The original Sonett had the 3 cyl. 2 cycle engine. I owned at Sonett
III, '74, similar to this one - http://tinyurl.com/3ca7p5 . It was a
very fun car. Would have been more fun with more power though.
On 9/20/07, Rory <[EMAIL PROTECTED]> wrote:
> my dad had a saab dealership in albuquerque in the
Either way, they were way-fun lawn mower engines.
I'd "kill" to have one now.
D.
On 9/20/07, OK Don <[EMAIL PROTECTED]> wrote:
>
> I remember it as having around 36 HP - same as the 1200 VW engine. It
> sounded like a Singer sewing machine at idle.
>
> On 9/20/07, Wonko the Sane <[EMAIL PROTECT
There is a section where the Sprinter is running on two wheels.
http://www.spiegel.de/videos/
Look down the list of videos for "Crashtest". It's about eight down
right now
I don't understand a word of it, but it's still fun to watch.
--
OK Don, KD5NRO
Norman, OK
"There are three kinds of lie
I remember it as having around 36 HP - same as the 1200 VW engine. It
sounded like a Singer sewing machine at idle.
On 9/20/07, Wonko the Sane <[EMAIL PROTECTED]> wrote:
> That would be the engine -- three cylinders, two-cycle, 20 horsepower.
>
--
OK Don, KD5NRO
Norman, OK
"There are three kinds
my dad had a saab dealership in albuquerque in the mid 60's and picked up a
65 Saab 96 for my mom which she drove until the early 80's. Lots of
memories of that car.
saw this on youtube:
http://www.youtube.com/watch?v=dXVRdSbKDT8
--
Rory Morrison
Oroville, WA
1985 300SD
1982 300TD
That would be the engine -- three cylinders, two-cycle, 20 horsepower.
But more fun than a man should have with his pants on.
D.
On 9/20/07, OK Don <[EMAIL PROTECTED]> wrote:
>
> IIRC, the flat rate time for a major overhaul of the Saab engine was 8
> hours. There was a time when the 3 cyl. Saa
IIRC, the flat rate time for a major overhaul of the Saab engine was 8
hours. There was a time when the 3 cyl. Saab engine with a bit of
tuning was popular in a Lotus 11 chassis.
On 9/20/07, Wonko the Sane <[EMAIL PROTECTED]> wrote:
> A two-stroke has a definite "cool" factor to it.
>
> I can stil
The plane in which I flew at Cape Cod did 120 db at takeoff power. Some
young chick from OSHA showed up one afternoon and wanted to take
measurements. I put her in "my" seat (radio) and cranked up the engines. We
sort of BROKE her meter (needle wrapped around the right side stop). I did
ask her if
So did I - it wasn't that expensive, and I only had to do the job once.
> I broke down and bought the new pipe section when
> faced with that problem.
>
> ---Robert
--
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-Benjamin Disraeli
'90 300D, '87
> No that is not quite right, apparently the 6/71 numbers mean that it
> makes 6 horsepower and has 71 oil leaks :-)
Completely wrong. It's a decibel rating, the / was meant
to try to hide the decimal point!
-- Jim
___
http://www.okiebenz.com
For new parts s
A two-stroke has a definite "cool" factor to it.
I can still remember driving my first MIL's two-stroke Saab (93 I think,
help me out here Chip) in the early 70s, and at the time it was a well-used
vehicle.
Four on the column, shifted from 3rd to 4th at 30 mph going downhill.
It just radiated (a
Umnh, no the 2 stroke Diesel concept is alive and well.
http://www.greencarcongress.com/2006/05/a_lightweight_v.html
http://people.bath.ac.uk/ccsshb/12cyl/
http://www.aopa.org/pilot/features/future0008.html
http://www.2si.com/2si_Industrial.htm
http://www.mandiesel.com/
However in the medium segmen
No that is not quite right, apparently the 6/71 numbers mean that it
makes 6 horsepower and has 71 oil leaks :-)
Dan Weeks wrote:
> There were LOTS of 2-stroke diesels made, the most famous being the
> detroits. They were THE heavy diesel engine for marine and heavy
> vehicle use for decades
> that is used only for powering the rotor. You don't need a special
> winding and can power the rotor from one of the primary windings - but
> you have to lower the voltage a lot and there is enough current that
> you need a regulated switching power supply, or some kind of big-ass
> resistor.
E
> archer wrote:
>> Germany built a three cylinder two cycle car,
>
> Who did that, DKW? NSU/Auto Union/Audi?
