Re: [MBZ] How to remedy my heating problem - W123 300TDt

I wasn't talking to you. Go back to watching fakenews. On Fri, Dec 30, 2016 at 10:54 PM, Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > SO order a monovalve insert from the classic center and quit whining. Put > it in! You've been told the solution about 30 times. > > Andrew

Re: [MBZ] w124 door seal glue

The 3m stuff is not a spray can, that is #77 in the spray can. Nothing in my prior post said anything about #77 spray adhesive. It is not "contact cement" but is similar, but way stronger. Andrew Strasfogel December 30, 2016 at 9:53 PM You don't want a spray

Re: [MBZ] How to remedy my heating problem - W123 300TDt

SO order a monovalve insert from the classic center and quit whining. Put it in! You've been told the solution about 30 times. Andrew Strasfogel via Mercedes December 30, 2016 at 9:48 PM FMiser wrote : *I'd unplug the electrical connector on the monovalve

Re: [MBZ] w124 door seal glue

You don't want a spray can. You need to brush it on. MB used to make some contact cement in acute can with a built in brush applicator. On Fri, Dec 30, 2016 at 10:51 PM, Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > Go to FLAPS. Get 3 M door seal and weather strip adhesive or

Re: [MBZ] Last Moose Day of 2016

Always open season if you are hunting with a vehicle. (won't thrill your insco) Andrew Strasfogel via Mercedes December 30, 2016 at 9:39 PM I Wonder if they are open season. ___ http://www.okiebenz.com To search list

Re: [MBZ] Badges

I'll trade you even up if you send me 10 positive reviews from diesel lovers or liberals, plus a few photos.. On Fri, Dec 30, 2016 at 10:47 PM, Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > Ach! too bad I did not know about this deprivation sooner. I'd have > brung ya a jar of

Re: [MBZ] w124 door seal glue

Go to FLAPS. Get 3 M door seal and weather strip adhesive or some such name. They will know what it is. Maybe it is trim and weatherstrip adhesive... something along those lines. Dan the 3M man probably knows the proper name. Karl Wittnebel via Mercedes

Re: [MBZ] w124 door seal glue

I would brush on yellow contact cement onto the gasket and frame, wait 15 minutes until the surfaces are glossy, then carefully press into place. Be sure you've removed all the old gasket residue. On Fri, Dec 30, 2016 at 10:34 PM, Karl Wittnebel via Mercedes < mercedes@okiebenz.com> wrote: >

Re: [MBZ] How to remedy my heating problem - W123 300TDt

FMiser wrote : *I'd unplug the electrical connector on the monovalve and go for a drive. That is the full heat setting. If there is still no heat, it has to be the monovalve or the coolant flow. If there is heat - then it's the controller.* I was with you until you referred to the

Re: [MBZ] Badges

Ach! too bad I did not know about this deprivation sooner. I'd have brung ya a jar of real "estate grown" and homemade apricot jam Beats the sox off cat poop jelly hands down and 10x over. Well maybe another time... MG via Mercedes December 30, 2016

Re: [MBZ] Badges

You'll probably need a magnifying lens to spot the stray fleck of pepper. The very worst is Trader Joe's - sickly sweet, artifically colored, and devoid of heat or flavor. On Fri, Dec 30, 2016 at 9:50 PM, wrote: > Dang! Now I have to go and buy some of that artisanal

Re: [MBZ] Last Moose Day of 2016

I Wonder if they are open season. On Fri, Dec 30, 2016 at 6:48 PM, clay via Mercedes wrote: > http://www.ktuu.com/content/news/Wednesday-Evening-Weather-KTUU-12-28-16- > 408575105.html > > > --- > clay > > > I turned my computer upside down and shook it, but the bookmark

[MBZ] w124 door seal glue

Anybody put new door seals on a 124? I have all new wagon seals in a box, but apparently it's a glue-on affair. I don't know what sort of glue to use. Thanks for any tips. Karl On Dec 30, 2016 6:53 PM, "MG via Mercedes" wrote: How much did Darvin want for it? Kyle

Re: [MBZ] W124 Wagon

It's all about the condition as usual, but yah a 124 diesel Wagon with later fenders and hood is a nice machine. Add a 606, intercooler, the pump and two turbos and you have something pretty scary. Incidentally one of the Swedish shops is now making elements for the mw from the 617, or you can

Re: [MBZ] Badges

Dang! Now I have to go and buy some of that artisanal jelly down at my local Hitchcock's Supermarket. I hate that. They put it in those cute little Mason jars. Andrew Strasfogel wrote: Very droll. No jelly for you! On Fri, Dec 30, 2016 at 1:56 PM, MG via Mercedes

Re: [MBZ] How to remedy my heating problem - W123 300TDt

How much did Darvin want for it? Kyle Arola via Mercedes wrote: Ordered from ECS tuning. $50 including shipping. It says Mercedes-Benz part. They also had the mtc part that came up with the search... Kyle On Dec 30, 2016 6:17 PM, "Dimitri via Mercedes" wrote: Or the

Re: [MBZ] How to remedy my heating problem - W123 300TDt

If you want to be safe then get the one from the dealer. Just make sure that which ever one you get when you put it in drain the coolant down to below the valve level so that you don't have coolant above the seal in the solenoid area. Andrew Strasfogel via Mercedes wrote: OK please replay

Re: [MBZ] How to remedy my heating problem - W123 300TDt

It's Andrew! He only listens to people named obummer or Clin Ton fmiser via Mercedes December 30, 2016 at 5:55 PM Andrew wrote: OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues: This past summer I

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Classic center. Kyle Arola via Mercedes December 30, 2016 at 4:59 PM MTC is the only ones I can find. Even the ones that seem to be something else are the MTC. Where do I get something else! The stealership? Kyle ___

Re: [MBZ] HELP!! My '91 300D is Not Starting

The result will be the same, blown fuse. You have to get the gp wire that is touching the manifold clear of the manifold. (It could be more than one wire! Larry Turner via Mercedes December 30, 2016 at 3:54 PM Thx Kaleb, The relay in my 91 is a replacement,

Re: [MBZ] 80A Fuse

NO! just find which wire is touching it., move the terminal enough to clear the manifold 1/8" or so. Even if you pry it with a screwdriver. Larry Turner via Mercedes December 30, 2016 at 3:47 PM damn! it blows when the key goes to "Pre-glow" . sounds

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Fatal. Crush it. Kleb sez it is worth $110 a ton, delivered. I'll give ya $100 Andrew Strasfogel via Mercedes December 30, 2016 at 11:27 AM OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues: This

Re: [MBZ] 80A Fuse

Most likey, one terminal turned and is touching the intake manifold. They like to turn when you tighten them down. (all explained in a prior post) I am betting that turning on the key will result in a wasted fuse. Kaleb C. Striplin via Mercedes December 30,

Re: [MBZ] HELP!! My '91 300D is Not Starting

On Fri, 30 Dec 2016 20:09:38 -0500 Larry Turner via Mercedes wrote: > Hi Craig, I seem to have moved ahead before I read your posting. > Sorry. When you say "Small" end of the harness are you describing the > end that plugs into the relay? Yes. Phillip has good

Re: [MBZ] W124 Wagon

swap in a used blower. $15. not that hard, you have to take out the monowiper. Perfect time to lube it with Moly grease. Bob Rentfro via Mercedes December 30, 2016 at 12:40 PM Right? That's why I'm wondering if there is some underlying issue that makes them

Re: [MBZ] W124 Wagon

That father/son team in Calif used to get $15k for a 124 wagon that they put on front sheet metal from a post-faceluft vergasser, then painted. Andrew Strasfogel via Mercedes December 30, 2016 at 12:36 PM I wonder why the W124 model is so unloved. A W123 turbo

[MBZ] Fused

Larry. In the GP relay there are two plugs, one for control and the other for glow plugs,the one with the bigger contacts is for the GP's The glow plugs all go to one plug in the GP relay. It is a six pin plug and has 5 or 6 connections, one to each plug 1 to #1, 2 to #2 etc. If you unplug

Re: [MBZ] HELP!! My '91 300D is Not Starting

Hi Craig, I seem to have moved ahead before I read your posting. Sorry. When you say "Small" end of the harness are you describing the end that plugs into the relay? Larry On 12/30/2016 6:44 PM, Craig via Mercedes wrote: On Fri, 30 Dec 2016 16:54:18 -0500 Larry Turner via Mercedes

Re: [MBZ] HELP!! My '91 300D is Not Starting

We have gotten to the point where the fuses are not blowing. Everything is installed as it should be and it tried to start when we were cranking it to bleed the fuel lines. But the final line was bubbling and we stopped cranking. I haven't gone farther just yet but thought I'd see what

Re: [MBZ] HELP!! My '91 300D is Not Starting

Larry wrote: Well, I have more fuses and a new relay so I plan to put the new relay in and see what happens. Actually that's a easier procedure than trying to reach all those GPs with a MM.Worst case, I'll pull the fuel lines and take a closer look at the wiring harness. 1st things 1st,

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Curt wrote: Gets warm at low speed/sitting still? Classic monovalve. Somebody else already explained how the water slows the movement of the valve so it can't handle the high coolant flow at high speeds. I think if you unplug it you should still get full heat. Nope. That is a way to test

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Andrew wrote: OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues: This past summer I enjoyed reliably ICE COLD AC. This suggests monovalve is intact. Incorrect. The monovalve is only for the heater. When it fails due to a torn

Re: [MBZ] 80A Fuse

Larry wrote: Yeah, tried that and it immediately blew the fuse. And yes, I visually checked the wiring to the GPs - the ends of the GPs had the wire with a nut on it. Is there a plug to disconnect all the glow plugs from the relay? Unplug it and using an ohm meter check for 0 ohms rather

[MBZ] Last Moose Day of 2016

http://www.ktuu.com/content/news/Wednesday-Evening-Weather-KTUU-12-28-16-408575105.html --- clay > I turned my computer upside down and shook it, but the bookmark for what I'm > looking for didn't fall out. ___ http://www.okiebenz.com To search list

Re: [MBZ] HELP!! My '91 300D is Not Starting

On Fri, 30 Dec 2016 16:54:18 -0500 Larry Turner via Mercedes wrote: > Well, I have more fuses and a new relay so I plan to put the new relay > in and see what happens. Actually that's a easier procedure than > trying to reach all those GPs with a MM.Worst case, I'll

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Ordered from ECS tuning. $50 including shipping. It says Mercedes-Benz part. They also had the mtc part that came up with the search... Kyle On Dec 30, 2016 6:17 PM, "Dimitri via Mercedes" wrote: > Or the classic center > > Sent from my iPhone > > > On Dec 30, 2016, at

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Or the classic center Sent from my iPhone > On Dec 30, 2016, at 5:59 PM, Kyle Arola via Mercedes > wrote: > > MTC is the only ones I can find. Even the ones that seem to be something > else are the MTC. > > Where do I get something else! The stealership? > > Kyle > >

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Yes the dealer or one of the online dealer suppliers Sent from my iPhone > On Dec 30, 2016, at 4:59 PM, Kyle Arola via Mercedes > wrote: > > MTC is the only ones I can find. Even the ones that seem to be something > else are the MTC. > > Where do I get something else!

Re: [MBZ] How to remedy my heating problem - W123 300TDt

MTC is the only ones I can find. Even the ones that seem to be something else are the MTC. Where do I get something else! The stealership? Kyle On Dec 30, 2016 3:18 PM, "Kaleb C. Striplin via Mercedes" < mercedes@okiebenz.com> wrote: > Do not buy mtc > > Sent from my iPhone > > > On Dec 30,

Re: [MBZ] HELP!! My '91 300D is Not Starting

Thx Kaleb, The relay in my 91 is a replacement, I replaced it a couple years after I bought it. Well, I have more fuses and a new relay so I plan to put the new relay in and see what happens. Actually that's a easier procedure than trying to reach all those GPs with a MM.Worst case,

Re: [MBZ] 80A Fuse

damn! it blows when the key goes to "Pre-glow" . sounds suspiciously like the intake manifold will have to come off again! Not looking forward to that again! Larry On 12/30/2016 2:25 PM, Kaleb C. Striplin via Mercedes wrote: If the fuse blows immediately you have a short either in he

Re: [MBZ] W124 Wagon

It's a gasser. On Dec 30, 2016 12:40 PM, "Kaleb C. Striplin via Mercedes" < mercedes@okiebenz.com> wrote: > Is this one gas? Those are not worth much. > > Sent from my iPhone > > > On Dec 30, 2016, at 12:53 PM, MG via Mercedes > wrote: > > > > 1. It don't look as cool. >

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Do not buy mtc Sent from my iPhone > On Dec 30, 2016, at 1:46 PM, Andrew Strasfogel via Mercedes > wrote: > > OK please replay the conversation on monovalves - which brand should I > purchase? Avoid? Autohaus sells MTC. > > On Fri, Dec 30, 2016 at 2:40 PM, Kaleb C.

Re: [MBZ] W124 Wagon

Brakes? Forward and reverse gears? Lights work? Not stolen? -- Max Dillon Charleston SC '87 300TD '95 E300 On December 30, 2016 12:42:06 PM EST, Floyd Thursby via Mercedes wrote: >For that kind of money just buy it and drive it then pawn it off on >some >other poor

Re: [MBZ] How to remedy my heating problem - W123 300TDt

OK please replay the conversation on monovalves - which brand should I purchase? Avoid? Autohaus sells MTC. On Fri, Dec 30, 2016 at 2:40 PM, Kaleb C. Striplin via Mercedes < mercedes@okiebenz.com> wrote: > Hahahahaha > > Sent from my iPhone > > > On Dec 30, 2016, at 12:55 PM, MG via Mercedes

Re: [MBZ] Badges

Very droll. No jelly for you! On Fri, Dec 30, 2016 at 1:56 PM, MG via Mercedes wrote: > None. You have to wait till you get to 622K. If you go over that you > missed your last chance. > > Andrew Strasfogel via Mercedes wrote: > >> What sort of badge do I get for 355k

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Hahahahaha Sent from my iPhone > On Dec 30, 2016, at 12:55 PM, MG via Mercedes wrote: > > You need to dissect the dash and replace or clean the heater core. > > Andrew Strasfogel via Mercedes wrote: >> OK, I just did a long drive up and back to NYC with minimal heat

Re: [MBZ] W124 Wagon

Is this one gas? Those are not worth much. Sent from my iPhone > On Dec 30, 2016, at 12:53 PM, MG via Mercedes wrote: > > 1. It don't look as cool. > > 2. It's got a gas engine. > > Bob Rentfro via Mercedes wrote: >> Right? That's why I'm wondering if there is some

Re: [MBZ] W124 Wagon

Well I can't see the ad because my ip is blocked again but the 124 diesel wagons were bringing 8-10k a couple of years ago. They are far superior to the 123 wagons and are very very limited in availability being a 1 year only car. Sent from my iPhone > On Dec 30, 2016, at 12:36 PM, Andrew

Re: [MBZ] Santa made a delivery

I was driving my the crusher today and car bodies are up to 110 a ton, so that's better than $25 a ton Sent from my iPhone > On Dec 30, 2016, at 12:21 PM, Max Dillon via Mercedes > wrote: > > Agreed, should be a short day to remove rear axle, finish cutting free the >

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Your monovalve insert it torn Sent from my iPhone > On Dec 30, 2016, at 11:27 AM, Andrew Strasfogel via Mercedes > wrote: > > OK, I just did a long drive up and back to NYC with minimal heat output at > highway speeds. > > Observations/clues: > > This past summer I

Re: [MBZ] 80A Fuse

If the fuse blows immediately you have a short either in he wiring to the plugs or one of the plugs themselves is shorted Sent from my iPhone > On Dec 30, 2016, at 11:24 AM, Larry Turner via Mercedes > wrote: > > Yeah, tried that and it immediately blew the fuse. And

Re: [MBZ] HELP!! My '91 300D is Not Starting

Does the relay in your car have a strip along the top? If not then the relay is probably bad. It's been a while since I have messed with those but I know the 95s don't have a fuse, my 92 sd does not either. Maybe 91 still had the fuse Sent from my iPhone > On Dec 30, 2016, at 10:22 AM, Larry

Re: [MBZ] W124 Wagon

1. It don't look as cool. 2. It's got a gas engine. Bob Rentfro via Mercedes wrote: Right? That's why I'm wondering if there is some underlying issue that makes them loved less. I called the dude and he say the AC blower works intermittently, it has a "small" oil leak, but it starts and goes

Re: [MBZ] Badges

None. You have to wait till you get to 622K. If you go over that you missed your last chance. Andrew Strasfogel via Mercedes wrote: What sort of badge do I get for 355k miles? On Fri, Dec 30, 2016 at 6:46 AM, Dwight Giles via Mercedes < mercedes@okiebenz.com> wrote: Yes we have one criminal

Re: [MBZ] How to remedy my heating problem - W123 300TDt

You need to dissect the dash and replace or clean the heater core. Andrew Strasfogel via Mercedes wrote: OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues: This past summer I enjoyed reliably ICE COLD AC. This suggests monovalve is

Re: [MBZ] W124 Wagon

Right? That's why I'm wondering if there is some underlying issue that makes them loved less. I called the dude and he say the AC blower works intermittently, it has a "small" oil leak, but it starts and goes reliably. Bob R On Dec 30, 2016 11:36 AM, "Andrew Strasfogel via Mercedes" <

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

Everyone seems to have disliked his recent speech. I thought it was perfectly grammatical - where's the beef?. On Fri, Dec 30, 2016 at 1:04 PM, Curley McLain via Mercedes < mercedes@okiebenz.com> wrote: > THAT IS THE SOS. > > Floyd Thursby via Mercedes >> December

Re: [MBZ] W124 Wagon

I wonder why the W124 model is so unloved. A W123 turbo wagon in that condition would be worth 6x as much, more if it had a pedigree. On Fri, Dec 30, 2016 at 12:42 PM, Floyd Thursby via Mercedes < mercedes@okiebenz.com> wrote: > For that kind of money just buy it and drive it then pawn it off

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

THAT IS THE SOS. Floyd Thursby via Mercedes December 30, 2016 at 11:27 AM You mean the freench-speaking Jean F'n "Liveshot" Kerre', who has gravitas, and who, by the way, served in Vietnam? --FT Jean riding his girl's pink bike at Jetties Beach parking lot on

Re: [MBZ] W124 Wagon

For that kind of money just buy it and drive it then pawn it off on some other poor sucker when you are tired of it. --R On 12/30/16 12:40 PM, Bob Rentfro via Mercedes wrote: Looking at this: https://phoenix.craigslist.org/nph/cto/5938762324.html What should I look out for? Bob R

[MBZ] W124 Wagon

Looking at this: https://phoenix.craigslist.org/nph/cto/5938762324.html What should I look out for? Bob R ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] 80A Fuse

I don't think it's the relay, I'd expect that to fail open. I think you've got a shorted plug or wire. Maybe a wire pinched somewhere. You've been given the troubleshooting, it's time to pull out the multimeter and look for a dead short. Curt Sent from Yahoo Mail on Android On Fri, Dec 30,

Re: [MBZ] Santa made a delivery

Agreed, should be a short day to remove rear axle, finish cutting free the windshield. Second weekend in January is target date for me. -- Max Dillon Charleston SC '87 300TD '95 E300 On December 30, 2016 12:18:49 PM EST, Floyd Thursby via Mercedes wrote: >We need to

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Gets warm at low speed/sitting still? Classic monovalve. Somebody else already explained how the water slows the movement of the valve so it can't handle the high coolant flow at high speeds. I think if you unplug it you should still get full heat. Curt Sent from Yahoo Mail on Android On

Re: [MBZ] Santa made a delivery

I'll have to see what the various women in my life have in store for me, but that would probably work. --FT On 12/30/16 1:21 PM, Max Dillon wrote: Agreed, should be a short day to remove rear axle, finish cutting free the windshield. Second weekend in January is target date for me. -- Max

Re: [MBZ] How to remedy my heating problem - W123 300TDt

Global warming is a necessity! Something in the controller is not working? Can you get defroster as default? --FT On 12/30/16 12:27 PM, Andrew Strasfogel via Mercedes wrote: OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues:

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

You mean the freench-speaking Jean F'n "Liveshot" Kerre', who has gravitas, and who, by the way, served in Vietnam? --FT Jean riding his girl's pink bike at Jetties Beach parking lot on Nantucket and "walking" his dog. On 12/29/16 6:14 PM, Curley McLain via Mercedes wrote: We are so lucky

[MBZ] How to remedy my heating problem - W123 300TDt

OK, I just did a long drive up and back to NYC with minimal heat output at highway speeds. Observations/clues: This past summer I enjoyed reliably ICE COLD AC. This suggests monovalve is intact. This winter, engine temperature is normal - above 80. This suggests a broken thermostat is not the

Re: [MBZ] 80A Fuse

Yeah, tried that and it immediately blew the fuse. And yes, I visually checked the wiring to the GPs - the ends of the GPs had the wire with a nut on it. Anyway to repair relays? I'll still get the new one and maybe have a spare... Thanks for the reply! Larry On 12/30/2016 12:17 PM,

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

Rick wrote: > With what the departing POtuS is doing in the middle East, and in/to Russia, > it will truly be a challenge to his negotiation skills to keep us out of > WWIII. WWIII? We are already in that battle. WWIII is not a battle of TubeSock Cummins big equipment. WWIII is a battle that

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

I am sure a lot of the troglodytes are quite nice in real life. Not sure about the rest, however. On Fri, Dec 30, 2016 at 12:11 PM, Mountain Man via Mercedes < mercedes@okiebenz.com> wrote: > Kaleb wrote: > > There are some really weird people on here. At the top of the list is > Mountain Man,

Re: [MBZ] Santa made a delivery

We need to get that hulk off to the knackers, mama is starting to make "comments" about it. My timber framer buddy gave me a bunch of 12x12 cutoffs we can use to stack the thing on. --FT On 12/30/16 12:50 PM, Max Dillon via Mercedes wrote: Swarfega is the best I've tried on skin in recent

Re: [MBZ] 80A Fuse

Did you give a visual to make sure the plugs aren't obviously grounding out? If that looks okay I'd say pop the fuse in and give it a shot. Sometimes things just fail for no real reason... Curt Sent from Yahoo Mail on Android On Fri, Dec 30, 2016 at 10:50 AM, Larry Turner via

Re: [MBZ] Where's Kyle? Was Strasfogel pepper jelly

Kaleb wrote: > There are some really weird people on here. At the top of the list is > Mountain Man, followed by Poos. ...eh... take ti to banned, Kleb!! tin.man ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To

Re: [MBZ] Strasfogel pepper jelly

Andrew wrote: > Perhaps a course at Trump U to sharpen my skills? YOU are FIRED!!! tin.man ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to:

Re: [MBZ] A red Rolls Silver Shadow for Andrew

I suppose this rig could help could achieve economies of scale at my jalapeno pepper ranch. On Sat, Dec 24, 2016 at 8:38 AM, Mitch Haley via Mercedes < mercedes@okiebenz.com> wrote: > Merry Christmas! > > https://photos.smugmug.com/Other/Pictures-new/n-SwQsj/i- > 8BgKMdW/0/M/i-8BgKMdW-M.jpg > >

Re: [MBZ] Santa made a delivery

Swarfega is the best I've tried on skin in recent memory. Years ago GOOP was pretty good, or maybe non-diesel oil dirty hands were easier to clean? I'm looking forward to hearing from Rich and comparing myself next visit to his vast estate in the new year. Belated Christmas wishes to all! --

Re: [MBZ] Badges

What sort of badge do I get for 355k miles? On Fri, Dec 30, 2016 at 6:46 AM, Dwight Giles via Mercedes < mercedes@okiebenz.com> wrote: > Yes we have one criminal dealer here. Two others seem to be decent but I > mostly use a MB specialist Fred's Autohaus. Building is,surrounded by parts > cars.

Re: [MBZ] HELP!! My '91 300D is Not Starting

What's the cut off for "New" vs "old"? or is it all 602 & 603? I ask because the relay from the dealer for my '91 came with a fuse across the bottom. Thx Larry On 12/29/2016 9:21 AM, Kaleb C. Striplin via Mercedes wrote: It should not have a strip fuse on the new 602 and 603 engines

Re: [MBZ] 80A Fuse

Hi Gang - Picked up the new fuses today - the BAP Geon dealer sent the Relay back because I called and when ordering the fuses I opened my big mouth and said I don't need the Relay so they returned it. I had intended to buy the relay because my electrical troubleshoooting skills are

Re: [MBZ] OT: VW doesn't like buying back stripped TDIs

Yea they do seem nice I have driven several of them Sent from my iPhone > On Dec 30, 2016, at 8:35 AM, Curt Raymond wrote: > > Only in the Grand Cherokee, the 4cyl is for the Wrangler. > The eco diesel drives really nice, quiet and felt as powerful as the 5.7l > gasser.

Re: [MBZ] OT: VW doesn't like buying back stripped TDIs

Only in the Grand Cherokee, the 4cyl is for the Wrangler.The eco diesel drives really nice, quiet and felt as powerful as the 5.7l gasser. Not bad for a 3l v6. Curt Sent from Yahoo Mail on Android On Fri, Dec 30, 2016 at 9:27 AM, Kaleb C. Striplin via Mercedes

Re: [MBZ] OT: VW doesn't like buying back stripped TDIs

They already have a diesel for the jeeps and 1/2 trucks, the ecodiesel as they call it. Sent from my iPhone > On Dec 29, 2016, at 11:47 PM, Karl Wittnebel via Mercedes > wrote: > > Cummins motors have been electronically injected and therefore relatively > quiet for a

Re: [MBZ] Badges

Yes we have one criminal dealer here. Two others seem to be decent but I mostly use a MB specialist Fred's Autohaus. Building is,surrounded by parts cars. Dwight Giles Jr. 1982 300CD 2005 E320 4 matic Wickford RI On Dec 29, 2016 8:42 PM, "clay via Mercedes" wrote: > I