Hi all!
I have a 73 220d with power steering and I want to convert to manual steering.
Anyone have a manual steering box, steering column bakelite steering wheel
for sale?
Thanks!
-- next part --
An HTML attachment was scrubbed...
URL:
wires
separately.
At the fuse box, I removed the 20amp fuse from the socket and then put the
probes to the contacts.
On Mar 1, 2013, at 7:31 PM, Craig wrote:
On Fri, 1 Mar 2013 18:44:41 -0800 clay redgh...@comcast.net wrote:
Most recent update on the light issue.
I re-floated the solder
) lowest row toward the seat, not
firewall.
I am headed to the MBCA gathering in the morning. They will be putting cars on
the racks, and maybe this will get a diagnosis and remedy.
clay
On Mar 1, 2013, at 7:37 PM, Jim Cathey wrote:
Headlight for low beam is only getting 10.98volts
Headlamp
need to
strip the car down and rebuild it. That should at least deal with age related
items. Not going to happen, but I can still think.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL
While you are at it, replace your motor mounts. When the mounts fail, the
angle from the trans to the shaft changes and it puts increased stress on the
flex disks. Makes them fail faster.
clay
On Mar 3, 2013, at 12:22 PM, Rich Thomas wrote:
I did this on the 84 300SD a year or two ago so
. Indy
wants $900. I might be able to find time on BiL shop schedule to cut that by a
goodly amount. I already paid indy to swap in a thermostat. Should have done
the dang pump then, replaced the old hoses and tossed on new belts. One of the
while you are in there solutions.
clay
1974
Little over 25 years for me too. Not too secure feeling in Miami proper. Felt
better in Coral Gables, but you knew you were a target in a rental. Must have
been the same time tourists were getting shot, Miami Vice was big, and
Mariellitos were flooding the town.
clay
On Mar 4, 2013, at 1
places are on 20k lots. Not that I
want to tend garden or do work on that size estate.
clay
On Mar 4, 2013, at 5:52 PM, WILTON wrote:
I've been calling 'em vinyl villages for years. The 4 x 4 mesh that looks
like roll fencing is WWF - welded wire fabric and is used in concrete slabs
Maybe now our petro companies will be allowed back in and we can get a better
deal on diesel fuel for our cars. Maybe by July.
clay
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com
0.13 to 0.45 gal this past year
On Mar 5, 2013, at 5:01 PM, OK Don wrote:
On Tue, Mar 5, 2013 at 6:21 PM, Dieselhead 126die...@gmail.com wrote:
Maybe now our petro companies will be allowed back in and we can get a
better deal on diesel fuel for our cars. Maybe by July.
clay
Clay
socialist credentials, but was robbing the people and nation blind. Not going
to change, just the faces. Maybe the rich conservatives will decide to take a
hand for this round.
clay
On Mar 5, 2013, at 6:07 PM, Peter Frederick wrote:
Be careful what you wish for -- Venezuela is much more stable
I think the conservatives are not the ones in power being klepto. They kept
trying to toss Chavez and getting disappeared.
clay
On Mar 5, 2013, at 6:48 PM, Peter Frederick wrote:
The rich conservatives are the kleptocrats, hardy likely to improve things,
or in fact change them much
crap for keeping our older rides on the road
On Mar 6, 2013, at 6:08 PM, Kaleb C. Striplin wrote:
Parts.com
Sent from my iPhone
On Mar 6, 2013, at 7:47 PM, Rick Knoble rickkno...@hotmail.com wrote:
On Mar 6, 2013, at 7:37 PM, Kaleb C. Striplin ka...@striplin.net wrote:
I have not
Eckler has the same product but better prices
clay
On Mar 6, 2013, at 6:28 PM, Jaime Kopchinski wrote:
Thats a good point, Kaleb... Gary is a good choice here. One thing he does
better than anyone else: hes good at figuring out what parts are quality,
and which are Chinese junk
is that you will probably
have to do a complete replacement of all seals and rubber bits.
clay
On Mar 7, 2013, at 6:02 PM, Max Dillon wrote:
Thanks Dan.
Wow, not one positive comment.
I guess that an R107 is probably in my future, if we add a convertible to the
fleet.
--
Max Dillon
My brother had a 124. He was able to fund his mechanics retirement on that
car. Was in the shop more than the road and was finally traded for a dune
buggy.
On Mar 7, 2013, at 6:08 PM, Dan Penoff wrote:
You could pretty much say this about any Italian car, for that matter, so
don't be
?
