Re: upgrading VIM errors

[Ryan Schmidt]

On Jan 20, 2009, at 12:58, Timothy Goins wrote:

Thanks, Joel, that worked.  However, I ran into two problems that I  
found interesting.  When I ran "t...@cotopaxi:~$ sudo port clean -- 
all vim" the call returned "/opt/local/var/macports/build/ 
_opt_local_var_macports_sources_rsync.macports.org_release_ports_edito 
rs_vim/work/.macports.vim.state is not writable - check permission  
on port directory..."


When I did an "ls -al" the command returned the following:

drwxr-xr-x   4 root  admin   136 Jan 18 16:55 .
drwxr-xr-x   3 root  admin   102 Jan 18 16:55 ..
-rw-r--r--   1 root  admin   144 Jan 18 16:55 .macports.vim.state
drwxr-xr-x  43 root  admin  1462 Jan 18 16:55 vim72

Huh?  So, I did a chmod 666 on .macports.vim.state (although that  
didn't make much sense to me, since the file and directories were  
all writable by root) and ran "sudo port -f clean -all vim" and all  
was well.  I'm going to try a similar procedure on openssl, the  
only other active ports I can't seem to upgrade.


I cannot explain that; a command run using sudo should have  
permission to do virtually anything.


Okay, entirely different situation.  "sudo port upgrade openssl"  
looks for "cc", which somewhere along the way had disappeared from  
"/usr/bin."  So I created a symlink from /usr/gcc-4.0 to "cc" and  
all went well!


If /usr/bin/cc was absent from your system, it should not have been;  
if you got that symlink recreated pointing to gcc-4.0, then that's fine.


Ports should compile using /usr/bin/gcc-4.0 (or, more specifically, $ 
{configure.compiler}); if openssl is using "cc", then a bug needs to  
be filed against openssl.



___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Timothy Goins]

Thanks, Joel, that worked.  However, I ran into two problems that I  
found interesting.  When I ran "t...@cotopaxi:~$ sudo port clean --all  
vim" the call returned "/opt/local/var/macports/build/ 
_opt_local_var_macports_sources_rsync 
.macports.org_release_ports_editors_vim/work/.macports.vim.state is  
not writable - check permission on port directory..."


When I did an "ls -al" the command returned the following:

drwxr-xr-x   4 root  admin   136 Jan 18 16:55 .
drwxr-xr-x   3 root  admin   102 Jan 18 16:55 ..
-rw-r--r--   1 root  admin   144 Jan 18 16:55 .macports.vim.state
drwxr-xr-x  43 root  admin  1462 Jan 18 16:55 vim72

Huh?  So, I did a chmod 666 on .macports.vim.state (although that  
didn't make much sense to me, since the file and directories were all  
writable by root) and ran "sudo port -f clean -all vim" and all was  
well.  I'm going to try a similar procedure on openssl, the only other  
active ports I can't seem to upgrade.


Okay, entirely different situation.  "sudo port upgrade openssl" looks  
for "cc", which somewhere along the way had disappeared from "/usr/ 
bin."  So I created a symlink from /usr/gcc-4.0 to "cc" and all went  
well!


Thanks again,

Tim

On Jan 20, 2009, at 10:48 AM, Joel Thibault wrote:

[snip]

Undefined symbols:
  "__Xsetlocale", referenced from:
  _get_locale_val in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _main in main.o
  _main in main.o
  _enc_locale in mbyte.o
  _mac_lang_init in os_mac_conv.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[1]: *** [vim] Error 1
make: *** [all] Error 2

Error: Unable to upgrade port: 1


Try doing a selfupdate and clean first, at least for vim:

$ sudo port selfupdate
$ port clean --all vim
$ sudo port upgrade vim

That fixed the problem for me.

