Re: OpenCV problem
Hi Eyal, Could you please paste the error you are getting while compilation. Thanks Shamsul Courage is contagious On Sat, Oct 13, 2012 at 6:26 PM, Eyal Erez ere...@gmail.com wrote: Hello shamsul, I was wondering if u have Nokia N900 , and may u please help me. I found this site http://www.samontab.com/web/ and i got everything ok until the compiling part, and i wanted to check if it's a problem in my phone (probebly.. :-( ) or not. So, can u help me and try it on ur phone.. I think that i'm asking a lot, but i dont really know a lot of pepole that can help me with that... :-( and, again any help about openCV and N900 will be welcome Sincerely, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
no, i ment if there is an example on how to check that the opencv lib is working. some small code that i can know that i can use opencv... eyal On Mon, Sep 24, 2012 at 9:00 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: You are welcome! GNU/Linux consist of a lot of subsystems. Each must be checked to make sure everything is working properly. On the other hand, when something is not working, user will likely notice, so no need for a code. Thanks, Daniil On Mon, Sep 24, 2012 at 6:56 PM, Eyal Erez ere...@gmail.com wrote: Ok so to the Result: i added the lines that were missing in the /etc/apt/souces.list.d/hildon-application-manager.list file. as abubakear wrote. did apt-get update and then apt-get install libcv4 --and it's seems to be working. now First of ALL i want to thank Daniil and abubakar for all the help... thanks a lot guys. now does anybody know how i can check that everything is working , some small code to check the system? Again thanks a lot guys On Fri, Sep 21, 2012 at 8:31 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: Apparently, it would be much easier to place content you've posted to /etc/apt/souces.list.d/hildon-application-manager.list and make sure that /etc/apt/sources.list is empty. Thanks, Daniil On Fri, Sep 21, 2012 at 9:03 PM, Abubakar abubak...@gmail.com wrote: Well one option is to flash your phone and you can read instructions here http://wiki.maemo.org/Updating_the_tablet_firmware. You can use the built-in Backup application to take a backup, put it on your pc and flash the cell phone and then transfer back the backup to phone and restore it (using mass storage option). That flashing info page contains info for many maemo devces other then n900, so try to focus on the right things :) On Fri, Sep 21, 2012 at 9:07 PM, Eyal Erez ere...@gmail.com wrote: Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Do you have the Maemo SDK? I have not used opencv before, but I think if you try to find some code of it and then build it in the maemo sdk and transfer to the device, you'll have what you'll need. Also google for: OpenCV N900 you'll come across some posts on talk.maemo.org that'll help you. For N900 sometimes a very helpful search is at http://maemo.org/packages, I was looking for opencv there and found this: http://maemo.org/packages/view/opencv-doc/ says: *This package contains the OpenCV documentation and example programs.* Also I found this http://paperairoplane.net/?p=274 On Tue, Sep 25, 2012 at 4:04 PM, Eyal Erez ere...@gmail.com wrote: no, i ment if there is an example on how to check that the opencv lib is working. some small code that i can know that i can use opencv... eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Ok so to the Result: i added the lines that were missing in the /etc/apt/souces.list.d/hildon-application-manager.list file. as abubakar wrote. did apt-get update and then apt-get install libcv4 --and it's seems to be working. now First of ALL i want to thank Daniil and abubakar for all the help... thanks a lot guys. now does anybody know how i can check that everything is working , some small code to check the system? Again thanks a lot guys On Fri, Sep 21, 2012 at 8:31 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: Apparently, it would be much easier to place content you've posted to /etc/apt/souces.list.d/hildon-application-manager.list and make sure that /etc/apt/sources.list is empty. Thanks, Daniil On Fri, Sep 21, 2012 at 9:03 PM, Abubakar abubak...@gmail.com wrote: Well one option is to flash your phone and you can read instructions here http://wiki.maemo.org/Updating_the_tablet_firmware. You can use the built-in Backup application to take a backup, put it on your pc and flash the cell phone and then transfer back the backup to phone and restore it (using mass storage option). That flashing info page contains info for many maemo devces other then n900, so try to focus on the right things :) On Fri, Sep 21, 2012 at 9:07 PM, Eyal Erez ere...@gmail.com wrote: Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
