Did a bit more playing around.
I've figured out that there are three subroutines to the qmail-to-mailman.py
script.
The first checks for certain addresses and sends it to qmail-inject if
they're present,
The second strips out information from the part of the header that contains
"mailman" (if pr
When I create a new list the password is mailed to the list owner. I can't
seem to find where to disable this globally without modifying each
template. I can see templates for each language
which specify this setting, i.e. the english tempate says
The mailing list `%(listname)s' has just been
Bill Moseley wrote:
>This has got to be a FAQ or a previous post but "delete" and "archive"
>are not the best search terms...
Actually, they both get the relevant article as does "remove"; they
just get too many others as well.
The article you want is 3.3.
>Someone sent a message to the list th
On Wed, 2004-10-06 at 23:31 -0400, Evan Prodromou wrote:
> > There are various problems with umbrella lists [...]
> Are these logged as bugs? Is anyone working on fixing them?
I just checked, and apparently the problems with umbrella lists aren't
logged as bugs. I've added two bugs to SourceForg
Carl Fairweather wrote:
>
>I am using your Mailmain service as a newsletter/announcement facility. I
>have checked the FAQ page
>http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.011.htp which
>talks about customising the welcome messages txt page so that subscribers
>don¹t get informed
On Wed, 2004-10-06 at 20:28 -0700, Mark Sapiro wrote:
> There are various problems with umbrella lists such as members of list1
> or list2 can't post to list3 unless non-members can post (but Jim
> Tittsler's patch referenced above can help with this). Also, members
> of both list1 and list2 will
Evan Prodromou wrote:
>On Mon, 2004-10-04 at 13:22 -0400, Mauricio Tavares wrote:
>
>> Let's say I have 3 lists, list1, list2, and list3. Now I would
>> like to have the subscribers of list 3 to be those of list1 + list2. So,
>> when the list of subscribers in, say, list2 changes, list3 is
>> aut
Sheila Hoffman wrote:
>I just installed MM via my cpanel and have spent the afternoon exploring
>all the options. When I subscribed myself to my new list I got an email
>and the subject line said confirm and included all the nubmers needed to
>confirm. I'd like to make that subject line a little m
With respect to mailman bounces, my mailman configuration turns on VERP
which customizes (to a degree) message delivery addresses so that
mailman can better identify bounces. The config contains the following
lines (which include a couple of options I'm not using):
VERP_PASSWORD_REMINDERS = Yes
V
I am currently experiencing a very slow delivery of email from mailman to
our smart relay server. The job of mailman in our system is to accept the
list message expand it and inject it directly back to our mail router for it
to decide where the messages are to go. At no time will the mailman server
On 10/3/2004 20:10, "Liyah" <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I use mailman for database subscriptions on my site..www.liyahlandon.com
> however, I have tried to enter 2 other email addresses (to test it) and it
> says 'You must enter a valid email address' I know these other 2 emails ARE
> v
I just installed MM via my cpanel and have spent the afternoon exploring
all the options. When I subscribed myself to my new list I got an email
and the subject line said confirm and included all the nubmers needed to
confirm. I'd like to make that subject line a little more user friendly.
It also
Hi,
Aaron The Young wrote:
Hey all,
I'm running Solaris 2.8 and python 2.3.3 and my configure of mailman
2.1.5 goes swell, but when I attempt to
compile, I get the following during my compile:
make[1]: Entering directory `/nn/local/src/mailman-2.1.5/messages'
Merging new template file with existi
On Wed, Oct 06, 2004 at 09:03:50AM -0400, [EMAIL PROTECTED] wrote:
> When going to the administration page for a list, is it possible to put a
> password in the URL rather than typing it into a dialog box?
>
> I have tried
> http://MyDomain.com/mailman/admin/ListName_MyDomain.com?MyPassword
For *
On Wed, Oct 06, 2004 at 10:02:48AM -0700, Robert Haack wrote:
> Ok, I got the patch and applied it and I checked the source files and
> the patches are applied. Then I tried it out and it didn't work so it
> dawned on me that I need to compile it first. I've tried to compile it
> but I get the
Hello,
I have had a problem with my list since mid September and It hasn't been solved.
I have a website www.dancecentral.com.au that is hosted by www.nomonthlyfees.com , and
everything is set up for me to create and edit a mailing list using an interface
through a browser. So that means I did n
On Mon, 2004-10-04 at 13:22 -0400, Mauricio Tavares wrote:
> Let's say I have 3 lists, list1, list2, and list3. Now I would
> like to have the subscribers of list 3 to be those of list1 + list2. So,
> when the list of subscribers in, say, list2 changes, list3 is
> automagically updated. Is there
Greetings,
I installed Mailman 2.1.5 on a new server and have been fighting with it for
a few days and wondering if someone can point me in the right direction to
look at as far as figuring .
I have a working installation of 2.1.4 on another server that has been
retired, however it's inaccessible
> Please give me a run down of features available to me.
Ashley Garner Mainka
http://www.list.org/features.html
Also /usr/share/doc/mailman
- John
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailma
We use this mailing list and I noticed that it is very different now. How do I access
the subscribers and am I now able to send html email to my subscribers? Please give me
a run down of features available to me.