Joel




smime.p7s
Description: S/MIME cryptographic signature
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[William Davis]

On Jan 20, 2009, at 12:48 PM, Joel Thibault (MacPorts) wrote:



On Tue, Jan 20, 2009 at 12:38 PM, Timothy Goins ohce86-at- 
kitcarson.net |MacPorts|  wrote:
When I attempt to *upgrade outdated* openssl and vim fail; all other  
ports upgrade.  Here is the error stream for the vim failure:


t...@cotopaxi:~$ sudo port upgrade vim
--->  Building vim
Error: Target org.macports.build returned: shell command " cd "/opt/ 
local/var/macports/build/ 
_opt_local_var_macports_sources_rsync 
.macports.org_release_ports_editors_vim/work/vim72" && make all "  
returned error 2

Command output: Starting make in the src directory.
If there are problems, cd to the src directory and run make there
cd src && make all
/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/ 
include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/ 
FlatCarbon  -O -D_FORTIFY_SOURCE=1 version.c -o objects/ 
version.o
  /usr/bin/gcc-4.0   -L/opt/local/lib -L/usr/local/lib 	-o vim  
objects/buffer.o objects/charset.o objects/diff.o objects/digraph.o  
objects/edit.o objects/eval.o objects/ex_cmds.o objects/ex_cmds2.o  
objects/ex_docmd.o objects/ex_eval.o objects/ex_getln.o objects/ 
fileio.o objects/fold.o objects/getchar.o objects/hardcopy.o objects/ 
hashtab.o  objects/if_cscope.o objects/if_xcmdsrv.o objects/main.o  
objects/mark.o objects/memfile.o objects/memline.o objects/menu.o  
objects/message.o objects/misc1.o objects/misc2.o objects/move.o  
objects/mbyte.o objects/normal.o objects/ops.o objects/option.o  
objects/os_unix.o objects/pathdef.o objects/popupmnu.o objects/ 
quickfix.o objects/regexp.o objects/screen.o objects/search.o  
objects/spell.o objects/syntax.o  objects/tag.o objects/term.o  
objects/ui.o objects/undo.o objects/window.o   objects/ 
os_macosx.o objects/os_mac_conv.o  objects/netbeans.o  objects/ 
version.o   -lm  -lncurses -liconv -framework Carbon

Undefined symbols:
  "__Xsetlocale", referenced from:
  _get_locale_val in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _main in main.o
  _main in main.o
  _enc_locale in mbyte.o
  _mac_lang_init in os_mac_conv.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[1]: *** [vim] Error 1
make: *** [all] Error 2

Error: Unable to upgrade port: 1


Try doing a selfupdate and clean first, at least for vim:

$ sudo port selfupdate
$ port clean --all vim
$ sudo port upgrade vim

That fixed the problem for me.

Joel



--
Joel Thibault [AIM: Jole Tebo]
Software Engineer in Boston


fixed it for me also


William Davis
frstanATbellsouthDOTnet
Mac OS X.5.6 Darwin 9.5.0
XQuartz 2.3.2 (xorg-server 1.4.2-apple31)
Mac Mini Intel Duo @ 1.86 GHz

Mundus vult decepi, ego non

___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Joel Thibault (MacPorts)]

On Tue, Jan 20, 2009 at 12:38 PM, Timothy Goins
ohce86-at-kitcarson.net|MacPorts|
 wrote:

