Hi,
I am about to install my first module. I've been learning perl for the
past several years and am building a web site that needs
ImageMagick/PerlMagick.
First, how difficult is it to install these modules?
Second, are there any idiosyncrasies is installing these modules on
Panther?
Third, is
You'll have to help me a little here. Who is Sherm Pendley and what is
Fat Camel /Graphics Kit?
Thanks,
Mark
On Sep 22, 2004, at 9:22 AM, Bill Stephenson wrote:
I installed it (but have not used it) on Panther without any trouble
at all using Sherm Pendley's Fat Camel GraphicsKit. I highly
So I need to use sudo or is that neccasary in this case?
Thanks,
Mark
On Sep 22, 2004, at 9:29 AM, Ryan Perry wrote:
Learn to use CPAN. on newer versions of perl you can type:
cpan
you'll then get a new command line:
cpan
type install ModuleNameHere, so:
cpan install PerlMagick
sometimes you have
On Sep 22, 2004, at 12:16 PM, Mark Wheeler wrote:
I am about to install my first module.
And for that you've chosen Image::Magick? Nothing like jumping into the
deep end first, eh? :-)
First, how difficult is it to install these modules?
There are quite a few C libraries that are needed first,
On Sep 22, 2004, at 1:10 PM, Mark Wheeler wrote:
So I need to use sudo or is that neccasary in this case?
Yes, you need to run the CPAN shell with sudo.
On Sep 22, 2004, at 9:29 AM, Ryan Perry wrote:
sometimes you have to use force:
cpan force install PerlMagick
*Don't* just blindly do this
In regards to the pre-install package, would I need to install both the
Fat Camel AND Fat Camel - GraphicsKit, or just the GraphicsKit?
What I am intending to use the ImageMagick for is to manipulate images
that are uploaded and display them in different formats, basically a
photo gallery for
On 22 Sep 2004, at 17:16, Mark Wheeler wrote:
Hi,
I am about to install my first module. I've been learning perl for the
past several years and am building a web site that needs
ImageMagick/PerlMagick.
First, how difficult is it to install these modules?
I really really wouldn't start out by
Imager? I've not heard of that one. Can you give me a bit more info on
it? How is is different from ImageMagick?
Thanks,
Mark
On Sep 22, 2004, at 11:11 AM, william ross wrote:
On 22 Sep 2004, at 17:16, Mark Wheeler wrote:
Hi,
I am about to install my first module. I've been learning perl for the
On Sep 22, 2004, at 1:46 PM, Mark Wheeler wrote:
In regards to the pre-install package, would I need to install both
the Fat Camel AND Fat Camel - GraphicsKit, or just the GraphicsKit?
That's a good question. ;-)
I built and tested the GraphicsKit package with the Perl 5.8.4 that's
included in
On Sep 22, 2004, at 12:46 PM, Mark Wheeler wrote:
In regards to the pre-install package, would I need to install both
the Fat Camel AND Fat Camel - GraphicsKit, or just the GraphicsKit?
What I am intending to use the ImageMagick for is to manipulate images
that are uploaded and display them in
On Sep 22, 2004, at 2:11 PM, william ross wrote:
If you do have to use imagemagick, in the archives of this list you
will find several weary howto's
... of varying degrees of accuracy.
any chance at all of making it work you must first install fink
Nonsense. You must first install the C libraries
On Wed, 22 Sep 2004, Sherm Pendley wrote:
On Sep 22, 2004, at 2:11 PM, william ross wrote:
any chance at all of making it work you must first install fink
Nonsense. You must first install the C libraries you need. Fink is *one* way
to get them, not the only one.
It's certainly a very
There are instructions for installing ImageMagic on the ImageMagick
site. Should I just follow the Unix instructions? As well, it sounds
like I need to install the C libraries first, then ImageMagick. Also,
from what I gather, after I install the C libraries and ImageMagick,
then I need to
On Wed, 22 Sep 2004, Mark Wheeler wrote:
There are instructions for installing ImageMagic on the ImageMagick site.
Swell.
As I was saying though, if you install Fink, you can take advantage of
the fact that someone already automated all of this for you.
But hey, some people like
On 9/22/04 at 1:05 PM, [EMAIL PROTECTED] (Mark Wheeler) wrote:
This is why I'm looking at ImageMagick. Am I going in the right
direction here, or is there something else (Imager?) that will do the
same thing with less of an installation procedure?
Has anyone used the Darwin Port?
On Wed, 22 Sep 2004, Sherm Pendley wrote:
On Sep 22, 2004, at 4:13 PM, Chris Devers wrote:
If you really want to prove to yourself how much rounder your wheel will
be, then yes, use the Unix instructions.
Or, if you want to see how that wheel got so round. I'm all for
self-improvement!
On Sep 22, 2004, at 2:57 PM, Chris Devers wrote:
The ability to do this by hand can obviously be valuable, but it can
hardly be easier :-)
I didn't say it was easier without Fink, I said it was possible.
William stated that, to have *any* chance *at all* of making it work,
you *must* install
--- Ken Williams [EMAIL PROTECTED] wrote:
You might be interested in this page, entitled
Import Address Book
records into to Thunderbird :
http://www.macosxhints.com/article.php?story=20040905025741769
When I googled for thunderbird and address,
trying to learn what
thunderbird was,
Well the nice thing here is, it's for my family, not for work. This
particular project is done my spare time.. you know between 12am and
3am. :) So time wise, it's not a problem.
Mark
On Sep 22, 2004, at 2:05 PM, Sherm Pendley wrote:
On Sep 22, 2004, at 4:13 PM, Chris Devers wrote:
If you
Ok... it seems to me that my two best options are as follows:
1. Install fink and then install ImagaMagick (as per below)
2. Install PerlMagick
3. Install the addition C libraries so as to have access to image
manipulation and compression and such
or
1. Install the Darwin port of ImageMagick.
On Wed, 22 Sep 2004, Mark Wheeler wrote:
Ok... it seems to me that my two best options are as follows:
1. Install fink and then install ImagaMagick (as per below)
2. Install PerlMagick
3. Install the addition C libraries so as to have access to image manipulation
and compression and such
Agreed. Somtimes I overthink things and foget what the goal was in the
first place. I'll install fink then use you oneliner to install
image/perl magick. I'll let you know how it all goes.
Thanks again,
Mark
On Sep 22, 2004, at 3:31 PM, Chris Devers wrote:
On Wed, 22 Sep 2004, Mark Wheeler
On 22 Sep 2004, at 22:14, Sherm Pendley wrote:
On Sep 22, 2004, at 2:57 PM, Chris Devers wrote:
The ability to do this by hand can obviously be valuable, but it can
hardly be easier :-)
I didn't say it was easier without Fink, I said it was possible.
William stated that, to have *any* chance *at
You can also use the Darwin Ports facility to get a copy of ImageMagick:
$ port list | grep ImageMagick
ImageMagick graphics/ImageMagick6.0.2-7 Tools and
libraries to manipulate images in many formats
rb-rmagick ruby/rb-rmagick 1.5.0 The Ruby interface to
On 22 Sep 2004, at 19:21, Mark Wheeler wrote:
Imager? I've not heard of that one. Can you give me a bit more info on
it? How is is different from ImageMagick?
It's a little more to the point than imagemagick: it will resize,
translate and perform basic filters, but it lacks the more esoteric
25 matches
Mail list logo