You are welcome! GNU/Linux consist of a lot of subsystems. Each must be checked to make sure everything is working properly. On the other hand, when something is not working, user will likely notice, so no need for a code. Thanks, Daniil On Mon, Sep 24, 2012 at 6:56 PM, Eyal Erez ere...@gmail.com wrote: Ok so to the Result: i added the lines that were missing in the /etc/apt/souces.list.d/hildon-application-manager.list file. as abubakear wrote. did apt-get update and then apt-get install libcv4 --and it's seems to be working. now First of ALL i want to thank Daniil and abubakar for all the help... thanks a lot guys. now does anybody know how i can check that everything is working , some small code to check the system? Again thanks a lot guys On Fri, Sep 21, 2012 at 8:31 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: Apparently, it would be much easier to place content you've posted to /etc/apt/souces.list.d/hildon-application-manager.list and make sure that /etc/apt/sources.list is empty. Thanks, Daniil On Fri, Sep 21, 2012 at 9:03 PM, Abubakar abubak...@gmail.com wrote: Well one option is to flash your phone and you can read instructions here http://wiki.maemo.org/Updating_the_tablet_firmware. You can use the built-in Backup application to take a backup, put it on your pc and flash the cell phone and then transfer back the backup to phone and restore it (using mass storage option). That flashing info page contains info for many maemo devces other then n900, so try to focus on the right things :) On Fri, Sep 21, 2012 at 9:07 PM, Eyal Erez ere...@gmail.com wrote: Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal On Thu, Sep 20, 2012 at 2:29 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: Thank you very mych, Abubakar! As I expected there is no really SDK repository as it's not meant to be used on the device. My guess would be that apt configuration on Eyal's N900 was messed up at some point and now have to be restored to pristine state to work again. Thanks, Daniil On Thu, Sep 20, 2012 at 10:54 AM, Abubakar abubak...@gmail.com wrote: sorry i didnt do a reply-all, so sending again: my /etc/apt/sources.list is empty. /etc/apt/souces.list.d/ has hildon-application-manager.list which contains: deb https://downloads.maemo.nokia.com/fremantle/ssu/apps/ ./ deb https://downloads.maemo.nokia.com/fremantle/ssu/003 ./ deb https://downloads.maemo.nokia.com/fremantle1.2/ovi/ ./ deb http://repository.maemo.org/extras/ fremantle-1.3 free non-free deb http://repository.maemo.org/extras-devel/ fremantle-1.3 free non-free On Thu, Sep 20, 2012 at 11:34 AM, Daniil Ivanov daniil.iva...@gmail.com wrote: Could anyone please share content of /etc/apt/sources.list and /etc/apt/sources.list.d/ from their N900 for a cross check? Thanks, Daniil On Wed, Sep 19, 2012 at 12:55 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: I don't have N900 any more, so I cannot check. But it looks like it's related to configuration of Nokia closed source packages. You need to fetch the key afer signing the EULA and let apt know the key as it's explained in the page http://tablets-dev.nokia.com/eula/index.php This command will show the content of apt current configuration in command line: cat /etc/apt/sources.list Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Well one option is to flash your phone and you can read instructions here http://wiki.maemo.org/Updating_the_tablet_firmware. You can use the built-in Backup application to take a backup, put it on your pc and flash the cell phone and then transfer back the backup to phone and restore it (using mass storage option). That flashing info page contains info for many maemo devces other then n900, so try to focus on the right things :) On Fri, Sep 21, 2012 at 9:07 PM, Eyal Erez ere...@gmail.com wrote: Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Apparently, it would be much easier to place content you've posted to /etc/apt/souces.list.d/hildon-application-manager.list and make sure that /etc/apt/sources.list is empty. Thanks, Daniil On Fri, Sep 21, 2012 at 9:03 PM, Abubakar abubak...