> When I attempt to *upgrade outdated* openssl and vim fail; all other ports
> upgrade.  Here is the error stream for the vim failure:
> t...@cotopaxi:~$ sudo port upgrade vim
> --->  Building vim
> Error: Target org.macports.build returned: shell command " cd
> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_editors_vim/work/vim72"
> && make all " returned error 2
> Command output: Starting make in the src directory.
> If there are problems, cd to the src directory and run make there
> cd src && make all
> /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/include
> -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon  -O
> -D_FORTIFY_SOURCE=1 version.c -o objects/version.o
>   /usr/bin/gcc-4.0   -L/opt/local/lib -L/usr/local/lib -o vim
> objects/buffer.o objects/charset.o objects/diff.o objects/digraph.o
> objects/edit.o objects/eval.o objects/ex_cmds.o objects/ex_cmds2.o
> objects/ex_docmd.o objects/ex_eval.o objects/ex_getln.o objects/fileio.o
> objects/fold.o objects/getchar.o objects/hardcopy.o objects/hashtab.o
>  objects/if_cscope.o objects/if_xcmdsrv.o objects/main.o objects/mark.o
> objects/memfile.o objects/memline.o objects/menu.o objects/message.o
> objects/misc1.o objects/misc2.o objects/move.o objects/mbyte.o
> objects/normal.o objects/ops.o objects/option.o objects/os_unix.o
> objects/pathdef.o objects/popupmnu.o objects/quickfix.o objects/regexp.o
> objects/screen.o objects/search.o objects/spell.o objects/syntax.o
>  objects/tag.o objects/term.o objects/ui.o objects/undo.o objects/window.o
> objects/os_macosx.o objects/os_mac_conv.o  objects/netbeans.o
>  objects/version.o   -lm  -lncurses -liconv -framework Carbon
> Undefined symbols:
>   "__Xsetlocale", referenced from:
>   _get_locale_val in ex_cmds2.o
>   _ex_language in ex_cmds2.o
>   _ex_language in ex_cmds2.o
>   _ex_language in ex_cmds2.o
>   _main in main.o
>   _main in main.o
>   _enc_locale in mbyte.o
>   _mac_lang_init in os_mac_conv.o
> ld: symbol(s) not found
> collect2: ld returned 1 exit status
> make[1]: *** [vim] Error 1
> make: *** [all] Error 2
>
> Error: Unable to upgrade port: 1
>


Try doing a selfupdate and clean first, at least for vim:

$ sudo port selfupdate
$ port clean --all vim
$ sudo port upgrade vim

That fixed the problem for me.

Joel



-- 
Joel Thibault [AIM: Jole Tebo]
Software Engineer in Boston
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Timothy Goins]

When I attempt to *upgrade outdated* openssl and vim fail; all other  
ports upgrade.  Here is the error stream for the vim failure:


t...@cotopaxi:~$ sudo port upgrade vim
--->  Building vim
Error: Target org.macports.build returned: shell command " cd "/opt/ 
local/var/macports/build/ 
_opt_local_var_macports_sources_rsync 
.macports.org_release_ports_editors_vim/work/vim72" && make all "  
returned error 2

Command output: Starting make in the src directory.
If there are problems, cd to the src directory and run make there
cd src && make all
/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/include  
-DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon  -O - 
D_FORTIFY_SOURCE=1 version.c -o objects/version.o
  /usr/bin/gcc-4.0   -L/opt/local/lib -L/usr/local/lib 	-o vim  
objects/buffer.o objects/charset.o objects/diff.o objects/digraph.o  
objects/edit.o objects/eval.o objects/ex_cmds.o objects/ex_cmds2.o  
objects/ex_docmd.o objects/ex_eval.o objects/ex_getln.o objects/ 
fileio.o objects/fold.o objects/getchar.o objects/hardcopy.o objects/ 
hashtab.o  objects/if_cscope.o objects/if_xcmdsrv.o objects/main.o  
objects/mark.o objects/memfile.o objects/memline.o objects/menu.o  
objects/message.o objects/misc1.o objects/misc2.o objects/move.o  
objects/mbyte.o objects/normal.o objects/ops.o objects/option.o  
objects/os_unix.o objects/pathdef.o objects/popupmnu.o objects/ 
quickfix.o objects/regexp.o objects/screen.o objects/search.o objects/ 
spell.o objects/syntax.o  objects/tag.o objects/term.o objects/ui.o  
objects/undo.o objects/window.o   objects/os_macosx.o objects/ 
os_mac_conv.o  objects/netbeans.o  objects/version.o   -lm  - 
lncurses -liconv -framework Carbon

