Re: [MBZ] Coolant change
...I remembered him saying MB coolant (G-05) was good for 2 years. Regular coolant good for one... MB sez if the coolant is the right stuff, change it every three years. Modern MB change interval is fifteen yes fifteen years. With periodic examination, of cuss. Brake fluid is every two years which I had done today. Six months late, I hate to admit. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change testing
I bought meself an brake fluid tester a while back, twas sitting on the counter of the spare parts place, tempting me with the promise of telling me how much water is in the juice and sold itself by saying that if you buy me you can test your brakey fluid and know how much resistance there is. Hendrik who likes fancy gadgets On 13/07/12 10:00, relng...@aol.com wrote all this: MB sez if the coolant is the right stuff, change it every three years. Modern MB change interval is fifteen yes fifteen years. With periodic examination, of cuss. Brake fluid is every two years which I had done today. Six months late, I hate to admit. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] coolant change
...Two years is the recommended change interval for the proper MB/G-05 coolant, .Allan.. Not any more. RLE ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] coolant change
On Wed, 11 Jul 2012 21:59:49 -0400 (EDT) relng...@aol.com wrote: ...Two years is the recommended change interval for the proper MB/G-05 coolant, .Allan.. Not any more. What is the recommended change interval now? Craig ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
I have seen a lot of different types on MBs. also depends on if it is the original or a third party replacement. My '81 300TD had a little rubber/plastic plug thing, I think my '83 240D has a metal bung of some sort... -Curt Date: Mon, 31 Oct 2011 20:08:14 -0400 From: Allan Streib str...@cs.indiana.edu To: Mercedes Discussion List mercedes@okiebenz.com Subject: Re: [MBZ] Coolant change Q Message-ID: m1ty6oso0h@cs.indiana.edu Content-Type: text/plain; charset=us-ascii Dimitri Seretakis dsereta...@yahoo.com writes: Definitely pull the lower hose. Messing with the drain bolt is asking for trouble. I don't even think my W123 has a drain bolt. Not sure about the W116 have not changed it yet. I always just pull the lower hose. In general be very careful with any threaded fittings on the radiator. This includes oil cooler and transmission cooler connections. You must counter-hold the fitting with a second wrench when trying to open these connections. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Coolant change Q
I need to change out the coolant in my 76 115 300D. I have been intending to do it ever since I bought the car and it has been waiting for me, patiently, I hope. On Saturday, I changed the oil. A lovely job on these old devils where one must crawl under instead of standing upright with one's $2 oil sucker. (As an aside, I bought a more expensive one - to do the oil on the boats, but have yet to try it out.) I put a wrench on the drain plug in the bottom of the radiator but it did not appear to want to budge. Any one think that it is safe to put an impact wrench on it? I wondered if a bit of impact might be safer than a long breaker bar. Not sure that penetrating oil will do much going upwards and not anxious to put heat on it given things are soldered together etc. What other options do I have? Randy ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
Pull the lower hose. I need to change out the coolant in my 76 115 300D. I have been intending to do it ever since I bought the car and it has been waiting for me, patiently, I hope. On Saturday, I changed the oil. A lovely job on these old devils where one must crawl under instead of standing upright with one's $2 oil sucker. (As an aside, I bought a more expensive one - to do the oil on the boats, but have yet to try it out.) I put a wrench on the drain plug in the bottom of the radiator but it did not appear to want to budge. Any one think that it is safe to put an impact wrench on it? I wondered if a bit of impact might be safer than a long breaker bar. Not sure that penetrating oil will do much going upwards and not anxious to put heat on it given things are soldered together etc. What other options do I have? Randy ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
Brilliant. Now why didn't I think of that. On Mon, Oct 31, 2011 at 1:37 PM, Dieselhead 126die...@gmail.com wrote: Pull the lower hose. I need to change out the coolant in my 76 115 300D. I have been intending to do it ever since I bought the car and it has been waiting for me, patiently, I hope. On Saturday, I changed the oil. A lovely job on these old devils where one must crawl under instead of standing upright with one's $2 oil sucker. (As an aside, I bought a more expensive one - to do the oil on the boats, but have yet to try it out.) I put a wrench on the drain plug in the bottom of the radiator but it did not appear to want to budge. Any one think that it is safe to put an impact wrench on it? I wondered if a bit of impact might be safer than a long breaker bar. Not sure that penetrating oil will do much going upwards and not anxious to put heat on it given things are soldered together etc. What other options do I have? Randy __**_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com __**_ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/**archive/http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/**mailman/listinfo/mercedes_**okiebenz.comhttp://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
