Richard Gruver wrote:
What do I do if I forgot the admin. password?
Perhaps you didn't see my reply to your earlier post
(http://mail.python.org/pipermail/mailman-users/2006-July/052151.html)
in which I referred you to the FAQ article which answers this question.
--
Mark Sapiro [EMAIL
Hi all,
First posting here
I have a mailman (2.1.8) running on a Debian (testing - etch) box.
Unfortunately I am encountering problems with sending HTML email to the
mailing lists. Mailman seems to alter the email message and add the
original HTML email as an attachment.
I dont want
Today I created several email lists. On all of them, when I send a
message to the list (which I am subscribed to) I get the message with
the correct To: and From: headers, but the Sender; header is set
to [EMAIL PROTECTED] For example if the list is
[EMAIL PROTECTED], Sender: on any received
Everett Johnson sent the message below at 19:07 5/22/2006:
Today I created several email lists. On all of them, when I send a
message to the list (which I am subscribed to) I get the message with
the correct To: and From: headers, but the Sender; header is set
to [EMAIL PROTECTED] For example if
Why is it normal for a bounce processor to be the sender when there are
no bounces? This confuses some list members.
Dragon wrote:
Everett Johnson sent the message below at 19:07 5/22/2006:
Today I created several email lists. On all of them, when I send a
message to the list (which I am
Everett Johnson said the following on 5/22/2006 10:53 PM:
Why is it normal for a bounce processor to be the sender when there are
no bounces? This confuses some list members.
Because, *should the message bounce to a user*... instead of the
original poster getting the bounce notification, the
Hi -
Is it possible to change the subject prefix depending upon the mail
alias used? For example, let's say I have a mailing list named changes
and there are aliases named blue-changes, red-changes and green-changes
that all point to the changes mailing list. Is there a way I could
change the
Amy Tanner wrote:
Is it possible to change the subject prefix depending upon the mail
alias used? For example, let's say I have a mailing list named changes
and there are aliases named blue-changes, red-changes and green-changes
that all point to the changes mailing list. Is there a way I could
Hi all,
I'm running postfix with virtual host and mysql.
I mainly followed the following guide:
http://www.gentoo.org/doc/en/virt-mail-howto.xml
I was wondering if there was any mailman documentation that is more
detailed. I ran through the setup instructions and as far as I can tell.
it's
In this gents case I KNOW of SIX, repeat SIX e-mails accounts he uses. Do I
know the very FIRST letter of the account he uses for his subscription?? No.
So I have to go thru entire ALPHABET [page per letter at a time] to find it
instead of just being able to scroll down a 60 member page.
At 8:57 AM -0700 2006-04-10, Allan Hansen wrote:
Instead of looking up subscribers by address, use their names.
You can also use the Mailman search function, which will work
with partial names and e-mail addresses, either by user part or
domain part. If the comment field in their
On 4/10/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I was wondering if there was any mailman documentation that is more
detailed. I ran through the setup instructions and as far as I can tell.
it's just not doing anything... added the aliases etc. The owner is not
getting notified.. nor
to a list and creates an alias for each
list, my java program could be tweaked to send mail to all alias rather than
a set of email addresses (as it does now).
Thanks,
Luke
From: Mark Sapiro [EMAIL PROTECTED]
To: Luke Shannon [EMAIL PROTECTED],mailman-users@python.org
Subject: Re: [Mailman
Luke Shannon wrote:
Actually it doesn't really need to be in MySQL. As long as Mailman handles
the add and removing of addresses to a list and creates an alias for each
list, my java program could be tweaked to send mail to all alias rather than
a set of email addresses (as it does now).