Undefined symbols:
  "__Xsetlocale", referenced from:
  _get_locale_val in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _main in main.o
  _main in main.o
  _enc_locale in mbyte.o
  _mac_lang_init in os_mac_conv.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[1]: *** [vim] Error 1
make: *** [all] Error 2

Error: Unable to upgrade port: 1

On Jan 20, 2009, at 6:48 AM, Mark Hattam wrote:



On 19 Jan 2009, at 00:20, Bryan Blackburn wrote:


On Mon, Jan 19, 2009 at 12:06:38AM +, Mark Hattam said:
[...]

iMac:~ mark$ sudo port upgrade outdated
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim

[...]

Undefined symbols:
"__Xsetlocale", referenced from:


Looks like #17606:



Bryan

[...]


Mark



Selfupdate'd just now ... lunchtime 20 Jan

The following installed ports are outdated:
curl   7.19.2_0 < 7.19.3_0
vim7.2.077_0 < 7.2.077_1

and

iMac:~ mark$ sudo port upgrade outdated

[curl installed OK, then ...]

Portfile changed since last build; discarding previous state.
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim
--->  Staging vim into destroot
--->  Deactivating vim @7.2.077_0
--->  Installing vim @7.2.077_1
--->  Activating vim @7.2.077_1
--->  Cleaning vim

So the Portfile's changed but the same _1 version ... and it worked.

Mark
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users




smime.p7s
Description: S/MIME cryptographic signature
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Rainer Müller]

Mark Hattam wrote:
> Portfile changed since last build; discarding previous state.
> --->  Fetching vim
> --->  Verifying checksum(s) for vim
> --->  Extracting vim
> --->  Applying patches to vim
> --->  Configuring vim
> --->  Building vim
> --->  Staging vim into destroot
> --->  Deactivating vim @7.2.077_0
> --->  Installing vim @7.2.077_1
> --->  Activating vim @7.2.077_1
> --->  Cleaning vim
> 
> So the Portfile's changed but the same _1 version ... and it worked.

Thanks for the confirmation that the patch supplied by Bryan works. I
didn't bump the revision as the problem only affected users on install
and not users who already got it installed.

Rainer
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Mark Hattam]

On 19 Jan 2009, at 00:20, Bryan Blackburn wrote:


On Mon, Jan 19, 2009 at 12:06:38AM +, Mark Hattam said:
[...]

iMac:~ mark$ sudo port upgrade outdated
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim

[...]

Undefined symbols:
 "__Xsetlocale", referenced from:


Looks like #17606:



Bryan

[...]


Mark



Selfupdate'd just now ... lunchtime 20 Jan

The following installed ports are outdated:
curl   7.19.2_0 < 7.19.3_0
vim7.2.077_0 < 7.2.077_1

and

iMac:~ mark$ sudo port upgrade outdated

[curl installed OK, then ...]

Portfile changed since last build; discarding previous state.
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim
--->  Staging vim into destroot
--->  Deactivating vim @7.2.077_0
--->  Installing vim @7.2.077_1
--->  Activating vim @7.2.077_1
--->  Cleaning vim

So the Portfile's changed but the same _1 version ... and it worked.

Mark
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Bryan Blackburn]

On Sun, Jan 18, 2009 at 07:49:16PM -0600, Ryan Schmidt said:
>
> On Jan 18, 2009, at 18:51, Adam Dershowitz wrote:
>
>> Along the way it also installed python26!  It looks like this is  
>> because it installed xorg-xcb-proto @1.3_0+python26.  I am not sure if 
>> this will work or not because I have not, and was not planning to run:  
>> sudo python_select python26.
>
> It is not necessary to run "sudo python_select python26" unless you want 
> to be able to type "python" and have it run python26. Any port that 
> depends on python26 (or any other python) should function correctly 
> without using python_select. Perhaps the message printed by the python 
> ports could be worded differently, so that it is not implied that running 
> python_select is necessary.