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
http://www.funnyism.com/i/epicfail/34359
Not mine, no interest, yada yada
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
. Anybody thing NAPA
makes a good pump. And then there is Bosch. Opinions on which aftermarket
pump is the best bet?
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
http://murphyauction.com/Auction/Details/426
Real catalogue is coming out Wed. I am going to the preview and can scout out
any car you find of interest
clay
On Mar 12, 2013, at 8:44 AM, Donald Snook wrote:
Yep, the Snook car saga begins again.
Before you groan because I am trading cars
if not nerves.
clay
On Mar 13, 2013, at 6:43 AM, Donald Snook wrote:
Gerry wrote: Being a tort lawyer, Donald must certainly have claimed
whiplash since that's the only way anyone can get fair treatment from present
day insurors.
He will soon have enough enough pain and suffering money to buy any
http://www.funnyism.com/i/epicfail/34556
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Lot: 254 Qty: 1 Login to Bid
Year: 1990 Make: MERCEDES Model: 560SEC
Description: V8, AUTO, A/C, CRUISE, TILT, P/WDW, P/SEAT, P/LOCK , ODOMETER
READS: 192915 s/n: WDBCA45E7LA544031
Lot: 255 Qty: 1 Login to Bid
Year: 1997 Make: MERCEDES BENZ
http://seattle.craigslist.org/see/cto/3681626013.html
no interest, not mine
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
http://www.ebay.com/itm/Vintage-Jeppesen-E6B-2A-Flight-Computer-/330887756868?pt=Motors_Aviation_Parts_Gearvxp=mtrhash=item4d0a727c44
not mine
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987
about
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
___
http://www.okiebenz.com
For new and used parts go
Trooper Shoots Fairbanks Moose That Trampled Woman
http://www.ktuu.com/news/troopers-shoots-fairbanks-moose-that-trampled-woman-031913,0,922216.story?track=rss
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives
I am so pleased. The SLC has a bunch of corrosion, but I did not touch the
fuel injectors. I am sorry I left them, Be looking at going back in a week to
grab them.
clay
On Mar 21, 2013, at 6:40 AM, dsereta...@yahoo.com wrote:
Finding gold in a pick n pull is one of the most exciting
A valid idea. It would solve the issue with the power windows.
clay
On Mar 21, 2013, at 7:11 AM, Max Dillon wrote:
You should grab all the crank window parts, in the future you could convert
your car, or sell them to someone else.
--
Max Dillon
Charleston SC
'95 E300, '87 300TD, '73
Another valid point.
I was able to fix the issue in Gump, which was manual. I had electric things,
since there is magic involved and not pure mechanical physics
clay
On Mar 21, 2013, at 5:22 PM, OK Don wrote:
I had much more trouble (broken parts) with the manual windows in the W115
REALLY!?! I should hit the yard again and assist the louvers to find a new
home from Fleabay. Bound to get bid up to stupid level if they are unobtanium.
That should pay out enough that I can rebuild the Djet m117 from the PnP SLC
if I can get it past SWMBA
clay
On Mar 22, 2013, at 4:17 AM
http://www.apaindustries.com/uro/news/show/30
I wonder what this means
clay
On Mar 22, 2013, at 5:17 AM, Mitch Haley wrote:
Dan Penoff wrote:
I can get a URO mount for under $40 plus shipping. For that small of a
difference, why bother? Not to mention I KNOW the quality of the part I am
for having spilled
fluids. Metal parts can be vacuumed up with a large magnet, glass is the same
as gravel.
clay
On Mar 22, 2013, at 6:52 PM, Craig wrote:
On Wed, 20 Mar 2013 19:12:56 -0700 clay redgh...@comcast.net wrote:
Somebody had done the typical gut the car or break the good stuff
If you find one here, I can deliver it. Headed to Estes Park in June, so it
would be really close
clay
On Mar 24, 2013, at 1:56 PM, Kevin Kraly wrote:
I'm almost financially ready to buy another MB Klatta Klatta, and if the cars
were closer, I'd be very interested in that 'SDL! My '83 'SD
unpleasant features amplified.
Akin to a wine spritzer is to a pint of everclear.
clay
On Mar 24, 2013, at 2:00 PM, Gerry Archer wrote:
- Original Message - From: Peter Frederick psf...@earthlink.net
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Sunday, March 24, 2013
what you need
to do to get the good lens off and swapped onto where it wants to go.
clay
On Mar 26, 2013, at 8:48 AM, Randy Bennell wrote:
Is there a way to remove the plastic from the chrome?