> The Saab had an oil measuring cup in the gas cap, I think you were
> supposed
> to put regular 30W motor oil in it.
> Mitch.
___
DKW, I'm pretty s
No more two-strokes allowed in the US -- everything is gonna be
four-stroke from now on out. Horrible emissions.
Peter
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To
Very high emissions and very poor milage.
2-stroke diesel technology hit a dead end about 30 years ago, anything
still around is a left-over remnant. The combination of low
compression, inability to scavenge well, and reduced expansion
capability doomed the concept. The only advantage is low
> archer wrote:
>> Germany built a three cylinder two cycle car,
>
> Who did that, DKW? NSU/Auto Union/Audi?
> The Saab had an oil measuring cup in the gas cap, I think you were
> supposed
> to put regular 30W motor oil in it.
> Mitch.
___
DKW, I'm pretty sure
There were LOTS of 2-stroke diesels made, the most famous being the
detroits. They were THE heavy diesel engine for marine and heavy
vehicle use for decades in this country. THe engine was modular,
availalbe from 2 cyl to 12 cyl (maybe 16, I donno) versions. The most
popular was the 6/71--6
Robert & Tara Ludwick wrote:
> I don't know about ceramic in there, but given what a pain it would be
> to try and weld that thin old flex, and that it wouldn't likely last
> more than a week, I broke down and bought the new pipe section when
> faced with that problem.
Aren't you able to get a
I don't know about ceramic in there, but given what a pain it would be
to try and weld that thin old flex, and that it wouldn't likely last
more than a week, I broke down and bought the new pipe section when
faced with that problem.
---Robert
John Robbins wrote:
> John Robbins wrote:
>
Kaleb C. Striplin, work wrote:
> really? No kidding
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/m
Thanks Rich!!
Also thanks to Wilton & Kaleb!
Larry T (67 MGB, 74 911, 78 240D, 91 300D)
www.youroil.net for Oil Analysis and Weber Parts
Test Results http://members.rennlist.com/oil
PORSCHE POSTERS! youroil.net
Weber Carb Info http://members.rennlist.com/webercarbs
.
- Original Message
Uh, nooo. I think maybe they are talking about the cat thats in the 87's.
---
Kaleb C. Striplin
Cox Auto Trader
730 FSBO Supervisor
- Original Message -
From: "John Robbins" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Thursday, September 20, 2007 3:32 PM
Subject: Re: [MBZ]
really? No kidding
---
Kaleb C. Striplin
Cox Auto Trader
730 FSBO Supervisor
- Original Message -
From: "John Robbins" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Thursday, September 20, 2007 3:28 PM
Subject: [MBZ] 300D 2.5 Exhaust
> The car has developed an exhaust leak
John Robbins wrote:
> The car has developed an exhaust leak
>
Lets try again (somehow managed to mash a keyboard shortcut)
The car has developed an exhaust leak on the flex pipe... Since I don't
have a welder, and don't want to replace the whole thing took it to a
shop to get it replaced
The car has developed an exhaust leak
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/m
Here's my version
http://www.constructivity.net/oilsucker.htm
--R
LarryT wrote:
> Howdy -
> Can't figure out how to search the archives and I must have lost the email
> with the instructions but I recall someone having instructions for building
> an inexpensive Oil Sucker made from Home Depot
HOMEMADE /$2 TOPSIDER/OIL SUCKER
(This method of oil removal by suction works only if oil dipstick tube goes
to lowest point in oil pan, as in a Mercedes. Oil below bottom of dipstick
tube can't be removed by this method without sticking an oil evacuation tube
down the dipstick tube to bottom of
Google "cerlist diesel" and you'll find a 3cyl 85hp 2 cycle diesel was used in
the Jeep forward control series at one point in the late '50s and early '60s.
Cerlist apparently claimed that each cylinder of their engine could make 25hp
(I dunno why the 3 in the FC Jeep was 85hp). Supposedly they
http://www.okiebenz.com/archive/
---
Kaleb C. Striplin
Cox Auto Trader
730 FSBO Supervisor
- Original Message -
From: "LarryT" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Thursday, September 20, 2007 11:52 AM
Subject: [MBZ] Oil Sucker Instructions
> Howdy -
> Can't figure
Howdy -
Can't figure out how to search the archives and I must have lost the email
with the instructions but I recall someone having instructions for building
an inexpensive Oil Sucker made from Home Depot parts.