There could be some ports which do in fact need a version selected as the
Current version setting for the framework
(${prefix}/Library/Frameworks/Python.framework/Version/Current and the
symlinks in just Python.framework/) are used when linking to it.

Thought I believe it's been suggested before that the first python port
installed should probably be automatically python_select'd...

Bryan

___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Ryan Schmidt]

On Jan 18, 2009, at 18:51, Adam Dershowitz wrote:

Along the way it also installed python26!  It looks like this is  
because it installed xorg-xcb-proto @1.3_0+python26.  I am not sure  
if this will work or not because I have not, and was not planning  
to run:  sudo python_select python26.


It is not necessary to run "sudo python_select python26" unless you  
want to be able to type "python" and have it run python26. Any port  
that depends on python26 (or any other python) should function  
correctly without using python_select. Perhaps the message printed by  
the python ports could be worded differently, so that it is not  
implied that running python_select is necessary.



___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Timothy Goins]

I get exactly the same error output; however, I'm upgrading (or trying  
to) from "vim @7.2.021_0 (active)".  Also lots of xorg upgrades that  
succeed and a python that doesn't.  Frustrating!  openssl and vim are  
the only active ports that are outdated and won't upgrade on my system.


Tim
On Jan 18, 2009, at 5:06 PM, Mark Hattam wrote:

Did a selfupdate on Macports 1.7 running on OSX 10.5.6, then a port  
outdated ...


iMac:~ mark$ sudo port outdated
The following installed ports are outdated:
vim7.2.077_0 < 7.2.077_1


iMac:~ mark$ sudo port upgrade outdated
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim
Error: Target org.macports.build returned: shell command " cd "/opt/ 
local/var/macports/build/ 
_opt_local_var_macports_sources_rsync 
.macports.org_release_ports_editors_vim/work/vim72" && make all "  
returned error 2
Command output: /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/ 
opt/local/include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/ 
Headers/FlatCarbon  -O -D_FORTIFY_SOURCE=1 -o objects/ 
quickfix.o quickfix.c
/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/ 
include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/ 
FlatCarbon  -O -D_FORTIFY_SOURCE=1 -o objects/regexp.o  
regexp.c


[lots more of these FORTIFY_SOURCE lines ending with ...]

/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/ 
include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/ 
FlatCarbon  -O -D_FORTIFY_SOURCE=1 version.c -o objects/ 
version.o
 /usr/bin/gcc-4.0   -L/opt/local/lib 	-o vim objects/buffer.o  
objects/charset.o objects/diff.o objects/digraph.o objects/edit.o  
objects/eval.o objects/ex_cmds.o objects/ex_cmds2.o objects/ 
ex_docmd.o objects/ex_eval.o objects/ex_getln.o objects/fileio.o  
objects/fold.o objects/getchar.o objects/hardcopy.o objects/ 
hashtab.o  objects/if_cscope.o objects/if_xcmdsrv.o objects/main.o  
objects/mark.o objects/memfile.o objects/memline.o objects/menu.o  
objects/message.o objects/misc1.o objects/misc2.o objects/move.o  
objects/mbyte.o objects/normal.o objects/ops.o objects/option.o  
objects/os_unix.o objects/pathdef.o objects/popupmnu.o objects/ 
quickfix.o objects/regexp.o objects/screen.o objects/search.o  
objects/spell.o objects/syntax.o  objects/tag.o objects/term.o  
objects/ui.o objects/undo.o objects/window.o   objects/ 
os_macosx.o objects/os_mac_conv.o  objects/netbeans.o  objects/ 
version.o   -lm  -lncurses -liconv -framework Carbon

Undefined symbols:
 "__Xsetlocale", referenced from:
 _get_locale_val in ex_cmds2.o
 _ex_language in ex_cmds2.o
 _ex_language in ex_cmds2.o
 _ex_language in ex_cmds2.o
 _main in main.o
 _main in main.o
 _enc_locale in mbyte.o
 _mac_lang_init in os_mac_conv.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[1]: *** [vim] Error 1
make: *** [all] Error 2

Error: Unable to upgrade port: 1


Previous updates to VIM have worked OK.

iMac:~ mark$ sudo port installed | grep vim
 vim @7.2.077_0 (active)


Previously today, gd2 was updated
--->  Deactivating gd2 @2.0.35_2
--->  Installing gd2 @2.0.35_3

whose upgrade process downloaded, built, installed and activated 70  
(seventy) xorg- packages ...