: Mark Sapiro [EMAIL PROTECTED]
To: Luke Shannon [EMAIL PROTECTED],mailman-users@python.org
Subject: Re: [Mailman-Users] (no subject)
Date: Thu, 16 Feb 2006 11:35:01 -0800
MIME-Version: 1.0
Received: from mail.value.net ([205.208.202.10]) by
bay0-mc10-f6.bay0.hotmail.com with Microsoft SMTPSVC
PROTECTED]
To: Luke Shannon [EMAIL PROTECTED],mailman-users@python.org
Subject: Re: [Mailman-Users] (no subject)
Date: Thu, 16 Feb 2006 13:04:53 -0800
MIME-Version: 1.0
Received: from mail.value.net ([205.208.202.10]) by
bay0-mc6-f3.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Thu, 16
Feb
-users@python.org
Subject: Re: [Mailman-Users] (no subject)
Date: Thu, 16 Feb 2006 13:04:53 -0800
MIME-Version: 1.0
Received: from mail.value.net ([205.208.202.10]) by
bay0-mc6-f3.bay0.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Thu, 16
Feb 2006 13:05:47 -0800
Received: from msapiro
Patrick Bogen wrote in response to Luke Shannon
This all sounds fine. It's trivially easy to add a list of email
addresses to a list (there's a textbox on the admin page that you dump
them into and click a button)
Or you can upload a file through the same mass subscribe interface or
use the
Luke Shannon wrote:
I would like Mailman to only handle subscribing and unsubscribing of users
to our 90 lists which are stored in a mySQL DB. The existing program will
continue send out the mails.
Can this easily be done with Mailman? Will I have to change our database of
users to a
Hello;
We have a set of mailing list we are currently managing with our own
application. There are about 90 lists representing 90 vendors. Vendors hold
events with varying frequency. We give our clients the option to sign up for
a mailing list(s) informing them of upcoming events.
There is an
At 3:05 PM + 2006-02-15, Luke Shannon wrote:
I would like Mailman to only handle subscribing and unsubscribing of users
to our 90 lists which are stored in a mySQL DB. The existing program will
continue send out the mails.
Can this easily be done with Mailman? Will I have to change
unsubscribe
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives:
Greetings, O knowledgeable Mailman users,
This morning, I discovered that mail to some of my list members is bouncing
with the following error message:
Nov 1 14:50:49 integrity postfix/smtp[1526]: 2CA3CAA2A5: to=[EMAIL
PROTECTED], relay=yyy.zzz.com[209.166.195.135], delay=34308,
Is it possible to download the membership list? If so, how?
When I go to my administration panel and select Membership Options I only
see members that are subscribed under the alphabetical heading. I would
like to be able to see the whole list at once. Is this possible?
Coram Deo,
William F.
--
Mailman-Users mailing list
Mailman-Users@python.org
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
Hi
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that problem
I hope someone can help me.
system
suse linux 9.0
postfix 2.0.14
apache 2
Julian Ohm
--
Julian Ohm wrote:
Hi
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that problem
I hope someone can help me.
system
suse linux 9.0
postfix 2.0.14
apache 2
I had the same problem a few months ago, it still
Julian Ohm wrote:
Hi
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that problem
I hope someone can help me.
system
suse linux 9.0
postfix 2.0.14
apache 2
Julian Ohm
Julien Francoz CoCoZ wrote:
Julian Ohm wrote:
Hi
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that problem
I hope someone can help me.
system
suse linux 9.0
postfix 2.0.14
apache 2
I had the same
At 9:42 AM +0200 2005-07-12, Julian Ohm wrote:
also the reply header is not cleared. I can do what i want. the mail
reply is always to sender. not to list. It seems that some functions
don't work as they should
That sounds like a problem with your MUA, not Mailman. Have you
Brad Knowles wrote:
At 9:42 AM +0200 2005-07-12, Julian Ohm wrote:
also the reply header is not cleared. I can do what i want. the mail
reply is always to sender. not to list. It seems that some functions
don't work as they should
That sounds like a problem with your MUA, not
On Jul 12, 2005, at 15:52, Julian Ohm wrote:
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that
problem
Did you set DELIVERY_MODULE to 'Sendmail' in your mm_cfg.py (rather
than the *strongly* recommended
Jim Tittsler wrote:
On Jul 12, 2005, at 15:52, Julian Ohm wrote:
I'm using Mailman 2.1.6 and have a problem with the subject prefix.
