Hi,
thanks for all the answers.
I've checked out the following request:
Hi,
You can only control your own WMS, not the one which you are chaining.
Try contact them and negotiate if they are willing to serve bigger
images. Don't be surprised if they don't.
-Jukka Rahkonen-
Basti2025 wrote:
Hi,
thanks for all the answers.
I've checked out the following
Hi,
Could you explain what request do you mean and where did you capture it? How
are you creating the requests that you send for your own WMS? Is is some
application that has a print option?
The request chain goes this way:
- You send (or your application sends) a WMS request for your own
Hi Bastian,
set MAXSIZE to 1, that's all you need. SIZE is not relevant in
this context. Maxsize defines the maximum pixel count off the bigger
edge of an image mapserver will create. If one edge is requested
bigger (in your case maxsize is set to 2048, but your getmap has
height=2496) you
Hallo list,
I don't believe this will get you the desired effect. You'll get the
lines but you'll also get the line end caps.
Yes, this was the problem
thanks, but unfortunately the rendering of bridges are not
configured there.
OK, but you would do bridges similar to tunnels. So look
Hi Jukka,
At first, I´m using Mapbender, who created the request to my mapserver.
In the mapfile is a connection to another wms.
- I have to go this way, because the legend of the external wms is
really bad
I know that the external wms accept a size not bigger then 2048.
And when I change
On 4-2-2010 12:04, tommasodb wrote:
The trick was SYMBOL SIMPLE, which is not really documented on the
official docu (http://mapserver.org/mapfile/symbol.html):
/lists.osgeo.org/mailman/listinfo/mapserver-users
Neither is DATARANGE and friends, at least not in the official MapFile
Hi,
Looks like the question is about how to configure Mapbender because it is the
one that sends the requests. Unfortunately I cannot help you with it. For sure
there is pease of code that defines the printout extents.
You will see the effect of MAXSIZE if you change it to 500 and repeat the
Hi,
At first thank you for all.
I know that mapbender multiplicate WIDTH and HEIGHT with factor 4.
I will try to change these parameters in the javascript file and hope that
works.
If I know a workaround I will also post it here.
@Michael
Sorry that i didn´t answered. I tried your way and
Ok, that works.
I changed the get Width and get Heightparameter in the file
mod_printPDF_pdf.php near line 170 from 4 to 3.
Now my request look like this
SRS=EPSG:31467BBOX=3484700,5898490,3486390,5900860.948905109
WIDTH=1335HEIGHT=1872
Hi,
We are having a arcgis tile cache layer but also need to have static images
with a given bounding box, not limited by the tiling scheme, but making it
available as a wms. Is it possible to use mapserver as a tile cache client,
or can you suggest other solutions?
Thanks,
John
Hi Bastian,
sorry, I forgot that the problem is a remote wms layer... maybe switch
to the mapbender users lists
...
Ok, glad you solved the problem, there is also the overview section in
the mod_printpdf_pdf.php around line 195, that would also need this
adjustment. The resulting resolution
All,
Just to mix it up a little, what about doing a half and half approach.
MapServer could generate something simpler (the data basics from a data read on
the fly, and return a simple ramping config file, which could be used to pass
back as a file for the custom aspects.
Just having
Hi Tim,
with Georaptor I could draw all the point from the table without any
error messages. But if I use the geom-validator, I get an error
ORA-13000: dimension number is out of range. After I corrected the
dimension number, the error message from the UMN disappeared.
Thank you!
Stefan
John,
yes it's possible see:
http://www.gdal.org/frmt_wms.html
Best regards,
Bart
Hi,
We are having a arcgis tile cache layer but also need to have static
images
with a given bounding box, not limited by the tiling scheme, but making it
available as a wms. Is it possible to use mapserver
Jan Hartmann wrote:
On 4-2-2010 12:04, tommasodb wrote:
The trick was SYMBOL SIMPLE, which is not really documented on the
official docu (http://mapserver.org/mapfile/symbol.html):
/lists.osgeo.org/mailman/listinfo/mapserver-users
Neither is DATARANGE and friends, at least not in the
On 02/02/2010 11:32 AM, Jon Miner wrote:
Now, I'm trying to layer on information from the GRANIT website:
http://www.granit.unh.edu/
ftp://ftp.granit.sr.unh.edu/pub/GRANIT_Data/Vector_Data/Transportation_Networks/d-railroads/rrnh.e00
These files are e00 files. Based on some other mailing
David Alda Fernandez de Lezea wrote:
I've got another raster file that I CAN access from my WMS an it's located in a
mapped unit:
DATA \\iktfs1\Estatica$\ORTOFOTOS\Euskadi_2006_rgb_25cm_ed50.ecw
It's weird isn't it?? I guess it could be something related to the named units
or something like
You're always mixing things up aren't you...
I don't think you need a special mode. This strikes me as just another special
form of template output based on a query. Presently you can get layer level
query data (e.g. number of results) and of course spatial and non-spatial
attributes for
February 4, 2010
The PostGIS development team has, after a long course of reflection
and a detailed self-examination of our various personal failings,
decided to release PostGIS 1.5.0 to the public.
http://postgis.org/download/postgis-1.5.0.tar.gz
This new version of PostGIS includes a new
To build on what Steve is saying it might help to think of features in
mapserver as requiring two separate components:
1) the algorithm
2) the presentation
Obviously you can not present something that you do not have. the
algorithm is how you generate stuff. Once we have stuff we need to
Steve,
I thought about the template process, and this would likely work with
the first pass, where MapServer does a basic or simple version of a set
of settings after looking at the datasource,
Using the preconceived STAT string seems limiting as far as user
interaction. If all the setting
Congratulations Paul and team. Just a question: what are the
plans/status for topology under PostGIS?
http://trac.osgeo.org/postgis/wiki/UsersWikiPostgisTopology
Jan
On 04-Feb-10 19:16, Paul Ramsey wrote:
February 4, 2010
The PostGIS development team has, after a long course of reflection
23 matches
Mail list logo
