Re: [Machinekit] Machinekit extruder problem
Charles are you there ? you did not give an answer for last questions.Will you help me about that ? 26 Şubat 2019 Salı 18:04:59 UTC+3 tarihinde Charles Steinkuehler yazdı: > > On 2/26/2019 7:41 AM, Ömür Ceran wrote: > > I will try temperature sensor to understand the problem. Thank you for > that. > > But ı dont understand 'conventional' means, are you trying to say that > problem is about Ngcwriter program output or cura? İf so, do you have any > suggestion about conversion(gcode to mcode)? > > By "conventional" I mean the extruder is considered another motion > axis which directly controls the extruder motor vs. velocity based > extrusion where the extruder is controlled based on the XY velocity > and a desired amount of material to extrude. > > You mentioned velocity based extrusion in your previous mail. If you > want to setup velocity based extrusion, my config files are not the > place to start. > > -- > Charles Steinkuehler > cha...@steinkuehler.net > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
I just want to make a 3d printer with BBB,for now ı can make it conventional way. However ı mentioned previous mails,when ı delete velocity extrusion enable code, machinekit gave error. Can you explain it why? Is it about Ngcwriter? Or which program should ı use? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
On 2/26/2019 7:41 AM, Ömür Ceran wrote: > I will try temperature sensor to understand the problem. Thank you for that. > But ı dont understand 'conventional' means, are you trying to say that > problem is about Ngcwriter program output or cura? İf so, do you have any > suggestion about conversion(gcode to mcode)? By "conventional" I mean the extruder is considered another motion axis which directly controls the extruder motor vs. velocity based extrusion where the extruder is controlled based on the XY velocity and a desired amount of material to extrude. You mentioned velocity based extrusion in your previous mail. If you want to setup velocity based extrusion, my config files are not the place to start. -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
I will try temperature sensor to understand the problem. Thank you for that. But ı dont understand 'conventional' means, are you trying to say that problem is about Ngcwriter program output or cura? İf so, do you have any suggestion about conversion(gcode to mcode)? Ömür ceran -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
On 2/26/2019 7:06 AM, Ömür Ceran wrote: > Actually ı am using cura with Ngcwriter extension.I sliced a stl file and > save it as a .ngc and upload in machinekit program.Machinekit shows the file > which ı uploaded but when ı run the program, it does not work. I should say > that, ı did not connect any sensor or motor yet. Can it be about temperature > sensor? That is definitely a possibility. > Also ı want to ask you, there is no code which is velocity extrusion enable > or how many extruder is connected(for definition) in your configuration. > Before adding them,machinekit gave a problem for that. Do ı need to add them? > I know that 'A' is used for extruder but ı used remap code(gcode to mcode). I do not currently have any machine configurations setup for velocity based extrusion, all my machines use "conventional" position commands for the extruder axis. -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
Actually ı am using cura with Ngcwriter extension.I sliced a stl file and save it as a .ngc and upload in machinekit program.Machinekit shows the file which ı uploaded but when ı run the program, it does not work. I should say that, ı did not connect any sensor or motor yet. Can it be about temperature sensor? Also ı want to ask you, there is no code which is velocity extrusion enable or how many extruder is connected(for definition) in your configuration. Before adding them,machinekit gave a problem for that. Do ı need to add them? I know that 'A' is used for extruder but ı used remap code(gcode to mcode). -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
Re: [Machinekit] Machinekit extruder problem
On 2/26/2019 12:46 AM, Ömür Ceran wrote: > Hi there, > I try to make a corexy printer but there are a few problem. > When ı upload a sketch and run machine, motor does not work as a 3d printer > but when ı upload normal cnc .ngc file, it is working. Also ı had another > problem about velocity extrusion enable. I use configuration which belongs to > charles stein corexy. Can you help me about that? How can ı configure it for > corexy and solve spindle to extruder? > https://github.com/cdsteinkuehler/machine-configs/tree/master/configs/CoreXZ To switch from CoreXZ to CoreXY, change the axes used by the CoreXY module: https://github.com/cdsteinkuehler/machine-configs/blob/master/configs/CoreXZ/CoreXZ.hal#L65-L76 I'm using axis.0 (X) and axis.2 (Z), you'll want axis.0 (X) and axis.1 (Y). You may also want to swap which control signals are fed to the motor drivers, eg: https://github.com/cdsteinkuehler/machine-configs/blob/master/configs/CoreXZ/CoreXZ.hal#L168-L173 You don't provide enough detail about your extruder issues to know what's going wrong, but Machinekit will expect extruder moves to be on the "A" axis, while typical slicing programs use the "E" axis. You can either get a slicer that outputs Machinekit/LinuxCNC/Mach style gcode, post-process the gcode file, or setup gcode remapping to handle the typical RepRap style gcode. -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
[Machinekit] Machinekit extruder problem
Hi there, I try to make a corexy printer but there are a few problem. When ı upload a sketch and run machine, motor does not work as a 3d printer but when ı upload normal cnc .ngc file, it is working. Also ı had another problem about velocity extrusion enable. I use configuration which belongs to charles stein corexy. Can you help me about that? How can ı configure it for corexy and solve spindle to extruder? https://github.com/cdsteinkuehler/machine-configs/tree/master/configs/CoreXZ Thank you Ömür Ceran -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.