mailman doesent change the subject and i'm not able to fix that problem
Did you set DELIVERY_MODULE to 'Sendmail' in your mm_cfg.py (rather
than the
On Jul 12, 2005, at 18:43, Julian Ohm wrote:
Jim Tittsler wrote:
Did you set DELIVERY_MODULE to 'Sendmail' in your mm_cfg.py (rather
than the *strongly* recommended 'SMTPDirect')? The Subject prefix is
not added when using the 'Sendmail' module.
Sorry, this is bogus. (It is the
Hi,
Strange. At least the prefix '[dept-linux/pedago]' works at my test
site. What is your version of Python and what is your list language
settings?
I may be able to look into the problem if you can send me the copy of
original post message.
I don't have access to the server for now
mailman setup and working with postfix just fine, except for the
archives..!?!
I get a 404 error for the archives. anyone with any ideas?
-william
--
Mailman-Users mailing list
Mailman-Users@python.org
William Wood said:
mailman setup and working with postfix just fine, except for the
archives..!?!
I get a 404 error for the archives. anyone with any ideas?
Well it sounds to me like the archives don't exist. Are you sure that
you have Mailman creating them? If they do exist (just not in the
Hi all,
mailman: 2.1.5 python: 2.2.3
This problem apparently started on monday, the 16th.. several of the mailing
lists on my system appeared to simply stop processing all messages except admin
requests. New users could subscribe to the lists but no actual list traffic
was possible, no bounce
I am using the provided code to send my form information to me Mailman
list.(subscriptions) you can view this page and code at
www.friendsofcaritas.com/MailLists.htm.
I would like to cc: all the form information (name, address, etc.) to
another email, or better yet, create a comma-delimited
On Apr 16, 2005, at 03:25, Jess Mooers wrote:
I have a list called New_Listing and it is for a client of mine called
CIREX. I have modified the Prefix for subject line of list
postings. to prepend [CIREX] to the subject. However, I have noticed
that the [CIREX] is not prepended for the
Hi all,
I have a list called New_Listing and it is for a client of mine called CIREX.
I have modified the Prefix for subject line of list postings. to prepend
[CIREX] to the subject. However, I have noticed that the [CIREX] is not
prepended for the Welcome message or any subscription
Good day.
I am having a problem with Mailman v 2.1.2
The problem is that every mail sent form the mailing list doubles
and the subscribers ends up receiving 2 mails in stead of one.
Does anybody know what causes this, and what I can do to fix it?
Regards
Reuben Meyer
Email: [EMAIL PROTECTED]
Hi everyone;
Perhaps this issue might actually be somewhat more a html question more
than mailman issue. Since mailman allows topics to be used, it makes
sense to me that it fits here though.
Id like to have someone click a link to send an email (that has a
specific topic) and have the
Don wrote:
Id like to have someone click a link to send an email (that has a
specific topic) and have the email program insert the subject directly
into the subject line of the email as it also inserts the send to email
address for that list.
I'm sure there must be a way to do that directly
Hello,
Would have a code HTML so that the users can incrir themselves directly
on the site. See the first page of my site on http://www.handichat.ch.
My shelterer (swisscenter) places your mailing list at the disposal of
his customers.
Thank you and better greetings.
Christophe Dessiex
Hi,
I've been using Mail Man for a year or so now and all of a sudden I have
stopped receiving notification of new subscription requests, Anyone have any
ideas?
Thanks!
-
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
To whom it may concern
I'm at the time to develop my own web site. In my control panel provided by
my hosting company, i see the mailling list option and they told me that
mailman is the supplier of this mailing list.
I would have some questions as am not used to web site language.
1- Is a
Jean-François Roberge wrote:
To whom it may concern
I'm at the time to develop my own web site. In my control panel provided by
my hosting company, i see the mailling list option and they told me that
mailman is the supplier of this mailing list.