@gmail.com wrote: Well one option is to flash your phone and you can read instructions here http://wiki.maemo.org/Updating_the_tablet_firmware. You can use the built-in Backup application to take a backup, put it on your pc and flash the cell phone and then transfer back the backup to phone and restore it (using mass storage option). That flashing info page contains info for many maemo devces other then n900, so try to focus on the right things :) On Fri, Sep 21, 2012 at 9:07 PM, Eyal Erez ere...@gmail.com wrote: Well, that's doesn't sound good for me. So is there a manual how to reset the phone, in a way that i will ensure that i could work with OpenCV afterwards?? Again, thank u very much for the help and info Great appreciation to all. eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Could anyone please share content of /etc/apt/sources.list and /etc/apt/sources.list.d/ from their N900 for a cross check? Thanks, Daniil On Wed, Sep 19, 2012 at 12:55 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: I don't have N900 any more, so I cannot check. But it looks like it's related to configuration of Nokia closed source packages. You need to fetch the key afer signing the EULA and let apt know the key as it's explained in the page http://tablets-dev.nokia.com/eula/index.php This command will show the content of apt current configuration in command line: cat /etc/apt/sources.list Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
sorry i didnt do a reply-all, so sending again: my /etc/apt/sources.list is empty. /etc/apt/souces.list.d/ has hildon-application-manager.list which contains: deb https://downloads.maemo.nokia.com/fremantle/ssu/apps/ ./ deb https://downloads.maemo.nokia.com/fremantle/ssu/003 ./ deb https://downloads.maemo.nokia.com/fremantle1.2/ovi/ ./ deb http://repository.maemo.org/extras/ fremantle-1.3 free non-free deb http://repository.maemo.org/extras-devel/ fremantle-1.3 free non-free On Thu, Sep 20, 2012 at 11:34 AM, Daniil Ivanov daniil.iva...@gmail.comwrote: Could anyone please share content of /etc/apt/sources.list and /etc/apt/sources.list.d/ from their N900 for a cross check? Thanks, Daniil On Wed, Sep 19, 2012 at 12:55 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: I don't have N900 any more, so I cannot check. But it looks like it's related to configuration of Nokia closed source packages. You need to fetch the key afer signing the EULA and let apt know the key as it's explained in the page http://tablets-dev.nokia.com/eula/index.php This command will show the content of apt current configuration in command line: cat /etc/apt/sources.list Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Thank you very mych, Abubakar! As I expected there is no really SDK repository as it's not meant to be used on the device. My guess would be that apt configuration on Eyal's N900 was messed up at some point and now have to be restored to pristine state to work again. Thanks, Daniil On Thu, Sep 20, 2012 at 10:54 AM, Abubakar abubak...@gmail.com wrote: sorry i didnt do a reply-all, so sending again: my /etc/apt/sources.list is empty. /etc/apt/souces.list.d/ has hildon-application-manager.list which contains: deb https://downloads.maemo.nokia.com/fremantle/ssu/apps/ ./ deb https://downloads.maemo.nokia.com/fremantle/ssu/003 ./ deb https://downloads.maemo.nokia.com/fremantle1.2/ovi/ ./ deb http://repository.maemo.org/extras/ fremantle-1.3 free non-free deb http://repository.maemo.org/extras-devel/ fremantle-1.3 free non-free On Thu, Sep 20, 2012 at 11:34 AM, Daniil Ivanov daniil.iva...@gmail.com wrote: Could anyone please share content of /etc/apt/sources.list and /etc/apt/sources.list.d/ from their N900 for a cross check? Thanks, Daniil On Wed, Sep 19, 2012 at 12:55 PM, Daniil Ivanov daniil.iva...@gmail.com wrote: I don't have N900 any more, so I cannot check. But it looks like it's related to configuration of Nokia closed source packages. You need to fetch the key afer signing the EULA and let apt know the key as it's explained in the page http://tablets-dev.nokia.com/eula/index.php This command will show the content of apt current configuration in command line: cat /etc/apt/sources.list Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