My car has good chrome but a badly cracked plastic part on the passenger side.
I bought a pair
not at the asking price. You can snag a decent old SL for that, though you
will need to do some work to it. Not much panache in a red 250C
On Mar 26, 2013, at 2:13 PM, Dan Penoff wrote:
Desperate seller. Good opportunity for someone.
Jaime?
I too have come to that conclusion. It solidifies and makes it hard to move
things. Brake cleaner and penetrating lube solved that issue
clay
On Mar 26, 2013, at 8:15 PM, Jim Cathey wrote:
Is white lithium suitable for linkage rods if I pop them off socket and lube?
I won't use that crap
just let me know
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
On Mar 28, 2013, at 7:24 PM, Kevin Kraly wrote:
Estes park is about an hour's drive from
get me a picture of the part and where I should look. There is a 123 at PnP I
am headed to next week
clay
On Mar 29, 2013, at 6:04 AM, Andrew Strasfogel wrote:
123 People:
Mercedes has discontinued a vital part that I need to control leaks in my
1983 300TD. The part is a firewall drain
I find it very interesting. Illuminates the early impacts of these people on
northern england
clay
On Mar 30, 2013, at 4:35 PM, dsereta...@yahoo.com wrote:
Speaking of Greenland, is anyone watching the series Vikings? It's quite good.
Sent from my iPhone
On Mar 30, 2013, at 6:41 PM
I wear one to work on my cars. Even has the tri-star and name of #2 boy on the
chest
clay
On Mar 31, 2013, at 4:15 PM, Dieselhead wrote:
Ever want to look like Kent Bergsma with a spiffy navy blue service coat
(labcoat) to work on your Mercedes?
I have for sale 6 used blue lab coats
. I think they lost the data, as the CSA was not standard
english speaker and his screen was not showing information.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian
http://seattle.craigslist.org/see/pts/3717267774.html
not mine, no... uh, this would be s totally cool dumped into a R107
chassis interest
clay
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http
Goodness! That is a plethora of drive belt. Might have to go with the
assortment pack and see what fits best
clay
On Apr 1, 2013, at 9:19 PM, Fmiser wrote:
clay wrote:
I am in need of measurements for an older Sharp RP-155
turntable. Actually for the drive belt.
MCM Electronics
I will have to do the string trick.
clay
On Apr 1, 2013, at 11:38 PM, Fmiser wrote:
Fmiser wrote:
Here is the URL of the search for flat belt on MCM's site.
http://electronics.mcmelectronics.com/search?p=KKsrid=S8-UKSR01lbc=mcmelectronicsts=custompw=drive%20beltuid=758023617isort
That is an option I looked at. The drawback is having to then source a needle,
which was the route I went on rebuilding my own stereo system
clay
On Apr 2, 2013, at 5:25 AM, Gerry Archer wrote:
There are a number of turntables listed on ebay from $15 up. If you go to
the sellers websites
Rock auto? Cheap junk replacement maybe. Something from PnP would be real
factory item that would need the same paint and body work to make sure you have
the exact fit.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used
in business for a lead.
clay
On Apr 2, 2013, at 4:39 PM, Alex Chamberlain wrote:
On Apr 2, 2013 4:23 PM, Brian Toscano brian.tosc...@gmail.com wrote:
As Gerry mentioned, you may
consider taking it to a turntable shop.
I think Clay is trying to do it on the cheap, but there are surely
old
It is a 40 year old car. How vigorous do you expect to be driving an old
crate? Might fall apart from old age, so best to let it drive slowly than be
Racer X
clay
On Apr 2, 2013, at 8:15 PM, Peter Frederick wrote:
Even a 603 would be a slug in an R107. Very heavy, even with the 4.5L V8
and what car does the seat go in?
clay
On Apr 3, 2013, at 6:53 AM, Bob Rentfro wrote:
Does anyone have MB Tex skins laying around for a driver's seat they like
to sell me? I have to rebuild my driver's seat prontoit has managed to
give me a pinched nerve in my leg/hip (according to my PT
For a diesel.
If I drop a 601/602 into the SL, then just getting to speed from a stop would
be an Italian Tune up.
clay
On Apr 3, 2013, at 3:25 PM, Randy Bennell wrote:
I thought I was supposed to drive it flat out all of the time - Italian
tuneup - you know.
