if so desired. -- Enrico
Re: Hilfe-Datei
Am Dienstag, 8. August 2006 14:47 schrieb [EMAIL PROTECTED]: > Hallo, Hi, please use English the next time. > Wir versuchen gerade, LyX in der Firma ein wenig zu integrieren und > haben dazu eine eigene Dokumentenklasse und Vorlage, sowie eine > Hilfedatei zur Anwendung erstellt. Welche config-Datei kann man so > verändern, dass die Hilfedate im Menü unter "Hilfe" ausgewählt werden > kann? (Es wird die LyX-Version 1.4.2 unter Windows verwendet) Translation: They are trying to make use of LyX in their company (Hallesche is a German insurance company). They've create an own document class and a template. Moreover, they've created a new help file and now they want to know how to integrate it into the Help menu. The following works with LyX 1.3.5 on Linux: - Copy the new help file, let's say it's called Hallesche.lyx, into the folder containing all the other help files. On my computer that's /usr/share/lyx/doc. - Find the file "default.ui" (here it's in /usr/share/lyx/ui) and add the following line in the Help Menu section Item "Hilfe|H" "help-open Hallesche" It's important that the name of the help file and the parameter of the help-open command coincide. > Und dann hätte ich noch 2 kleine Fragen, die beim Studieren des > Handbuchs noch offengeblieben sind: Then they have two questions: > 1. Kann man die Beschriftung einer Tabelle/Abbildung in einer > Gleitumgebung nicht mit einer Fußnote versehen? Translation: Is it possible to add a footnote to the caption of a floating table/picture? > 2. Wie ist es möglich, die Tabellenbeschriftung linksbündig zu > setzen und nicht wie vorgegeben zentriert...? Translation: Is it possible to left-flush (instead of centering) the caption of a table? Regards, Ingo pgpTA7VhOjGLv.pgp Description: PGP signature
Re: Hilfe-Datei
[EMAIL PROTECTED] schrieb: > Translation: They are trying to make use of LyX in their company > (Hallesche is a German insurance company). They've create an own > document class and a template. Moreover, they've created a new help > file and now they want to know how to integrate it into the Help menu. Ingo resonsed: > The following works with LyX 1.3.5 on Linux: > - Copy the new help file, let's say it's called Hallesche.lyx, into > the folder containing all the other help files. On my computer > that's /usr/share/lyx/doc. > - Find the file "default.ui" (here it's in /usr/share/lyx/ui) and add > the following line in the Help Menu section > Item "Hilfe|H" "help-open Hallesche" > It's important that the name of the help file and the parameter of the > help-open command coincide. This also work under Windows. The Linux folder /usr/share/lyx/doc is the win folder ~\Resources\doc, the folder /usr/share/lyx/ui is equal to ~\Resources\ui > Translation: Is it possible to add a footnote to the caption of a > floating table/picture? Not really. This is a restriction of LaTeX. > Translation: Is it possible to left-flush (instead of centering) the > caption of a table? Use the LaTeX-package "caption". To achieve the left alignment add e.g. this line to your document preamble: \usepackage[labelfont=bf,format=hang,justification=raggedright]{caption} For more info, have a look at: http://www.tug.org/tetex/tetex-texmfdist/doc/latex/caption/anleitung.dvi regards Uwe
Re: Hilfe-Datei
Uwe Stöhr <[EMAIL PROTECTED]> writes: [...] > > Translation: Is it possible to add a footnote to the caption of a > > floating table/picture? > > Not really. This is a restriction of LaTeX. It is possible. You need to put the table/picture in a minipage inside the float. The footnote appears at the bottom of the table/picture, though. However, using \foonotetext and \footnotemark it can be placed at the bottom of the page, if so desired. -- Enrico