Mark

___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users




smime.p7s
Description: S/MIME cryptographic signature
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Adam Dershowitz]

On Jan 18, 2009, at 4:06 PM, Mark Hattam wrote:

Did a selfupdate on Macports 1.7 running on OSX 10.5.6, then a port  
outdated ...




iMac:~ mark$ sudo port upgrade outdated






Previously today, gd2 was updated
--->  Deactivating gd2 @2.0.35_2
--->  Installing gd2 @2.0.35_3

whose upgrade process downloaded, built, installed and activated 70  
(seventy) xorg- packages ...



Mark



I also did an upgrade that is still going...with a whole bunch of xorg  
packages (I didn't count, like you did).  I think that some of these  
got installed also because of a change in xrender.  So some got  
installed as that was upgrading.
Along the way it also installed python26!  It looks like this is  
because it installed xorg-xcb-proto @1.3_0+python26.  I am not sure if  
this will work or not because I have not, and was not planning to  
run:  sudo python_select python26.


--Adam
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Fwd: upgrading VIM errors

[Mark Hattam]

Begin forwarded message:


From: Adam Dershowitz <>
Date: 19 January 2009 00:28:44 GMT
To: Mark Hattam 
Subject: Re: upgrading VIM errors


On Jan 18, 2009, at 4:06 PM, Mark Hattam wrote:

Did a selfupdate on Macports 1.7 running on OSX 10.5.6, then a port  
outdated ...


iMac:~ mark$ sudo port outdated
The following installed ports are outdated:
vim7.2.077_0 < 7.2.077_1


iMac:~ mark$ sudo port upgrade outdated



Previously today, gd2 was updated
--->  Deactivating gd2 @2.0.35_2
--->  Installing gd2 @2.0.35_3

whose upgrade process downloaded, built, installed and activated 70  
(seventy) xorg- packages ...



Mark


I also did an upgrade that is still going...with a whole bunch of  
xorg packages (I didn't count, like you did).  I think that some of  
these got installed also because of a change in xrender.  So some  
got installed as that was upgrading.
Along the way it also installed python26!  It looks like this is  
because it installed xorg-xcb-proto @1.3_0+python26.  I am not sure  
if this will work or not because I have not, and was not planning to  
run:  sudo python_select python26.





>I< didn't count ... computers are good at that :-)

iMac:~ mark$ sudo port installed | grep xorg -c
70


Mark
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Mark Hattam]

On 19 Jan 2009, at 00:20, Bryan Blackburn wrote:


On Mon, Jan 19, 2009 at 12:06:38AM +, Mark Hattam said:
[...]

iMac:~ mark$ sudo port upgrade outdated
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim

[...]

Undefined symbols:
 "__Xsetlocale", referenced from:


Looks like #17606:



Bryan

[...]