That is way too practical. Then I won't have cause to post more questions about how to repair the bung that I twisted out of my rad, or where the best place to buy a new rad is etc. I might have to try to start a new oil thread. Randy On 31/10/2011 2:16 PM, andrew strasfogel wrote: Brilliant. Now why didn't I think of that. On Mon, Oct 31, 2011 at 1:37 PM, Dieselhead126die...@gmail.com wrote: Pull the lower hose. I need to change out the coolant in my 76 115 300D. I have been intending to do it ever since I bought the car and it has been waiting for me, patiently, I hope. On Saturday, I changed the oil. A lovely job on these old devils where one must crawl under instead of standing upright with one's $2 oil sucker. (As an aside, I bought a more expensive one - to do the oil on the boats, but have yet to try it out.) I put a wrench on the drain plug in the bottom of the radiator but it did not appear to want to budge. Any one think that it is safe to put an impact wrench on it? I wondered if a bit of impact might be safer than a long breaker bar. Not sure that penetrating oil will do much going upwards and not anxious to put heat on it given things are soldered together etc. What other options do I have? Randy ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
Definitely pull the lower hose. Messing with the drain bolt is asking for trouble. Sent from my iPhone On Oct 31, 2011, at 6:15 PM, Randy Bennell rbenn...@bennell.ca wrote: That is way too practical. Then I won't have cause to post more questions about how to repair the bung that I twisted out of my rad, or where the best place to buy a new rad is etc. I might have to try to start a new oil thread. Randy On 31/10/2011 2:16 PM, andrew strasfogel wrote: Brilliant. Now why didn't I think of that. On Mon, Oct 31, 2011 at 1:37 PM, Dieselhead126die...@gmail.com wrote: Pull the lower hose. I need to change out the coolant in my 76 115 300D. I have been intending to do it ever since I bought the car and it has been waiting for me, patiently, I hope. On Saturday, I changed the oil. A lovely job on these old devils where one must crawl under instead of standing upright with one's $2 oil sucker. (As an aside, I bought a more expensive one - to do the oil on the boats, but have yet to try it out.) I put a wrench on the drain plug in the bottom of the radiator but it did not appear to want to budge. Any one think that it is safe to put an impact wrench on it? I wondered if a bit of impact might be safer than a long breaker bar. Not sure that penetrating oil will do much going upwards and not anxious to put heat on it given things are soldered together etc. What other options do I have? Randy ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
Dimitri Seretakis dsereta...@yahoo.com writes: Definitely pull the lower hose. Messing with the drain bolt is asking for trouble. I don't even think my W123 has a drain bolt. Not sure about the W116 have not changed it yet. I always just pull the lower hose. In general be very careful with any threaded fittings on the radiator. This includes oil cooler and transmission cooler connections. You must counter-hold the fitting with a second wrench when trying to open these connections. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
I don't believe I've ever had a problem with an MB coolant drain in the radiator. Most W123s will have a plastic plug with a screwdriver slot and an o-ring seal, they don't need to be super tight and don't break. The one on the 280 SE is a standard winged plug sort of drain, but it wasn't stuck either. Later cars even provide a tube to slip some hose over to cleanly drain the coolant, it's easy as pie. Not so much on my buddy's Jeep -- have to pull the grille and headlight surround to get to the stinking drain plug, which I need to do soon as the thermostat housing gasket is leaking. Should have done it when I did the hoses, but I didn't know it was leaking at the time. Peter On Oct 31, 2011, at 7:08 PM, Allan Streib wrote: Dimitri Seretakis dsereta...@yahoo.com writes: Definitely pull the lower hose. Messing with the drain bolt is asking for trouble. I don't even think my W123 has a drain bolt. Not sure about the W116 have not changed it yet. I always just pull the lower hose. In general be very careful with any threaded fittings on the radiator. This includes oil cooler and transmission cooler connections. You must counter-hold the fitting with a second wrench when trying to open these connections. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Coolant change Q
My '81 300TD had a little rubber/plastic plug thing, I think my '83 240D has a metal bung of some sort... -Curt Date: Mon, 31 Oct 2011 20:08:14 -0400 From: Allan Streib str...@cs.indiana.edu To: Mercedes Discussion List mercedes@okiebenz.com Subject: Re: [MBZ] Coolant change Q Message-ID: m1ty6oso0h@cs.indiana.edu Content-Type: text/plain; charset=us-ascii Dimitri Seretakis dsereta...@yahoo.com writes: Definitely pull the lower hose. Messing with the drain bolt is asking for trouble. I don't even think my W123 has a drain bolt. Not sure about the W116 have not changed it yet. I always just pull the lower hose. In general be very careful with any threaded fittings on the radiator. This includes oil cooler and transmission cooler connections. You must counter-hold the fitting with a second wrench when trying to open these connections. Allan -- 1983 300D 1979 300SD ___ http://www.okiebenz.com For new and used parts go to www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