Would that be cPanel? If so, or even if not, see
On Fri, 14 Jan 2005 13:45:25 -0500, Jean-François Roberge
[EMAIL PROTECTED] wrote:
3- Is there a script to install orjust by creating the mailling every thing
is all ready and all i need is to put the subscribing page on my site?
4- HOw do you i put the subscribing page in my site?
If, as
Hi,
I have verified this problem in mailman versions 2.1.2 and 2.1.5. The
problem seems to be that the second and subsequent lines of a long
header are indented when they are folded onto new lines. From my basic
testing, the isseu seems to be related to the presence of the indents,
rather
Miles Waller wrote:
I have verified this problem in mailman versions 2.1.2 and 2.1.5. The
problem seems to be that the second and subsequent lines of a long
header are indented when they are folded onto new lines. From my basic
testing, the isseu seems to be related to the presence of the
I'm almost there!!! My Mailman server is sending out confirmation
emails, but the reply address is being bounced by my SMTP server. I'm
assuming that the alias list that was generated when I first created
the Mailman list needs to be installed, but I'm not sure where to paste
that
Brent Shafer wrote:
I'm almost there!!! My Mailman server is sending out confirmation
emails, but the reply address is being bounced by my SMTP server. I'm
assuming that the alias list that was generated when I first created
the Mailman list needs to be installed, but I'm not sure where to
ԣǠ?ч ȇ 㤠ϔ㤭Ͽ
-
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Michael Schmidt wrote:
i have some trouble to setup mailman on my server. My Server is from german
hoster Strato and is running with Suse Linux, Postfix and Apache. I have
installed the mailman software, and i can also setup the first maillist
mailman. The only error i get is, when i want to use
Hi,
i have some trouble to setup mailman on my server. My Server is from german
hoster Strato and is running with Suse Linux, Postfix and Apache. I have
installed the mailman software, and i can also setup the first maillist
mailman. The only error i get is, when i want to use the web-interface.
aghaa in javabaa chiye midin
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives:
I changed my servername after installing the latest Mailman. I ran a
script in mailman/bin that changed all the servername references and
Mailman has been working fine. Accept for one thing: on the listinfo
pages, the archives link points to the old server name. The variable
that controls this
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable Archives: http://www.mail-archive.com/mailman-users%40python.org/
forget this post, after send the email i did one more search and found
my answer.
thanks mailman you have a great system.
andy morris
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman
I was wondering if anyone knew a way to send an invitation email to an
address using only an email program? I would like to be able to send an
email to one of the program's addresses so that it invites a user to join
the list. I was thinking that there should be a way to email
[EMAIL PROTECTED]
At 7:14 PM -0500 2004-07-16, Pat Riehecky wrote:
I was wondering if anyone knew a way to send an invitation email to an
address using only an email program? I would like to be able to send an
email to one of the program's addresses so that it invites a user to join
the list. I was thinking
I am not exactly sure how this faq applies, I should have been clearer
in my request I can email the list easily enough, what I am looking
for is a way to modify subscriptions to the list (either add or remove
users) from an email only interface. For example, listproc has a command
you can
wonderful-you acted on it.
-Original Message-
From: Pat Riehecky [mailto:[EMAIL PROTECTED]
Sent: Friday, July 16, 2004 8:37 PM
To: Brad Knowles
Cc: [EMAIL PROTECTED]
Subject: Re: [Mailman-Users] (no subject)
I am not exactly sure how this faq applies, I should have been clearer
in my
At 4:15 PM +0500 2004/05/28, mehmood hasan wrote:
KeyError: getgrnam(): name not found
If you search the archives for this string, you quickly come up
with
http://mail.python.org/pipermail/mailman-users/2003-June/029911.html.