On Tue, Sep 18, 2012 at 10:39 PM, Eyal Erez ere...@gmail.com wrote: I'm thinking about using linux, i even install it, but i'm not familier with that and i'm not that familier with Nokia OS(Meamo) so i try minimize that things that i don't know .. The name of OS is Maemo, and it's actually Debian based, so it shares many tools with Debian and Ubuntu, making it much easier to do things there. i type apt-get quits and i get : E:Invalid opertion quits Whenever in future you have doubts about what commands parameters are and what they actually do, consult their manual pages: http://linux.die.net/man/8/apt-get then i type exit twice and close the X-Terminal and still the file is empty. what can i do to solve this? i also check and i can reach the file in windows but i's empty I'm puzzled why this happens for you. Maybe you interrupt apt-get before it's able to produce any error messages. The error msg that i get are : Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages 404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages 404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. I don't have N900 any more, so I cannot check. But it looks like it's related to configuration of Nokia closed source packages. You need to fetch the key afer signing the EULA and let apt know the key as it's explained in the page http://tablets-dev.nokia.com/eula/index.php This command will show the content of apt current configuration in command line: cat /etc/apt/sources.list Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Hello i did the: apt-get clear , and i got new line i think it's ok. but then i wrote apt-get update eyal.log and it writes a lot of stuff and then the errors i wrote before, but i dont get a new line until i will press enter.. then i use midnight Comm in order to copy the file to a place where i can use(copy to windows 8 file system) or using the mail app to send it (i cant reach it using the nokia pc-connectivity or the mass storage.. ) but it seems the file is empty... eyal On Mon, Sep 17, 2012 at 3:07 PM, Abubakar abubak...@gmail.com wrote: sending my email again, the last one got held cuz it exceeded 20k in the body message. Strange. Anyway I wrote: oh :) ... sorry for the misunderstanding since you wrote: Could you please post full output of apt-get update, I was further telling Eyal that do a apt-get clean first and then the update of it, and then paste the logs here. Just wanted him to do a clean first. On Mon, Sep 17, 2012 at 5:00 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: Hi Abubakar, I have to confess I don't really understand your message. According to you previous mail everything is working fine and as expected for you. Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
On Tue, Sep 18, 2012 at 7:30 PM, Eyal Erez ere...@gmail.com wrote: but then i wrote apt-get update eyal.log and it writes a lot of stuff and then the errors i wrote before, but i dont get a new line until i will press enter.. This command redirects both error stream and output stream to a file, you should see exactly nothing until apt-get quits. Also I didn't notice you were mentioning errors at update phase. Could you please provide exact error messages? then i use midnight Comm in order to copy the file to a place where i can use(copy to windows 8 file system) or using the mail app to send it (i cant reach it using the nokia pc-connectivity or the mass storage.. ) but it seems the file is empty... In mass storage mode /home/user/MyDocs/ gets mounted to your PC. However, when you start X terminal a working directory is /home/user/ So to make it easier for yourself you have two options: 1. Use ssh with USB-networking. AFAIK it didn't work on Windows 7, does Windows 8 has a driver for networking over USB? 2. Execute cd MyDocs before apt-get update eyal.log, then mount phone to PC in Mass storage mode and copy the file. Also consider using Linux for Linux development. It will make your life easier. Thanks, Daniil ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
I'm thinking about using linux, i even install it, but i'm not familier with that and i'm not that familier with Nokia OS(Meamo) so i try minimize that things that i don't know .. i type apt-get quits and i get : E:Invalid opertion quits then i type exit twice and close the X-Terminal and still the file is empty. what can i do to solve this? i also check and i can reach the file in windows but i's empty The error msg that i get are : Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages 404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages 404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. Thank, Eyal On Tue, Sep 18, 2012 at 8:21 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: On Tue, Sep 18, 2012 at 7:30 PM, Eyal Erez ere...