Many thanks
Ashley Garner Mainka
Vice President
The Southern Designer, LLC
www.sou
Hi,
I use mailman for database subscriptions on my site..www.liyahlandon.com
however, I have tried to enter 2 other email addresses (to test it) and it
says 'You must enter a valid email address' I know these other 2 emails ARE
valid. Could you please tell me how to fix this so it will record th
Hey all,
I'm running Solaris 2.8 and python 2.3.3 and my configure of mailman 2.1.5
goes swell, but when I attempt to
compile, I get the following during my compile:
gcc -I. -DMAIL_GROUP="\"mailman\"" -g -O2 -g -O2 -DPACKAGE_NAME=\"\"
-DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRIN
Hey all,
I'm running Solaris 2.8 and python 2.3.3 and my configure of mailman
2.1.5 goes swell, but when I attempt to
compile, I get the following:
gcc -I. -DMAIL_GROUP="\"mailman\"" -g -O2 -g -O2 -DPACKAGE_NAME=\"\"
-DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
-DPACKAGE_
Hello there,
I am using your Mailmain service as a newsletter/announcement facility. I
have checked the FAQ page
http://www.python.org/cgi-bin/faqw-mm.py?req=show&file=faq03.011.htp which
talks about customising the welcome messages txt page so that subscribers
don¹t get informed of posting and pa
I tried to find an answer to my question by joining your "Listowners" list
but when I click on the link in
http://www.gnu.org/software/mailman/lists.html, I get a page not found so I
was unable to join the list, so here is my question"
When going to the administration page for a list, is it possib
Let's say I have 3 lists, list1, list2, and list3. Now I would
like to have the subscribers of list 3 to be those of list1 + list2. So,
when the list of subscribers in, say, list2 changes, list3 is
automagically updated. Is there a way to do that? I looked into what was
suggested on the
"JL Reis" schrieb:
> It seems that hotmail users, comcast.net
> users and some AOLers are having their email either directly deposited into
> a junk folder or they're being tossed as spam before they even reach the
> users inbox (as I suspect is the case with Comcast).
That is a problem with the
Thanks for the patch this should help out greatly.
Ok, I got the patch and applied it and I checked the source files and
the patches are applied. Then I tried it out and it didn't work so it
dawned on me that I need to compile it first. I've tried to compile it
but I get the following error:
This has got to be a FAQ or a previous post but "delete" and "archive"
are not the best search terms...
Someone sent a message to the list that they now want removed from the
archive.
I went in an manually edited the message from:
private/.mbox
private//2004-October.txt
private//2004
rob.exley wrote:
>
>On Tue, 2004-10-05 at 16:46, Mark Sapiro wrote:
>> Rob.Exley wrote:
>> >
>> >Even though I have modified /var/mailman/Mailman/mm_cfg.py to change
>> >DEFAULT_EMAIL_HOST to be 'lists.ntg.equifax.com'. I have also modified the
>> >'Host name this list prefres for email' in the web
Hello all,
I'm managing a mailing list (obviously) and the problem we're having is
with the list address being placed in the "CC" header of the email.
This is an annoucement only list, so we'd like to simply remove that
feature for this specific list. Is there a way of doing that? We don't
wa
On Tue, 2004-10-05 at 16:46, Mark Sapiro wrote:
> Rob.Exley wrote:
> >
> >Even though I have modified /var/mailman/Mailman/mm_cfg.py to change
> >DEFAULT_EMAIL_HOST to be 'lists.ntg.equifax.com'. I have also modified the
> >'Host name this list prefres for email' in the web interface for my test
>
DELIVERY_MODULE = 'SMTPDirect'
There is no SMTP_HOST or SMTP_PORT defined.
-Layne
On Oct 5, 2004, at 4:33 PM, John Dennis wrote:
Looks like you're getting smtp connection failures. What is your
DELIVERY_MODULE set to? What is your SMTP_HOST and SMTP_PORT set to?
Can
you telnet to these? Does your
:: -Original Message-
:: From: Mark Sapiro
:: As a possibly interesting data point in this thread, I have a Mailman
:: 2.1.4 list with 303 members, 14 of which are @hotmail.com, 26 of which
:: are @comcast.net and 24 of which are @aol.com.
::
:: Except for AOL bouncing non-digest mess
On Tue, Oct 05, 2004 at 01:21:26PM -0700, brandon dudley wrote:
> OS: SUSE 9.1 (i386)
> version: mailman-2.1.4-83.3 (SUSE's numbering)
>
> run manually:
> [EMAIL PROTECTED]:/usr/lib/mailman/scripts> /usr/lib/mailman/mail/mailman post
> Cannot read wrapper configuration file.
>
> logged error msg:
Hello all,
I have a fbsd box and I have been running mailman-2.1.3 sinces its
release. No major problems but I have moved my box nd it was time to
get a few of the new features and benefits that 2.1.5 offers.
Environment is
FREEBSD 5.1-RELEASE
Apache 1.3.29
Python 2.3.2
Sendmail is my MTA
Again
36 matches
Mail list logo