--
Brad Knowles, [EMAIL PROTECTED]
They that can give up essential
I configured the mailman using rpm mailman-2.1-8.i386.rpm
and I found following problems
[EMAIL PROTECTED] mailman]# service mailman restart
Traceback (most recent call last):
File /var/mailman/bin/mailmanctl, line 524, in ?
main()
File /var/mailman/bin/mailmanctl, line 319, in main
Has anyone thought of numbering the attachments so they match the topic list ?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable
Has anyone thought of numbering the attachments so they match the topic list ?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable
At 1:20 PM -0400 2004/05/27, PC Specialties Inc wrote:
Has anyone thought of numbering the attachments so they match the
topic list ?
In what way?
--
Brad Knowles, [EMAIL PROTECTED]
They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor
Hi all
In the Instructions put out by
Sasa
it says to put the below in the
/usr/local/mailman/Mailman/mm-cfg.py
DEFAULT_EMAIL_HOST = 'list.jones.org'
DEFAULT_URL_HOST = 'list.jones.org'
My question is what do you do if you have several
domains that will run a mailing list?
Put them all
Hello,
My question is, how mailman work´s? When i send a mail to the list - how
many email´s are sent form the list to the receipt´s?
For example: 100 list members - is there sent one email to all members or
an email to every member?
i hope everybody understand my question because my english is
On 16 May 2004, at 11:40, [EMAIL PROTECTED] wrote:
Hello,
My question is, how mailman work´s? When i send a mail to the list -
how
many email´s are sent form the list to the receipt´s?
For example: 100 list members - is there sent one email to all
members or
an email to every member?
Referring
Is there a way to mass remove members that are flagged as excessive bounces?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.python.org/cgi-bin/faqw-mm.py
Searchable
On May 8, 2004, at 17:41, Sean Carnahan wrote:
Is there a way to mass remove members that are flagged as excessive
bounces?
You can get a list of members whose subscriptions to 'mylist' have been
disabled by bounces using
'bin/list_members --nomail=bybounce mylist'
and you can unsubscribe
Hello all. I am having some problems with a mailman list I am trying to
setup.
First let me tell you my configuration:
Xserve G4 10.3 Server
Mailman 2.1.2 (os x package-part of the server)
Everything is up to date - all patches and updates
What the people who want the list setup
hi,
is there a way to adjust the subject line dynamically...
what i'd like to do:
when mailman gets a mail for a given mailing list,
it checks the subject line, and if it's #,
then replaces it with #current-week...
that means it replaces it with something like #`date +%W`.
is there a way to
Hi there,
Do you have an easy way to install mailman on a server? I don't know anything about
unex.
Dan Scott
http://appad.org/
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
On Apr 10, 2004, at 3:19 PM, Dave C. wrote:
# better tools for the membership management page. i.e. divide chunks
alphabetically, and add a search for member by regexp field. (Done)
While this is fantastic to have be what is displayed by detault, what
seems to have been forgotten, is:
Provide a
LuKreme wrote:
Chunks of 100 would be infinitely more useful than chunks by
initial letter.
It's in the FAQ:
http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq04.030.htp
You must have root access to the server to do this. This also appears to
only apply to new lists, for existing
On Apr 11, 2004, at 12:25 PM, texas critter wrote:
LuKreme wrote:
Chunks of 100 would be infinitely more useful than chunks by
initial letter.
It's in the FAQ:
http://www.python.org/cgi-bin/faqw-mm.py?req=showfile=faq04.030.htp
You must have root access to the server to do this. This also appears
LuKreme wrote:
Well, the default is 30 and mm does NOT show 30 on every
single page. It shows 30 on a particualr letter page. That is
to say:
Once the total membership surpasses the chunk size, it switches to the
alphabet links. You could set the default chunksize to 100 and any list
with
I couldnt figure out how to post this in the 'Wiki', so Im sending it
here.