@gmail.com wrote: but then i wrote apt-get update eyal.log and it writes a lot of stuff and then the errors i wrote before, but i dont get a new line until i will press enter.. This command redirects both error stream and output stream to a file, you should see exactly nothing until apt-get quits. Also I didn't notice you were mentioning errors at update phase. Could you please provide exact error messages? then i use midnight Comm in order to copy the file to a place where i can use(copy to windows 8 file system) or using the mail app to send it (i cant reach it using the nokia pc-connectivity or the mass storage.. ) but it seems the file is empty... In mass storage mode /home/user/MyDocs/ gets mounted to your PC. However, when you start X terminal a working directory is /home/user/ So to make it easier for yourself you have two options: 1. Use ssh with USB-networking. AFAIK it didn't work on Windows 7, does Windows 8 has a driver for networking over USB? 2. Execute cd MyDocs before apt-get update eyal.log, then mount phone to PC in Mass storage mode and copy the file. Also consider using Linux for Linux development. It will make your life easier. Thanks, Daniil ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Hi Eyal! Could you please post full output of apt-get update, so we can see what exactly configured and was update successful or not. You can save do it conveniently by saving output to a file: apt-get update my.log Just in case: pwd shows a current working path where file is saved. Thanks, Daniil On Tue, Sep 11, 2012 at 8:19 PM, Eyal Erez ere...@gmail.com wrote: Hello Abubaker, i setup the extras-devel repository by http://wiki.maemo.org/Extras-devel#How_to_activate_Extras-devel , it says only to write fremantle not fremantle-1.3 but i change it anyway and still i get the same error msg. Is there anything else that i can do?? if i will format the machine will it help?? what else can i do? any idea will be apprciate. eyal On Mon, Sep 10, 2012 at 10:44 PM, Abubakar abubak...@gmail.com wrote: Hi Shamsul, are you sure your repo is added properly? I have extras-devel link added to fapman (faster application manager) as follows: Name: extras-devel URL: http://repository.maemo.org/extras-devel/ Distribution: fremantle-1.3 Components: free non-free I do a: ~ $ root and then: orb:~# apt-get install libcv4 and I get the following: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libavcodec52 libavformat52 libavutil49 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 The following NEW packages will be installed: libavcodec52 libavformat52 libavutil49 libcv4 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 0 upgraded, 8 newly installed, 0 to remove and 17 not upgraded. Need to get 5556kB of archives. After this operation, 13.0MB of additional disk space will be used. Do you want to continue [Y/n]? On Mon, Sep 10, 2012 at 11:50 PM, Eyal Erez ere...@gmail.com wrote: Hello Shamsul, Thanks for the resposns. I enable the Extras-devel repository. when i write the apt-get update i get a list of update and then(i started from the last line that is good.. ) Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. and i get the same error, the i mention before about the dependencies... i will add, that i even tried to surf from the N900 to this site go to Fremantle Extras-devel free armel libcv4 2.0.0-5 (both of them) and download and install the .deb file and then i get unable to install 'libcv4'. Incompatible application package. so what else can i do? eyal On Mon, Sep 10, 2012 at 9:30 PM, shamsul hassan shamsulbu...@gmail.comwrote: Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing
Re: OpenCV problem
yes do .. apt-get clean apt-get update On Mon, Sep 17, 2012 at 4:14 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: Hi Eyal! Could you please post full output of apt-get update, so we can see what exactly configured and was update successful or not. You can save do it conveniently by saving output to a file: apt-get update my.log Just in case: pwd shows a current working path where file is saved. Thanks, Daniil On Tue, Sep 11, 2012 at 8:19 PM, Eyal Erez ere...@gmail.com wrote: Hello Abubaker, i setup the extras-devel repository by http://wiki.maemo.org/Extras-devel#How_to_activate_Extras-devel , it says only to write fremantle not fremantle-1.3 but i change it anyway and still i get the same error msg. Is there anything else that i can do?? if i will format the machine will it help?? what else can i do? any idea will be apprciate. eyal On Mon, Sep 10, 2012 at 10:44 PM, Abubakar abubak...