I am sure you folks have
Becker Europa AM/FM. Old fashion look with the push buttons. By that model
year, their may have been the option to get the tape players in the head unit
instead of as a daughter unit
clay
On Apr 4, 2013, at 11:37 AM, Randy Bennell wrote:
So, what should a Becker radio look like for a 1976
http://www.ebay.com/itm/mercedes-Porsche-classic-Becker-europa-ipod-car-radio-/221208093478?pt=Vintage_Car_Truck_Parts_Accessorieshash=item338107a326vxp=mtr
http://www.ebay.com/itm/BECKER-EUROPA-AM-FM-VINTAGE-RADIO-/111005256527?pt=Car_Audio_Videohash=item19d86dcb4fvxp=mtr
that may kill your sheep or cow
clay
On Apr 7, 2013, at 1:57 PM, WILTON wrote:
Is it just in the South? I haven't been up Nawth recently, but I doubt
littering is limited to the South.
Wilton
- Original Message - From: Brian Toscano brian.tosc...@gmail.com
To: Mercedes Discussion
Anybody else having a difficult time getting access to the inter webs? Mail
seems slow to download and the web sites are coming back timed out.
clay
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http
i tend to agree
On Apr 7, 2013, at 2:55 PM, Dan Penoff wrote:
Not here.
It's probably because you're on Comcast.
According to my brother, they suck and have done so consistently for years.
Dan
On Apr 7, 2013, at 5:52 PM, clay wrote:
Anybody else having a difficult time getting
http://seattletimes.com/html/opinion/2020721338_patriciafulleropedxml.html
Another one of the not my fault, not my responsibility sort. Probably does
pick up her trash, but not the mess she made of her life
clay
On Apr 7, 2013, at 5:55 PM, WILTON wrote:
Too many don't seem to give a damned
to teachers. or
working starbucks
clay
On Apr 8, 2013, at 5:15 PM, Curt Raymond wrote:
What? You mean a BA in English isn't a ticket to the good life?
/sarcasm
-Curt
Date: Mon, 8 Apr 2013 15:45:47 -0700
From: clay redgh...@comcast.net
To: Mercedes Discussion List mercedes@okiebenz.com
The comment section did seem rather polarized as to support for her
clay
On Apr 8, 2013, at 7:36 PM, Rich Thomas wrote:
Guess who she voted for, and still has Hope that things will Change. I guess
she is not down with the fundamental transformation.
I guess I shouldn't be political
upper level classes in your program are good at giving a basic level of
understanding, but will you use what you learn in your life later?
clay
On Apr 9, 2013, at 2:19 PM, Dan Penoff wrote:
No, it's not a surprise, but when you consider that when she was entering the
workforce with a high level
, the firefighters are choosing to
go out on disability than face forced retirement. This allows them to get a
bit less each month, but it is all tax free.
clay
On Apr 9, 2013, at 5:48 PM, Scott Ritchey wrote:
There are lots of confounding factors here. First, the economy is slow (we
don't need
Trying to fire clearly abusive cops who do very naughty things around Seattle
is nigh impossible. They got a peepee whack, then they get labor rep involved,
make a stink in court, and end up back on the job, ready to kick the feces out
of yet another welfare child.
clay
On Apr 10, 2013
has.
clay
On Apr 10, 2013, at 10:32 AM, Curt Raymond wrote:
I heard the same story. You're leaving out the part where many of the people
have literally no other job skills and even if they did there are no jobs for
them anywhere nearby...
Still, its crazy that the government doesn't at all
That is my M.O. Keep finding the stuff I already had in the parts area, then
it goes missing, but ends up just where I left it. In the mean time, the other
stuff goes misplaces, and I am on the hunt for more AWOL parts
clay
On Apr 10, 2013, at 5:43 PM, WILTON wrote:
Or can't find when I
instructions call for putting an initial coating of POR, then soak the patch
material (fiberglass works) and using the brush, mate it to the lower coat.
Give it a few minutes to set up/tack and paint more layers. Paint over it when
done
clay
On Apr 10, 2013, at 6:19 PM, Curt Raymond wrote
Hacker targets flight deck computers
A security researcher says he managed to hijack flight computer systems in
tests with a simulated aircraft.
Read more:
http://www.bbc.co.uk/news/technology-22107433
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple
Air France flight 440.
Better off hitch hiking with Ted Bundy
clay
On Apr 11, 2013, at 1:13 PM, Rich Thomas wrote:
No news here, Airbus has been doing that for some time.
