Hi,
Just picked up a new sunroof gasket from my local stealer..any gotcha's I
need to be concerned about?
Looks straightforward..pull out the old one, (it's loose anyway) and press
the new one into the groove?
Angelo
1990 350SDL Rodbender 278k miles
Sent from my iPad
I've never done the job, so view this advice with a jaundiced eye.
I've the seal can only be installed using a block of wood and a rubber
mallet to pound it into the groove.
Max Dillon,
Charleston SC
___
http://www.okiebenz.com
To search list archives
Heard? ;)
Wilt
- Original Message -
From: Meade Dillon dillonm...@gmail.com
To: Mercedes Discussion List mercedes@okiebenz.com
Sent: Saturday, June 28, 2014 2:46 PM
Subject: Re: [MBZ] 126 Sunroof gasket
I've never done the job, so view this advice with a jaundiced eye.
I've
Thanks Wilton, second paragraph should read I've heard the seal...
Max Dillon,
Charleston SC
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery options go to:
Hi,
The sunroof gasket on my 1990 350 Rodbender SDL keeps pulling away from the
insert in the roof gets jammed in the sliding roof panel when it gets
lowered from vent to closed position. Usually in the drivers rear corner.
I can hold the gasket in place with something thin and gradually close
I believe the gasket is press fit into a channel. Sounds like yours has
come apart, time for a new gasket.
Max Dillon,
Charleston SC
On May 23, 2014 1:46 PM, Angelo Giaimo michaelangel...@gmail.com wrote:
Hi,
The sunroof gasket on my 1990 350 Rodbender SDL keeps pulling away from the