@gmail.com wrote: Hi Shamsul, are you sure your repo is added properly? I have extras-devel link added to fapman (faster application manager) as follows: Name: extras-devel URL: http://repository.maemo.org/extras-devel/ Distribution: fremantle-1.3 Components: free non-free I do a: ~ $ root and then: orb:~# apt-get install libcv4 and I get the following: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libavcodec52 libavformat52 libavutil49 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 The following NEW packages will be installed: libavcodec52 libavformat52 libavutil49 libcv4 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 0 upgraded, 8 newly installed, 0 to remove and 17 not upgraded. Need to get 5556kB of archives. After this operation, 13.0MB of additional disk space will be used. Do you want to continue [Y/n]? On Mon, Sep 10, 2012 at 11:50 PM, Eyal Erez ere...@gmail.com wrote: Hello Shamsul, Thanks for the resposns. I enable the Extras-devel repository. when i write the apt-get update i get a list of update and then(i started from the last line that is good.. ) Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. and i get the same error, the i mention before about the dependencies... i will add, that i even tried to surf from the N900 to this site go to Fremantle Extras-devel free armel libcv4 2.0.0-5 (both of them) and download and install the .deb file and then i get unable to install 'libcv4'. Incompatible application package. so what else can i do? eyal On Mon, Sep 10, 2012 at 9:30 PM, shamsul hassan shamsulbu...@gmail.com wrote: Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org
Re: OpenCV problem
sending my email again, the last one got held cuz it exceeded 20k in the body message. Strange. Anyway I wrote: oh :) ... sorry for the misunderstanding since you wrote: Could you please post full output of apt-get update, I was further telling Eyal that do a apt-get clean first and then the update of it, and then paste the logs here. Just wanted him to do a clean first. On Mon, Sep 17, 2012 at 5:00 PM, Daniil Ivanov daniil.iva...@gmail.comwrote: Hi Abubakar, I have to confess I don't really understand your message. According to you previous mail everything is working fine and as expected for you. Thanks, Daniil. ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Hello Abubaker, i setup the extras-devel repository by http://wiki.maemo.org/Extras-devel#How_to_activate_Extras-devel , it says only to write fremantle not fremantle-1.3 but i change it anyway and still i get the same error msg. Is there anything else that i can do?? if i will format the machine will it help?? what else can i do? any idea will be apprciate. eyal On Mon, Sep 10, 2012 at 10:44 PM, Abubakar abubak...@gmail.com wrote: Hi Shamsul, are you sure your repo is added properly? I have extras-devel link added to fapman (faster application manager) as follows: Name: extras-devel URL: http://repository.maemo.org/extras-devel/ Distribution: fremantle-1.3 Components: free non-free I do a: ~ $ root and then: orb:~# apt-get install libcv4 and I get the following: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libavcodec52 libavformat52 libavutil49 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 The following NEW packages will be installed: libavcodec52 libavformat52 libavutil49 libcv4 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 0 upgraded, 8 newly installed, 0 to remove and 17 not upgraded. Need to get 5556kB of archives. After this operation, 13.0MB of additional disk space will be used. Do you want to continue [Y/n]? On Mon, Sep 10, 2012 at 11:50 PM, Eyal Erez ere...@gmail.com wrote: Hello Shamsul, Thanks for the resposns. I enable the Extras-devel repository. when i write the apt-get update i get a list of update and then(i started from the last line that is good.. ) Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. and i get the same error, the i mention before about the dependencies... i will add, that i even tried to surf from the N900 to this site go to Fremantle Extras-devel free armel libcv4 2.0.0-5 (both of them) and download and install the .deb file and then i get unable to install 'libcv4'. Incompatible application package. so what else can i do? eyal On Mon, Sep 10, 2012 at 9:30 PM, shamsul hassan shamsulbu...@gmail.comwrote: Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org