Mark



The previous version upgrade built without a problem ... so this seems  
a newer problem - or a problem that didn't affect 7.2.077_0


vim7.2.077_0 < 7.2.077_1

Today "update" seems to have been forced as a result of the X11  
changes detailed in the email

subject: [45603] trunk/dports
x11 dependent ports: Force port: based X11 dependencies

Mark
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

Re: upgrading VIM errors

[Bryan Blackburn]

On Mon, Jan 19, 2009 at 12:06:38AM +, Mark Hattam said:
[...]
> iMac:~ mark$ sudo port upgrade outdated
> --->  Fetching vim
> --->  Verifying checksum(s) for vim
> --->  Extracting vim
> --->  Applying patches to vim
> --->  Configuring vim
> --->  Building vim
[...]
> Undefined symbols:
>   "__Xsetlocale", referenced from:

Looks like #17606:



Bryan

[...]
>
> Mark
___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users

upgrading VIM errors

[Mark Hattam]

Did a selfupdate on Macports 1.7 running on OSX 10.5.6, then a port  
outdated ...


iMac:~ mark$ sudo port outdated
The following installed ports are outdated:
vim7.2.077_0 < 7.2.077_1


iMac:~ mark$ sudo port upgrade outdated
--->  Fetching vim
--->  Verifying checksum(s) for vim
--->  Extracting vim
--->  Applying patches to vim
--->  Configuring vim
--->  Building vim
Error: Target org.macports.build returned: shell command " cd "/opt/ 
local/var/macports/build/ 
_opt_local_var_macports_sources_rsync 
.macports.org_release_ports_editors_vim/work/vim72" && make all "  
returned error 2
Command output: /usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/ 
opt/local/include -DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/ 
FlatCarbon  -O -D_FORTIFY_SOURCE=1 -o objects/quickfix.o  
quickfix.c
/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/include  
-DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon  -O - 
D_FORTIFY_SOURCE=1 -o objects/regexp.o regexp.c


[lots more of these FORTIFY_SOURCE lines ending with ...]

/usr/bin/gcc-4.0 -c -I. -Iproto -DHAVE_CONFIG_H   -I/opt/local/include  
-DMACOS_X_UNIX -no-cpp-precomp -I/Developer/Headers/FlatCarbon  -O - 
D_FORTIFY_SOURCE=1 version.c -o objects/version.o
  /usr/bin/gcc-4.0   -L/opt/local/lib 	-o vim objects/buffer.o  
objects/charset.o objects/diff.o objects/digraph.o objects/edit.o  
objects/eval.o objects/ex_cmds.o objects/ex_cmds2.o objects/ex_docmd.o  
objects/ex_eval.o objects/ex_getln.o objects/fileio.o objects/fold.o  
objects/getchar.o objects/hardcopy.o objects/hashtab.o  objects/ 
if_cscope.o objects/if_xcmdsrv.o objects/main.o objects/mark.o objects/ 
memfile.o objects/memline.o objects/menu.o objects/message.o objects/ 
misc1.o objects/misc2.o objects/move.o objects/mbyte.o objects/ 
normal.o objects/ops.o objects/option.o objects/os_unix.o objects/ 
pathdef.o objects/popupmnu.o objects/quickfix.o objects/regexp.o  
objects/screen.o objects/search.o objects/spell.o objects/syntax.o   
objects/tag.o objects/term.o objects/ui.o objects/undo.o objects/ 
window.o   objects/os_macosx.o objects/os_mac_conv.o  objects/ 
netbeans.o  objects/version.o   -lm  -lncurses -liconv -framework  
Carbon

Undefined symbols:
  "__Xsetlocale", referenced from:
  _get_locale_val in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _ex_language in ex_cmds2.o
  _main in main.o
  _main in main.o
  _enc_locale in mbyte.o
  _mac_lang_init in os_mac_conv.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
make[1]: *** [vim] Error 1
make: *** [all] Error 2

Error: Unable to upgrade port: 1


Previous updates to VIM have worked OK.

iMac:~ mark$ sudo port installed | grep vim
  vim @7.2.077_0 (active)


Previously today, gd2 was updated
--->  Deactivating gd2 @2.0.35_2
--->  Installing gd2 @2.0.35_3

whose upgrade process downloaded, built, installed and activated 70  
(seventy) xorg- packages ...



Mark

___
macports-users mailing list
macports-users@lists.macosforge.org
http://lists.macosforge.org/mailman/listinfo.cgi/macports-users