Hello, I came across this on the TODO list for Mailman 2.1:
# better tools for the membership management page. i.e. divide chunks
alphabetically, and add a search for member by regexp field. (Done)
While this
Please not send any more e-mails to [EMAIL PROTECTED]
I am not able to answer any questions or
respond
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ:
--
Thomas Waters
Director of Information and Communication Services
University of Pittsburgh, School of Pharmacy
[EMAIL PROTECTED]
http://www.pharmacy.pitt.edu
--
Mailman-Users mailing list
[EMAIL PROTECTED]
Hi,
I am not sure what setting to change to fix this issue. Our e-mail
attachments are not going through when I e-mail the list.
Thanks,
Josh
--
Mailman-Users mailing list
[EMAIL PROTECTED]
Hi everybody !
I'm Mauricio from Brazil and I use the mailman to create mailling list.
But I have a little problem. I have created a lot of mail list , but in this moment I
forgot the password of one of them.
How can I change the password of this list ?
Ps. I don't have the password of this list
Hi,
I am having trouble sending e-mail to my mailing list...I created a list and
I have been using it for about 6 months, but all of a sudden, when I e-mail a
post...it just disappears and doesn't even appear on the moderator's page.
Please let me know,
Vin
www.the-voice.us
newcomers on the
hackerscene
mrtg.grunn.org Dutch mirror of MRTG
-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
[EMAIL PROTECTED]
Verzonden: woensdag 11 februari 2004 7:34
Aan: [EMAIL PROTECTED]
Onderwerp: [Mailman-Users] (no subject)
Hi,
I am having trouble sending
remove
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/
--
Mailman-Users mailing list
[EMAIL PROTECTED]
__
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/
--
Mailman-Users mailing list
[EMAIL PROTECTED]
We currently have a newsletter which we manage through Outlook Express. We are hoping
to find a list server who will make managing our lists much easier. We do not need
all the features. Our only purpose is to send an email which then disperses that
email to everyone on our list.
These are
Hi,
I am getting an error about a stale master qlock and it is
asking me to run mailmanctl -s. When I try and do this I get command
not found and then -bash. I am running Panther os x 10.3.2. My
permissions also keep going screwy. I run the Apple permissions
checker, but I can't run the
At 9:32 AM -0600 2004/01/23, Homestead Harvest wrote:
These are the features which we will need:
1.. When a visitor enters their email address in our newsletter box,
that address is sent to our list and automatically entered.
Newsletter box? How is that different from the mailing list?
: [EMAIL PROTECTED]
Subject: Re: [Mailman-Users] (no subject)
At 9:32 AM -0600 2004/01/23, Homestead Harvest wrote:
These are the features which we will need:
1.. When a visitor enters their email address in our newsletter box,
that address is sent to our list and automatically entered
When a person subscribes to my newsletter, will their address be automatically added
to my mail list? Or do I have to manually put it in?
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
* Marie Dean [EMAIL PROTECTED]:
When a person subscribes to my newsletter, will their address be
automatically added to my mail list?
Obviously. That's the whole point, isn't it?
--
Ralf Hildebrandt (Im Auftrag des Referat V a) [EMAIL PROTECTED]
Charite - Universitätsmedizin Berlin
Marie Dean schrieb:
When a person subscribes to my newsletter, will their address be
automatically added to my mail list? Or do I have to manually put it
in?
If your newsletter is the same thing you call your mail list (i.e.
a Mailman mailing list): yes, of course.
If not, you'll have to
Hello Sir / Miss
I'm a Dutch guy and I have my own site for 3 months now. I want to make
a news letter each month and send it to people who subscribed for it.
My question is: Is this possible with Mailman. If yes are there any
tutorials about how to do this. Because I have made a mail list on my
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 24 Dec 2003 01:02:21 +0100
Kjell [EMAIL PROTECTED] wrote:
Hello Sir / Miss
I'm a Dutch guy and I have my own site for 3 months now. I want to
make a news letter each month and send it to people who subscribed for
it. My question is: Is
We have around 30 mail id for our employees, One administrator Mail is also there, We
want that whenever any mail goes out or comes in from any mailbox, the administrator
should get a copy of same to keep track of all the records of office data. Can you
suggest the steps to do the same
101 - 200 of 343 matches
Mail list logo