Re: OpenCV problem
Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Hello Shamsul, Thanks for the resposns. I enable the Extras-devel repository. when i write the apt-get update i get a list of update and then(i started from the last line that is good.. ) Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. and i get the same error, the i mention before about the dependencies... i will add, that i even tried to surf from the N900 to this site go to Fremantle Extras-devel free armel libcv4 2.0.0-5 (both of them) and download and install the .deb file and then i get unable to install 'libcv4'. Incompatible application package. so what else can i do? eyal On Mon, Sep 10, 2012 at 9:30 PM, shamsul hassan shamsulbu...@gmail.comwrote: Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: OpenCV problem
Hi Shamsul, are you sure your repo is added properly? I have extras-devel link added to fapman (faster application manager) as follows: Name: extras-devel URL: http://repository.maemo.org/extras-devel/ Distribution: fremantle-1.3 Components: free non-free I do a: ~ $ root and then: orb:~# apt-get install libcv4 and I get the following: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libavcodec52 libavformat52 libavutil49 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 The following NEW packages will be installed: libavcodec52 libavformat52 libavutil49 libcv4 libfaad2-0 libtheora0 libvorbis0a libvorbisenc2 0 upgraded, 8 newly installed, 0 to remove and 17 not upgraded. Need to get 5556kB of archives. After this operation, 13.0MB of additional disk space will be used. Do you want to continue [Y/n]? On Mon, Sep 10, 2012 at 11:50 PM, Eyal Erez ere...@gmail.com wrote: Hello Shamsul, Thanks for the resposns. I enable the Extras-devel repository. when i write the apt-get update i get a list of update and then(i started from the last line that is good.. ) Hit http://repository.maemo.org fremantle/non-free packages W: Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/fremantle/binary-armel/packages404 Not Found [IP:81.218.31.152 80] W:Failed to fetch http://repository.maemo.org/dists/fremantle/sdk/non/binary-armel/packages404 Not Found [IP:81.218.31.152 80] E:Some index files failed to download, they have been ignored, or old ones used instead. and i get the same error, the i mention before about the dependencies... i will add, that i even tried to surf from the N900 to this site go to Fremantle Extras-devel free armel libcv4 2.0.0-5 (both of them) and download and install the .deb file and then i get unable to install 'libcv4'. Incompatible application package. so what else can i do? eyal On Mon, Sep 10, 2012 at 9:30 PM, shamsul hassan shamsulbu...@gmail.comwrote: Hi Eyal, below link will help .. http://maemo.org/packages/view/libcv4/ you need to enable Extras-devel or Extras-testing in the repository manager and then apt-get update Thanks Shamsul On Mon, Sep 10, 2012 at 7:23 PM, Eyal Erez ere...@gmail.com wrote: Hello all, I'm trying to use OpenCV on my Nokia N900, my first goal was to install the libcv4. I tried to use X-Terminal sudo gainroot and then apt-get install libcv4, then i got: Some packages could not be installed. THis may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages ave now yest been created or been moved out of incoming... The following information may help to resolve the situation: The following pakcages have unmet dependencies: libvcv4: Depends:libavcodec52 (=3:0.svn20090303-1) but it is not goint to be installed or (lot of spaces) libavcodec-extra-52 (=3:0.svn20090303-1) but it is not installable Depends:libavformat52 (=3:0.svn20090303-1)but it is not going to be installed or (lot of spaces) libavformat-extra-52 (=3:0.svn20090303-1) but it is not installable E:Broken packages. i tried to install missing lib separte, apt-get install libavcodec52 ---libspeex1 =package libspeex1 is not available, but is referred to by an other package (if this information is important just tell me and i will add the rest of it...) Then i mailed Daniil Ivanov who was very kind and replay with : 1. Enable Extras-Devel repository. 2. apt-get update 3. apt-get intstall libcv4 but i got the same result, so now i pretty much stuck and dont really know what else i can do , so any help will be very appricate. My product info is: Nokia N900 Maemo 5 Version 21.2011.38-1 if any information is needed and missing pls let me know and i will add it, eyal ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
