[Machinekit] Stepper motor configuration

Dear all, Recently i am trying to use CRAMPS.ini(without cape just BBB) to drive step motor. My Motor model is: Moon's stepping motor Type 17HA6403-09N Driver is A4988 P8-13 and P8-14 are used as stepdir and step. First of all, I adjust the limit current to 0.43A according to

Re: [Machinekit] Stepper motor configuration

Dear Charles,Schooner, Bas de Bruijin, Due to time lag and working, sorry for late reply. could it be that instead of 4 rev/mm you have a reduction of 4 mm/rev ? > that would mean 100 full steps/mm and might make more sense. > First of all, I make mistake that is should be 4 rev/mm. So I

Re: [Machinekit] How to cross compile machinekit to run on the zedboard?

Hi Michael and Charles, Thanks for point out to refer this thread. Hi Liu Fei, Thanks for explain your project. It sounds quite similar as what I am trying to do. See( *https://groups.google.com/forum/?utm_source=digest_medium=email#!topic/machinekit/wqH_V52qdQY*

[Machinekit] How to start with DE0-Nano-SoC board?

Dear all, Recently I read * http://blog.machinekit.io/2016/04/altera-soc-running-machinekit-with.html* and i bought one DE0-Nano-Soc board. >From this post I follow this

Re: [Machinekit] How to start with DE0-Nano-SoC board?

Hi Charles, Thanks, I will review the github issue thread. -chengxi . On Sunday, 6 November 2016 21:07:43 UTC+8, Charles Steinkuehler wrote: > > On 11/6/2016 6:51 AM, euerka wrote: > > Hi, > > > > I was just a few days away. Thanks for your reply. > > I

[Machinekit] Re: Start with machinetalk and QtQuickVcp

inekit) and try a very simple demo application to verify that it > works: > https://github.com/machinekoder/anddemo > > The next step is to run the mkwrapper-sim demo: > https://github.com/machinekoder/mkwrapper-sim > > Then you can go ahead and try to the other Machinetalk

[Machinekit] Re: Start with machinetalk and QtQuickVcp

https://github.com/machinekoder/anddemo > > The next step is to run the mkwrapper-sim demo: > https://github.com/machinekoder/mkwrapper-sim > > Then you can go ahead and try to the other Machinetalk configurations. > > euerka writes: > > > Then I tried: > > >

Re: [Machinekit] How to start with DE0-Nano-SoC board?

, 31 October 2016 20:57:34 UTC+8, Charles Steinkuehler wrote: > > On 10/31/2016 7:43 AM, euerka wrote: > > Hi Charles, > > > > Just for update. I have run machinekit on DE0-Nano-SoC successful. > > It is the time to enter FPGA things, if I am not wrong, i have to bu

Re: [Machinekit] How to start with DE0-Nano-SoC board?

016 22:48:25 UTC+8, Charles Steinkuehler wrote: > > On 8/24/2016 9:32 AM, euerka wrote: > > Dear all, > > > > Recently I > > read_ > http://blog.machinekit.io/2016/04/altera-soc-running-machinekit-with.html_ > > < > http://blog.machinekit.io/2016/04/al

[Machinekit] Re: Introducing WebVCP

Hi Alex, Good job and Interesting. I will try it out soon. By the way, how about html5 ? -chengxi On Thursday, 27 October 2016 00:45:30 UTC+8, Alexander Rössler wrote: > > In the last few months I have continuously worked on learning myself > some basic web skills. Finally, I managed to create

Re: [Machinekit] error file not fount, building QtQuickVCP.pro

Hi Norbert, Please try to use command line to compile QtQuickVcp if you use linux. Since it happened to me also, and command line helps. -chengxi On Friday, 28 October 2016 23:09:50 UTC+8, Norbert Schechner wrote: > > Hallo Schooner, > > thanks for the answer. Documentation on github says: > >

Re: [Machinekit] Re: Start with machinetalk and QtQuickVcp

Thanks Charles, I will try it out and update you here. Best Regards! -chengxi On Wednesday, 12 October 2016 02:57:19 UTC+8, Charles Steinkuehler wrote: > > On 10/11/2016 1:51 PM, Charles Steinkuehler wrote: > > > > Start with the rundemo.py code. > > I forgot I also have a remote demo for my

[Machinekit] Re: Start with machinetalk and QtQuickVcp

Pin 'pid.1.maxerrorI' set to 1.0 > MendelMax.Remote.hal:418: setting parameter 'pid.1.bias' to '0.5' > MendelMax.Remote.hal:418: Pin 'pid.1.bias' set to 0.5 > MendelMax.Remote.hal:419: setting parameter 'pid.1.enable' to '1' > MendelMax.Remote.hal:419: Pin 'pid.1.enable' set to 1 > :

Re: [Machinekit] Re: Start with machinetalk and QtQuickVcp

Yeah, it was running in BBB side. Now I am trying to build QtQuickVcp in my computer side. On Sunday, 16 October 2016 20:45:18 UTC+8, Charles Steinkuehler wrote: > > On 10/15/2016 9:41 PM, euerka wrote: > > > > CRAMPS.hal:10: Program './setup.sh' finished > >

Re: [Machinekit] Add user kinematics module

nekit/blob/master/src/Makefile#L499 > https://github.com/machinekit/machinekit/blob/master/src/Makefile#L1568 > https://github.com/machinekit/machinekit/blob/master/src/Makefile#L1875 > > then rebuild and test. > > If that does not work would need to see the code > > reg

[Machinekit] How to configure Web UI?

Hi, Recently I am trying to communicate between Windows based PC and machinekit in BBB. I noticed that there is one folder WWW in machinekit, how can configure this web base UI, since I can't find configure files in configs/? Thanks! -chengxi -- website: http://www.machinekit.io blog: