Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-12 Thread Dave M.
PROTECTED] Subject: Re: [MBZ] Turned up fuel on OM603, sans IC or WI Dave, Do you have a digital camera that can take short videos (30 seconds)? If so, there is a perfect co-pilot -just set the camera up so it can see the speedometer and EGT. And you can share the run with fellow listers too

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-11 Thread Mitch Haley
Andrew Cunningham wrote: I am designing a boost controller with an EGT Type-K feedback. Why don't you just spray H2O when the temp goes over 1200?

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-11 Thread Andrew Cunningham
] Subject: Re: [MBZ] Turned up fuel on OM603, sans IC or WI Dave, I was looking for the rate of increase during the run not just the end points. Within a typical (current config no WI) 0-100mph run how many seconds does it take to get to 900, 1000, 1100, 1200 ack 1300? The other thing

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-11 Thread Zeitgeist
Interesting idea Andrew. A couple of thoughts here, one being that most WI kits are either single or dual stage, and are boost signalled--e.g. stage one nozzle goes off @ 4psi and stage two goes off @ 10psi (or whatever pressure you want) which helps to prevent EGTs from reaching those temps in

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-10 Thread Dave M.
. :-) Best regards, Dave M. Boise, ID -- Date: Fri, 8 Jul 2005 20:38:28 -0400 From: Andrew Cunningham [EMAIL PROTECTED] Subject: Re: [MBZ] Turned up fuel on OM603, sans IC or WI Dave, I was looking for the rate of increase during

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-09 Thread Dave M.
injection kit in-hand but haven't had time to install it. :) +dm -- Date: Thu, 7 Jul 2005 12:56:09 -0400 From: Andrew Cunningham [EMAIL PROTECTED] Subject: Re: [MBZ] Turned up fuel on OM603, sans IC or WI Dave, I was wondering how quickly the EGTs increase

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-09 Thread Marshall Booth
Andrew Cunningham wrote: Dave, I was looking for the rate of increase during the run not just the end points. Within a typical (current config no WI) 0-100mph run how many seconds does it take to get to 900, 1000, 1100, 1200 ack 1300? The other thing that I was wondering was how long

Re: [MBZ] Turned up fuel on OM603, sans IC or WI

2005-07-09 Thread OK Don
Better hurry - there's only one on Amazon, $151, and it might be used. http://tinyurl.com/7aae3 I suggest it's time to study Bosch's Diesel Fuel Injection. The 1st edition ('94) is ISBN 1-56091-542-0 and is published by SAE. Not sure if they've updated it (to cover the latest systems), but