Does anyone have that info? If so, I'd really appreciate it.
Thanks!!
Larry T (6
Hans Neureiter wrote:
> My blower fuse (25A) blows after a few hours of ACC operation, faster
> if fan is run on high.
> I suspect a bad blower motor, but is it? How about the pre-resistors
> or the blower control?
> Can I supply + battery V directly to the motor and see what the amps are?
> The f
-- Original message --
From: Mitch Haley <[EMAIL PROTECTED]>
> archer wrote:
> > Germany built a three cylinder two cycle car,
>
> Who did that, DKW? NSU/Auto Union/Audi?
> The Saab had an oil measuring cup in the gas cap, I think you were supposed
> to put regular
http://cgi.ebay.com/ebaymotors/1987-Mercedes-300-TE-turbo-Diesel-Wagon_W0QQitemZ230173028146QQihZ013QQcategoryZ6330QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Not mine, no affiliation, ect.
Rick Knoble
'85 300 CD
'87 190 DT
___
http://www.okiebenz.com
For new parts
lol. Well. I like it. He is offering me the 420S for my price. That trips my
interst.
Bill
-Original Message-
>From: Mitch Haley <[EMAIL PROTECTED]>
>Sent: Sep 20, 2007 11:28 AM
>To: billr <[EMAIL PROTECTED]>, Mercedes Discussion List
>Subject: Re: [MBZ] Fw: Re: CarFax, please
>
>
>
Thats one of those cars I wish I would have kept. Damn.
---
Kaleb C. Striplin
Cox Auto Trader
730 FSBO Supervisor
- Original Message -
From: "Mitch Haley" <[EMAIL PROTECTED]>
To: "billr" <[EMAIL PROTECTED]>; "Mercedes Discussion List"
Sent: Thursday, September 20, 2007 10:28 AM
Subjec
On that diagram, F1-F2 is the winding in the Rotor. All the U points
and the two windings labeled "3" are the primary windings in the
housing that give you 110V each, or 220V in series with a center tap,
just like power from the utility. Z1 - Z2 is a winding in the housing
that is used only for pow
billr wrote:
> Do you still have Dan's 123LWB?.
I know he's still got a picture of it:
http://okiebenz.com/MVC-003S.JPG
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
T
Kaleb - Don't have your address on this computer. Do you still have Dan's
123LWB?. Guess I should also ask if you have a good vehicle for my daughter
and 3 kids [two in car seats[ for @ $3500? I'm thinking transport could be a
problem though.
BillR
-Forwarded Message-
>From: billr <[E
> You don't need anything fancy to control the excitation voltage. I've
> seen everything from a diode and a resistor, to a microprocessor board
> with fuzzy logic that also controls the throttle. Here is a basic
> troubleshooting guide:
>
> http://utterpower.com/Trouble.htm
Thanks, I'd already fo
FYI - I have a 15kw China Genset and get 15 ohms between the rings on
the rotor. I show no reading (infinite resistance) between the rotor
winding and ground.
-Dave Walton
On 9/20/07, dave walton <[EMAIL PROTECTED]> wrote:
> You don't need anything fancy to control the excitation voltage. I've
>
Two stroke in general never really took off in the car segment.
The disadvantage of 2 stroke Diesels is that they need a supercharger to
make em work. Why design a complicated 2 stroke engine when it is far
easier to build a four stroke.
Petrol two strokes don't need a supercharger and are relati
They were not diesel
Peter
-Original Message-
From: archer [mailto:[EMAIL PROTECTED]
Sent: 20 September 2007 15:06
To: Mercedes Discussion List
Subject: [MBZ] Why no 2 stroke diesels
- Original Message -
From: "Peter Merle" <[EMAIL PROTECTED]>
> Why does the 2 stoke diesel not
archer wrote:
> Germany built a three cylinder two cycle car,
Who did that, DKW? NSU/Auto Union/Audi?
The Saab had an oil measuring cup in the gas cap, I think you were supposed
to put regular 30W motor oil in it.
Mitch.
___
http://www.okiebenz.com
For new par
Wonko the Sane wrote:
>
> Everyone who is anyone will be there. Except Mitch -- still don't know about
> him. And one "should be there" won't be because of a scheduling conflict.
I became less likely yesterday when a muscle spasm took my back out.
The muscle should be too weak to spasm in a coup
- Original Message -
From: "Peter Merle" <[EMAIL PROTECTED]>
> Why does the 2 stoke diesel not exist in passenger cars ? Are the
> emmisions too high?