--R
On 4/11/13 2:22 PM, clay wrote:
Hacker targets flight deck computers
A security researcher says he managed
Mr. Bundy would make me feel safer than the senator (D)ui from MA as companion
clay
On Apr 11, 2013, at 1:38 PM, Rich Thomas wrote:
You mean Ted Kennedy (who has been sober now for, what, 3 years?), though it
might be hard to tell the difference regarding outcomes.
--R
On 4/11/13 4
Atlanta?
Big uproar this week in Seattle that the children will not be able to be
graduated from the schools due to a lack of ability to pass a math test.
Damage to self esteem will be massive, for both the unqualified child as well
as his unhappy parent
clay
On Apr 11, 2013, at 1:44 PM
They decided to boycott the state mandated testing this past month, as it might
show them to be deficient in their ability to teach
clay
On Apr 11, 2013, at 2:44 PM, Randy Bennell wrote:
On 11/04/2013 3:56 PM, clay wrote:
Atlanta?
Big uproar this week in Seattle that the children
Hear! Hear!
Huzzah!
clay
On Apr 11, 2013, at 7:24 PM, Dieselhead wrote:
The highschools are doing a poor job of teaching the basics so the college
picks up and provides to a great extent, what we once assumed might be
learned by the end of highschool.
Randy
Ever read what
pressure line with
a pin hole that over time was able to empty the pan enough for the pump to not
be able to suck up enough oil.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware
cooler line would spray
it back and might allow the fan to disperse it in a manner one would find hard
to pin point.
clay
On Apr 12, 2013, at 9:10 AM, Randy Bennell wrote:
On 12/04/2013 11:01 AM, Tim Crone wrote:
I came off the interstate (a few miles but it was hot) and noticed that I
was idling
, or are you going with liquid cooling, coolmaster
stuff?
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
On Apr 12, 2013, at 11:25 AM, Dan Penoff wrote:
I
and gizmos
clay
On Apr 12, 2013, at 11:36 AM, Dan Penoff wrote:
Just looking using the CPU type the ones I see are really pricey. Is that due
to the type of CPU?
I need to do some research, but I had no idea I was looking at a potential
$300 bill for a motherboard. Ouch!
That being said, I'm
Bitcoins, buy all the bit coins!
clay
On Apr 12, 2013, at 5:15 PM, Scott Ritchey wrote:
Stocks might be a bit less vigorous if interest rates were anywhere near
normal. As it is, the market (and gold) is the only hope of keeping up with
inflation (except gold was already overpriced). I
Let me see if I can get one off the PnP car
clay
On Apr 14, 2013, at 5:07 PM, Jaime Kopchinski wrote:
Hi all,
I need a passenger side rear bumper shock for a 75 450SL... anyone have a
parts car?
Thanks,
Jaime
--
Jaime Kopchinski
http://www.jaimekop.com
http://www.stumbleupon.com/su/4LqSEa
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
___
http://www.okiebenz.com
For new
Boat shop would be a good place. They seem to have the top sider for around
half price of car stores.
clay
On Apr 15, 2013, at 9:26 AM, LarryT wrote:
Hi Gang,
My TopSider seems to be dieing (the vacuum pump no longer works even though I
oil it regularly) and I plan to replace it.I've
when a user of a neighboring portapotty lit a match to cover the stench of his
own deposits. This caused a domino explosion with all the poop huts creating
shrapnel in their sudden destruction.
Hey, it is about as good a theory as the other stupidity being spewed
clay
On Apr 15, 2013, at 5
and a w114, but
those are not the same shock
clay
On Apr 14, 2013, at 5:39 PM, Jaime Kopchinski wrote:
Great, thanks!
On Sun, Apr 14, 2013 at 8:15 PM, clay redgh...@comcast.net wrote:
Let me see if I can get one off the PnP car
clay
On Apr 14, 2013, at 5:07 PM, Jaime Kopchinski
a good soaking in WD-40 to try to keep humidity from seizing
them up.
Am I on a hopeless task here?
clay
On Apr 16, 2013, at 12:41 PM, Randy Bennell wrote:
Anyone got any Mercdes issues???
I could ask a dumb question but hopefully, someone has real issues.
We need to move the Boston issue
wash the
car in the all together
clay
On Apr 16, 2013, at 2:02 PM, Randy Bennell wrote:
Both I guess. They seem to salt the intersections more than other areas.
Randy
On 16/04/2013 3:32 PM, Andrew Strasfogel wrote:
Sand or salt? Or both?
