Problem is Im having a hard time finding anything that big, in a deep
socket that is 12pt, most are 6pt
I would advise getting a 3/4 drive socket set because the nut on the
rear drive shafts is the same as the one at the back off the tranny and
those nuts are tight tight and need to be done up
A standard 3/4 drive socket works, you just can't get the square drive
all the way in but that is no problem because it is not that tight.
All the 3/4 socket sets I have come across have been 12 point. 6 point
is rare and expensive.
http://www.jimytools.com/products_HandTools01_1.htm I got the
What size is the nut on the rear output shaft flange deal? Is it 30mm
12pt or some special size? Looked locally and closest I can find are
some SAE sizes. What would the equivelant sae size be, if any? Bought
a 1 1/4 I believe and it would not work, a hair too big I think
--
Kaleb C.
On Sun, 04 May 2008 18:19:11 -0500 Kaleb C. Striplin
[EMAIL PROTECTED] wrote:
What size is the nut on the rear output shaft flange deal? Is it 30mm
12pt or some special size? Looked locally and closest I can find are
some SAE sizes. What would the equivelant sae size be, if any? Bought
thanks
Craig McCluskey wrote:
On Sun, 04 May 2008 18:19:11 -0500 Kaleb C. Striplin
[EMAIL PROTECTED] wrote:
What size is the nut on the rear output shaft flange deal? Is it 30mm
12pt or some special size? Looked locally and closest I can find are
some SAE sizes. What would the
I would advise getting a 3/4 drive socket set because the nut on the
rear drive shafts is the same as the one at the back off the tranny and
those nuts are tight tight and need to be done up tight tight. Not a
drama with the rear tranny flange because it is not that tight and
having a bad fit