> Peter
--
Germany built a three cylinder two cycle car, a few of which were around
after WW-2.
Now, if we could only domesticate cats
Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of OK Don
Sent: Thursday, September 20, 2007 8:13 AM
To: Mercedes Discussion List
Subject: [MBZ] OT: Moose Thur
Robert Bigham wrote:
> My 1976 Ford pickup (build date November 1975) has lap belts only...
>
> I feel sort of naked sometimes driving it.
In Michigan, getting pulled over every 15 minutes would bring your
average speed down to bicycle levels.
Now that you mention it, my dad's '73 F100 only
Don't know about the wagon, but the sedan got the M104 in 1993.
Gary
1995 E320
On 9/19/07, James Zavesky <[EMAIL PROTECTED]> wrote:
> Nope 1994
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts ema
No MB content, but given our preoccupation with Bullwinkle
http://news.bbc.co.uk/player/nol/newsid_700/newsid_7002100/7002119.stm?bw=bb&mp=wm&asb=1&news=1&ms3=54
or
http://tinyurl.com/2ugg5p
--
OK Don, KD5NRO
Norman, OK
"There are three kinds of lies: lies, damn lies, and statistics."
-
You don't need anything fancy to control the excitation voltage. I've
seen everything from a diode and a resistor, to a microprocessor board
with fuzzy logic that also controls the throttle. Here is a basic
troubleshooting guide:
http://utterpower.com/Trouble.htm
-Dave Walton
On 9/20/07, Jim Cat
Many thanks to: Phillip, Mak, Mitch, Jim Cathey, Jim Friesen, and anyone I
missed for your help on the A/C. Just happened to get good prices on 7.5
and 35 mfd. capacitors from an A/C guy and tried them. Both the fan and
compressor work, but the control unit doesn't turn on the compressor. Whe
Ok, so who is that? Got a list?
---
Kaleb C. Striplin
Cox Auto Trader
730 FSBO Supervisor
- Original Message -
From: "Wonko the Sane" <[EMAIL PROTECTED]>
To: "Mercedes Discussion List"
Sent: Wednesday, September 19, 2007 10:27 PM
Subject: Re: [MBZ] presale: 300TE IowaQ
> Everyone who
2 strokes are not very efficient & the emissions are too high. Also, they
tend to have a very narrow power band.
Thanks,
Tom Hargrave
www.kegkits.com
256-656-1924
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Peter Merle
Sent: Thursday, September 20,
Why does the 2 stoke diesel not exist in passenger cars ? Are the
emmisions too high?
Peter
___
http://www.okiebenz.com
For new parts see official list sponsor: http://www.buymbparts.com/
For used parts email [EMAIL PROTECTED]
To Unsubscribe or change delivery
>> It looks like the center of the field winding might be, each
>> slip ring measures in the 5-9 ohm range to frame ground.
>> I'm guessing that's not good?
> How close are the ohm readings? Could the winding be center tapped to
> ground or someplace else? (Just guessing.)
It's _possible_, but I
Me, yes; her, no. I have failed as an MB parent...
BillR
-Original Message-
>From: Mitch Haley <[EMAIL PROTECTED]>
>Sent: Sep 19, 2007 10:32 PM
>To: billr <[EMAIL PROTECTED]>, Mercedes Discussion List
>Subject: Re: [MBZ] CarFax, please
>
>
>
>billr wrote:
>> At this point she is looking
From: "archer" <[EMAIL PROTECTED]>
>>> Did you check to see if the windings might be shorted to ground?
>> It looks like the center of the field winding might be, each
>> slip ring measures in the 5-9 ohm range to frame ground.
>> I'm guessing that's not good?
>> -- Jim
> How close are the ohm re
>> Did you check to see if the windings might be shorted to ground?
>
> It looks like the center of the field winding might be, each
> slip ring measures in the 5-9 ohm range to frame ground.
> I'm guessing that's not good?
>
> -- Jim
>
How close are the ohm readings? Could the winding be center t
You mean OpenOffice? :) www.openoffice.org
--
Luther KB5QHUAlma, Ark
'87 300SDL (272,xxx mi) head case
'85 Ford F250 6.9 diesel (x58,xxx mi) BioBeast
'82 300CD (166 kmi)
'82 300D (74 kmi) getting donor engine-sold
'85 300D (280,176) parts car sans engine
Quoting LarryT <[EMAIL PROTECTE
61 matches
Mail list logo