On Tue, Apr 16, 2013 at 4:08 PM, Randy Bennell
trunk side is proper, the bumper side is not the same.
clay
On Apr 16, 2013, at 6:37 PM, OK Don wrote:
A lot of the 107 chassis is based on the 115 chassis - those shocks might
work.
On Tue, Apr 16, 2013 at 5:48 PM, clay redgh...@comcast.net wrote:
I was not able to get you the shock
Anchorage is in the warmer south central part. Less permafrost, but still a
long winter with snow and ice. Too cold for washing the salt and snot off the
car outside. It is pretty hard to fly in town, but between towns you can fly.
clay
On Apr 16, 2013, at 6:42 PM, OK Don wrote:
Cars? I
big ones.
clay
On Apr 16, 2013, at 7:09 PM, OK Don wrote:
While not the same as snow, OK has had 52 earthquakes so far today. We only
felt the two that were 4.7 and 4.6 though. Most were in the 2 - 3 range.
I've never seen so many in one day since I've been watching over the last
two years
and LCA are same
clay
On Apr 16, 2013, at 8:10 PM, Dieselhead wrote:
#1 Daughter called today. Said the tar shop sez the upper ball joint is a
goner on one side of the 107. Does anyone know if that is the same as a 115?
I believe the early 107s were UCA and LCA as on the 115. This is an 85 so
I do not have the large and good parts. I might be able to snag them the next
time I visit the PnP. Two R107 and a w114 in the yard, and I should be able to
get them. Prior to shipping the car to crushing, the vultures had taken the
suspension.
clay
On Apr 16, 2013, at 9:14 PM, Dieselhead
That is good too
clay
On Apr 16, 2013, at 5:05 PM, Dan Penoff wrote:
Maybe these might better be used for cores if you buy some good remans.
Dan
On Apr 16, 2013, at 7:48 PM, clay wrote:
D-Jet injectors
I was out trying to snag Jaime some bumper shocks, but also wanted
on it and install an appliance
bulb and see where the light goes.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
___
http
But that has been done before!
I did want to see if this would work. I had tried something akin to this on
tail light reflectors and it really had no impact
clay
On Apr 18, 2013, at 9:24 PM, Jim Cathey wrote:
why not see if you can revive a more solid, but still dread reflector.
I don't
I really liked the stuff Leno had, but wanted to see if plain old rattle can
would be able to do the job. How to vids seemed to make it look like it would
be much the same with krylon.The trick seems to be to use a bazillion
really light coats and then buff it
clay
On Apr 19, 2013, at 4
And they jacked a dude in a Benz to make a get away
clay
On Apr 19, 2013, at 5:02 AM, Mitch Haley wrote:
Chechen brothers, one dead.
Apparently not American left wingers, American right wingers, or Islamists.
http://www.nytimes.com/2013/04/20/us/boston-marathon-bombings.html?pagewanted=all_r
was the dead engine, body and some
interior parts. A pity nobody took the glass. Body was really straight but
ugly as sin with the paint flaking away. Oh, and the crusher took the blower,
which not a soul what brave enough to save. Good blower motor too.
clay
On Apr 16, 2013, at 8:19 PM, Mitch Haley
http://seattle.craigslist.org/see/cto/3740318341.html
http://seattle.craigslist.org/see/cto/3754226172.html
On Apr 14, 2013, at 9:00 PM, kayoooh @ Gmail wrote:
Hi folks,
I need your help in locating a low mileage turbocharged OM606.
Please send clear pictures along with price, year and
http://www.youtube.com/watch?v=wJ7niLYSVFo
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green, simple and ran
1995 E300D - Cleo - Used by the Queen of Denial
POS 1987 SDL - Beware Nigerian Scammers
___
http://www.okiebenz.com
Watching this I got the thought North Korea, here we come, but then figured
that with sequestration, the ability to train for that is gone until we get
better leadership.
clay
On Apr 19, 2013, at 11:45 PM, clay wrote:
http://www.youtube.com/watch?v=wJ7niLYSVFo
clay
1974 450sl
http://seattle.craigslist.org/sno/cto/3757715372.html
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
doing there? That is not where it usually is when I get into the
car. Hmm. Deep mystery. Put it back into park, turn the key, and there
we go.
I need more than coffee if I am going to be working on this thing.
clay
1974 450sl - Frosch - Two tone green
1972 220D - Gump - She is green
1 - 100 of 5495 matches
Mail list logo